Ball Valves, Check Valves, and Swivels

Size: px
Start display at page:

Download "Ball Valves, Check Valves, and Swivels"

Transcription

1 Instructions -Parts List HIGH PRESSURE FLUI LINE Ball Valves, Check Valves, and Swivels 308ZAB EN Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 3 for a List of Models, including Maximum Working Pressures. Model 247 Model 2057 Model Model 2083 Model 233 Model Model 2425

2 Table of Contents List of Models... 2 Warnings... 5 Ball Valve Operation/Service... TwoWayValveParts... 7 OneWayValveParts... 7 Check Valve Parts... 7 Swivel Parts... 8 Graco Standard Warranty Graco Information

3 Two Way irector Valve List of Models Part No. Series Thread Size Seals 247 A /4 npt(mbe) fluoroelastomer One Way Ball Valves 7400 psi (5 MPa, 50 bar) Maximum Working Pressure Part No. Series Thread Size Seals A /4 npt(mbe) PTFE with PEEK seat A 3/8 npt(mbe) PTFE with PEEK seat A 3/8 npt(mbe) PTFE with PEEK seat 2458 A 3/8 npt(mbe) PTFE with PEEK seat A /4 npt(mbe) PTFE with PEEK seat A 3/8 npt(mbe) PTFE with PEEK seat One Way Ball Valves, Heavy uty Part No. Series Thread Size Seals B 3/8 npt(m) one end fluoroelastomer with Carbide seat 2374 A 3/8 npt(m) x /4 npt(m) fluoroelastomer with Carbide seat 2387 C 3/8 npt(m) x 3/8 npt(m) PTFE with PEEK seat A /4 npt(m) x /4 npt(m) fluoroelastomer with Carbide seat One Way Ball Valves Part No. Series Thread Size Seals 2057 B /4 npt(mbe) fluoroelastomer 2058 B 3/8 npt(mbe) fluoroelastomer 205 B 3/8 x /4 npt(mbe) fluoroelastomer B /4 npt(mbe) PTFE 280 A /4 nps(m) x 3/4 unf--2a PTFE 2235 A 3/8 x /4 npt(mbe) PTFE 2230 A 3/8 npt(mbe) PTFE A 3/8 npt(m) one end fluoroelastomer 2352 A 3/8 x /4 npt(mbe) PTFE, sst 2382 A 3/8 npt(mbe) fluoroelastomer A /4 npt(mbe) fluoroelastomer 2384 A 3/8 npt(mbe) PTFE, sst 2308 A /4 npt(mbe) PTFE, sst A 3/8 npt(mbe) PTFE, sst 2404 A /4 npt(mbe) PTFE, sst A /4 npt(mbe) PTFE, sst 24F07 A 3/8 npt(mbe) Flouroelastomer 308 3

4 List of Models Swivels 7400 psi (5 MPa, 50 bar) Maximum Working Pressure Part No. Series Thread Size Seals 2387 B /4 npsm(f) x /4 npsm(m) PTFE swivel Swivels Part No. Series Thread Size Seals /8 npt(f) x /4 npsm(f) swivel Leather /8 npt(f) x /2 npsm(f) swivel Leather Check Valves 3000 psi (2 MPa, 20 bar) Maximum Working Pressure Part No. Series Thread Size Seals /8 npt(m) x 3/8 npsm(f) Nitrile rubber swivel /8 npt(m) x 3/8 npsm(f) 0_ swivel Nitrile rubber /8 npt(mbe) Nitrile rubber Swivels 300 psi (25 MPa, 250 bar) Maximum Working Pressure Part No. Series Thread Size Seals /4 npt(m) x /4 npsm(f) Leather swivel B /4 npt(m) x /4 npsm(f) swivel PTFE 4 308

5 Symbols Warning Symbol WARNING This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions. Caution Symbol CAUTION This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions. INSTRUCTIONS WARNING EQUIPMENT MISUSE HAZAR Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. This equipment is for professional use only. Read all instruction manuals, tags, and labels before operating the equipment. Use the equipment only for its intended purpose. If you are not sure, call your Graco distributor. o not alter or modify this equipment. Check equipment daily. Repair or replace worn or damaged parts immediately. o not repair high pressure couplings; you must replace the entire hose. o not exceed the maximum working pressure of the lowest rated system component. Refer to the charts on pages 3 and 4 for the maximum working pressure of this equipment. Use fluids and solvents which are compatible with the equipment wetted parts. Refer to the Technical ata section of all equipment manuals. Read the fluid and solvent manufacturer s warnings. Comply with all applicable local, state, and national fire, electrical, and safety regulations. SKIN INJECTION HAZAR Spray from the gun, leaks or ruptured components can inject fluid into your body and cause extremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury. Fluid injected into the skin might look like just a cut, but it is a serious injury. Get immediate surgical treatment. Keep hands away from the end of the drain valve when opening it. o not stop or deflect leaks with your hand, body, glove or rag. Follow the Pressure Relief Procedure on page, before cleaning, checking or servicing the equipment. Tighten all fluid connections before operating the equipment. Fluid hoses must have spring guards on both ends, to help protect them from rupture caused by kinks or bends near the couplings

6 Ball Valve Operation/Service Pressure Relief Procedure WARNING SKIN INJECTION HAZAR The system pressure must be manually relieved to prevent the system from starting or spraying accidentally. Fluid under high pressure can be injected through the skin and cause serious injury. To reduce the risk of an injury from injection, splashing fluid, or moving parts, follow the Pressure Relief Procedure whenever you: areinstructedtorelievethepressure, stop dispensing, check or service any of the system equipment, or install or clean dispensing devices.. Engage the spray gun safety latch and any other equipment safety locks. 2. Turn off the power to the pump. 3. isengage the gun safety latch and trigger the spray gun to relieve pressure. 4. Engage the spray gun safety latch and slowly open the system drain valve(s). Keep hands away from the end of the drain valve when opening it. 5. Leave the drain valve(s) open until you are ready to use the system again. WARNING Two-way director valves must be used only as ON/OFF valves. Never use them to throttle fluid flow, as this causes rapid wear of the valve. A worn valve may leak or fail to stay in the position (operate/drain) that you set it, unexpectedly allowing high pressure fluid into the closed off part of the system. This hazard can result in fluid injection or splashing in the eyes or on the skin. If the valve leaks fluid into the closed off part of the system, or if the valve handle is loose or does not hold its position firmly, replace the valve immediately. Two-Way irector Valve Thetwo-waydirectorvalveisusedtodirecthigh pressure fluids in either of two directions. It is commonly used in heated circulating systems to bleed trapped air and to direct unused, heated fluids back to the pump. It can also be used in multiple gun installations. Connect the fluid line to the /4 in. npt(m) inlet (marked IN ). irect the fluid to either outlet by turning the lever in the direction desired for flow. One-Way Valves The one-way valves are used as drain valves to relieve fluid pressure in spray systems. To open the valve, turn the lever parallel to the valve housing. To fully stop fluid flow through the valve, turn the lever 0_ to the valve housing. Valve Service Follow the Pressure Relief Procedure at left. Remove the valve from the line and disassemble it. Clean the parts and inspect them for wear or damage. Replace them as necessary. CAUTION o not wash fluoroelastomer o-rings in ketone thinners as these thinners cause the o-rings to deteriorate. Lubricate the o-ring seals and threaded parts with lithium base lubricant. Assemble the valve in the reverse order of disassembly (refer to the parts drawing for your model). When installing the lever on the valve, make sure the hole in the ball is aligned with the direction of the lever. 308

