Work Area. Tool Use and Care. Personal Safety INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

Size: px
Start display at page:

Download "Work Area. Tool Use and Care. Personal Safety INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS"

Transcription

1

2 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Addresses practices not related to personal injury. Important Safety Instructions INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING When using tools, basic precautions should always be followed, including the following: Work Area a. Keep the work area clean and well lighted. Cluttered benches and dark areas increase the risks of electric shock, fire, and injury to persons. b. Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. The tool is able to create sparks resulting in the ignition of the dust or fumes. c. Keep bystanders, children, and visitors away while operating the tool. Distractions are able to result in the loss of control of the tool. Personal Safety a. Stay alert. Watch what you are doing and use common sense when operating the tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating the tool increases the risk of injury to persons. b. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair increases the risk of injury to persons as a result of being caught in moving parts. c. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the tool in unexpected situations. d. Use safety equipment. A dust mask, non-skid safety shoes and a hard hat must be used for the applicable conditions. Wear heavy-duty work gloves during use. e. Always wear eye protection. Wear ANSI-approved safety goggles. f. Always wear hearing protection when using the tool. Prolonged exposure to high intensity noise is able to cause hearing loss. Tool Use and Care a. Do not force the tool. Use the correct tool for the application. The correct tool will do the job better and safer at the rate for which the tool is designed. b. Disconnect the tool from the air source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool unintentionally. Turn off and detach the air supply, safely discharge any residual air pressure, and release the throttle and/or turn the switch to its off position before leaving the work area. c. Store the tool when it is idle out of reach of children and other untrained persons. A tool is dangerous in the hands of untrained users. Page 2 For technical questions, please call ITEM 60491

3 d. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that affects the tool s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. There is a risk of bursting if the tool is damaged. e. Use only accessories that are identified by the manufacturer for the specific tool model. Use of an accessory not intended for use with the specific tool model, increases the risk of injury to persons. Service a. Tool service must be performed only by qualified repair personnel. b. When servicing a tool, use only identical replacement parts. Use only authorized parts. Air Source a. Never connect to an air source that is capable of exceeding 200 psi. Over pressurizing the tool may cause bursting, abnormal operation, breakage of the tool or serious injury to persons. Use only clean, dry, regulated compressed air at the rated pressure or within the rated pressure range as marked on the tool. Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. b. WARNING! Do not exceed 100 PSI working air pressure during use. c. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool. Such gases are capable of explosion and serious injury to persons. SAVE THESE INSTRUCTIONS. Symbols and Specific Safety Instructions Symbol Definitions Symbol n o.../min PSI Property or statement No-load speed Revolutions or reciprocation per minute Pounds per square inch of pressure Chart continued in next column. Symbol ft-lb BPM CFM SCFM NPT NPS Property or statement Foot-pounds of torque Blows per minute Cubic Feet per Minute flow Cubic Feet per Minute flow at standard conditions National pipe thread, tapered National pipe thread, straight WARNING marking concerning Risk of Eye Injury. Wear ANSI approved eye protection. WARNING marking concerning Risk of Hearing Loss. Wear hearing protection. WARNING marking concerning Risk of Respiratory Injury. Wear NIOSH approved dust mask/respirator. WARNING marking concerning Risk of Explosion. Specific Safety Instructions 1. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 2. Do not exceed maximum 100 PSI. 3. Avoid unintentional starting. Prepare to begin work before turning on the tool. 4. Do not leave the tool unattended when it is plugged into compressor. Release the Trigger, and unplug it from its pneumatic air source before leaving. 5. Never point the Trigger at a human or an animal. 6. Use clamps (not included) or other practical ways to secure and support the workpiece to a stable platform. 7. This product is not a toy. Keep it out of reach of children. 8. WARNING: This product, when used for abrasive blasting and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm). (California Health & Safety Code , et seq.) ITEM For technical questions, please call Page 3

