There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively.
|
|
- Nathan McCoy
- 6 years ago
- Views:
Transcription
1 OSHA 10 GENERAL INDUSTRY FACT SHEETS The following Fact Sheets are provided to assist the student in identifying content and learning objectives for each module presented in the training course. There is one Fact Sheet for each module presented in the course. They are easily printed either singly or collectively. OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 1 OF 18
2 Introduction to OSHA o This training module familiarizes you with the basics of the Occupational Safety and Health Act as specified by the Occupational Safety and Health Administration (OSHA). It is designed to supplement other formal presentations on OSHA safety standards. o Estimated length: 40 minutes o Audience: Foreman, supervisors, and managers o Upon completion, the student should be familiar with why OSHA exists; what OSHA standards do and do not cover; and the importance of adhering to guidelines, including consequences for failing to do so. o Title 29 Code of Federal Regulations 1910 o National Institute of Occupational Safety and Health (NIOSH) o Employer and employee rights and responsibilities o Inspections, violations, and citations o Federal versus state law o OSHA history and standards OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 2 OF 18
3 Electrical Safety and LOTO o This course will Introduce electrical safety concepts, identify hazardous electrical energy sources, explain electrical hazards, explain the concept of lock-out/tag-out and provide solutions for the control of hazardous electrical energies. o Estimated length: 60 minutes o Audience: Employees, supervisors, and managers who work with electrical equipment. Given current OSHA and industry information regarding workplace illnesses, injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will be able to understand and recognize hazards associated with electricity. o Specifically, the student will be able to: Identify major hazards associated with electricity Describe the types of electrical hazards and their effect on the human body Protect themselves from exposure to electrical hazards Recognize employer requirements to protect workers from electrical hazards o Basics of Electricity o Basic Electrical Safety o Electrical Hazards o Safe Work Practices o Circuit Protection Devices o Equipment Design o Protective Equipment o Control of Hazardous Energy o Methods of Isolation o Energy Control Program o Working With Electricity OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 3 OF 18
4 Ergonomics in the General Industry o This training is intended for workers, unions, supervisors, contractors, safety specialists, human resources managers anyone with an interest in safe construction work sites. Some of the most common injuries in the workplace are the result of job demands that push the human body beyond its natural limits. Workers who must often lift, stoop, kneel, twist, grip, stretch, reach overhead, or work in other awkward positions are at risk of developing a work-related musculoskeletal disorder (WMSD). o Estimated length: 1 hour At the end of this course, the student should be able to: o Identify the major hazards associated with MSD and RMD type injury and illness. o Describe types of activities that can lead to MSD and RMD injury and illness. o Tools and a better understanding of how to protect themselves from MSD and RMD injury and illness producing hazards. o Recognize employer requirements to protect workers from exposure to MSD and RMD injuries. o OSHA.gov o Section on Ergonomics located at the link below o o Basics o Ergonomic Disorders o Hazards Recognition o Hazard Control o Simple Solutions OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 4 OF 18
5 Exit Routes, etal o This course will review just a few of the horrible events that justify the requirement to regulate exit routes, and mandate emergency action and fire prevention plans. Course will also familiarize the student with the coverage of the regulations, some common definitions, design and construction requirements, safeguards for exit routes, basics of emergency action and fire prevention plans and more. o Estimated length: 1 hour o Audience: managers, superintendents, foreman, crew leaders, employers, and anyone with safety responsibilities. o Given current industry information regarding occupational injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will be able to explain the importance of Exit Routes, Emergency Action Plans, Fire Prevention Plans and Fire Protection in the workplace o Specifically, the student will be able to: Explain the importance of emergency egress & access, planning, fire prevention and protection Describe the purpose for emergency planning and preparation and how it saves lives Utilize the emergency systems & processes to protect themselves from injury Recognize employer requirements to provide emergency exit routes, response plans and fire protection and prevention programs for the protection of employees o References for this course include various sections of OSHA regulations found in 29 CFR Part 1910, and others that may be relevant to the presentation. o Coverage / Definitions o Design / Construction o Safeguards etc. for Exit Routes o Emergency Action Plans o Fire Prevention Plans o Portable Fire Extinguishers OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 5 OF 18
