The Facts about Water Tank Diving Evaluations. Jennifer Coon, CSP, CHMM, CET Safety Director Tank Industry Consultants
|
|
|
- Edwin Fowler
- 6 years ago
- Views:
Transcription
1 The Facts about Water Tank Diving Evaluations Jennifer Coon, CSP, CHMM, CET Safety Director
2 2 OSHA Regulation
3 Contributing Factors 3 Diver Fatalities to 2013 Ranked in Order of Frequency 1. Insufficient Number of Dive Team Members 2008 to Diver Fatalities 24 Due to Insufficient Number of Dive Team Members 2. Physical Condition of Diver Office of Maritime Enforcement Steve Butler February 2014
4 Contributing Factors 4 Diver Fatalities to 2013 Ranked in Order of Frequency 3. Equipment Malfunction Leading Cause of Malfunction Improper Maintenance 4. Training Deficiencies Failure to Recognize and Avoid Underwater Hazards Poor Response when Hazards Encountered 5. Differential Pressure Office of Maritime Enforcement Steve Butler February 2014
5 Contributing Factors Diver Fatalities to 2013 Ranked in Order of Frequency 5 6. Entanglement 7. Entrapment 8. Explosion 9. AGE (arterial gas embolism) / Decompression Sickness Office of Maritime Enforcement Steve Butler February 2014
6 Qualifications What to Ask 6 Divers qualified to perform water tank and coating evaluations Divers properly certified Divers training records Copies of Company and Personal Dive Logs Divers retain current CPR/1 st Aid/O2 administration training Divers have current Accident Management Training Examples of previous site-specific dive plans available
7 Qualifications Know Water Tanks? 7
8 Selecting a Storage Tank Engineer/Inspector 8 AWWA M42 Registered Professional Engineer with extensive experience in water storage tank engineering and inspection experienced personnel
9 Selecting a Storage Tank 9 Engineer/Inspector Extensive knowledge of industry standards traditional engineering disciplines specialized training tank construction practices surface cleaning and cleanliness standards
10 Selecting a Storage Tank 10 Engineer/Inspector Effective communications skills to interpret specifications resolve potential issues Climbing abilities and knowledge of proper rigging safety practices respect for heights
11 11 Ask Prospective Consultants Number of Years Inspecting Tanks Registered Professional Engineer on Staff? Water Industry Involvement Number of Tanks Inspected Annually
12 12 OSHA Requires Verification of Competency
13 Qualifications Diver Properly Certified? 13
14 Qualifications Company and Personal Training Records 14
15 Qualifications Company & Personal Dive Logs 15
16 Dive Logs 16 Should be 2 types COMPANY and PERSONAL Must be current List at least last 12 months of dive activity Ensure dive experience is real Verify that personnel are not subject to unsafe dive practices
17 Qualifications Accident Management Training 17 Divers Alert Network
18 Qualifications CPR/1 st -Aid/O2 18
19 Qualifications Dive Plans 19
20 Site-Specific Dive Plan 20 Anticipated High-Risk Activities Crew Roles and Responsibilities Required Equipment Emergency Planning Locations of Nearest Hospitals and Monoplace Hyperbaric Chambers Safety Data Sheets (SDS) Address other safety hazards
21 High-Risk Activities 21
22 Crew Roles and Responsibilities 22
23 Team Size 23
24 Dive Team Size 24 Minimum of 4 Certified Commercial Divers Enough Equipment On Site to Suit Up 3 Divers 2 Divers in Water 2 Tenders Dive Supervisor or Designated Person in Charge
25 Required Equipment 25
26 Equipment Check List 26 Two-Way Communication Radios w/ Tether Line Buoyancy Compensators (BCD) Personal Fall Arrest Equipment Full Face Masks Dry Suits Main Air Tanks, Emergency Air Tanks, BCD Air Tanks Dive Tables Weights Bag-Type Manual Resuscitate w/ Mask and Tubing Emergency O2 Tank Tarps Raft Disinfectant Safety Goggles Chemical Gloves
27 Emergency Planning 27
28 Nearest Hospital and Monoplace Hyperbaric Chamber 28
29 Safety Data Sheet (SDS) 29
30 Additional Hazards to Address in Dive Plan 30 Permit-Required Confined Space Lockout-Tagout Disinfection Ladders Walking/Working Surfaces Physical Hazards
31 Permit-Required Confined Space 31 Written program Employee training Designated crew roles/responsibilities Emergency response Permits Continuous air monitoring
32 Logout/Tagout 32
33 Logout/Tagout 33
34 Disinfection 34 Applicable standards: AWWA C652 OSHA Hazard Communication 29 CFR
35 Disinfection 35
36 Disinfection 36
37 Exterior Ladders 37
38 Condition of Interior Ladders 38
39 Working at Heights 39
40 Physical Hazards 40 Illumination Heat Stress Cold Stress Material Hoisting and Lifting Procedure Handling Air Cylinders
41 Decompression/Time and Air 41
42 Over 100 Ft of Water Depth 42 Decompression Chamber On-Site
43 What to Know Prior to Hire 43 Are divers qualified to perform water tank and coating evaluations? Are divers properly certified? Verify divers training records. Review copies of Company and Personal Dive Logs. Do divers have current CPR/1 st Aid/O2 administration training? Do divers have current Accident Management Training? Review examples of previous site-specific dive plans available.