7 Model 247 /4 npt(mbe), fluoroelastomer seals Two Way Valve Parts n LEVER, valve HOUSING, valve 3n 0230 NUT, hex; nylon cap; No n 024 SEAL, o-ring; fluoroelastomer standard SEAL, o-ring; PTFE optional 2 5n 0242 SEAL, o-ring; fluoroelastomer standard 0483 SEAL, o-ring; PTFE optional n 400 WASHER, flat, nylon 2 7n 7204 SEAT, ball, nylon STU, valve; /4 npt(m) 2 n 54 NUT, packing 0n STEM, valve n 7008 BALL, valve 8 n7 n4 n n n0 n n n 7n n Operating Mode To rain Line to Pump One Way Valve Parts rain Mode Operating Mode Line from Back Pressure Valve Model 2387, Series C 3/8 npt(m) x 3/8 npt(m), PTFE seals, PEEK seat 0230 NUT, hex; nylon cap; No { 0483 SEAL, o-ring; PTFE 3{ 0482 SEAL, o-ring; PTFE 2 4{ 400 WASHER, flat, nylon 2 5{ BALL, valve 7 54 NUT, packing STEM, valve LEVER, valve HOUSING, valve 2{ 07 SEAT, ball NIPPLE, 3/8 npt(m) WASHER, flat GRIP, handle { These parts are included in Repair Kit 24047, which may {4 8 {4 {2 5{ 3{ 2{ { 3{ 308 7

8 Model , Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure /4 npt(mbe); PTFE seals, PEEK seat One Way Valve Parts Model , Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat 2 Model 24580, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat Model 2458, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat Model , Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure /4 npt(mbe); PTFE seals, PEEK seat Model 24887, Series A 7400 psi (5 MPa, 50 bar) Maximum Working Pressure 3/8 npt(mbe), PTFE seals, PEEK seat, no lever n4 n0 n * Models and * 3* 5* 5* 3* LEVER, valve, (Models and ) 5A88 LEVER, valve, left hand (Model 24580, shown) 5A882 LEVER, valve, right hand LEVER, valve, (Model ) HOUSING, valve 3* 07 SEAT, ball, PEEK 2 4n 0230 NUT, hex; nylon cap; No (not on 24887) 5* 0482 SEAL, o-ring; PTFE 2 * 0483 SEAL, o-ring; PTFE 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 5274 STU, valve; /4 npt(m) Models and STU, valve; 3/8 npt(m) (Models , 24580, 2458 and 24887) 2 0n 54 NUT, packing n STEM, valve GRIP, handle (Models and only) n4 n0 n * Models and * 3* 5* * These parts are included in Repair Kit 2377, which may 5* 3*

9 One Way Valve Parts Model n n8 {*4 n {*0 {*3 7 {*4 {*2 3*{ 0*{ 5*{ 2 Model n0 n * 8* 3* 5* 5* 3* 2 308

10 Model 2382, Series A 3/8 npt(mbe), fluoroelastomer seals Model 23835, Series A /4 npt(mbe), fluoroelastomer seals One Way Valve Parts 080 LEVER, valve HOUSING, valve 3* 7204 SEAT, ball, nylon 2 4n 0230 NUT, hex; nylon cap; No * 024 SEAL, o-ring; fluoroelastomer 2 * 0242 SEAL, o-ring; fluoroelastomer 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 55 STU, valve; 3/8 npt(m) Model STU, valve; /4 npt(m) Model n 54 NUT, packing n STEM, valve GRIP, handle * These parts are included in Repair Kit 2755, which may n4 n0 n * 8* 3* 5* 2 5* 3*

11 One Way Valve Parts Model 2374, Series A 3/8 npt(m) x /4 npt(m), fluoroelastomer seals, carbide seat 0230 NUT, hex; nylon cap; No { 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 007 BALL, valve 008 STU, valve; 3/8 npt(m) 7 54 NUT, packing STEM, valve { SEAT, ball, carbide LEVER, valve HOUSING, valve 2{ 7204 SEAT, ball NIPPLE, /4 npt(m) WASHER, flat 3{ 2{ 5{ { 8 4{ 2{ { 3{ { These parts are included in Repair Kit 2373, which may Model 23280, Series A /4 npt(m) x /4 npt(m), fluoroelastomer seals, carbide seat 0230 NUT, hex; nylon cap; No { 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 007 BALL, valve 7 54 NUT, packing STEM, valve { SEAT, ball, carbide LEVER, valve HOUSING, valve 2{ 7204 SEAT, ball NIPPLE, /4 npt(m) WASHER, flat 3 0 3{ 2{ 5{ 4 7 4{ 8 4{ { These parts are included in Repair Kit 2373, which may 2{ { 3{ 3 308