4 9. WARNING: The brass components of this product contain lead, a chemical known to the State of California to cause birth defects (or other reproductive harm). (California Health & Safety code , et seq.) 10. Obey the manual for the air compressor used to power this tool. 11. Install an in-line shutoff valve to allow immediate control over the air supply in an emergency, even if a hose is ruptured. 12. If any abnormal vibration occurs, stop use immediately. Silicosis and Aluminum Oxide Warnings Warning: Abrasive blasting with sand containing crystalline silica can cause serious or fatal respiratory disease. Exposure to crystalline silica may cause silicosis (a serious lung disease), cancer and death. Exposure to aluminum oxide (a dust generated from material removing processes) can result in eye, skin and breathing irritation. Always use a NIOSH (National Institute for Occupational Safety and Health) approved respirator and safety goggles. Avoid skin exposure. Proper ventilation in the work area is required. Read and understand the 10 recommended measures below to reduce crystalline silica exposures in the workplace and prevent silicosis and silicosis related deaths. NIOSH recommends the following measures to reduce crystalline silica exposures in the workplace and prevent silicosis and silicosis-related deaths: 2. Conduct air monitoring to measure worker exposures. 3. Use containment methods such as blast-cleaning machines and cabinets to control the hazard and protect adjacent workers from exposure. 4. Practice good personal hygiene to avoid unnecessary exposure to silica dust. 5. Wear washable or disposable protective clothes at the work site. Shower and change into clean clothes before leaving the work site to prevent contamination of cars, homes and other work areas. 6. Use respiratory protection when source controls cannot keep silica exposures below the NIOSH REL. 7. Provide periodic medical examinations for all workers who may be exposed to crystalline silica. 8. Post signs to warn workers about the hazard and to inform them about required protective equipment. 9. Provide workers with training that includes information about health effects, work practices and protective equipment for crystalline silica. 10. Report all cases of silicosis to State health departments and to OSHA or the Mine Safety and Health Administration (MSHA) 11. The warnings and precautions discussed in this manual cannot cover all possible conditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator. 1. Prohibit silica sand (or other substances containing more than 1% crystalline silica) as an abrasive blasting material and substitute less hazardous materials. SAVE THESE INSTRUCTIONS. Page 4 For technical questions, please call ITEM 60491

5 Functional Description Specifications Nozzle Sizes Max. Air Pressure Air Inlet 2 mm (Fine) 2.5 mm (Medium) 3 mm / 3.5 mm (Coarse Grit) 100 PSI 3/8 IN NPT Initial Tool Set Up/Assembly Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Note: This air tool may be shipped with a protective plug covering the air inlet. Remove this plug before set up. Assembly 1. The Valve is equipped with four different size Ceramic Nozzles (37a-d) for fine, medium, and course grit. 2. To install a Ceramic Nozzle, unscrew and remove the Nozzle Cap Nut (39). Place the Gasket (36) against the Adapter (35) and place the Ceramic Nozzle against the Gasket. 3. Insert the corresponding size Rubber Adapter (38) onto the Ceramic Nozzle. Then, firmly screw the Nozzle Cap Nut back onto the Adapter. Air Supply Setup TO PREVENT SERIOUS INJURY FROM EXPLOSION: Use only clean, dry, regulated, compressed air to power this tool. Do not use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool. 1. To attach a grit supply hose - 3/8-18 NPT (not included) to the Valve, wrap approximately 3 of pipe thread sealer tape (not included) around the male threads at the end of the grit supply hose. Then, firmly tighten the grit supply hose onto the Intake Connector (34) of the Valve. 2. Incorporate a filter, regulator with pressure gauge, dryer, in-line shutoff valve, and quick coupler for best service, as shown on Figure A on page 6 and Figure B on page 7. An in-line shutoff ball valve is an important safety device because it controls the air supply even if the air hose is ruptured. The shutoff valve should be a ball valve because it can be closed quickly. Note: An oiler system should not be used with this tool. The oil will mix with the material being propelled, causing poor results. 3. Attach an air hose to the compressor s air outlet. Connect the air hose to the air inlet of the tool. Other components, such as a coupler plug and quick coupler, will make operation more efficient, but are not required. WARNING! TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Do not install a female quick coupler on the tool. Such a coupler contains an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air flow, and therefore tool performance, can be hindered by undersized air supply components. 4. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. 5. Close the in-line shutoff valve between the compressor and the tool. 6. Turn on the air compressor according to the manufacturer s directions and allow it to build up pressure until it cycles off. 7. Adjust the air compressor s output regulator so that the air output is enough to properly power the tool, but the output will not exceed the tool s maximum air pressure of 100 PSI at any time. Adjust the pressure gradually, while checking the air output gauge to set the right pressure range. 8. Inspect the air connections for leaks. Repair any leaks found. 9. If the tool will not be used at this time, turn off and detach the air supply and safely discharge any residual air pressure to prevent accidental operation. Note: Residual air pressure should not be present after the tool is disconnected from the air supply. However, it is a good safety measure to attempt to discharge the tool in a safe fashion after disconnecting to ensure that the tool is disconnected and unpowered. ITEM For technical questions, please call Page 5