44 44 Facilitating a Safer Dive Provide Keys to All of the Roof Manholes Keep Water Levels High Isolate the Tank Early Let Inspectors Know if the Tank Has an Interior Ladder
45 Dive Safety Checklist 45 OSHA Up-to-Date Company & Diver Dive Logs CPR/First-Aid & Oxygen Administration Training 4-Member Dive Team Comply with OSHA Hazard Communication Requirements Lockout & Tag All Valves Previous Dive Plans Commercial Diver Certification Sufficient Equipment to Suit-Up 3 Divers Comply with OSHA Confined Space Compliance with New OSHA Subpart D Walking Surfaces (effective January 17, 2017)
46 Additional Recommendations 46 Extensive Experience in Water Tank Engineering & Inspection Diver is Employee of Registered Professional Engineer Tank Isolated System while Diver in Tank Potential for 5-Member Dive Team
47 47 Critical Components of Safe Water Tank Dive Inspection Crew Size Minimum of 4 Certified Divers Prior to Mobilization - Site-Specific Emergency Plan Lock-Out/Tag-Out Procedure & Verification Qualifications & Tank Expertise
48 48 Dive Evaluation Sample RFQ Available
49 Questions? 49
LOCKOUT-TAGOUT PROGRAM
LOCKOUT-TAGOUT PROGRAM Please Note: This material, or any other material used to inform employers/employees of compliance requirements of OSHA standards through simplification of the regulations should
The Johns Hopkins University/The Johns Hopkins Hospital Health, Safety and Environment Manual Safety Policies:
Page 1 of 6 Keywords: Airborne Combustible, Atmospheric Monitoring, Atmospheric Oxygen, Authorized Entrant, Body Harness, Combustible Gas Meter, Communication Procedure, Confined Space, CPR, Entry, Entry
Department of the Interior Departmental Manual
Department of the Interior Departmental Manual Effective Date: 3/12/99 Series: Safety Management Part 485: Safety and Occupational Health Program Chapter 27: Underwater Diving Safety Originating Office:
POTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.09.1 Revision Date: 2011.06 Confined Space 1. PURPOSE 2. SCOPE 1.1. To properly designate Confined Spaces (CS) at Thompson Rivers University (TRU), to provide guidance to ensure the safety
7. TDI Advanced Wreck Diver Course
7. TDI Advanced Wreck Diver Course 7.1 Introduction This course provides training and experience to competently conduct advanced wreck dives. This program includes penetration skills and techniques. Depths
Lockout/Tagout Program
Lockout/Tagout Program Control of Hazardous Energy Subpart J - 29 CFR 1910.147 29 CFR 1926.417 OSHA Standard All industries must comply Estimated to prevent Approximately 120 fatalities per year 28,000
9. Extended Range Instructor
9. Extended Range Instructor 9.1 Introduction This course provides the training and experience required to be certified to competently teach air dives to 55 metres / 180 feet that require staged decompression,
Common Discrepancies Uncovered on ADCI Diving Contractor & Training Program Audits
Common Discrepancies Uncovered on ADCI Diving Contractor & Training Program Audits Ways to Set Your Company or School Up For Success on ADCI Audits and Reduce Costs In most instances, all discrepancies
SAFETY POLICY AND PROCEDURE MANUAL All Euramax Subsidiaries. Number K-3.0 Welding Safety Procedures
Number K-3.0 Issued: 1/2009 Revised: 3/2016 Page 1 of 3 1.0 PURPOSE: To standardize procedures associated with production and maintenance welding and to minimize the potential risk of accident or injury
NOAA DIVING PROGRAM MINIMUM STANDARD FOR DECOMPRESSION DIVING USING OPEN-CIRCUIT SCUBA EQUIPMENT
NOAA DIVING PROGRAM MINIMUM STANDARD FOR DECOMPRESSION DIVING USING OPEN-CIRCUIT SCUBA EQUIPMENT NOAA Diving Center 7600 Sand Point Way, N.E. Seattle, WA 98115-0070 NOAA DIVING PROGRAM MINIMUM STANDARD
CONFINED SPACE PROGRAM