6 Hazardous Materials in the Workplace o This training module covers methods to prevent chemical exposure that may cause or contribute to many serious health effects such as heart ailments, central nervous system, kidney and lung damage, sterility, cancer, burns, and rashes. Some chemicals may also be safety hazards and have the potential to cause fires and explosions and other serious accidents. o Estimated length: 1 hour o Audience: Foremen, Supervisors, other workers o Given current OSHA and industry information regarding workplace illnesses, injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will be able to identify hazardous substances and protect themselves from their hazards. Specifically, the student will be able to: Identify major health hazards associated with hazardous substances Describe types of hazards associated with hazardous substances Protect themselves hazardous substances Training and information specifically on Flammable and Combustible Liquids, Spray Finishing Compressed Gases, Dipping and Coating Operations Recognize employer requirements to protect workers from exposure to hazardous substances. o Title 29 of the Code of Federal Regulations, sections 1910 Subpart H, Hazardous Materials o Background o Route of Exposure o Hazard Factors o Harmful Effects o Forms of Hazardous Substances o Exposure Limits o Hazard Prevention and Control o Odors and More o Other Considerations o Handling / Storage o Flammable / Combustible Liquids o Spray Finishing o Compressed Gases o Dipping and Coating Operations o Employer Responsibility o Sources of Information and Assistance OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 6 OF 18
7 OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 7 OF 18
8 Hazard Communication o This module is intended to familiarize the student with the basics of OSHA's Hazard Communication Standard (also known as right to know), but more importantly, will address the hazards and controls required for managing hazardous materials and hazardous substances. See for more information, Sections through This standard applies to nearly all workplaces in general industry except mobile workplaces such as vehicles or vessels. o Estimated length: 1 hour o Given current OSHA and industry information regarding workplace illnesses, injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will understand their right-to-know the identities and hazardous properties of the chemicals they are exposed to in the workplace. o Specifically, the student will be able to: Exercise their right-to-know the identities and hazardous properties of chemicals used in their workplace Describe both acute & chronic health effects that result from exposure to hazardous chemicals Protect themselves from exposure to health hazards Recognize employer requirements to communicate hazards and protect workers from health hazards o The primary reference is 29 CFR o Employer / Employee Obligations o Physical / Health Hazards o Material Safety Data Sheets o Labeling RDS&p_id= own-and-probable-human-carcinogens OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 8 OF 18
9 OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 9 OF 18
10 Leading Cultural Change o This training module discusses the current safety culture in the construction industry. It is designed to give workers knowledge of how to improve the current culture and minimize hazards during their workday. o Estimated length: 45 minutes o Audience: Workers, Supervisors, Managers o Discuss Past & current safety performance o Identify cultural challenges in the construction industry o Describe the role of the workforce in improving the current culture o Understand how to protect yourself and others from serious injury and death through personal responsibility to change the current culture o Recognize the role of management in improving the current culture o Title 29 of the Code of Federal Regulations, section o History of Safety o Construction Safety Today o General Duty Clause o What Causes Injuries o Unsafe Conditions o Unsafe Acts o Changing the Culture o Safety Leadership Skills OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 10 OF 18
11 Machine Guarding o This presentation is designed as basic outreach safety and health training for workers working with or near operating machinery. Since workers are the target audience, this presentation emphasizes hazard identification, avoidance, and control not standards. No attempt has been made to treat the topic exhaustively. It is essential that the student take the information presented in this training and apply it to his/her work operations and/or work activities to promote workplace safety and injury prevention. o Estimated length: 30 minutes o Audience: Workers in the General Industry o Given current OSHA and industry information regarding workplace illnesses, injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will be able to identify and protect themselves from unguarded machine and equipment hazards. o Specifically, the student will be able to: Identify major hazards associated with unguarded and inadequately guarded machines & equipment Describe types of hazards that exist with unguarded and inadequately guarded machines & equipment Protect themselves from unguarded and inadequately guarded machines & equipment hazards Recognize employer requirements to protect workers from exposure to unguarded machine hazards o References for this course include various sections of OSHA regulations found in 29 CFR Part 1910 and others that may be relevant to the presentation. o Injuries o Machine Areas o General Requirements o Motions and Actions o Safeguards o Guards o Devices o Saws / Presses / Plastics OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 11 OF 18
12 %20Safeguards OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 12 OF 18