6 Figure A: Portable Air Supply Setup Lubricated Tools B C D A E F A Non-lubricated Tools B G C A E H Description Function A Air Hose Connects air to tool B Filter Prevents dirt and condensation from damaging tool or work piece C Regulator Adjusts air pressure to tool D Lubricator (optional) For air tool lubrication E Coupler and Plug Provides each connection F Leader Hose (optional) Increases coupler life G Air Cleaner / Dryer (optional) Prevents water vapor from damaging work piece H Air Adjusting Valve (optional) For fine tuning airflow at tool Page 6 For technical questions, please call ITEM 60491

7 Figure B: Stationary Air Supply Setup Slope C D E G Lubricated Tools C J K L M O H B B A A F F C H Non-lubricated Tools I J L M N Description Function A Vibration Pads For noise and vibration reduction B Anchor Bolts Secures air compressor in place C Ball Valve Isolates sections of system for maintenance D Isolation Hose For vibration reduction E Main Air Line - 3/4 minimum recommended Distributes air to branch lines F Ball Valve To drain moisture from system G Branch Air Line -1/2 minimum recommended Brings air to point of use H Filter Prevents dirt and condensation from damaging tool or work piece I Air Cleaner / Dryer (optional) Prevents water vapor from damaging work piece J Regulator Adjusts air pressure to tool K Lubricator For air tool lubrication L Air Hose Connects air to tool M Coupler and Plug Provides each connection N Air Adjusting Valve For fine tuning airflow at tool O Lead Hose Increases coupler life F ITEM For technical questions, please call Page 7

8 Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use tool until repaired. Tool Set Up TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY: Do not adjust or tamper with any control or component in a way not specifically explained within this manual. Improper adjustment can result in tool failure or other serious hazards. Work Piece and Work Area Set Up 1. Designate a work area that is clean and well lit. The work area must not allow access by children or pets to prevent distraction and injury. 2. Route the air hose along a safe route to reach the work area without creating a tripping hazard or exposing the air hose to possible damage. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. 3. There must not be hazardous objects (such as utility lines or foreign objects) nearby that will present a hazard while working. CAUTION! Prior to sandblasting, protect other people (and property) in the work area from flying debris by providing barriers or shields. Always wear appropriate clothing and safety gear when operating the Deadman Valve. General Operating Instructions 1. If possible, place the workpiece inside a sandblast cabinet (not included). Otherwise, isolate the workpiece to make sure no damage can occur to nearby walls, tools, equipment, or other property. 2. Install the desired size Ceramic Nozzle (37) and Rubber Adapter (38) on the Deadman Valve. 4. Connect the grit supply hose to the Valve. To keep the grit supply hose out of the way, hang it over your shoulder. 5. Turn on the sandblaster unit (not included). 6. Grip the Valve firmly, aim it at the workpiece, and squeeze the Trigger (42) while slowly moving the tool in a circular or right to left motion. 7. Continue moving in a circular or right to left motion until you have achieved the desired appearance (finish) on the workpiece. 8. When the sandblasting job is completed, release pressure on the Trigger (42) to turn off the Valve. Turn off the sandblaster unit. 9. Turn off the air compressor. Squeeze the Trigger once to release any compressed air. Disconnect the Valve from its air supply. 10. Clean, then store the tool indoors out of children s reach. Page 8 For technical questions, please call ITEM 60491

