SB 152. Spare parts list. Hydraulic breakers. SB 152 s/n BES Construction Tools PC AB No

Transcription

1 SB 152 Spare parts list Hydraulic breakers SB 152 s/n BES Construction Tools PC AB No

2 General information This spare parts list applies to the following: Part number SB 152 Description Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Kits and consumables 1 Spare parts list Spare parts list 3 Optional parts - Bushing oversize, complete 6 Optional parts - Restrictor, complete 9 Tightening torque Tightening torque 11 Working tools Working tools SB Accessories Optional equipment 15 Hydraulic hoses 17 Kits Label kit 19 Seal kit 21 Lower hammer part kit 23 Accumulator repair kit 25 Dimensions Dimensions (mm) 27

4 Kits and consumables 1

5 Item Part No. Name Qty L Chisel paste cartridge for grease gun, 12 x 400 g (0.88 lbs) Chisel paste cartridge, 150 g x 12, 0.33 lb x Stop ring Lock buffer Lock pin Retainer bar Bushing standard, complete Label kit Start-Up Kit Blunt Start-Up Kit Chisel (cross) Start-Up Kit Chisel (X-Profile) Start-Up Kit Moil point Start-Up Kit Moil point (X-Profile) Start-Up Kit Plus Accumulator repair kit Lower hammer part kit Seal kit 1 2

6 Spare parts list Spare parts list 3

7 Item Part No. Name Qty L 1 - Breaker body Bushing standard, complete 1 A 3 -- Bushing, ø75 mm, ø2.95 in Scraper ring O-ring, 64.5 x 3 mm (90 shore), 2.53 x 0.12 in Stop ring Plug, Ø10 mm, Ø0.39 in Hex. sock. plug 6 B Water Nossle Lock pin Spring pin, option Retainer bar Lock buffer Plug, VSTI R ED 4 C Coil spring Diaphragm support Diaphragm Accumulator house Hexagon socket screw, Screw with extra high fatigue strength. 8 D Plug VSTI R 1 8-ED 1 E Seal, SRC 8 x 14 x 2.4 mm O-ring 13.3 x 2.4 mm (70 shore), 0.52 x 0.09 in Charge valve O-ring 7.3 x 2.4 mm (70 shore), 0.28 x 0.09 in Parallel pin D4 x 25 mm, D4 x 0.98 in Nipple, complete 1 F Nipple Seal ring O-ring, x 1.78 mm0.49 x 0.07 in. (90 shore) Cap Valve cover O-ring, x 3 mm, 1.23 x 0.12 in Control valve Seal, SCR 10 x 16 x 2.4 mm Plug Pressure relief valve, complete Pressure relief valve O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) 1 4

8 Item Part No. Name Qty L O-ring, x 1.78 mm, 0.43 x 0.07 in. (90 shore) Restrictor standard, complete 1 G O-ring, x 1.78 mm, 0.43 x 0.07 in. (90 shore) O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) Restrictor, ø5.1 mm, ø0.20 in Grease nipple, ISO 7-R 1/4 1 H Wiper Piston rod seal O-ring, 86 x 3 mm (90 shore), 3.39 x 0.12 in O-ring, x 1.78 mm (90 shore), 3.49 x 0.07 in Liner O-ring, 84.5 x 3 mm (90 shore), 3.33 x 0.12 in Piston Piston rod seal Back head Check valve, complete Check valve Valve rubber Bolt Base plate with through borings Bolt kit Screw, M16 x 75 mm 8.8 fzb Nut, M16 8 Comments for Page: Spare parts list (L)OCAL REMARKS A For more bushings, see section "Bushing oversize, complete". B VSTI R 1/4 - ED C VSTI R 3/8 - ED D Screw with extra high fatigue strength. E VSTI R 1/8 - ED F There are two "Nipple, complete" on the machine. G Formore restrictors, see section "Restrictor, complete". H ISO 7-R 1/4 5

9 This page intentionally left blank 6

10 Spare parts list Optional parts - Bushing oversize, complete 7

11 Item Part No. Name Qty L Bushing oversize, complete Bushing, Ø76.5 mm, Ø3.01 in Scraper ring O RING Bushing oversize, complete Bushing, Ø78 mm, Ø3.07 in Scraper ring O RING 4 8