13 Material Handling and Storage in General Industry o This course will cover several topics to include what employees should know before moving, handling, and storing materials, the potential hazards, precautions and safe work practices to include recommended lifting techniques. o Estimated length: 30 minutes o Audience: Employees, Supervisors, Managers o Given current OSHA and industry information regarding workplace illnesses, injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will be able to recognize hazards associated with material handling, storage, use and disposal. o Specifically, the student will be able to: Identify major hazards associated with material handling. Describe types of hazards associated with material handling. Protect themselves from hazards associated with material handling. Recognize employer requirements to protect workers from injury due to handling, storing, using and disposing of materials. Regulatory reference for this course is principally OSHA s, 29 CFR, Materials Handling and Storage. o Manual Handling of Materials o Conveyors o Powered Industrial Trucks o Cranes, Hoists and Slings o General Material Handling OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 13 OF 18
14 Personal Protective Equipment o Personal Protective Equipment, intended for workers in General Industry. Since workers are the target audience, this presentation emphasizes hazard identification, avoidance, and control not standards. No attempt has been made to treat the topic exhaustively. Estimated length: 1 hour o Audience: managers, superintendents, foreman, crew leaders, employers, and anyone with safety responsibilities. Given current OSHA and industry information regarding workplace illnesses, injuries and fatalities, and the OSHA requirements for protecting the health & safety of employees, the student will be able to determine, select and use proper Personal Protective Equipment.. o Specifically, the student will be able to: Describe types of hazards that require personal protective equipment Identify and select appropriate personal protective equipment Protect themselves from safety & health hazards by wearing personal protective equipment Recognize employer requirements to protect workers from exposure to hazards at all times o OSHA requirements, various sections of: 29 CFR 1910 (General Industry). American National Standards Institute (ANSI). National Institute of Occupational Safety and Health (NIOSH). Environmental Protection Agency (EPA). U.S. Coast Guard (USCG). o General PPE Program Issues o Head Protection o Eye / Face Protection o Arm and Hand Protection o Hearing Protection o Respiratory Protection o Body Protection o Fall Protection o High Visibility Apparel o Working Near or Over Water OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 14 OF 18
15 OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 15 OF 18
16 Safety & Health Programs o This course will cover basic elements of a Safety and Health Program and how the worker can adapt their knowledge to make a safer workplace. o Estimated length: 30 minutes o Audience: Workers in the General Industry Objective of this course is to provide training information so the student will be able to understand the significance of how an effective safety and health program can be in preventing illnesses, injuries and fatalities in general industry work environments. Specific educational objectives: o Major benefits associated with an effective Safety and Health Program. o Major elements included in an effective safety and health program. o o The intent of safety and health programs and how to improve them. Recognize employer requirements to provide for a safety and health program that effectively reduces and prevents employee injury, illness and fatalities. o Injury and Illness Prevention Program rule I2P2 o Information located at the following link: o Commitment / Involvement o Worksite Analysis o Hazard Prevention and Control o Safety and Health Training o Additional Program Elements OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 16 OF 18
17 Walking and Working Surfaces/Ladders o We ll be discussing the hazards, controls and requirements associated with walking and working surfaces. We will also discuss both fixed and portable ladders. o Estimated length: 1 hour o Audience: employees and supervisors o Identify major slip, trip and fall hazards o Describe types of slip, trip and fall hazards o Protect themselves from slip, trip and fall hazards o Recognize employer requirements to protect workers from slip, trip and fall hazards o Recognize the hazards and controls associated with all types of ladders (fixed and portable) o OSHA General Industry Standards, 29 CFR 1910, Subpart D, Walking and Working Surfaces. o Information from the OSHA Training Institute o General Requirements o Floor/Wall Openings and Holes o Stairway Railings and Guards o Fixed Industrial Stairs o Scaffolding o Mobile Work Platforms o Ladders o Portable Ladders o Fixed Ladders o Safe Work With Ladders o Other Working Surfaces o Employer Obligations OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 17 OF 18
18 ClickSafety.com, Inc. phone: N. California Blvd, Suite 425 fax: Walnut Creek, CA ClickSafety.com, Inc. All rights reserved. ClickSafety and the corporate logo are trademarks or registered trademarks of ClickSafety.com, Inc. in the United States. All other company and product names are used for identification purposes only and may be trademarks of their respective owners. ClickSafety.com, Inc. cannot guarantee completion of any future products or product features mentioned in this document, and no reliance should be placed on their availability. Printed in the U.S.A. OSHA 10 GENERAL INDUSTRY FACT SHEETS CLICKSAFETY.COM, INC. PAGE 18 OF 18