9 User Maintenance Instructions Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Detach the air supply and safely discharge any residual air pressure in the tool before performing any inspection, maintenance, or cleaning procedures. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have the problem corrected before further use. Cleaning, Maintenance, and Lubrication Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular operation of the air-operated tool. 1. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, clogged Ceramic Nozzle, damaged supply hose, cracked or broken parts, and any other condition that may affect its safe operation. Do not use damaged equipment. 2. AFTER USE, clean external surfaces of tool with a clean, moist cloth. If necessary, use a mild detergent. WARNING! Do not use solvents or immerse in liquids, as damage to the Dead Man Valve may occur. 3. Store in a dry, secure area out of reach of children. Troubleshooting Problem Possible Causes Likely Solutions Tool will not start. 1. Compressor not on. 2. Air line not connected properly. 1. Turn compressor on. 2. Check that air line is connected. Blast flow surges / Air pressure too low. Increase air pressure. Excessive abrasive consumption. Clogging and plugging Excessive debris in abrasive. Purge and filter abrasive. of blast flow. Lack of abrasive flow. 1. Bag empty. 2. Moisture in abrasive 3. Not enough air pressure. 4. Air hose kinked. 5. Excessive debris in abrasive. 1. Fill Bag 2. Use dry abrasive. 3. Increase air pressure. 4. Un-kink air hose. 5. Clean or filter abrasive. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect air supply before service. ITEM For technical questions, please call Page 9

10 Parts List Part Description Qty 31 Upper Body 1 32 Lower Body 1 33 Metal Pipe 1 34 Intake Connector (3/8 IN. -18 NPT) 1 35 Adapter 1 36 Gasket 1 37A 2mm Ceramic Nozzle 1 37B 2.5mm Ceramic Nozzle 1 37C 3mm Ceramic Nozzle 1 37D 3.5mm Ceramic Nozzle 1 38 Rubber Adapter 4 Part Description Qty 39 Nozzle Cap Nut 1 40 Screw (ST4.2x12) 2 41 Screw (ST4.2x12) 4 42 Trigger 1 43 Roll Pin 1 44 Spring 1 45 Rubber Pad 1 46 Screw (M3x25) 1 47 Pad 1 48 Nut (M3) 1 49 Abrasive Gun Assembly (not shown) 1 Note: Parts for this manual are numbered PLEASE READ THE FOLLOWING CAREFULLY NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Page 10 For technical questions, please call ITEM 60491

11 Assembly Diagram Record Product s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Replacement parts are not available for this item. ITEM For technical questions, please call Page 11

12 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent, special or consequential damages arising from the use of our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS. To take advantage of this warranty, the product or part must be returned to us with transportation charges prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise. If our inspection verifies the defect, we will either repair or replace the product at our election or we may elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will return repaired products at our expense, but if we determine there is no defect, or that the defect resulted from causes not within the scope of our warranty, then you must bear the cost of returning the product. This warranty gives you specific legal rights and you may also have other rights which vary from state to state Mission Oaks Blvd. PO Box 6009 Camarillo, CA (800)

Abrasive Blasting Dead Man Valve

Abrasive Blasting Dead Man Valve Abrasive Blasting Dead Man Valve Item 92189 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is

More information

Offset head dual chuck

Offset head dual chuck Offset head dual chuck Tire inflator 90670 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result

More information

Abrasive Spot Blaster Gun

Abrasive Spot Blaster Gun Abrasive Spot Blaster Gun Item 93221 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is intact

More information

Portable Compressed CO 2 Regulator

Portable Compressed CO 2 Regulator Portable Compressed CO 2 Regulator 99901 Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

COMPACT METAL bender 99826

COMPACT METAL bender 99826 COMPACT METAL bender 99826 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011

60 farm jack. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011 60 farm jack 66183 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Model ASSEMBLY and OPERATING INSTRUCTIONS

Model ASSEMBLY and OPERATING INSTRUCTIONS QUICK CHANGE AIR BRUSH KIT Model 93506 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

pneumatic dent puller

pneumatic dent puller Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

IMPORTANT SAFETY INFORMATION

IMPORTANT SAFETY INFORMATION WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury

More information

2000 lb manual winch

2000 lb manual winch 2000 lb manual winch Model 41694 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA 93011

