PRESSURE REDUCING (AND CHECK) VALVES RT/RG RCT/RCG. -03/06/10 (3/8, 3/4, 1-1/4) Threaded Connections / Sub-plate Mounting
|
|
- Eric George
- 5 years ago
- Views:
Transcription
1 REDUING (ND HEK) VLVES RT/RG RT/RG -3// (3/8, 3/, -/) Threaded onnections / Mounting Up to MPa (5 PSI), 5 L /m in (3 U.S.GPM) Pub. E-3 Pressure Reducing Valves Pressure reducing valves are used to set the pressure of a hydraulic circuit below that of the main circuit. In addition, operation under remote control is possible by using the remote control port. Pressure Reducing and heck Valves Pressure reducing and check valves are used to set the pressure of a hydraulic circuit below that of the main circuit. They have check valves, which allow a free flow from the secondary side to the primary. Operation under remote control is also possible by using the remote control port. Hydraulic Fluids Fluid Types ny type of hydraulic fluid listed in the table below can be used. Petroleum base oils Use fluids equivalent to ISO VG 3 or VG. Synthetic fluids Use phosphate ester or polyol ester fluid. When phosphate ester fluid is used, prefix "F-" to the model number because the special seals (fluororubber) are required to be used. Water containing fluids Use water-glycol fluid. Note: For use with hy draulic fluids other than those listed above, please consult y our Yuken representatives in advance. Recommended Viscosity and Oil Temperatures Viscosity ranging between 5 - mm /s (77-8 SSU). Oil temperatures between -5/+7 (5-58 F). Use hydraulic fluids which satisfy the recommended viscosity and oil temperatures given above. ontrol of ontamination Due caution must be paid to maintaining control over contamination of the hydraulic fluids which may otherwise lead to breakdowns and shorten the life of the valves. Please maintain the degree of contamination within NS 38- Grade. Use 5 µm or finer line filter. No.
2 Specifications Valve Name Pressure Reducing Valve Pressure Reducing and heck Valve Threaded onnection RT-3- - RT-- - RT-- - Mounting RG-3- - RG-- - RG-- - RT-3- - RG-3- - RT-- - RG-- - RT-- - RG-- - Pressure Reducing (and heck) Valves RT/RG RT/RG -3// Specifications / Model Number Designation Max. Operating Pressure MPa (PSI) (5) (5) (5) (5) (5) (5) Max. Flow Setting Pressure MPa (PSI).7 -. ( - ). -.5 ( - 97).7 -. ( - ). -.5 ( - ) ( - 97).7 -. ( - ). -.5 ( - ) ( - 5) ( 5-97).7 -. ( - ). -.5 ( - 97).7 -. ( - ). -.5 ( - ) ( - 97).7 -. ( - ). -.5 ( - ) ( - 5) ( 5-97). The max. flow rates are those shown at the primary pressure at MPa (5 PSI).. The drain flow rates are equal to pilot flow rates when differential pressure between primary and secondary pressure is at.5 MPa (97 PSI). Max. Flow L/min (U.S.GPM) (.) 5 (3.) 5 (3.) (.) 5 (33.) (3.3) 8 (7.5) (58.) 5 (.) (.) 5 (3.) 5 (3.) (.) 5 (33.) (3.3) 8 (7.5) (58.) 5 (.) Drain Flow L/min (U.S.GPM).8 -. (. -.).8 -. (. -.9). -.5 (.3 -.).8 -. (. -.).8 -. (. -.9). -.5 (.3 -.) Threaded onnection pprox. Mass kg (lbs.).3 ( 9.5).9 ( 5.). (.5).8 (.) 7.8 ( 7.) 3.8 (.) Graphic Symbols RT / RG Mounting.5 ( 9.9).8 ( 5.). (.3) 5. (.9) 8. (7.9) 3.8 (.) Yuken can offer flanged connection valves described below. For details, contact us. RF/RF-- - RF/RF-- - Max. Operating Pressure MPa (PSI) (5) Max. Flow L/min (U.S.GPM) 5 () 5 (3) Remote control connection RT / RG Remote control connection Model Number Designation F- R Special Seals F: Special Seals for Phosphate Ester Type Fluids (Om it if not required) Series Number R: Pressure Reducing Valves R: Pressure Reducing and heck Valves T Ty pe of Mounting T: Threaded onnection G: Mounting T: Threaded onnection G: Mounting -3 -B Valve Size Pres. dj. Range MPa (PSI) B:.7-7 (-) : 3.5- (5-) H: 7-.5 (-97) - Design Number Design Standards None: Japanese Std. "JIS" 8 : European Design Std. 9 : N.merican Design Std. None: Japanese Std. "JIS" 8 : European Design Std. 9 : N.merican Design Std. No.