Written Programs Listing
Written Programs Listing Bloodborne Pathogens (BBP) (29CFR1910.1030) This standard requires that precautions be taken to prevent the transmission of bloodborne pathogens. Viruses and bacteria can be found
More informationSPECIALIZED ONLINE TRAINING COURSE LIST
SPECIALIZED ONLINE TRAINING COURSE LIST Grainger Online Safety Manager provides you with access to online training courses covering today's most relevant safety topics. The training content is designed
More informationOSHACAMPUS.com TM. powered by 360training. Course Catalog
Course Catalog General Industry Safety Product Catalog General Industry Courses: Advanced Advanced level courses are for Safety Managers and Compliance Officers. They are focused on the compliance aspects
More informationAuthorized Outreach Trainer Update. November 28, 2017
Authorized Outreach Trainer Update November 28, 2017 1 Breakdown of Topic Hours by Class Type 2 Link to Trainer Portal: https://outreachtrainer.gatech.edu/ Questions about using the website, submitting
More informationHAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING. Leader s Guide. ERI Safety Videos
2876 HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING Leader s Guide ERI Safety Videos HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader
More informationOn-Demand SAFETY Learning Library Catalog
On-Demand SAFETY Learning Library Catalog Click on the course title or scroll down to see each course description. To register, please contact Michelle Spitzer at P A S Associates (661) 631-2165 Michelle@PASassociates.com
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationSAFETY AND OSHA GUIDELINE CURRICULUM
SAFETY AND OSHA GUIDELINE CURRICULUM CertiLearn - Non-Industrial OSHA Safety Guidelines These courses are ideal for any small business or non-industrial environment Safety Basics In this course you will
More informationA Different Sort Of Knowledge Box
The Oil & Gas Safety Library contains courses addressing Federally Mandated Training, including topics such as: Emergency Response Powered Industrial Equipment Environmental Product/Process Standards Hazard
More informationMAKE THE WORKPLACE SAFER Maintenance Staff
MAKE THE WORKPLACE SAFER Maintenance Staff Three Steps to a Safer Workplace Active observation and follow-up will go a long way toward making your workplace safer. Follow these three steps: 1. Identify
More informationA Health and Safety Tip Sheet for School Maintenance Staff. Did you know? Step 1. Identify job hazards. Step 2. Work towards solutions
INSPECTION Health and CHECKLIST Safety Committees MAINTAINING SAFETY: A Health and Safety Tip Sheet for School Maintenance Staff 1 Maintenance and facilities staff members keep schools operational, safe,
More informationOSHA Federal Standards October 1, 2016 September 30, 2017
OSHA Federal Standards October 1, 2016 September 30, 2017 29 CFR 1926 SUBPARTS 29 CFR 1926. C M L L E M M E X M MOST FREQUENTLY CITED SERIOUS VIOLATIONS IN CONSTRUCTION 2017.501(b)(13) FALL PROTECTION
More informationHazard Recognition. Leader s Guide and Quiz
Hazard Recognition Leader s Guide and Quiz 4831 INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order so that employees will see the relationships
More informationStaffing Services Client Evaluation Form
Staffing Services Client Evaluation Form Client Name: Location: Contact(s): Completed By: A Safety Performance Experience Modification Factor? OSHA 300 Logs Available? # Of Injuries/Illnesses? Types of
More informationOmega Safety Training, Inc Hwy 6 North, Ste. 207 Houston, Texas Ph:
Omega Safety Training, Inc. 4654 Hwy 6 North, Ste. 207 Houston, Texas 77084 Ph: 281-979-4849 Email: Chad@omegasafetytraining.com Training Syllabus: P.E.C. 24 Hour Core Compliance SafeLand USA & SafeGulf
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationSAFETY POLICY AND PROCEDURE MANUAL QUESTIONNAIRE
The following questionnaire is designed to aid us in the creation of your policy and procedure manual. Please place a checkmark in the boxes that correspond to the sections that you would like to be included
More informationCommitted to Providing Quality Safety Products and Services. Online Training
Online Training Don t let a lack of time keep you from making your company a safe place to work. Arbill has designed our online education program to be as flexible as you need it to be, allowing you to
More informationCarter Healthcare, Inc
Training Requirements for the Revised Hazard Communication Standard December 1st, 2013 Questions and Answers Q. What is the Globally Harmonized System? A. The Globally Harmonized System (GHS) is an international
More informationOSHA 30 Syllabus. Laborers Training School. Time: 40 hours. Maximum Class Size: 30. Prerequisites: None
Time: 40 hours Maximum Class Size: 30 Prerequisites: None Course Description: The 40-hour OSHA Outreach Training Program provides training for workers and employers on the recognition, avoidance, abatement,
More informationAuthorized Outreach Trainer Update. July 10, 2014
Authorized Outreach Trainer Update July 10, 2014 1 If you have questions during the webinar, use the Chat. Your questions will either be answered during the webinar, if time allows, or will be answered
More informationAccident Investigation and Hazard Analysis
Accident Investigation and Hazard Analysis June 18, 2015 Objectives: Accident Investigation Define accidents Review why accident investigations are important Review the purpose of accident investigations
More informationConducting An Effective. Welcome!