More information

20 Gallon Portable Oil Lift Drain

20 Gallon Portable Oil Lift Drain 20 Gallon Portable Oil Lift Drain Item 66786 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. When unpacking, make sure that the product is

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

AIR INLINE METAL SHEAR

AIR INLINE METAL SHEAR AIR INLINE METAL SHEAR ASSEMBLY and OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 93011 Copyright 1997 by Harbor Freight Tools. All rights reserved. No portion of this manual or any artwork

More information

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS

IMPACT WRENCH ASSEMBLY AND OPERATING INSTRUCTIONS 1 / 2 COMPACT AIR TWIN HAMMER IMPACT WRENCH 94802 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS

1/2 Twin Hammer Composite. Air Impact Wrench ASSEMBLY AND OPERATING INSTRUCTIONS 1/2 Twin Hammer Composite Air Impact Wrench 95098 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

1/4 COMPOSITE AIR DIE GRINDER

1/4 COMPOSITE AIR DIE GRINDER 1/4 COMPOSITE AIR DIE GRINDER 95029 ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

6 DUAL ACTION AIR SANDER

6 DUAL ACTION AIR SANDER 6 DUAL ACTION AIR SANDER Model 42966 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ

More information

Heavy duty English wheel

Heavy duty English wheel Heavy duty English wheel 65619 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

3 COMPOSITE AIR CUT-OFF TOOL

3 COMPOSITE AIR CUT-OFF TOOL 3 COMPOSITE AIR CUT-OFF TOOL 95028 ASSEMBLY and OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

pistol grip air shear

pistol grip air shear Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS Safety Setup Operation Maintenance Safety...2 Specifications...5 Setup...6 Operation...10 Table of Contents Maintenance...12 Parts List and Diagram...14 Warranty...16 WARNING SYMBOLS AND DEFINITIONS This

More information

INTENDED USE TECHNICAL SPECIFICATIONS

INTENDED USE TECHNICAL SPECIFICATIONS 1/2IN. HEAVY-DUTY AIR IMPACT WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

AIR OVER HYDRAULIC ATV/MOTORCYCLE LIFT SET UP AND OPERATING INSTRUCTIONS

AIR OVER HYDRAULIC ATV/MOTORCYCLE LIFT SET UP AND OPERATING INSTRUCTIONS AIR OVER HYDRAULIC ATV/MOTORCYCLE LIFT SET UP AND OPERATING INSTRUCTIONS Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. SAVE THIS MANUAL

More information

OWNER S MANUAL. Page: 1 of 8

OWNER S MANUAL. Page: 1 of 8 Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal

More information

STRAIGHT LINE MINI SANDER

STRAIGHT LINE MINI SANDER STRAIGHT LINE MINI SANDER Model 97956 SET up AND OpERATING INSTRucTIONS Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

pneumatic dust collector

pneumatic dust collector pneumatic dust collector Model 96450 Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo, CA

More information

Air over Hydraulic. Model 98178

Air over Hydraulic. Model 98178 Air over Hydraulic ATV/Motorcycle Lift Model 98178 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at:

More information

Air Hammer Model 32940

Air Hammer Model 32940 Air Hammer Model 32940 Assembly and Operation Instructions 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

More information

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product.

Instruction Manual LIMITED 1 YEAR WARRANTY. Hydraulic Punch Driver Read this material before using this product. Instruction Manual Hydraulic Punch Driver 902-483 LIMITED 1 YEAR WARRANTY We make every effort to assure that its products meet high quality and durability standards, and warrant to the original purchaser

More information

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL

Composite Pistol-Type Air Needle Scaler OWNER S MANUAL Composite Pistol-Type Air Needle Scaler OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

1 DRIVE INDUSTRIAL IMPACT WRENCH

1 DRIVE INDUSTRIAL IMPACT WRENCH 1 DRIVE INDUSTRIAL IMPACT WRENCH 92622 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2004 by Harbor Freight

More information

8 TON AIR/MANUAL FLAT BOTTOM JACK

8 TON AIR/MANUAL FLAT BOTTOM JACK 8 TON AIR/MANUAL FLAT BOTTOM JACK Model 95967 OPERATION INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

3/8 mini air ratchet wrench

3/8 mini air ratchet wrench 3/8 mini air ratchet wrench 99898 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS

LUBRICATOR ASSEMBLY AND OPERATING INSTRUCTIONS AIR FILTER, REGULATOR AND LUBRICATOR 4035 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 004 by Harbor Freight

More information

20 TON SHOP PRESS WITH OIL FILTER CRUSHER

20 TON SHOP PRESS WITH OIL FILTER CRUSHER 20 TON SHOP PRESS WITH OIL FILTER CRUSHER 65330 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

PNEUMATIC AIR KNIFE WINDSHIELD REMOVER

PNEUMATIC AIR KNIFE WINDSHIELD REMOVER PNEUMATIC AIR KNIFE WINDSHIELD REMOVER Model 97848 Set up and Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ

More information

pneumatic air scraper kit

pneumatic air scraper kit pneumatic air scraper kit Model 95826 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd.,

More information

Model Read this material before using this product. Failure to do so can result in serious injury.

Model Read this material before using this product. Failure to do so can result in serious injury. BENCHTOP planishing hammer Model 97028 ASSEMBLY And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

6" COMPOSITE PALM GRIP RANDOM ORBITAL SANDER

6 COMPOSITE PALM GRIP RANDOM ORBITAL SANDER 6" COMPOSITE PALM GRIP RANDOM ORBITAL SANDER 65173 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can

More information

3 AIR HIGH SPEED CUTTER

3 AIR HIGH SPEED CUTTER 3 AIR HIGH SPEED CUTTER 90114 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Reciprocating saw attachment

Reciprocating saw attachment Reciprocating saw attachment Model 96635 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

40 lb. capacity floor blast cabinet

40 lb. capacity floor blast cabinet Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

6 digital caliper with case

6 digital caliper with case 6 digital caliper with case Model 98563 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

4-in-1 Professional Inflator Kit

4-in-1 Professional Inflator Kit 4-in-1 Professional Inflator Kit Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety

More information

Read this material before using this product. Failure to do so can result in serious injury.

Read this material before using this product. Failure to do so can result in serious injury. Laser In-Line Air Nibbler 65707 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

300 Lbs. Motorcycle Scissor Lift

300 Lbs. Motorcycle Scissor Lift 300 Lbs. Motorcycle Scissor Lift 65318 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

1/2 DRIVE AIR IMPACT WRENCH

1/2 DRIVE AIR IMPACT WRENCH 1/2 DRIVE AIR IMPACT WRENCH 2 YEAR WARRANTY 1110NM MAX TORQUE LOW AIR CONSUMPTION TWIN HAMMER MECHANISM K13204 ED2 Sept 15 Table of Contents 1/2 DRIVE AIR IMPACT WRENCH Know Your Product...1 General Safety

More information

40 lb. Portable Soda

40 lb. Portable Soda 40 lb. Portable Soda Blaster 67625 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

Hole cutter. Model 97194

Hole cutter. Model 97194 Hole cutter Model 97194 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product

More information

2 Gallon, 100 PSI Oilless

2 Gallon, 100 PSI Oilless 2 Gallon, 100 PSI Oilless Air Compressor Model 47407 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

G10K - 1/2" Heavy-Duty Air Impact Wrench

G10K - 1/2 Heavy-Duty Air Impact Wrench G10K - 1/2" Heavy-Duty Air Impact Wrench OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save Save This This Manual Manual Keep manual for the safety warnings and precautions, assembly, Keep manual for the safety warnings and precautions, assembly, operating,

More information

Paint spray gun/hose kit

Paint spray gun/hose kit Paint spray gun/hose kit Model 96367 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from

More information

Oil-less air compressor

Oil-less air compressor Oil-less air compressor 99780 99781 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL

HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL HEAVY-DUTY AIR RATCHET WRENCH OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in

More information

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL

ATD LB PRESSURE BLASTER INSTRUCTION MANUAL ATD-8402 90LB PRESSURE BLASTER INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS SAFETY INSTRUCTIONS FOR SANDBLASTER 1. Before opening the tank release the air pressure on the sand tank. To do this, turn off

More information

TRANSMISSION FLUID EXCHANGER

TRANSMISSION FLUID EXCHANGER TRANSMISSION FLUID EXCHANGER Model 93019 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in

More information

foldable/adjustable sawhorse

foldable/adjustable sawhorse foldable/adjustable sawhorse Model 96506 Set up And Operating Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

40 LB. CAPACITY SANDBLAST CABINET. Models: /13

40 LB. CAPACITY SANDBLAST CABINET. Models: /13 40 LB. CAPACITY SANDBLAST CABINET Models: 7488 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other

More information

Model Visit our website at:

Model Visit our website at: 6 DIAL Fractional CALIPER Model 92437 Set up And Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

Read this material before using this product. Failure to do so can result in serious injury.