3 Pressure Reducing (and heck) Valves RT/RG RT/RG -3// ttachment / / Instructions ttachment Mounting bolts Valve Model Numbers RG-3 RG- RG- RG-3 RG- RG- Socket Head ap Screw Japanese Std. "JIS" and European Design Std. M 5 Lg. M 5 Lg. M 5 Lg. M 7 Lg. M 8 Lg. M 9 Lg. N. merican Design Std. 3/8- UN Lg. 3/8- UN Lg. 3/8- UN Lg. 3/8- UN -3/ Lg. 3/8- UN 3-/ Lg. 3/8- UN 3-/ Lg. Qty. Valve Model Numbers RG RG -3 RG RG - RG RG - Japanese Standard "JIS" HGM-3- HGM-3X- HGM-- HGM-X- HGM-- HGM-X- Thread Size Rc 3/8 Rc / Rc 3/ Rc Rc -/ Rc -/ European Design Standard HGM-3-8 HGM-3X-8 HGM--8 HGM-X-8 HGM--8 HGM-X-8 Thread Size 3/8 BSP.F / BSP.F 3/ BSP.F BSP.F -/ BSP.F -/ BSP.F N. merican Design Standard HGM-3-9 HGM-3X-9 HGM--9 HGM-X-9 HGM--9 HGM-X-9 Thread Size 3/8 NPT / NPT 3/ NPT NPT - -/ NPT pprox. Mass kg (lbs.). (3.5). (5.3) 3. (.).8 (.) 5.7 (.) s are available. Specify the sub-plate model number from the table above. When sub-plates are not used, the mounting surface should have a good machined finish. Instructions To adjust the pressure, loosen the lock nut and turn the pressure adjustment handle slowly clockwise for higher pressures and anti-clockwise for lower pressures. fter adjustments, do not forget to tighten the lock nut. onnect the drain port directly to the tank in which case the pressure at the drain port should be kept at a low back pressure close to the atmospheric pressure. There are two threaded connection type primary pressure ports. They can be connected each other in-line; one as an inlet and the other as an outlet or the valve can be used by plugging one of the pressure ports. No.3
4 RT-3- -/8/9 Pressure Reducing Valves RT-3// (.39) Fully Extended 8(5.83) RT-3- RT-3- - RT "" Thd. Rc 3/8 3/8 BSP.F 3/8 NPT / BSP.F / BSP.Tr (.) Design "8" Only "" Thd. 33 (.) (.) 8 (3.3) Remote ontrol Port.5 (.8) 5 (.) (.77) Pressure dj. IN. 8 (.) 8 (.89) 55 (.) (.73) (.55) Hex. 85 (3.35) "" Thd. Outlet Port 3 (.) Inlet Port RT- - -/8/9 Design "8" Only B 8.5 (.73) B Fully Extended "D" Remote ontrol Port "S" Thd..5 (.8) RT-- RT-- - RT-- -8 RT-- -9 RT-- - RT "S" Thd. MILLIMETRES (INHES) "Q" Thd. "S" Thd. "T" Thd. Rc 3/ 3/ BSP.F 3/ NPT Rc -/ -/ BSP.F - / BSP.F / BSP.F / BSP.Tr / BSP.Tr Pressure dj. IN. "T" Thd. H L J (.77) E K F (.55) Hex. "T" Thd. Outlet Port "Q" Thd. N Inlet Port "Q" Thd. RT- RT- 9 (3.78) 3 (5.) Dimensions mm (Inches) B D E F H J K L N 8 (.89) (.) 3.5 (.) 3 (.9) 9 (5.87) 7 (.57) (.5) 5 (.5) 79 (7.5) (8.5) 97.5 (3.8) (.88) 53.5 (.) (.5) 33 (.) (.57) 9 (.35) (.7) 39 (.5) (.8) No.