Conducting An Effective An introduction to the Five Step Process of Job Hazard Analysis JHA-JSA-SWMS-AHA Introductions Welcome! What do you know about Job Hazard Analysis (JHA s)? Does OSHA require JHA
More informationBRIT TEAM PLATEFORM Training Module List
BRIT TEAM PLATEFORM Training Module List Fleet Safety Accident Scene Management Every day, drivers are involved in motor vehicle emergencies and accidents. The goal of this training program is to instruct
More informationWEBINARS. Hazard Communication
WEBINARS Hazard Communication Teaches employees the safe use and handling of hazardous chemicals in the workplace and how to protect themselves and others from those hazards. The modified standard provides
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationModule: Permit to work System
Module: Permit to work System Aim: To know about best practice of PTW. It is a procedure designed to ensure that work is carried out in the safest possible way by considering the potential hazards and
More informationConfined Space Entry
Confined Space Entry Purpose The purpose of this document is to establish methods to identify confined spaces, classify them according to their risks, and establish guidelines necessary for the safe preparation,
More informationCorporation for Ohio Appalachian Development Corporation for Ohio Appalachian. Confined Space Awareness
Corporation for Ohio Appalachian Development Confined Space Awareness Kevin McCoy kmccoy@coadinc.org Scott Kashuba scott.kashuba@development.ohio.gov Special Dangers of Confined Spaces Confined Space-
More informationOSHA Compliance Saves Money, See How They Are Connected. Ryan S. Hellman, MS Principal EHS Consultant
OSHA Compliance Saves Money, See How They Are Connected Ryan S. Hellman, MS Principal EHS Consultant Why Safety? OSHA Regulations Approximately 50 individual OSHA General & Construction Industry Standards
More informationRequired Courses. Total Hours 39
Public Sector Safety & Health Fundamentals Certificate Program for Construction Participants must complete a minimum of seven courses, comprised of required and elective courses, that include a minimum
More informationChemicals, ranging from water to acid, can be found just about everywhere. Some chemicals are more harmful than others. You must be aware of chemical hazards at all times, especially at work. At work,
More informationHealth and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
More informationHAZARD RECOGNITION EVALUATION & CONTROL. Procedure No. HR-405-PR-2 Division Human Resources. Supersedes n/a Board Policy Ref.
COLLEGE OF THE NORTH ATLANTIC OPERATIONAL PROCEDURE TOPIC: HAZARD RECOGNITION EVALUATION & CONTROL Procedure No. Division Human Resources Supersedes n/a Board Policy Ref. GP-GR-805 Related Policy HR-405
More informationElectrical Safety Work Practices
Work Practices I. SCOPE This program covers any SOUTHWESTERN COMMUNITY COLLEGE employee that may work or be exposed to exposed electrical systems: To assure that employees are not exposed to potentially
More informationSAFETY STREAMING VIDEO CATALOG
SAFETY STREAMING VIDEO CATALOG November 2014 brickstreet.com 1.866.452.7425 TM Back Safety for Material Handlers Injuries strike more than one million workers every year, resulting in lost time, wages
More informationWORKPLACE SAFETY INSPECTIONS TABLE OF CONTENTS INTRODUCTION...2 OBJECTIVE...2 REFERENCES...2 PREREQUISITES...2 PRECAUTIONS...2 CHECKLISTS...
REVISION 0 PAGE 1 OF 8 TABLE OF CONTENTS SECTION PAGE INTRODUCTION...2 OBJECTIVE...2 REFERENCES...2 PREREQUISITES...2 PRECAUTIONS...2 CHECKLISTS...2 PROCEDURE...3 Responsibilities...3 Work Area Safety
More informationConfined Space Entry
Confined Space Entry Purpose The purpose of this chapter is to establish methods to identify confined spaces, classify them according to their risks, and establish guidelines necessary for the safe preparation,
More informationFAQs: Confined Spaces in Residential Construction
Provided by Marshall & Sterling, Inc. FAQs: Confined Spaces in Residential Construction A new standard for construction work in confined spaces became effective Aug. 3, 3015. The new standard (Subpart
More informationRecommended Facilitator Notes: (read the following text out-loud to participants while showing this slide)
Slide 1 Confined Space Entry for General Industry These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The program is being
More informationDo you have a written, effective Injury and Illness Prevention Program (IIPP)? Does everyone know who is responsible for the IIPP in the worksite?