Read this material before using this product. Failure to do so can result in serious injury. Oilless COMPRESSOR 90168 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

TEM# Air Hammer Combo USER'S MANUAL

TEM# Air Hammer Combo USER'S MANUAL Air Tools TEM# 40 Air Hammer Combo USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions

More information

1/2 in. AIR IMPACT WRENCH (TWIN HAMMER)

1/2 in. AIR IMPACT WRENCH (TWIN HAMMER) 1/2 in. AIR IMPACT WRENCH (TWIN HAMMER) WARNING Read Operator s Manual. Do not operate equipment until you have read this Operator s Manual for Safety, Assembly/Operation and Maintenance Instructions.

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

OILLESS AIR COMPRESSOR 135 PSI

OILLESS AIR COMPRESSOR 135 PSI OILLESS AIR COMPRESSOR 135 PSI Model 96087 Assembly And Operation Instructions Please note: Air Hose sold separately. Due to continuing improvements, actual product may differ slightly from the product

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 1-1/4 INCH BRAD NAILER Model: 7611 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

20 Ton Air Over Hydraulic Jack

20 Ton Air Over Hydraulic Jack 20 Ton Air Over Hydraulic Jack Model 95553 Assembly And Operation Instructions Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly

More information

Model OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein.

Model OPERATING INSTRUCTIONS. Due to continuing improvements, actual product may differ slightly from the product described herein. 2 GALLON 1.5 HP AIR COMPRESSOR Model 94724 OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission Oaks Blvd., Camarillo,

More information

20 GAUGE WIDE CROWN AIR STAPLER

20 GAUGE WIDE CROWN AIR STAPLER 20 GAUGE WIDE CROWN AIR STAPLER Model 68029 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could

More information

23 GAUGE AIR PIN NAILER

23 GAUGE AIR PIN NAILER 23 GAUGE AIR PIN NAILER Model 68022 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could result

More information

21 ANGLE FRAMING NAILER SET UP AND OPERATING INSTRUCTIONS. Visit our website at:

21 ANGLE FRAMING NAILER SET UP AND OPERATING INSTRUCTIONS. Visit our website at: 21 ANGLE FRAMING NAILER 98733 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious injury.

More information

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS

accidents which arise due to non-observance of these instructions and the safety information herein. SPECIFICATIONS 18 GAUGE 2 INCH BRAD NAILER Model: 7555 CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry.

More information

1/4 Air Ratchet Wrench

1/4 Air Ratchet Wrench /4 Air Ratchet Wrench 92849 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 2005 by Harbor Freight Tools. All

More information

3 AiR CUT-OFF TOOL With LASER

3 AiR CUT-OFF TOOL With LASER 3 AiR CUT-OFF TOOL With LASER 65065 Set up and Operating Instructions Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to do so can result in serious

More information

AIR/OVER HYDRAULIC JACK 20 TON

AIR/OVER HYDRAULIC JACK 20 TON AIR/OVER HYDRAULIC JACK 0 TON 4487 ASSEMBLY AND OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com Copyright 999 by Harbor Freight Tools.