12 Model 2057, Series B /4 npt(mbe), fluoroelastomer seals Model 2058, Series B; Model 24F07, Series A 3/8 npt(mbe), fluoroelastomer seals Model 2230, Series A 3/8 npt(mbe), PTFE seals 0230n NUT, hex; nylon cap; No { SEAL, o-ring; fluoroelastomer Models 2058 & * SEAL, o-ring; PTFE Model { SEAL, o-ring; fluoroelastomer Models 2058 & * SEAL, o-ring; PTFE Model *{ WASHER, flat, nylon *{ BALL, valve 5274 STU, valve; /4 npt(m) Model STU, valve; 3/8 npt(m) F448 One Way Valve Parts Model 2058 & 2230 only 2 STU, valve, 3/8 npt(m) nickel plated Model 24F n NUT, packing n STEM, valve 7204*{ SEAT, ball, nylon LEVER, valve HOUSING, valve Models 2057, 2058, 2230 F447 HOUSING, valve, nickel plated Model 24F07 2 * These parts are included in Repair Kit 2750, which may { These parts are included in Repair Kit 2755, which may Model 205, Series B 3/8 npt(m) x /4 npt(m), fluoroelastomer seals Model 2235, Series A 3/8 npt(m) x /4 npt(m), PTFE seals 0230n NUT, hex; nylon cap; No { SEAL, o-ring; fluoroelastomer Model * SEAL, o-ring; PTFE Model { SEAL, o-ring; fluoroelastomer Model * SEAL, o-ring; PTFE Model *{ WASHER, flat, nylon *{ BALL, valve 5274 STU, valve; /4 npt(m) 7 55 STU, valve; 3/8 npt(m) 8 54n NUT, packing 78745n STEM, valve *{ SEAT, ball, nylon LEVER, valve HOUSING, valve * These parts are included in Repair Kit 2750, which may { These parts are included in Repair Kit 2755, which may n n 0 n7 {*4 n8 {*4 n8 {*4 {*2 n {* {*3 3*{ *{ 5*{ {*0 {*3 7 {*4 {*2 2 3*{ 0*{ 5*{ 2 308

13 One Way Valve Parts Model 2384, Series A 3/8 npt(mbe), PTFE seals, stainless steel Model 2352, Series A 3/8 npt(m) x /4 npt(m), PTFE seals, stainless steel Model 24827, Series A /4 npt(mbe), PTFE seals, stainless steel n n8 *4 n 0230 NUT, hex; nylon cap; No *{ SEAL, o-ring; PTFE *{ SEAL, o-ring; PTFE *{ WASHER, flat, nylon *{ BALL, valve STU, valve /8 npt(m), Model /4 npt(m), Model 2352, STU, valve /8 npt(m) Model /4 npt(m) Model 2352, n 54 NUT, packing n STEM, valve 0 SEAT, ball, nylon 07{ Model * Model 2352, LEVER, valve HOUSING, valve *0 *3 7 n *4 *2 2 3* 0* 5* * These parts are included in Repair Kit 2353, which may { These parts are included in Repair Kit 24047, which may 3 Model 2308, Series A /4 npt(mbe), PTFE seals, stainless steel n 0230 NUT, hex; nylon cap; No * 0483 SEAL, o-ring; PTFE 3* 0482 SEAL, o-ring; PTFE 2 4* 400 WASHER, flat, nylon 2 5* BALL, valve STU, valve; /4 npt(m) 2 8n 54 NUT, packing n STEM, valve 0* 7204 SEAT, ball, nylon LEVER, valve HOUSING, valve GRIP, handle * These parts are included in Repair Kit 2353, which may n n8 *4 n *4 *2 0* 3* 2 5* 3* 0* 308 3

14 One Way Valve Parts Model 24040, Series A 3/8 npt(mbe), PTFE seals, carbide and PEEK seats, stainless steel n n 0230 NUT, hex; nylon cap; No n 0483 SEAL, o-ring; PTFE 3n 0482 SEAL, o-ring; PTFE 2 4n 400 WASHER, flat, nylon 2 5n 377 BALL, valve STU, valve; 3/8 npt(m) 2 8n 54 NUT, packing n 378 STEM, valve 0n 07 SEAT, ball, PEEK LEVER, valve HOUSING, valve 7n SEAT, ball, carbide n8 n4 n n4 n2 5n 3n 7n 0n 3n 2 834A Model 2404, Series A /4 npt(mbe), PTFE seals, carbide and PEEK seats, stainless steel, without handle 2n 0483 SEAL, o-ring; PTFE 3n 0482 SEAL, o-ring; PTFE 2 4n 400 WASHER, flat, nylon 2 5n 377 BALL, valve STU, valve; /4 npt(m) 2 8n 54 NUT, packing n 378 STEM, valve 0n 07 SEAT, ball, PEEK HOUSING, valve 7n SEAT, ball, carbide n8 n4 n n4 n2 2 5n 3n 7n 0n 3n 8347A 4 308

15 One Way Valve Parts Model 280, Series A /4 npsm(m) x 3/4-- unf--2a, PTFE seals n LEVER, valve HOUSING, valve 3* 7204 SEAT, ball, nylon 2 4n 0230 NUT, hex; nylon cap; No * 0482 SEAL, o-ring; PTFE 2 * 0483 SEAL, o-ring; PTFE 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 8038 NIPPLE, adapter; 3/4-- unf--2a(m) 0n 54 NUT, packing n STEM, valve NIPPLE, adapter; /4--8 npsm(m) * These parts are included in Repair Kit 2750, which may *5 2 *3 n0 n * 2 3* 8* 5* Model 24037, Series B /4 npt(mbe), PTFE seals n LEVER, valve HOUSING, valve 3* 7204 SEAT, ball, nylon 2 4n 0230 NUT, hex; nylon cap; No * 0482 SEAL, o-ring; PTFE 2 * 0483 SEAL, o-ring; PTFE 7* 400 WASHER, flat, nylon 2 8* 7874 BALL, valve 5274 STU, valve; /4 npt(m) 2 0n 54 NUT, packing n STEM, valve * These parts are included in Repair Kit 2750, which may *5 *3 n0 n * 2 8* 5* 3* 308 5

16 One Way Valve Parts Model /8 npt(m) one end, fluoroelastomer seals n 0 n 0230 NUT, hex; nylon cap; No { 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 7874 BALL, valve 55 STU, valve; 3/8 npt(m) 7n 54 NUT, packing 8n STEM, valve { 7204 SEAT, ball, nylon LEVER, valve HOUSING, valve AAPTER { These parts are included in Repair Kit 2755, which may 3 {3 { n7 {4 n8 {4 {2 5{ { 3{ Model /8 npt(m) one end, fluoroelastomer seals, carbide seat n 0 n 0230 NUT, hex; nylon cap; No { 0242 SEAL, o-ring; fluoroelastomer 3{ 024 SEAL, o-ring; fluoroelastomer 2 4{ 400 WASHER, flat, nylon 2 5{ 5273 BALL, valve 5274 STU, valve; 3/8 npt(m) 7n 54 NUT, packing 8n 873 STEM, valve { 7204 SEAT, ball, nylon LEVER, valve HOUSING, valve AAPTER { These parts are included in Repair Kit 2755, which may {3 3 { n7 {4 n8 {4 {2 5{ { 3{ 308