CONFINED SPACE PROGRAM I. Purpose This Confined Space Program has been developed in accordance with the Occupational Safety and Health Administration (OSHA) regulations 29 CFR 1910.146. The purpose of
Water Tank Inspection Standards & Guidelines
Water Tank Inspection Standards & Guidelines Penni Snodgrass Sales and Marketing Manager American Water Works Association (AWWA) National Fire Protection Association (NFPA) AWWA D101-53 (retired) Inspecting
Control of Hazardous Energy Lockout / Tagout Program
Control of Hazardous Energy Lockout / Tagout Program August 2016 Table of Contents Purpose... 1 Scope and Application... 1 Responsibilities... 1 Environmental Health and Safety Personnel (EH&S)... 1 Directors
CONFINED SPACE ENTRY PROGRAM
INTRODUCTION Purpose: OSHA promulgated the provisions of 29 CFR 1910.272 intending that compliance with the regulations would reduce the number of explosions, fires and illness and/or injury caused safety
Confined Space in Construction
Confined Space in Construction 1926.1201 1926.1213 Confined space means a space that: 1. Is large enough and so configured that an employee can bodily enter it; 2. Has limited or restricted means for entry
SAFETY AND HEALTH STANDARD CONFINED SPACE ENTRY REQUIREMENTS Effective Date: 06/10/10 Standard: 16.2 Document Number: KUCSH0038 Rev: 07
16.2.1 INTRODUCTION 16.2.1.1 The purpose of this standard is to establish safety requirements, which include a permit system, for entry into confined spaces. 16.2.2 DEFINITIONS 16.6.2.1 Confined space
Energy Control Procedures Lockout/Tagout 29 CFR
Energy Control Procedures Lockout/Tagout 29 CFR 1910.147 Paul Schlumper, PE, CSP Georgia Tech Research Institute What is covered? Servicing and maintenance Normal production operations where: Employees
CONTROL OF HAZARDOUS ENERGY IN THE WORKPLACE
Office of Environmental Health & Safety CONTROL OF HAZARDOUS ENERGY IN THE WORKPLACE LOCK OUT/TAG OUT OSHA 29 CFR 1910.147 rev. 3 2014 Director of Environmental Health & Safety Control of Hazardous Energy
QUALIFICATIONS OF GRADUATES
NAUI Public Safety Diver OVERVIEW This is a continuing education certification course for Certified SCUBA Divers who desire knowledge and training in Public Safety Diving. This course emphasizes safety,
State University of New York College at Oneonta
State University of New York College at Oneonta CONFINED SPACE ENTRY POLICY - PROCEDURE REVIEWED 05/11/17 CONFINED SPACE ENTRY - WRITTEN PLAN POLICY The State University College at Oneonta is committed
CONFINED SPACE PROGRAM
CONFINED SPACE PROGRAM A confined space, as defined in 29 CFR 1910.146: Is large enough and so configured that an employee can bodily enter and perform assigned work AND Has limited or restricted means
9. Extended Range Diver
9. Extended Range Diver 9.1 Introduction This course provides training and experience required to competently utilize air for dives up to 55 metres / 180 feet that requires staged decompression, utilizing
LOCKOUT/TAGOUT PROGRAM
LOCKOUT/TAGOUT PROGRAM HOW CLIMATE ENGINEERS INC. COMPLIES WITH THELO/TO STANDARD It is the intent of Climate Engineers Inc. to comply with OSHA s Control of Hazardous Energy Standard (1910.147). The following
Safe Work Practices / Procedures / Instruction CONFINED SPACE
CONFINED SPACE Entry into and work in a confined space poses health and safety problems which may include: Presence or possible build up of a hazardous atmosphere Unexpected movement of equipment or materials
Safety Manual Section 6 Confined Space
6. CONFINED SPACE ENTRY Introduction The following sections provide general guidelines and procedures for confined space entry. This section covers the following topics: Topic Page 6.1 Types of s... 6-2
APPENDIX 4.A. Texas A&M University - Corpus Christi Dive Plan. Working. Model Air Job Status Trimix (% O2) (% He) Off-Duty w/univ. Equip.