5 RG /8/9 Remote ontrol Port "L" Thd. Mounting Surface (s Furnished) D B 39 (.5) Fully Extended "" Pressure Reducing Valves RG-3// (.77) (.55) Hex. Design "8" Only.5 (.8) F RG-3/- RG-3/- - RG-3/ J K "L" Thd. "N" Thd. / BSP.F / BSP.Tr Port connection is not required for RG models but an O-ring should be furnished. Pressure dj. Inlet Port IN. (.3) Through 7.5(.9) Spotface Locating Pin (.) (.) E H "N" Thd. Outlet Port RG-3 RG- (5.59) (5.55) Dimensions mm (Inches) B D E F G H J 5 (.98).5 (.85) 89 (3.5) (.).5 (.75) 5 (.) 7 (.) 79 (3.) 55.5 (.) 79 (7.5) 9. (3.) (.37). (.) (.57) 3.9 (.37) 8 (.89) RG-- -/8/9 9 (5.9) 59.5 (.3) RG-- RG-- - RG MILLIMETRES (INHES) / BSP.F / BSP.Tr Remote ontrol Port 7.5 (.8) 39 (.5) Fully Extended 7(5.79) Design "8" Only.5 (.8) Port connection is not required for RG models but an O-ring should be furnished. Pressure dj. Inlet Port IN. Mounting Surface (s Furnished) (.77) (.55) Hex. (8.5) (.5) (5.75) 3 (.8) (.3) Through 7.5(.9) Spotface Places Locating Pin (.) (.) 9 (3.) Outlet Port No.5
6 RT-3- -/8/9 Pressure Reducing and heck Valves RT-3// (.39) Fully Extended 8(5.83) RT-3- RT-3- - RT "" Thd. Rc 3/8 3/8 BSP.F 3/8 NPT / BSP.F / BSP.Tr (.) Design "8" Only 33 (.) (.) 8 (3.3) Remote ontrol Port.5 (.8) 5 (.) Pressure dj. IN. "" Thd. 8 (.89) (.73) (.77) 8 (.) 55 (.) (.55) Hex. "" Thd. Outlet Port or Reversed Free Flow Inlet Port RT- - -/8/9 Design "8" Only "T" Thd. B 8.5 (.73) L 85 (3.35) B Fully Extended "D" Remote ontrol Port "S" Thd. J.5 (.8) "S" Thd. 55 (.7) RT-- RT-- - RT-- -8 RT-- -9 RT-- - RT Inlet Port or Reversed Free Flow Outlet Port "Q" Thd. "S" Thd. "T" Thd. Rc 3/ 3/ BSP.F 3/ NPT Rc -/ -/ BSP.F - / BSP.F / BSP.F / BSP.Tr / BSP.Tr (.77) MILLIMETRES (INHES) Pressure dj. IN. E K F (.55) Hex. H No. "T" Thd. RT- RT- Outlet Port or Reversed Free Flow Inlet Port "Q" Thd. 9 (3.78) 3 (5.) Dimensions mm (Inches) B D E F H J K L N 8 (.89) (.) 3.5 (.) 3 (.9) 9 (5.87) 7 (.57) (.5) 5 (.5) N 79 (7.5) (8.5) 97.5 (3.8) (.88) Inlet Port or Reversed Free Flow Outlet Port "Q" Thd (.) (.5) 33 (.) (.57) 9 (.35) (.7) 8 (.8) 8 (3.39)
7 RG /8/9 D Remote ontrol Port "N" Thd. E Mounting Surface (s Furnished) Pressure Reducing and heck Valves RG-3// B Fully Extended "" (.77) (.55) Hex. Design "8" Only.5 (.8) H K RG-3/- RG-3/- - RG-3/ L "N" Thd. "P" Thd. / BSP.F / BSP.Tr Port connection is not required for RG models but an O-ring should be furnished. Pressure dj. IN. Inlet Port or Reversed Free Flow Outlet Port (.3) Through 7.5(.9) Spotface Locating Pin (.) (.) F J "P" Thd. Outlet Port or Reversed Free Flow Inlet Port RG-3 RG- (5.59) (5.55) Dimensions mm (Inches) B D E F H J K L 59 (.3) 9 (.7) 5 (.98).5 (.85) 89 (3.5) (.).5 (.75) 5 (.) 