HEALTH HAZARD AND ASSESSMENT SAFETY COMMITTEES CHECKLIST HAZARD ASSESSMENT CHECKLIST AG TOOL 2 1 Sample Safety Inspection Checklist Workplace: Date: Inspected by: Each No answer may indicate a problem.
More informationNew Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
More informationInjury and Illness Prevention Program
has established an (IIPP) designed to provide a safe and hazard-free environment for all employees, clients and visitors. This program is administered and maintained by s Risk Management Department. A
More informationMid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center
Mid-Del Technology Center s Health, Safety & Environmental (HS&E) Training Center Mid-Del Technology Center provides a wide variety of customized safety and health training. This training can be conducted
More informationMeet Today s Webinar Team
Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in
More informationReducing Exposures From Confined Space Entry
Reducing Exposures From Confined Space Entry Over 1.6 million Americans work in Confined Spaces each year, and each year many accidents occur. Many of these accidents lead to serious injury or death from
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationPreventive Maintenance
A Health and Safety Guideline for Your Workplace Why? Preventive maintenance is predetermined work performed to a schedule with the aim of preventing the wear and tear or sudden failure of equipment components.
More informationLEGISLATIVE DEVELOPMENTS IMPACTING PETROLEUM CONTRACTORS
LEGISLATIVE DEVELOPMENTS IMPACTING PETROLEUM CONTRACTORS John W. Aird Workplace Safety & Prevention Services Ontario Petroleum Contractors Association March 8, 2016 Regulations Impacting your Businesses
More informationRISK CONTROL SOLUTIONS
RISK CONTROL SOLUTIONS A Service of the Michigan Municipal League Liability and Property Pool and the Michigan Municipal League Workers Compensation Fund REDUCING EXPOSURES FROM CONFINED SPACE ENTRY Over
More informationCedarville University Employee Safety & Security Orientation
Cedarville University Employee Safety & Security Orientation Campus Security Related Issues: The Campus Safety & Security Department manages matters pertaining to security, safety, fire safety & prevention,
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationRespiratory Protection
Respiratory Protection Purpose The purpose is to establish a set of guidelines for the selection of respiratory protection equipment, situations for its use, and training in the use of the respirator required.
More information"CONFINED SPACE ENTRY"
PRESENTER'S GUIDE "CONFINED SPACE ENTRY" Training for THE OSHA PERMIT-REQUIRED CONFINED SPACES STANDARDS "Quality Safety and Health Products, for Today...and Tomorrow" OUTLINE OF MAJOR PROGRAM POINTS OUTLINE
More informationElements of a Lockout/Tagout Program OSHA
September 15, 2015 Elements of a Lockout/Tagout Program OSHA 1910.147 Dayna Noble Industrial Safety Consultant Specialist Ohio BWC 567-204-8917 Dayna.noble@bwc.state.oh.us Top 10 most frequently cited
More informationB&B Gas Well Services, LLC HEALTH, SAFETY AND ENVRONMENTAL MANUAL HAZARD COMMUNICATION PROGRAM
B&B Gas Well Services, LLC HEALTH, SAFETY AND ENVRONMENTAL MANUAL HAZARD COMMUNICATION PROGRAM 1 HAZARD COMMUNICATION PROGRAM Table of Contents Topic Page 1.0 Objective 3 2.0 Scope 3 3.0 References 3 4.0
More informationScope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such activities.
11/13/1995 4 5/20/2013 1 of 10 Authority and Scope Regulation: 29 CFR 1910.146 Scope: This plan applies to all personnel, including contractors, who enter or work in confined spaces, or supervise such
More informationHazard Communication Program. San José State University
San José State University One Washington Square San José, California Facilities Development and Operations Department July 11, 2012 Page intentionally left blank SJSU_Hazard Communication Program_2012-0711.docx
More information9/7/2018. Introduction to the. Presenter. Disclaimer ADD PRESENTER PHOTO HERE. Richard A. Lantz, CVI, ASCS, VSMR
New Manual Copyright 2018, All Rights Reserved No part of this publication may be reproduced or distributed by any means, electronic or mechanical, including photocopy, recording, or any other information
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More information10-Hour OSHA Training
Designated Training Topics 10-Hour OSHA Training This training program is intended to provide entry level construction workers information about their rights, employer responsibilities, and how to file
More informationONONDAGA COUNTY HEALTH DEPARTMENT Annual Training Hazard Communication Right to Know
ONONDAGA COUNTY HEALTH DEPARTMENT 2012 Annual Training Hazard Communication Right to Know HAZARD COMMUNICATION/ RIGHT TO KNOW STANDARD All employees should have information about any hazards from chemicals
More informationSafety Services Guidance. Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER)
Guidance on: The Provision and Use of Work Equipment Regulations 1998 (PUWER) Key word(s) : Work equipment. Using, maintaining and repairing. Information, instruction and supervision. Risk Assessment.