APPENDIX 4.A Dive Plan Date Submitted Submitted By Date Approved Approved By General Dive Operations Proposed Date(s) of Dive Operations Location of Dive Operations Dive Platform Number of Dive Rotations/Day
10. TDI Advanced Trimix Instructor Course
10. TDI Advanced Trimix Instructor Course 10.1Introduction The TDI Advanced Trimix Instructor Course provides the training required to competently and safely teach breathing gases containing helium for
12. Trimix Instructor
12. Trimix Instructor 12.1 Introduction The TDI Trimix Instructor course provides the training required to competently and safely teach breathing gases containing helium with no less than 18 percent oxygen
Overview. Prerequisites for the course. What will be covered throughout the course - Modules - Assembly & Pre/Post Care - Diving Skills
Overview Prerequisites for the course What will be covered throughout the course - Modules - Assembly & Pre/Post Care - Diving Skills Requirements for Successful Completion Study Materials You Will Need
Hazardous Energy Control Lockout/Tagout
Hazardous Energy Control Lockout/Tagout Debbie Rauen INSafe Safety Consultant Outline Energy Sources Employer Responsibilities Authorized Employee Responsibilities Energy Control (LO/TO) Equipment & Devices
City of Montpelier, Vermont The Smallest Capital City in the United States CONFINED SPACES ENTRY PROGRAM
City of Montpelier, Vermont The Smallest Capital City in the United States CONFINED SPACES ENTRY PROGRAM Last Updated August 28, 2003 1 Permit Required Confined Spaces Entry Program TABLE OF CONTENTS Purpose...3
Elements of a Lockout/Tagout Program OSHA
September 15, 2015 Elements of a Lockout/Tagout Program OSHA 1910.147 Dayna Noble Industrial Safety Consultant Specialist Ohio BWC 567-204-8917 Dayna.noble@bwc.state.oh.us Top 10 most frequently cited
13. Advanced Trimix Diver
13. Advanced Trimix Diver 13.1 Introduction The TDI Advanced Trimix course provides the training required to competently and safely utilize breathing gases containing helium for dives that require staged
SAFETY IN COMMERCIAL DIVING PRACTICES: A COMPARISON OF THREE (3), FOUR (4), AND FIVE (5) MAN DIVE TEAMS
SAFETY IN COMMERCIAL DIVING PRACTICES: A COMPARISON OF THREE (3), FOUR (4), AND FIVE (5) MAN DIVE TEAMS Unfortunately, commercial dive companies in the United States frequently circumvent industry safe
University of Arkansas Office of Environmental Health and Safety
University of Arkansas Office of Environmental Health and Safety Procedure Name: Lockout / Tagout Procedure Number: 600.26 Effective Date: 12-1-2015 Procedure: Developed in accordance with the OSHA Control
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions
Reporting, Recording & more Walking Working Surfaces Local Emphasis Program Your Questions As of January 1, 2015, employers must report the following to OSHA: All work-related fatalities within 8 hours
Hazardous Energy Control
Lockout Tagout This program has been prepared to provide assistance in compliance with USA OSHA standards and/or Best Management Practices. It should not be used without consideration of the unique conditions
Lock Out/Tag Out Control of Hazardous Energy
Lock Out/Tag Out Control of Hazardous Energy University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells 1.0 Program Objective UF
1. Unlimited, so long as adequate facility, supplies and time are provided to ensure comprehensive and complete training of subject matter
12. Trimix Diver 12.1 Introduction The TDI Trimix course provides the training required to competently and safely utilize breathing gases containing helium for dives that require staged decompression,
University System of Maryland (USM) Dive Plan Approval Form To be submitted to the USM Scientific Diving Safety Officer
University System of Maryland (USM) Dive Plan Approval Form To be submitted to the USM Scientific Diving Safety Officer Date Submitted: Proposed Expedition Dates: Dive Plan through Dive Platform Name:
LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM
LOCK-OUT/TAG-OUT (LO/TO) SAFETY PROGRAM REGULATORY STANDARD: OSHA - 29 CFR 1910.147 BASIS: Approximately three million workers in the United States face risks from uncontrolled energy when servicing machinery
LOCKOUT / TAGOUT PROGRAM
LOCKOUT / TAGOUT PROGRAM Developed in accordance with the OSHA Control of Hazardous Energy Standard, 29 CFR 1910.147 DECEMBER 7, 2017 SKIDMORE COLLEGE 815 NORTH BROADWAY, SARATOGA SPRINGS, NY 12866 Table
THE UNIVERSITY OF NORTH CAROLINA
THE UNIVERSITY OF NORTH CAROLINA AT CHAPEL HILL CHILLED WATER DEPARTMENT ENERGY CONTROL PROCEDURE The purpose of this document is to establish minimum requirements for the manual isolation and securing
Lockout/Energy Control
Lockout/Energy Control Presented By: Sotaris, LLP 2000 Auburn Drive, Suite 200 Beachwood, Ohio 44122 P: 216-378-7650 F: 866-794-5756 W: www.sotaris.com E: awj@sotaris.com 1 About Me Andrew W. Johnson,
Electrical Safety Work Practices
Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially
DIVING SAFETY MANUAL FOR OPEN WATER DIVING May 2015
DIVING SAFETY MANUAL FOR OPEN WATER DIVING May 2015 The University of Victoria Occupational Health and Safety Office P.O. Box 1700 STN CSC Victoria, BC, Canada V8W 2Y2 Published September 1989 First Revision
University of Illinois at Chicago. Control of Hazardous Energy Program (Lockout/Tagout)
University of Illinois at Chicago Control of Hazardous Energy Program (Lockout/Tagout) 10/4/2018 UNIVERSITY OF ILLINOIS AT CHICAGO Control of Hazardous Energy (Lockout/Tagout) Program TABLE OF CONTENTS
QUALIFICATIONS OF GRADUATES
NAUI Forensic Diver Course 828-329-9911 scubanaui@gmail.com OVERVIEW This is a continuing education certification course directed towards Certified Scuba Divers with Advanced Training who desire greater
ANNUAL IDOL COMPLIANCE TRAINING
ANNUAL IDOL COMPLIANCE TRAINING Lock Out / Tag Out Refresher SUGAR GROVE FIRE DEPARTMENT 1 TRAINING DIVISION Instructions To complete this independent study program, view the entire program, advancing
Confined Space Entry Program Guidelines (Human Resources - Health and Safety Department)
Confined Space Entry Program Guidelines (Human Resources - Health and Safety Department) Introduction The Thames Valley District School Board, through the Health and Safety Policy is committed to providing
General Job Responsibilities and Duties. Greater Cleveland Aquarium. Reports to: Diving Safety Coordinator
Reports to: Diving Safety Coordinator General Summary of Job Duties The assists in the planning, development, training and implementation of all SCUBA activities for the including but not limited to care
GOM Diving Safety Work Group. Recommended Minimum Dive Team Manning 3/18/2016
GOM Diving Safety Work Group COMMITTEE WORK GROUP Recommended Minimum Dive Team Manning 3/8/206 DISCLAIMER This US GOM DSWG document is not meant to be all inclusive, and not every rule and regulation
Safe Work Practices and Permit-to-Work System
CHAPTER 24 Safe Work Practices and Permit-to-Work System 24.1 INTRODUCTION OSHA s Process Safety Management (PSM) Standard (OSHA, 1992) requires employers to develop and implement safe work practices (SWPs)
CONTROL OF HAZARDOUS ENERGY (LOCKOUT/TAGOUT) PROGRAM
Page: 1 of 15 1.0 Purpose and Applicability 2.0 Scope 1.1 It is the policy of the University of Pennsylvania in coordination with the Office of Environmental Health and Radiation Safety to provide the
Management Plan for Confined Spaces
IEA, INC. W A S ECA P U B L I C S C H O O L S I S D # 829 Contact Us: BROOKLYN PARK OFFICE 9201 W. BROADWAY, #600 BROOKLYN PARK, MN 55445 763-315-7900 MANKATO OFFICE 610 N. RIVERFRONT DRIVE MANKATO, MN
A. Evaluation of the written program
A. Evaluation of the written program Begin your audit with an evaluation of the written respiratory protection program. In addition to the operating procedures describing respirator selection and use in