9 (3.5) 8 (.5) 55 (.) 79 (7.5) 9. (3.) (.37). (.) (.57) 3.9 (.37) 8 (.89) RG-- -/8/9 9 (.9) 59.5 (.3) Remote ontrol Port RG-- RG-- - RG MILLIMETRES (INHES) / BSP.F / BSP.Tr 7.5 (.8) 79 (3.) Fully Extended 7(5.79) Design "8" Only.5 (.8) Port connection is not required for RG models but an O-ring should be furnished. Pressure dj. IN. Inlet Port or Reversed Free Flow Outlet Port Mounting Surface (s Furnished) (.77) (.55) Hex. (8.5) (.5) (5.75) 3 (.8) (.3) Through 7.5(.9) Spotface Places Locating Pin (.) (.) 3 (5.) Outlet Port or Reversed Free Flow Inlet Port No.7
8 for Pressure Reducing (and heck) Valves HGM-3-/8/9 HGM-3X-/8/9 MILLIMETRES (INHES) (.39) 9 (3.5) 7 (.7) 3(.5) 7(.8) (.39) Deep For Locating Pin 3 (.) (.3) (.83) 7. (.8) (.39) (.) (.) 8 (3.3). (.8) 3.8 (.5) 35.7 (.).9 (.9) 9 (3.5) 8.8(.35) Through (.55) Spotface.7 (.7) 33.3 (.3) 58.7 (.3).7 (.3) 3.5 (.93) 9.5 (.77) (.) Through (From Rear) "" Thd. (.79) Deep This port is processed because of sharing this subplate with the H/H Type Pressure ontrol Valve and not used for the Pressure Reducing (and heck) Valve. HGM-3- HGM-3X- HGM-3-8 HGM-3X-8 HGM-3-9 HGM-3X-9 "" Thd. Rc 3/8 Rc / 3/8 BSP.F / BSP.F / BSP.F M 3/8 NPT / NPT 3/8- UN No.8
9 for Pressure Reducing (and heck) Valves HGM--/8/9 MILLIMETRES (INHES) "" Thd. (.79) Deep 5(.) (From Rear) (.87) 3 (.) (.3) (.33) 7 (.8) 7 (.) (.9) (.88) 77 (3.3). (.8). (.) 79. (3.3) 73 (.87) 39.7 (.5).3 (.) 8.8(.35) Through (.55) Spotface.3 (.37) (.39) 9. (.9).5 (.75) 7(.8) (.39) Deep For Locating Pin (.87) (.) HGM-X-/8/9 (.87) "" Thd. (.79) Deep 5(.) Through (From Rear). (.8). (.) 79. (3.3) 73 (.87) 39.7 (.5) (.3) This port is processed because of sharing this subplate with the H/H Type Pressure ontrol Valve and not used for the Pressure Reducing (and heck) Valve. (.77) (.3).3 (.37) (.9) 3 (5.35) (5.) 9. (.9).5 (.75) 8.8(.35) Through (.55) Spotface 7(.8) (.39) Deep For Locating Pin (.87) 75 (.95) (.).3 (.) HGM-- HGM-X- HGM--8 HGM-X-8 HGM--9 HGM-X-9 "" Thd. Rc 3/ Rc 3/ BSP.F / BSP.F BSP.F M 3/ NPT NPT 3/8- UN No.9