More informationWalking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
More informationSafety Manual Section 6 Confined Space
6. CONFINED SPACE ENTRY Introduction The following sections provide general guidelines and procedures for confined space entry. This section covers the following topics: Topic Page 6.1 Types of s... 6-2
More informationA MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
More informationMATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET PRODUCT: Paste REVISION DATE: 03/09/2009 REVISION NUMBER: 2 Date Printed: 03/09/2009 1. PRODUCT AND COMPANY IDENTIFICATION MANUFACTURED BY: Ferro Corporation 251 West Wylie Avenue
More informationState University of New York College at Oneonta
State University of New York College at Oneonta CONFINED SPACE ENTRY POLICY - PROCEDURE REVIEWED 05/11/17 CONFINED SPACE ENTRY - WRITTEN PLAN POLICY The State University College at Oneonta is committed
More informationEffective Date: 26, October 2016 TITLE: COLOR CODING AND ACCIDENT PREVENTION SIGNS AND TAGS GUIDELINES
Version: 2 Page: 1 of 5 1.0 Introduction 1.1 Purpose The purpose of this guideline is to communicate information and to establish a method for marking physical hazards. 1.2 Scope This guideline is intended
More informationLONE WORKING HEALTH AND SAFETY GUIDANCE
LONE WORKING HEALTH AND SAFETY GUIDANCE Revised March 2017: Version 3.1 Name of Policy: Purpose of the Policy: Policy Applies to: Approved by: Responsible for its Updating: Final Approval by: Lone Working
More informationNPGA White Paper. OSHA Hazard Communication Standard
I. INTRODUCTION NPGA White Paper OSHA Hazard Communication Standard The purpose of this white paper is to describe the changes to the Occupational Safety and Health Administration (OSHA) Hazard Communication
More informatione-compliance Training
e-compliance Training A Hazard Communication - October 2018 In 2012, OSHA modified the Hazard Communication Standard significantly. This was done to adopt the internationally used Globally Harmonized System
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationHazard Communication Plan (HCP) 29 CFR
Hazard Communication Plan (HCP) 29 CFR 1910.1200 METHODIST UNIVERSITY Environmental Health and Safety Office Hazard Communication Plan (HCP) 1910.1200 OSHA Hazard Communication Revision 3 May 2018 Estimated
More informationSlips, Trips and Falls
This document is intended to provide basic safety guidelines for the Physical Plant Department at Community College of Allegheny County. The information provided in this guide may vary by site. Version
More informationExposure Control Plan for Drilling/Grinding Concrete
Exposure Control Plan for Drilling/Grinding Concrete Drilling or grinding into concrete without proper dust controls can generate high levels of silica-containing dust. Breathing in this fine dust can
More informationBasic Safety Orientation. University of Illinois at Urbana-Champaign
Basic Safety Orientation Basic Safety Orientation This orientation is General Knowledge only. Further training is required to meet hazard specific training requirements. For more information, please contact
More informationEscondido Union High School District. Hazard Communication Plan
Escondido Union High School District Hazard Communication Plan Updated June 2017 Table of Contents Introduction. 2 Globally Harmonized System (GHS). 2 Hazardous Substance Inventory. 3 Safety Data Sheets
More informationCONFINED SPACE PROGRAM
CONFINED SPACE PROGRAM A confined space, as defined in 29 CFR 1910.146: Is large enough and so configured that an employee can bodily enter and perform assigned work AND Has limited or restricted means
More informationMSDS: Polypropylene Copolymer Talc Filled
Section 1 MSDS: Polypropylene Copolymer Talc Filled Dynamic Polymer Solutions Telephone Numbers: (810) 324-1451 Chemtrec - Transportation Emergency: (800) 424-9300 MATERIAL IDENTIFICATION PRODUCT NAME:
More informationCONFINED SPACE ENTRY
CONFINED SPACE ENTRY Background On May 4, 2015, OSHA issued a new standard for construction work in confined spaces The rule became effective on August 3, 2015 29 CFT 1926 Subpart AA Prior to the rule
More informationIndustry Code: Alberta Small Employer OHS Legislated Requirements
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Services in this industry can
More informationProcess Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR
Process Safety Management Of Highly Hazardous Chemicals OSHA 29 CFR 1910.119 PSM - Definition Not all refining hazards are caused by the same factors or involve ve the same degree of potential damage.