17 Check Valve Parts NOTE: To operate properly, the valve must be mounted in an upright position with the housing (Ref No. 3, below) facing up. CAUTION o not wash nitrile o-rings in aromatic thinners as these thinners cause the o-rings to deteriorate. Model psi (2 MPa, 20 bar) Maximum Working Pressure 3/8 npt(m) x 3/8 npsm(f) swivel HOUSING, valve BALL, sst; 0.5 in. (3 mm) dia HOUSING, adapter 4 70 PIN 5n 702 O-RING; nitrile rubber Model n 2 Model psi (2 MPa, 20 bar) Maximum Working Pressure 3/8 npt(m) x 3/8 npsm(f) 0_ swivel Model HOUSING, valve BALL, sst; 0.5 in. (3 mm) dia HOUSING, adapter 4 70 PIN 5n 702 O-RING; nitrile rubber 5n 2 Model psi (2 MPa, 20 bar) Maximum Working Pressure 3/8 npt(mbe) Model HOUSING, valve BALL, sst; 0.5 in. (3 mm) dia HOUSING, adapter 4 70 PIN 5n 702 O-RING; nitrile rubber 2 5n 308 7

18 Swivel Parts NOTE: For other high pressure swivels, see instruction manual Model psi (25 MPa, 250 bar) Maximum Working Pressure /4 npt(m) x /4 npsm(f) swivel, leather packings Model psi (25 MPa, 250 bar) Maximum Working Pressure /4 npt(m) x /4 npsm(f) swivel, PTFE packings 2 505*{ GLAN, male SPRING *{ GLAN, female HOUSING, swivel 24* V-PACKING, leather (Model 233) { V-PACKING, PTFE(Model 22334) 4 7 BOY not sold separately 7 {*4 {* {*2 Models 233 & * These parts are included in Repair Kit 20783, which may { These parts are included in Repair Kit , which may Model 242 This swivel is not repairable /2 npsm(f) x 3/8 npt(f), leather packings. Model s2425 and 242 Model 2425 This swivel is not repairable /4 npsm(f) x 3/8 npt(f), leather packings. Model psi (5 MPa, 50 bar) Maximum Working Pressure /4 npsm(f) x /4 npsm(m), PTFE seal Model SEAL; PTFE 8 HOUSING, swivel 7 BOY not sold separately

19 Notes 308

20 Graco Standard Warranty Graco warrants all equipment manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non--graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does notdisclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AN IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIE, INCLUING BUT NOT LIMITE TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale. Graco makes no warranty, and disclaims all implied warranties of merchantability and fitness for a particular purpose in connection with accessories, equipment, materials or components sold but not manufactured by Graco. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. FOR GRACO CANAA CUSTOMERS The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnaissent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées. Graco Information For the latest information about Graco products, visit TO PLACE AN ORER, contact your Graco distributor or call to identify the distributor closest to you: Phone: or Toll Free: Fax: All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. 2ULJLQO,QVWUXFWLRQV This manual contains English. MM 308 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AN SUBSIIARIES P.O. BOX 44 MINNEAPOLIS, MN USA Copyright 3, Graco Inc. All Graco manufacturing locations are registered to ISO 00 Revised 08/

Back Pressure Regulator

Back Pressure Regulator Instructions Parts List STAINLESS STEEL, WATERBASE COMPATIBLE Back Pressure Regulator 308401E For use in circulating systems to provide regulated back pressure to spray gun(s) and to maintain proper system

More information

Color/Catalyst Dispense Valves

Color/Catalyst Dispense Valves Instructions-Parts Color/Catalyst Dispense Valves 332454C EN To dispense color, catalyst, solvent, and acid in a ProMix PD2K Electronic Proportioning System with the color change option. For professional

More information

INSTRUCTIONS PARTS LIST U.S. PAT: 6,874,404; 6,516,707; 6,223,645

INSTRUCTIONS PARTS LIST U.S. PAT: 6,874,404; 6,516,707; 6,223,645 3076-AFCM-000 INSTRUCTIONS PARTS LIST INSTRUCTIONS! This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. AQ Air Flow Control (3076-AFC3-000) (3076-AFC4-000) U.S. PAT: 6,874,404;

More information

INSTRUCTIONS PARTS LIST

INSTRUCTIONS PARTS LIST 3066V-E INSTRUCTIONS PARTS LIST INSTRUCTIONS! This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. AQ Poppet Color Valve (3066-41-00A) 304 Stainless Steel Body Autoquip,

More information

OPERATION. Zinc Sprayer. For Maximum Working Pressure see page 2. Rev. E

OPERATION. Zinc Sprayer. For Maximum Working Pressure see page 2. Rev. E OPERATION 309362 Rev. E U.S. Patent Pending Related manuals Zinc Sprayer....... 309340 List of Models, page 2 For Maximum Working Pressure see page 2....... 309092, 308438.. 307049.. 309342 INSTRUCTIONS

More information

BACK PRESSURE VALVE. Instructions Parts List J

BACK PRESSURE VALVE. Instructions Parts List J Instructions Parts List BACK PRESSURE VALVE 306770J 300 psi (2.1 MPa, 21 bar) Maximum Inlet Pressure 180 psi (1.2 MPa, 12 bar) Maximum Regulated Pressure Model 206019, Series F For use with Monark, President

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 306860 Rev. M HIGH PRESSURE Back Pressure Regulator

More information

Fire-Ball 300 and 425 Grease Pumps

Fire-Ball 300 and 425 Grease Pumps Instructions Parts List Fire-Ball 300 and 425 Grease Pumps Stationary installations and mobile units for pumping non-corrosive and non-abrasive lubricants. Important Safety Instructions. Read all warnings

More information

Fluid Regulators. Instructions -Parts List. Table of Contents Z EN HIGH PRESSURE

Fluid Regulators. Instructions -Parts List. Table of Contents Z EN HIGH PRESSURE Instructions -Parts List HIGH PRESSURE Fluid Regulators 306878Z EN For use in airless spray systems to control and regulate fluid pressure to one spray gun, dispensing valve, or atomizing head. For professional

More information

2-Liter Pressure Cup. Instructions - Parts List C

2-Liter Pressure Cup. Instructions - Parts List C Instructions - Parts List 2-Liter Pressure Cup 309925C Model 234413 50 psi (345 kpa, 3.4 bar) Maximum Fluid Pressure 160 psi (1.1 MPa, 11 bar) Maximum Air Inlet Pressure This manual contains important

More information

Pistol-Grip Mastic Flo-Gun

Pistol-Grip Mastic Flo-Gun Instructions - Parts List Pistol-Grip Mastic Flo-Gun 308124H EN For spraying heavy mastic sealants. Model 224526, Series A Basic Gun Model 224472 Complete Gun with Wand 5000 psi (27.6 MPa, 276 bar) Maximum

More information

Instructions Parts List. Contents E. HIGH VOLUME Air Control Kits. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure

Instructions Parts List. Contents E. HIGH VOLUME Air Control Kits. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure Instructions Parts List HIGH VOLUME Air Control Kits 250 psi (.7 MPa, 7.2 bar) Maximum Air Inlet Pressure 3088E Contents List of Models........................... 2 Warnings...............................