12 Spare parts list Optional parts - Restrictor, complete 9

13 Item Part No. Name Qty L Restrictor, complete O-ring, x 1.78 mm, 0.43 x 0.07 in O-ring, 15.6 x 1.78 mm, 0.61 x 0.07 in Restrictor, Ø4.5 mm, Ø0.18 in Restrictor, complete O-ring, x 1.78 mm, 0.43 x 0.07 in O-ring, x 1.78 mm, 0.43 x 0.07 in O-ring, 15.6 x 1.78 mm, 0.61 x 0.07 in O-ring, 15.6 x 1.78 mm, 0.61 x 0.07 in Restrictor, Ø4.0 mm, Ø0.16 in. 1 10

14 Tightening torque Tightening torque 11

15 Item Part No. Name Qty L 8 - Hexagon socket plug - 30 Nm - A 14 - Hexagon socket plug - 80 Nm - B 19 - Hexagon socket screw Nm - C 20 - Hexagon socket plug - 20 Nm Charge valve - 20 Nm Nipple Nm Pressure relief valve - 80 Nm Restrictor - 80 Nm Grease nipple - 30 Nm Check valve - 30 Nm - D 57 - Hexagon head screw Nm - E 61 - Nut Nm - 12

16 Working tools Working tools SB

17 Item Part No. Name Qty L Moil point Moil point Moil point (X-profile) Chisel (cross) Chisel (cross) Chisel (X-profile) Blunt tool Wide chisel Wide chisel indexed 90º Asphalt cutter Asphalt cutter indexed 90º Shaft Tamping pad (square) Post driver pad (round) Pile driver pad (round) Bushing pad (round) 1 14

18 Accessories Optional equipment 15

19 Item Part No. Name Qty L Grease gun for 400 g cartridge Chisel paste cartridge for grease gun, 12 x 400 g (0.88 lbs) Chisel paste container (15 kg) Chisel paste container (45 kg) Filling device for accumulator Nipple, for charging the accumulator Filling hose for charging the accumulator Bushing wear controller 1 16

20 Accessories Hydraulic hoses 17

21 Item Part No. Name Qty L Hose, both ends 18 L(M26 x 1.5) length 1500 mm Hose, both ends 18 L(M26 x 1.5) length 2000 mm Hose, both ends 18 L(M26 x 1.5) length 2400 mm Additional fitting kit 1 A 18

22 Kits Label kit 19

23 Item Part No. Name Qty L Label kit Sound power label Product label 2 A 4 -- Safety label AEM sign Safety label 1 Comments for Page: Label kit (L)OCAL REMARKS A "SB 152" 20

24 Parts Online SB 152 s/n BES Kits Seal kit 21

25 Item Part No. Name Qty L Seal kit Scraper ring O-ring, 64.5 x 3 mm (90 shore), 2.53 x 0.12 in Seal washer Seal, SRC 8 x 14 x 2.4 mm O-ring 13.3 x 2.4 mm (70 shore), 0.52 x 0.09 in O-ring 7.3 x 2.4 mm (70 shore), 0.28 x 0.09 in Seal ring O-ring, x 1.78 mm0.49 x 0.07 in. (90 shore) O-ring, 31.2 x 3 mm, 1.23 x 0.12 in. (90 shore) Seal, SCR 10 x 16 x 2.4 mm O-ring, 15.6 x 1.78, 0.62 x 0.07 in. (90 shore) O-ring, x 1.78 mm, 0.43 x 0.07 in. (90 shore) Wiper Piston rod seal O-ring, 84.5 x 3 mm (90 shore), 3.33 x 0.12 in Piston rod seal O-ring, 86 x 3 mm (90 shore), 3.39 x 0.12 in Valve rubber O-ring, x 3 mm, 1.23 x 0.12 in O-ring, x 1.78 mm (90 shore), 3.49 x 0.07 in Plug 1 22

26 Kits Lower hammer part kit 23

27 Item Part No. Name Qty L Lower hammer part kit Bushing, complete Bushing Scraper ring O-ring, 64.5 x 3 mm (90 shore), 2.53 x 0.12 in Stop ring Lock pin Retainer bar Lock buffer Chisel paste cartridge 1 A 24

28 Kits Accumulator repair kit 25

29 Item Part No. Name Qty L Accumulator repair kit Coil spring Diaphragm support Diaphragm Hexagon socket screw, Screw with extra high fatigue strength. 8 A Plug VSTI R 1 8-ED 1 B Seal, SRC 8 x 14 x 2.4 mm O-ring 13.3 x 2.4 mm (70 shore), 0.52 x 0.09 in Charge valve O-ring 7.3 x 2.4 mm (70 shore), 0.28 x 0.09 in Parallel pin D4 x 25 mm, D4 x 0.98 in. 1 26

30 Dimensions Dimensions (mm) 27

31

32 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. epiroc.com