Sample Lockout/Tagout Policy
Risk Solutions Sample Lockout/Tagout Policy Purpose The purpose of this program is to protect employees from injuries due to the potential release of hazardous energy while servicing and maintaining equipment
TDI Standards and Procedures. Part 2: TDI Diver Standards
22. DPV Cave Diver 22.1 Introduction This course is designed to teach trained cave divers how to utilize Diver Propulsion Vehicles (DPVs) in the cave environment. Divers will learn about safe DPV use,
Control of Hazardous Energy. Environmental Health and Safety
Control of Hazardous Energy Environmental Health and Safety 11/01/2014 1 CONTROL OF HAZARDOUS ENERGY (LOCKOUT-TAGOUT) OSHA CFR 1910.147 Revised Date: November 2014 STATEMENT OF POLICY Ball State University
Preventive Maintenance
A Health and Safety Guideline for Your Workplace Why? Preventive maintenance is predetermined work performed to a schedule with the aim of preventing the wear and tear or sudden failure of equipment components.
Confined Space Policy
Confined Space Policy Introduction Employees of Lawrence University may at times be required to enter into and perform work inside tanks, chests, sewers, vessels and other confined spaces. Due to the potentially
1 Purpose. 2 Responsibilities. 3 Policy Content ENVIRONMENTAL, HEALTH AND SAFETY STANDARDS. TITLE: CONFINED SPACE ENTRY Document Number: *
(Insert Company Logo) CORPORATE SAFETY MANUAL ENVIRONMENTAL, HEALTH AND SAFETY STANDARDS TITLE: CONFINED SPACE ENTRY Document Number: * Issue Date: Revision Date: * 1 Purpose The purpose of this policy
RISK ENGINEERING TECHNICAL GUIDE
Introduction Many workspaces contain spaces that are considered to be "confined", because their configurations hinders the activities of any employee who must enter into, work in, and exit from them. In
Confined Space Program
Type: POLICY Revision: 01 Owner: BRL Document Name: HSPOL 011 Status: Current Nov 2014 Review Date: September 2017 Effective Date: 01 January 2015 Total Pages: 6 Definitions: New Old Confined space means
Confined Space 29 CFR !
Sample Written Program For Your Company For Confined Space 29 CFR 1910.146 Provided By: P.O. Box 2136 Slidell, LA 70458 Phone: 985-781-1444 Fax: 985-718-4957 Email: info@se-safety.com 29 CFR 1910.146 Confined
SUBJECT: SAFE WORK PRACTICES CHECKLIST FOR LOW VOLTAGE ELECTRICIANS REVISION September 15, Area Checklist Items 2600SEG131 Check ( or NA)
HUMN RESOURCES DEPRTMENT SFETY ND INDUSTRIL HYGIENE UNIT FOR USE WITH SFE WORK PRCTICES FOR LOW VOLTGE ELECTRICINS STNDRD 2600SEG131 ND NNEX SFE WORK PRCTICES CHECKLIST FOR LOW VOLTGE ELECTRICINS 1 OF
The Control of Hazardous Energy (Lockout/Tagout) California State University Chico
The Control of Hazardous Energy (Lockout/Tagout) California State University Chico Department of Environmental Health and Safety Reviewed July 2008 TABLE OF CONTENTS Section Page 1.0 INTRODUCTION... 1-1
The Proper Procedure
The Proper Procedure Lockout Lockout is used to prevent the release of hazardous energy or equipment from starting by applying a lockout device and lock A padlock is placed on the appropriate energy isolating
CONTROL OF HAZARDOUS ENERGY LOCKOUT/TAGOUT PROGRAM
CONTROL OF HAZARDOUS ENERGY LOCKOUT/TAGOUT PROGRAM 1.0 REGULATORY AUTHORITY Code of Federal Regulations, 29 CFR 1910.147; California Code of Regulations, Title 8, Sections 2320.1 and 3314; CSU, Fullerton
Control of Hazardous Energy Program (Lockout/Tagout)
Control of Hazardous Energy Program (Lockout/Tagout) 1 The Control of Hazardous Energy (Lockout/Tagout) Program 1910.147 The following lockout/tagout program is provided to assist employees in complying
1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
SCUBA DIVING SAFETY MANUAL
SCUBA DIVING SAFETY MANUAL Revised: 11 July 2017 TABLE OF CONTENTS Preamble... 3 Disclaimer... 3 Abbreviations... 3 Definitions... 3 General Requirements... 4 Additions... 4 CAUS 3.1 Organization Requirements....