More information

Heavy Fluid Air Spray Gun

Heavy Fluid Air Spray Gun Instructions Parts List Heavy Fluid Air Spray Gun 306494J 2000 psi (14.0 MPa, 140 bar) Maximum Fluid Working Pressure 100 psi (0.7 MPa, 7 bar) Maximum Air Working Pressure Part No. 204000, Series J With

More information

Instructions Parts List

Instructions Parts List Instructions Parts List AIR-OPERATED Fluid Pressure Regulator 308098H 100 psi (0.7 MPa, 7 bar) Maximum Fluid and Air Pressure Part No. 235287 Standard Fluid Pressure Regulator For use with low pressure

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST 307 22 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. T Supersedes Rev. R and PCN T STAINLESS

More information

For use with all Graco/Gusmer spray guns (not included). 3 Gallon Solvent Tank

For use with all Graco/Gusmer spray guns (not included). 3 Gallon Solvent Tank Instructions - Parts Gun Service Kits 311340C EN For use with all Graco/Gusmer spray guns (not included). Part No. 296980 1 quart (0.95 liter) Solvent Cup 120 psi (0.83 MPa, 8.3 bar) Maximum Working Fluid

More information

Huskyt/ Twistorkt Package

Huskyt/ Twistorkt Package Instructions-Parts List Huskyt/ Twistorkt Package 308656G EN Usedtomixandtransferfluidsinbung-type,55-gallon(200-liter) drums. For professional use only. 100psi(0.69MPa,6.9bar)MaximumAirInputPressure Model

More information

3600 psi (25.0 MPa, 250 bar) Maximum Fluid Working Pressure

3600 psi (25.0 MPa, 250 bar) Maximum Fluid Working Pressure INSTRUCTIONS-PARTS LIST 308 333 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. C Supersedes Rev. A and PCN C 30:1

More information

Fluid Regulators. Instructions/Parts List C. High Pressure II 2 G. Read warnings and instructions. See page 3 for model information.

Fluid Regulators. Instructions/Parts List C. High Pressure II 2 G. Read warnings and instructions. See page 3 for model information. Instructions/Parts List High Pressure Fluid Regulators 309475C Read warnings and instructions. See page 3 for model information. Graco Inc. P.O. Box 44 Minneapolis, MN 55440-44 Copyright 2002, Graco Inc.

More information

50:1 Fire Ball 300 Pump Module

50:1 Fire Ball 300 Pump Module Instructions Parts List 50:1 Fire Ball 300 Pump Module 308955F For automatic lubrication systems only. Part No. 241573, Series C 3500 psi (24.1 MPa, 241 bar) Maximum Fluid Outlet Pressure 70 psi (0.48

More information

Instructions Parts List

Instructions Parts List Instructions Parts List HIGH PRESSURE Back Pressure Regulator 306860S For use in a high pressure spray circulating system to regulate back pressure to gun(s) and maintain proper pressure for circulation.

More information

2-Quart (1.9 Liter) Pressure Cup

2-Quart (1.9 Liter) Pressure Cup Instructions-Parts 2-Quart (1.9 Liter) Pressure Cup 312111A For controlling atomizing air and fluid pressure for any pressure feed manual spray gun when more than one quart of fluid will be used. 288776

More information

Instructions Parts List

Instructions Parts List Instructions Parts List AIR OPERATED, WATERBASE COMPATIBLE DynaMite Dispense Valves Maximum Fluid Viscosity: 600,000 Centipose 900 psi (63 bar) Maximum Fluid Working Pressure 100 psi (7 bar) Maximum Air

More information

Instructions Parts List

Instructions Parts List Instructions Parts List AIR OPERATED Fluid Pressure Regulator 306813J 250 psi (1.8 MPa, 18 bar) Maximum Inbound Fluid Pressure 30 psi (210 kpa, 2.1 bar) Maximum Inbound Air Pressure 0 30 psi (0 210 kpa,

More information

OPERATION / 3Z9305G 1:1 RATIO TRITON / Spray Packages / / / List of Models, page 2 / / / 100 psi (7 bar, 0.7 MPa) Maximum Working Pressure

OPERATION / 3Z9305G 1:1 RATIO TRITON / Spray Packages / / / List of Models, page 2 / / / 100 psi (7 bar, 0.7 MPa) Maximum Working Pressure OPERATION / / 1:1 RATIO TRITON / 3Z9305G Spray Packages / / / List of Models, page 2 / / / 100 psi (7 bar, 0.7 MPa) Maximum Working Pressure Related manuals....... 309304, Parts /....... 309303, Pump /.......

More information

Fluid Pressure Regulators

Fluid Pressure Regulators Instructions -Parts List STAINLESS STEEL, WATERBASE COMPATIBLE Fluid Pressure Regulators 30722ZAE EN Used to regulate fluid pressure in low pressure systems only. FluidFlowupto3GPM(liters/min) Important

More information

Instructions Parts List. Table of Contents H. AIR OPERATED Valve Assembly

Instructions Parts List. Table of Contents H. AIR OPERATED Valve Assembly Instructions Parts List AIR OPERATED Valve Assembly 310503H This air-opened, air-closed valve can be used to control material flow of adhesive and sealant materials, such as two-part methacrylic adhesives,

More information

Feed and Solvent Flush Kits

Feed and Solvent Flush Kits Instruction - Parts Feed and Solvent Flush Kits 310863M EN For use with proportioner systems. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual.

More information

Hotmelt/Warm Melt Heated Hose

Hotmelt/Warm Melt Heated Hose Instructions Hotmelt/Warm Melt Heated Hose 309160L For use with Graco temperature control systems for nonflammable hotmelt and warm melt sealants and adhesives. Fire, Explosion, and Electric Shock Hazard

More information

Instructions Parts List

Instructions Parts List Instructions Parts List 55:1 RATIO KING Air-Powered Ram and Supply Pump 307538M 4950 psi (34.0 MPa, 340 bar) MWP Model 222546, Series C Severe-Duty King Pump with Ultra-High Molecular Weight Polyethylene

More information

Dyna-Star HP Pump System

Dyna-Star HP Pump System Instructions, Repair and Parts Dyna-Star HP Pump System 332540B EN Provides lubricant flow and pressure to operate a single line parallel automatic lubrication system. For automatic lubrication systems