More information

1/4 SHEET PALM SANDER

1/4 SHEET PALM SANDER 1/4 SHEET PALM SANDER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

3/8" Dr. Air Butterfly Impact Wrench

3/8 Dr. Air Butterfly Impact Wrench 8192106 3/8" Dr. Air Butterfly Impact Wrench Owner s Manual Read and understand all instructions before use. Retain this manual for future reference. Specifications Construction: Polished aluminum and

More information

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095

10 DRIP NOZZLE WATERING DRIP KIT Model / Model 46095 10 DRIP NOZZLE WATERING DRIP KIT Model 93261 / Model ASSEMBLY AND OPERATING INSTRUCTIONS Due to continuing improvements, actual product may differ slightly from the product described herein. 3491 Mission

More information

21 Gallon. Model Visit our website at:

21 Gallon. Model Visit our website at: 21 Gallon Cast Iron VERTICAL Oil-lubricated AIR COMPRESSOR Model 94667 OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read this material before using this product. Failure to

More information

ORBITAL AIR SANDER. Owner s Manual

ORBITAL AIR SANDER. Owner s Manual ORBITAL AIR SANDER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

15 GAUGE AIR FINISH NAILER

15 GAUGE AIR FINISH NAILER MAGNESIUM 15 GAUGE AIR FINISH NAILER Models 94440 SET UP AND OPERATING INSTRUCTIONS Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

Owner s Manual & Safety Instructions

Owner s Manual & Safety Instructions Owner s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product s

More information

1/2 DRIVE AIR IMPACT WRENCH STUBBY

1/2 DRIVE AIR IMPACT WRENCH STUBBY 1/2 DRIVE AIR IMPACT WRENCH STUBBY COMPACT AND LIGHT WEIGHT ONLY 610NM LONG TORQUE 122MM K13203 ED1 Sept 15 MAX LOW AIR CONSUMPTION TWIN HAMMER MECHANISM Table of Contents Know Your Product...1 General

More information

HEAVY DUTY HOT KNIFE

HEAVY DUTY HOT KNIFE HEAVY DUTY HOT KNIFE 66182 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury.

AIR COMPRESSOR. Failure to follow all instructions as listed below may result in electrical shock, fire, and/or serious personal injury. 2 GALLON AIR COMPRESSOR Model: 7517 DO NOT RETURN TO STORE. Please CALL 800-348-5004 for parts and service. CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials

More information

INDUSTRIAL COMPOSITE 3/8 DRILL REVERSIBLE

INDUSTRIAL COMPOSITE 3/8 DRILL REVERSIBLE INDUSTRIAL COMPOSITE 3/8 DRILL REVERSIBLE 2 YEAR WARRANTY KEYLESS CHUCK FORWARD & REVERSE ERGONOMIC RUBBER GRIP K13260 ED1 December 15 Table of Contents Know Your Product...1 General Safety Instructions...2

More information

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL

MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL MODEL H8214 AIR BODY SAW INSTRUCTION MANUAL COPYRIGHT SEPTEMBER, 2007 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL

More information

AIR HYDRAULIC RIVETER

AIR HYDRAULIC RIVETER AIR HYDRAULIC RIVETER Owner s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions

More information

1000 Lb. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011

1000 Lb. Distributed exclusively by Harbor Freight Tools Mission Oaks Blvd., Camarillo, CA 93011 1000 Lb. Electric Motorcycle Lift 66247 Set up And Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

PORTABLE 5 GALLON AIR TANK ASSEMBLY & OPERATING INSTRUCTIONS

PORTABLE 5 GALLON AIR TANK ASSEMBLY & OPERATING INSTRUCTIONS PORTABLE 5 GALLON AIR TANK MODEL 472 ASSEMBLY & OPERATING INSTRUCTIONS 349 Mission Oaks Blvd., Camarillo, CA 930 Visit our Web site at http://www.harborfreight.com TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

More information

INDUSTRIAL AIR DIE GRINDER STRAIGHT

INDUSTRIAL AIR DIE GRINDER STRAIGHT INDUSTRIAL AIR DIE GRINDER STRAIGHT 2 YEAR WARRANTY LOW AIR CONSUMPTION ADJUSTABLE SPEED REGULATOR UNIQUE TWIN BEARING SYSTEM K13230 ED1 December 15 Table of Contents INDUSTRIAL AIR DIE GRINDER STRAIGHT

More information

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons

SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons SPECIFICATIONS TABLE Maximum Air Pressure 115 PSI Air Tank Capacity 20 Gallons Air Flow Capacity 6.2 CFM at 40 PSI 5.2 CFM at 90 PSI Motor 2.5 HP Working / 4 HP Peak 120 Volt / 60 Hz / 13 A / 1-Phase Required

More information