DUQUESNE UNIVERSITY PERSONAL PROTECTIVE EQUIPMENT (PPE) PROGRAM
DUQUESNE UNIVERSITY PERSONAL PROTECTIVE EQUIPMENT (PPE) PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Hazard Assessment 2 Selection Guidelines
PRINTED COPY IS NOT CONTROLLED Page 1 of 22
The current (electronic) copy of this procedure is found at: Z:/ISDC Procedures and Forms/Current/ (Revision History/Approvals is on last page) 1. PURPOSE The following guidelines are intended to help
8. TDI Trimix Diver Course
8. TDI Trimix Diver Course 8.1 Introduction The TDI Trimix Course provides the training required to competently and safely utilize breathing gases containing helium for dives that require staged decompression,
Newport News Shipbuilding Contractor Environmental, Health and Safety Resource Manual Sewage
Newport News Shipbuilding Contractor Environmental, Health and Safety Resource Manual Sewage Newport News Shipbuilding Page 1 SEWAGE 1. Hazard, Reference and Requirements a. Sewage is a potential hazard
Confined Space Program
806 Island Ford Road McGaheysville, VA 22840 www.cavehilcorp.com Phone: 800-522-4980 Phone: 540-289-5051 Fax: 540-289-7592 Confined Space Program Internal & External Confined Space Safety Information CHC
Centre of Excellence for Subsea Safety
Centre of Excellence for Subsea Safety Departments nhc training nhc testing nhc consulting nhc emergency Medical Equipment Hyperbaric Welding 07 09 13 15 17 11 Welcome to nhc National Hyperbaric Centre
CONFINED SPACE PROGRAM
CONFINED SPACE PROGRAM March 2017 CONTENTS Section 1: Introduction... 1 Section 2: Purpose... 1 Section 3: Definitions... 2 Section 4: Roles and Responsibilities... 4 Section 5: Testing and Monitoring...
ARKANSAS TECH UNIVERSITY FACILITIES MANAGEMENT HEALTH AND SAFETY MANUAL (LOCKOUT/TAGOUT) 30.0
() 30.0 The purpose of the Energy Control Policy (Lockout/Tagout) is to ensure that before any employee performs any servicing and/or maintenance on machinery or equipment, where the unexpected energizing,
Any active ERDI Emergency Response Diver Instructor may teach this course
11. Tender Ops 11.1 Introduction This course is designed to introduce the public safety professional to the ERDI Tender skills necessary to participate in public safety diving operations in a non-diving
SAMPLE WRITTEN PROGRAM for Control of Hazardous Energy LOCKOUT TAGOUT
SAMPLE WRITTEN PROGRAM for Control of Hazardous Energy LOCKOUT TAGOUT SAMPLE WRITTEN PROGRAM The objective of this procedure is to establish a means of positive control to prevent the accidental starting
OKLAHOMA CITY COMMUNITY COLLEGE CONTROL OF HAZARDOUS ENERGY PROGRAM. Environmental Health and Safety. Established:
OKLAHOMA CITY COMMUNITY COLLEGE CONTROL OF HAZARDOUS ENERGY PROGRAM Environmental Health and Safety Established: Developed in accordance with OSHA Standard 29 CFR 1910.147 1 1.0 SCOPE. Oklahoma City Community
RESPIRATORY PROTECTION PROGRAM
RESPIRATORY PROTECTION PROGRAM Compliant to 29 CFR 1910.134 NEW MEXICO STATE UNIVERSITY Las Cruces, New Mexico Environmental, Health & Safety (EH&S) 505-646-3327 http://safety.nmsu.edu NMSU Respiratory
Sample Written Program for The Control of Hazardous Energy (Lockout/Tagout)
USAG Bavaria Safety Office Sample Written Program for The Control of Hazardous Energy (Lockout/Tagout) Nov 2016 1910.147 The Control of Hazardous Energy (Lockout/Tagout) The following lockout/tagout program
Confined Space Entry Program 8 CCR 5157
TABLE OF CONTENTS 1. POLICY... 2 2. PURPOSE... 2 3. SCOPE... 2 4. DEFINITIONS... 2 5. CONFINED SPACES IN THE SACRAMENTO STATE... 4 6. PERMIT SPACE ENTRY - PERSONNEL RESPONSIBILITIES... 4 6.1. CONFINED
Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree Type
GENERAL INFORMATION Name: Diane King Phone #: 77021 Course Prefix/Number: ETI3704 Course Title: Industrial Safety in Electronics Engineering Technology Number of Credits: 3 B.A. B.S. B.A.S A.A. A.S. Degree
6. Each mitigation was verified and individually documented
CHESM/MSW Field Verification Instructions: All information in sections A, B and C must be completed. Information in section B related to subcontractors should be obtained from the work crew if possible.
DIVE PLAN SUBMITTAL FORM
DIVE PLAN SUBMITTAL FORM University of South Florida Diving Safety Program William Dent PED 214 Date Submitted: Proposed Expedition Dates: Dive Platform Name: (vessel, lab or shore) General Dive Site Location:
Confined Space Entry Program
Confined Space Entry Program August 2016 Table of Contents Purpose... 1 Scope and Application... 1 Responsibilities... 2 Environmental Health and Safety (EH&S)... 2 Entry Supervisor... 2 Attendant... 2
SECTION 30 DIVING OPERATIONS
SECTION 30 DIVING OPERATIONS 30.A GENERAL 30.A.01 All USACE diving operations, both government and contractor shall be performed in accordance with this manual. Failure to meet these requirements will
HAZARD COMMUNICATION Plan Globally Harmonized System
HAZARD COMMUNICATION Plan Globally Harmonized System GENERAL: In order to comply with 29 CFR 1910.1200, the following written Hazard Communication Program (HCP) is to be implemented for personnel of this
Tool Box Talk. Confined Space Entry New Construction Standard (2015)
Confined Space Entry New Construction Standard (2015) What s all this about Confined Space Entry and how does it affect the construction industry? On May 4, 2015 the Occupation Safety and Health Administration
DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM
DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Introduction 2 Regulatory Requirements 2 Protective Materials
An active ERDI Instructor that has been certified to teach this ops component
ERDI 4. Dry Suit Ops 4.1 Introduction The ERDI Dry Suit is designed to develop the knowledge and skills necessary for dry suit diving operations in emergency response diving. 4.2 Student Prerequisites
Original Date of Issue: 04/09
POLICIES AND PROCEDURES DEPARTMENT: Environmental Health and Safety SUBJECT: Electrical Safety Program Original Date of Issue: 04/09 Reviewed 12/2011 Revised 12/2011 BACKGROUND ELECTRIC SHOCK It is well
Clear up confusion between the requirements for confined spaces and grain storage structures.
1 Clear up confusion between the requirements for confined spaces and grain storage structures. Discuss safe methods of entry. Keep employees safe during entry! 2 3 4 Work to identify ways to eliminate
Permit-Required Confined Spaces...29CFR
(Compliance Audit) Section (c) General Requirements 1) Has the employer performed a workplace inspection to determine if there are Yes No NA permit-required confined spaces (PRCS) present? 2) If the workplace
Central Washington University
Central Washington University Lockout / Tagout (LOTO) Program Plan prepared by: Central Washington University Office of Environmental Health & Safety 400 East University Way Ellensburg, WA 98926 P: 509-963-2252
Team Blue Immersion. TecRec Overview. Technical Instructor Course
Team Blue Immersion TecRec 40-45-50 Overview Technical Instructor Course Contents DSAT Tec 40, 45 & 50 DSAT Tec 40, 45 & 50 Standards... 1 Discover Tec Prerequisites... 1 Tec 40 Prerequisites... 1 Tec