More information

APS-100 Primer Spray Module

APS-100 Primer Spray Module Instructions Parts List APS-100 Primer Spray Module 310109G Used to circulate, dispense, and apply AFS primers. Not for use in Explosive Atmosphere locations. Module 970246 100 psi (0.7 MPa, 7 bar) Maximum

More information

Instructions-Parts List

Instructions-Parts List Instructions-Parts List HIGH PRESSURE, MEIUM VOLUME red alert Filters For filtration of common industrial paints and coatings in finishing applications. For professional use only. 3075P EN 3000 psi(.0

More information

15:1 Ratio Fire-Ball Undercoater Pumps

15:1 Ratio Fire-Ball Undercoater Pumps Instructions - Parts List 15:1 Ratio Fire-Ball Undercoater Pumps 307879R EN Portable stationary units for filled undercoating materials. For professional use only. Model 222077 35 lb. portable dispense

More information

M2K Mix Manifolds. Instructions - Parts B EN. Part 17D763 - M2K manifold Part 24W861 - Remote M2K manifold

M2K Mix Manifolds. Instructions - Parts B EN. Part 17D763 - M2K manifold Part 24W861 - Remote M2K manifold Instructions - Parts M2K Mix Manifolds 334625B EN For proportional mixing of plural component coatings. For professional use only. Part 17D763 - M2K manifold Part 24W861 - Remote M2K manifold See page

More information

LD Series Enclosed Hose Reels

LD Series Enclosed Hose Reels Instructions LD Series Enclosed Hose Reels 313938K EN For dispensing air, water, antifreeze, windshield washer solvent, transmission fluid, oil and grease. Not recommended for outdoor use. Not approved

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 308647 Rev. E STAINLESS STEEL, WATERBASE-COMPATIBLE,

More information

Series 500 Hose Reels

Series 500 Hose Reels Instructions Parts List Series 500 Hose Reels 30809Z Used to dispense lubrication products, air, water, transmission fluid and antifreeze. Important Safety Instructions. Read all warnings and instructions

More information

Series 350 Hose Reels

Series 350 Hose Reels Instructions Parts List Series 350 Hose Reels 308400ZAA Used to dispense lubrication products, air, water, transmission fluid and antifreeze. NOTE: These hose reels are for stationary mountings only and

More information

Husky 307 Air Spray/HVLP Systems

Husky 307 Air Spray/HVLP Systems INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 308 228 Rev. J Supersedes Rev H and PCN J Husky

More information

SSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR

SSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR S S F U SSFU SUPER SPRAYFAST UNIVERSAL ADHESIVE APPLICATOR MACHINERY DIVISION OWNER S MANUAL UNIT INSTRUCTIONS Please follow all SSFU Safety Instructions. Contact your Duro Dyne Tech Service if you have

More information

Series 700 Hose Reels

Series 700 Hose Reels Instructions Parts List Series 700 Hose Reels 308546S EN These reels are used in applications requiring long range dispense, transfer, or evacuation of fuels, lubricants, other automotive fluids, and air,

More information

Finex Airspray Package Sprayer

Finex Airspray Package Sprayer Instructions - Parts Finex Airspray Package Sprayer 312473B ENG Package solutions for pumping and spraying finishing materials. For professional use only. Important Safety Instructions Read all warnings

More information

Instructions Parts List

Instructions Parts List Instructions Parts List STAINLESS STEEL, WATERBASE-COMPATIBLE, HIGH PRESSURE Fluid Pressure Regulators 0867N For precise downstream pressure and flow control. Important Safety Instructions Read all warnings

More information

Instructions Parts List

Instructions Parts List Instructions Parts List 74:1 RATIO PREMIER CARBON STEEL Cart-Mounted Airless Package 308415P WITH DURA-FLO 1100 DISPLACEMENT PUMP 50.0 MPa, 500 bar (7252 psi) Maximum Working Pressure 0.67 MPa, 6.7 bar

More information

INSTRUCTIONS PARTS LIST

INSTRUCTIONS PARTS LIST INSTRUCTIONS PARTS LIST 307 890 This manual contains IMPORTANT WARNINGS AND INSTRUCTIONS READ AND RETAIN FOR REFERENCE STAINLESS STEEL, WATERBASE COMPATIBLE, LOW SHEAR FLUID PRESSURE REGULATOR 250 psi

More information

Wall Mount Airless Packages

Wall Mount Airless Packages Instructions Parts List Wall Mount Airless Packages 308756G Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. See page 2 for model numbers and maximum

More information

Series 250 Hose Reels

Series 250 Hose Reels Instructions Parts List Series 250 Hose Reels 308899M Used to dispense lubrication products, air, water, transmission fluid, antifreeze and windshield washer solvent. See pages 5 7 for Hose Reel Part Nos.,

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST 307 044 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. M Supersedes Rev. L Divorced Design,

More information

Instructions Parts List

Instructions Parts List Instructions Parts List STAINLESS STEEL (ASME) 5-, 10-, and 15-Gallon Pressure Tanks Maximum Air Inlet Pressure: 100 psi (0.7 MPa, 7 bar) Maximum Working Fluid Pressure Low-Pressure Regulated Tank: 15

More information

Instructions Parts List

Instructions Parts List Instructions Parts List 55 Gallon, 55:1 Bulldog Module Supply Units 310310B 4950 psi (347 bar) Maximum Working Pressure Model 970022, Tandem with Pneumatic Crossover Model 970023, Tandem with Electric

More information

Cart Mounted Air Assisted Package

Cart Mounted Air Assisted Package Instructions Parts List Cart Mounted Air Assisted Package Table of Contents List of Models.................................. 2 Warnings...................................... 3 Setup.........................................

More information

President 10:1 Ratio Powerflo System

President 10:1 Ratio Powerflo System Instructions Parts List President 10:1 Ratio Powerflo System 306472H 5 Gallon (19 Liter) or 10 Gallon (38 Liter) Portable Cart Mounted System 1750 psi (121 bar) Maximum Working Pressure 175 psi (12.1 bar)

More information

RS Gun Universal Adapter Kit

RS Gun Universal Adapter Kit Instructions RS Gun Universal Adapter Kit 3A1226D EN For installing the RS Gun onto existing hose bundles. For professional use only. Part 257754 See page 9 for maximum working pressures. Important Safety

More information

Instructions-Parts List

Instructions-Parts List Instructions-Parts List STAINLESS STEEL 2-Gallon Pressure Tanks 308370P EN Industrial grade pressure tanks used to supply, agitate, and pressurize finishing liquids. For professional use only. Maximum

More information

INSTRUCTIONS PARTS LIST

INSTRUCTIONS PARTS LIST INSTRUCTIONS PARTS LIST 308 845 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. C ACETAL HUSKY 307, WALL-MOUNT

More information

Instructions Parts List

Instructions Parts List Instructions Parts List STAINLESS STEEL Falcon and Falcon II Pumps With Severe-Duty Rod and Cylinder Part No. 41594 Pump, Series B, 10:1 Ratio, with Falcon Air Motor 1500 psi (10.3 MPa, 103.5 bar) Maximum

More information

WARNING: HIGH PRESSURE.