More informationHazard Communication Awareness Training Your right to know!
Hazard Communication Awareness Training Your right to know! OSHA - employee safety - hazard communication - 29 CFR 1910.1200 EPA - environmental safety DOT - transportation safety - shipping & receiving
More informationHazard Communications Program Policy
Hazard Communications Program Policy 1. General The purpose of this instruction is to ensure that the Geneva Public Library is in compliance with the OSHA Hazard Communication Standard (HCS) 29 CFR 1910.1200.
More informationTHE TLC COMPANIES. Self Inspection Program. Self Inspection. Program. Revised 12/13/2002 DC00026
THE TLC COMPANIES Self Inspection Program Self Inspection Program Table of Contents SECTION 1 INSPECTION REQUIREMENTS 1 Informal Inspection 1 General Inspection 1 SECTION 3 CONDUCTING INSPECTIONS 5 Preparation
More informationNew Employee Safety Orientation
New Employee Safety Orientation Introduction Colleges are relatively safe places to work. However, workplace hazards do exist. Siena College, along with the NYC&URMG and., have created this New Employee
More informationSection 4. Fundamentals of Accident/Incident Prevention. Accidents/Incidents are Preventable
Fundamentals of Accident/Incident Prevention Accidents/Incidents are Preventable Many people believe that accidents are the inevitable result of unchangeable circumstances, fate, or a matter of bad luck.
More informationJames J Arendas Ph.D.
James J Arendas Ph.D. Safety Program Elements Management Commitment Hazard Identification Hazard Correction Training Hazard Identification Qualified and Competent Persons Identify Hazards in the Workplace
More informationIndustrial Relations
Industrial & Management Engineering Department Industrial Relations IM 111 Dr Yehia Youssef IM111 Lecture 7 1 Definitions Hazard: A hazard is anything that can cause harm to people. Examples are dangerous
More informationFall Protection for General Industry and Construction. Josh Flesher Assistant Regional Administrator for Cooperative and State Programs
Fall Protection for General Industry and Construction Josh Flesher Assistant Regional Administrator for Cooperative and State Programs Workplace Injuries, Illnesses and Fatalities 4,585 workers were killed
More informationWalking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
More informationCONSTRUCTION SAFETY PROGRAM FOR. Golder Acoustics Inc.
CONSTRUCTION SAFETY PROGRAM FOR Golder Acoustics Inc. TABLE OF CONTENTS Topic... Page Safety and Health Policy... 2 Safety and Health Objectives... 3 Job Site Inspections... 4 Contractor Safety Administrator...
More informationPurpose Written Program Hazard Classifications (GHS) SDS Sheets (GHS) Labels (GHS) Employee Training Chemical Safety Questions
Purpose Written Program Hazard Classifications (GHS) SDS Sheets (GHS) Labels (GHS) Employee Training Chemical Safety Questions Rights Reserved. 2 Purpose: Ensure that the hazards of all chemicals produced
More informationDEPARTMENT SCHOOLS OF HEALTH. respiratory protection. Proper adherence to bloodborne pathogen handling protocols.
ANIMAL WORK: Work in laboratories, procedure rooms, surgery rooms and animal housing facilities containing animals. Refer to specific Animal Care Protocols. All lab workers who work in a lab conducting
More informationSafe work method statements
Information about Safe work method statements How to prepare and use a safe work method statement (SWMS) for high risk construction work (HRCW) and who needs to prepare one. October 2018 Key concepts Hazard
More informationSafety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE
SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE Preventing injuries in the workplace is a primary consideration for Millard. An orientation program has been developed to introduce employees to the warehousing
More informationWorking Alone Safety Program
Facilities Operations and Development Environmental Health and Safety 1314 Kinnear Road #106 Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404 Fax www.ehs.osu.edu Working Alone Safety Program Prepared
More informationConfined Space Entry - General Industry & Construction. Leader s Guide and Quiz
4470 Confined Space Entry - General Industry & Construction Leader s Guide and Quiz INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order,
More informationLock Out Tag Out Globally Harmonized System of Chemical Labeling Globally Harmonized System of Safety Data Sheets
Lock Out Tag Out Globally Harmonized System of Chemical Labeling Globally Harmonized System of Safety Data Sheets A lock or a tag is placed on the equipment in a position that prohibits it from being turned
More information