WARNING: HIGH PRESSURE. Instructions Pole Gun with CleanShot Shut-Off Valve and Contractor In-line Valve For the application of architectural paints and coatings 3600 psi (248 bar, 24.8 MPa) Maximum Working Pressure Important

More information

1:1 Extruder. Operation H EN. Table Of Contents. Part No Part No

1:1 Extruder. Operation H EN. Table Of Contents. Part No Part No Operation 1:1 Extruder 310726H EN Supply, metering and dispense system for 5 gallon (20 Liter) pails. For professional use only. Not approved for use in European explosive atmosphere locations. Part No.

More information

Volumetric Fluid Flow Meter High Pressure Meters 4000 psi (28 MPa, 276 bar) Maximum Working Fluid Pressure

Volumetric Fluid Flow Meter High Pressure Meters 4000 psi (28 MPa, 276 bar) Maximum Working Fluid Pressure Instructions Parts List Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Volumetric Fluid Flow Meter High Pressure Meters 4000 psi (28 MPa, 276

More information

Instructions Truck Mounted Bare Hose Reel for Grease

Instructions Truck Mounted Bare Hose Reel for Grease Instructions Truck Mounted Bare Hose Reel for Grease 3A1942A ENG For dispensing grease in lube truck applications. For professional use only. Not approved for use in European explosive atmosphere locations.

More information

Therm-O-Flow Plus For all Drum Unloaders

Therm-O-Flow Plus For all Drum Unloaders Installation Operation Therm-O-Flow Plus For all Drum Unloaders 309180E Refer to Graco Form 309085 for further information, including parts and service Important Safety Instructions Read all warnings and

More information

Instructions Parts List

Instructions Parts List Instructions Parts List 2 BUNG MOUNT, 200 LITER (55 GALLON) DRUM SIZE 10:1 Ratio President Pump Part No. 239326, Series A 62 bar (6.2 MPa, 900 psi) Maximum Fluid Working Pressure 6.2 bar (0.62 MPa, 90

More information

G700N Air Spray Package

G700N Air Spray Package INSTRUCTIONS-PARTS LIST 308 447 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. C Supersedes Rev B and PCN C HUSKY

More information

Hose Reel Enclosure Retrofit Kit

Hose Reel Enclosure Retrofit Kit Instructions Hose Reel Enclosure Retrofit Kit 332143A EN Retrofits the Series 500 Hose Reel Enclosure for use with a XD20 Series Hose Reel. For professional use only. Kit No. 24P914 Important Safety Instructions

More information

Instructions Parts List

Instructions Parts List Instructions Parts List SEVERE DUTY Stainless Steel Pumps 308106G For airless and air assisted spraying of finishing materials. Important Safety Instructions Read all warnings and instructions in this

More information

Instructions Parts List

Instructions Parts List Instructions Parts List HIGH FLO SERIES Surge Tanks 307707ZAS These tanks reduce fluid surging in a high or medium volume, low pressure fluid system. For professional use only. Important Safety Instructions

More information

Operation and Parts 3A5616A EN ADJUSTABLE FLOW CAP KIT

Operation and Parts 3A5616A EN ADJUSTABLE FLOW CAP KIT Operation and Parts ADJUSTABLE FLOW CAP KIT 3A5616A EN To allow variable flow to the Fusion AP gun. For use with Fusion AP gun only. For professional use only. Not approved for use in explosive atmosphere

More information

INSTRUCTIONS PARTS LIST

INSTRUCTIONS PARTS LIST INSTRUCTIONS PARTS LIST 308 821 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. A ACETAL HUSKY 307, LIGHT-DUTY

More information

INSTRUCTIONS PARTS LIST

INSTRUCTIONS PARTS LIST 3286G INSTRUCTIONS PARTS LIST INSTRUCTIONS! This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Autoquip, Inc. AQ Fluid Regulator 3286-00-00B IMPORTANT: Before using this

More information

Cart-Mounted Airless Package

Cart-Mounted Airless Package INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 425 Rev. C Supersedes B 56:1 RATIO KING CARBON STEEL Cart-Mounted Airless

More information

Electric Airless Sprayer

Electric Airless Sprayer Operation Electric Airless Sprayer 332761A EN - For portable spray applications of architectural paints and coatings - - For professional use only - - Not approved for use in explosive atmospheres or hazardous

More information

Pole Gun with Cleanshott Shut-off Valve and Contractort In-line Valve

Pole Gun with Cleanshott Shut-off Valve and Contractort In-line Valve INSTRUCTIONS -PARTS LIST Pole Gun with Cleanshott Shut-off Valve and Contractort In-line Valve 309237 Rev. G Important Safety Instructions Read all warnings and instructions in this manual. Save these

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 306 694 Rev. W Supersedes Rev U and PCN W HYDRA

More information

Cart Mounted, Heated Air Assisted Package

Cart Mounted, Heated Air Assisted Package Instructions Parts List Cart Mounted, Heated Air Assisted Package 308693L EN Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Model 231979 Shown

More information

INSTRUCTIONS-PARTS LIST

INSTRUCTIONS-PARTS LIST INSTRUCTIONS-PARTS LIST 307319 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. V FOR SUPPLYING ONE OR TWO AIR SPRAY

More information

President 10:1 Ratio Air Spray System

President 10:1 Ratio Air Spray System Instructions Parts List President 10:1 Ratio Air Spray System 309489E For transfer or supply of compatible fluids. With Evenflo Automatic Pressure Control Model 954088, Series A 180 psi (12 bar, 1.2 MPa)

More information

Instructions Parts List

Instructions Parts List Instructions Parts List : RATIO TRITON 308 Diaphragm Pump 309303G 5 psi (0.8 MPa, 8 bar) Maximum Fluid Working Pressure 5 psi (0.8 MPa, 8 bar) Maximum Air Input Pressure Part No. 33500 Aluminum Pump, Series

More information

T2 2:1 Ratio Transfer Pump

T2 2:1 Ratio Transfer Pump Instructions T2 2:1 Ratio Transfer Pump 311882M EN For use with polyurethane foam, polyurea, and similar non-flammable materials. For professional use only. Not for use in explosive atmospheres. Model

More information

Cart-Mounted Zinc Spray Package

Cart-Mounted Zinc Spray Package INSTRUCTIONS-PARTS LIST This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 629 Rev. A INSTRUCTIONS 33:1 RATIO BULLDOG CARBON STEEL Cart-Mounted Zinc Spray Package

More information

Cart-Mounted Airless Package

Cart-Mounted Airless Package INSTRUCTIONS-PARTS LIST This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 627 Rev. A INSTRUCTIONS 56:1 RATIO KING CARBON STEEL Cart-Mounted Airless Package WITH

More information

Instructions Parts List

Instructions Parts List Instructions Parts List WALL MOUNT OR FLOOR STAND, HIGH FLO 4:1 Ratio, Bulldog Circulation Packages 310569D For high production circulation of fluids. Related Manuals: 307107 Fluid Regulator 307304 Bulldog

More information

Custom PR. Operation - Maintenance 3A0241A. This machine is intended to dispense two-component, silicone-based materials only.

Custom PR. Operation - Maintenance 3A0241A. This machine is intended to dispense two-component, silicone-based materials only. Operation - Maintenance Custom PR 3A0241A This machine is intended to dispense two-component, silicone-based materials only. Important Safety Instructions Read all warnings and instructions in this manual.

More information

Instructions Parts List

Instructions Parts List Instructions Parts List WALL MOUNT OR FLOOR STAND 4:1 Ratio, Glutton Circulation Packages For heavy duty, medium volume circulation of fluids. 310564D Read warnings and instructions. See page 2 for Table

More information

Instructions Parts List

Instructions Parts List Instructions Parts List STAINLESS STEEL Dura Flo 750 Pumps 308418G With Severe Duty Rod and Cylinder Patent No. 5,456,583 Foreign Patents Pending Read warnings and instructions. See page 2 for model numbers

More information

Instructions Parts List

Instructions Parts List Instructions Parts List 19 LITER (5 GALLON) SIZE Ram Mounted Pumps 306839P Important Safety Instructions. Read all warnings and instructions in this manual. Save these instructions. See page 2 for model

More information

GlasCraft Catalyst Pump

GlasCraft Catalyst Pump Repair - Parts GlasCraft Catalyst Pump 3A1218D ENG For use with Graco polyester resin and gel coat systems. For professional use only. See page 2 for models. Important Safety Instructions Read all warnings

More information

AA200hs Air-Assisted Airless Spray Package

AA200hs Air-Assisted Airless Spray Package INSTRUCTIONS PARTS LIST 308 457 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE 23:1 MONARK CARBON STEEL, CART MOUNTED AA200hs Air-Assisted Airless Spray Package

More information

High Speed Spindl-Gard Lubrication System with Electric Pump

High Speed Spindl-Gard Lubrication System with Electric Pump Instructions High Speed Spindl-Gard Lubrication System with Electric Pump 313444B EN For applying a constant quantity of oil directly to rotating bearing elements that operate at speeds greater than 250,000

More information

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE INSTRUCTIONS PARTS LIST 307 900 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE STAINLESS STEEL (ASME) Pressure Tanks 100 psi (7 bar) Maximum Working Pressure with

More information

HVLP EDGE Gun G EN

HVLP EDGE Gun G EN HVLP EDGE Gun 313317G EN - For the application of architectural paints and coatings. The HVLP Edge gun is not intended to be used on an external compressor. - Models: 256855, 257092, 256856 Maximum Fluid

More information

Instructions Parts List

Instructions Parts List Instructions Parts List CARBON STEEL Dura Flo 00 Pumps 308357G With Severe Duty Rod and Cylinder Part No. 236932 Pump, Series A, 74: Ratio with Premier Air Motor and 236478 Displacement Pump 50.0 MPa,

More information

Instructions Parts List

Instructions Parts List Instructions Parts List SEVERE-DUTY, UHMWPE/PTFEPACKED Stainless Steel Pumps 55 GALLON (200 LITER) DRUM SIZE, WITH BUNG ADAPTER 308118J Model 224348, Series C 10:1 Ratio President Pump 1800 psi (12.4 MPa,

More information

Hydra-Cat Proportioners

Hydra-Cat Proportioners Operation Hydra-Cat Proportioners For fixed ratio proportioning of 2 component reactive materials. SPRAY-QUIP, INC. 1754 DES JARDINES ST. HOUSTON, TX 77023 PH.: 713-923-2771 WWW.SPRAYQUIP.COM 310795C Important

More information

Cart-Mounted Airless Package

Cart-Mounted Airless Package INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 476 Rev. B Supersedes A 33:1 RATIO BULLDOG AND 68:1 RATIO KING CARBON STEEL

More information

Husky 1050A, CSA-Certified Diaphragm Pumps

Husky 1050A, CSA-Certified Diaphragm Pumps Operation Husky 1050A, CSA-Certified Diaphragm Pumps 313598C ENG Intended for fluid transfer applications powered by sweet natural gas (less than 4 ppm hydrogen sulfide) in accordance with American and

More information

Indy-X. Operation GC-1367K ENG. Low emission external-mix dispense gun for use with polyester resin and gel coat. For professional use only.

Indy-X. Operation GC-1367K ENG. Low emission external-mix dispense gun for use with polyester resin and gel coat. For professional use only. Operation Indy-X GC-1367K ENG Low emission external-mix dispense gun for use with polyester resin and gel coat. For professional use only. Maximum fluid working pressure: 2000 psi (14 MPa, 138 bar) Maximum

More information

Husky Air-Operated Diaphragm Pump

Husky Air-Operated Diaphragm Pump Operation Husky 15120 Air-Operated Diaphragm Pump 3A2888A EN Polypropylene or PVDF pumps for fluid transfer applications. For professional use only. Not for use in European explosive atmosphere locations.

More information

Operation. Diaphragm Pump 3A2578D. Maximum Working Pressure: 125 psi (0.86 MPa, 8.6 bar) Read all warnings and instructions in this manual and in your

Operation. Diaphragm Pump 3A2578D. Maximum Working Pressure: 125 psi (0.86 MPa, 8.6 bar) Read all warnings and instructions in this manual and in your Operation Husky 2200 Air-Operated Diaphragm Pump 3A2578D EN Polypropylene and PVDF pumps for fluid transfer applications, including high viscosity materials. For professional use only. Not for use in European

More information

Operation. Interior Texture Sprayer TX B. For Water-Based Materials Only

Operation. Interior Texture Sprayer TX B. For Water-Based Materials Only Operation Interior Texture Sprayer TX 65 311763B EN Model 254970: 50 psi (3.5 bar) Maximum Fluid Working Pressure 100 psi (7 bar) Maximum Air Input Pressure For Water-Based Materials Only Important Safety

More information