10 for Pressure Reducing (and heck) Valves HGM--/8/9 (.83) "" Thd. (.79) Deep Places 5(.) (From Rear). (.97).7 (.) (.7) 9.8 (3.8) 9.9 (3.) 8. (.9) 9. (.38). (.) (.3) Through 7.5(.9) Spotface (.7) MILLIMETRES (INHES) (.77) (.79) 8. (3.3) 7.5 (.).7 (.7) 35 (5.3) 7.5 (.). (.) (.8) 9 (3.78) (.9) 5 (5.9) 7(.8) (.39) Deep For Locating Pin 8(.) (.57) (5.5) (.7) HGM-X-/8/9 "" Thd. (.79) Deep Places 5(.) (From Rear) (.7) 9.8 (3.8) 9.9 (3.) 8. (.9) 9. (.38). (.) This port is processed because of sharing this subplate with the H/H Type Pressure ontrol Valve and not used for the Pressure Reducing (and heck) Valve. (.3) Through 7.5(.9) Spotface 5.5 (.) (.77) (.3) 8. (3.3) 7.5 (.) (.87) (.9) (.9) 77 (.97) 5 (.) 7 (.57). (.97).7 (.).7 (.7). (.) (.83) 7(.8) (.39) Deep For Locating Pin 8(.) (.57) (5.5) (.7) HGM-- HGM-X- HGM--8 HGM-X-8 HGM--9 HGM-X-9 "" Thd. Rc -/ Rc -/ -/ BSP.F / BSP.F -/ BSP.F M - -/ NPT 3/8- UN No.
11 Pressure Reducing and heck Valves RT/RG-3// Performance haracteristics Pressure Drop for Reversed Free Flow Hy draulic Fluid: Viscosity 35 mm /s ( SSU), Specific Gravity.85 Pressure Drop P PSI MPa RT-3 RG-3 5 L/min Flow Rate..5 U.S.GPM Pressure Drop P PSI 5 MPa..3. RT- RG L/min U.S.GPM Flow Rate Pressure Drop P PSI 8 MPa RT- RG L/min 5 7 U.S.GPM Flow Rate For any other viscosity, multiply the factors in the table below. mm /s Viscosity SSU Factor For any other specific gravity (G'), the pressure drop ( P') may be obtained from the formula below. P'= P (G'/.85) No.
12 Pressure Reducing Valves RT/RG-3// Spare Parts List RT/RG-3- -/8/9 RT/RG-- -/8/9 RT/RG-- -/8/9 UTION When making replacement of seals, please do it carefully after reading through the relevant instructions in the Operator's Manual List of Seals Item Name of Parts Bonded Seal RT RG -3 SO-NB-P SO-N-P9 SO-NB-P9 SO-NB-P8 SO-NB-P SG-FB-/ Part Numbers RT RG - SO-NB-P SO-N-P9 SO-NB-P9 SO-NB-P8 SO-NB-P8 SG-FB-/ RT RG - SO-NB-P SO-N-P9 SO-NB-P9 SO-NB-P3 SO-NB-P3 SG-FB-/ Quantity RT- RG- Note: When ordering the seals, please specify the seal kit number from the table below. 37 Section "" for Design 8 List of Seal Kits RT-3- RT-- -/8/9 RT-- -/8/9 RG-3- -/8/9 RG-- -/8/9 RG-- -/8/9 -/8/9 Seal Kit Numbers KS-RT-3- KS-RT-- KS-RT-- KS-RG-3- KS-RG-- KS-RG-- Note: No bonded seals are included in the seal kits. No.
13 Pressure Reducing and heck Valves RT/RG-3// Spare Parts List RT/RG-3- -/8/9 RT/RG-- -/8/9 RT/RG-- -/8/ UTION When making replacement of seals, please do it carefully after reading through the relevant instructions in the Operator's Manual List of Seals Item Name of Parts Bonded Seal RT RG -3 SO-NB-P SO-N-P9 SO-NB-P9 SO-NB-P SO-NB-P8 SO-NB-P SG-FB-/ Part Numbers RT RG - SO-NB-P SO-N-P9 SO-NB-P9 SO-NB-P8 SO-NB-P8 SO-NB-P8 SG-FB-/ RT RG - SO-NB-P SO-N-P9 SO-NB-P9 SO-NB-P SO-NB-P3 SO-NB-P3 SG-FB-/ Quantity RT- RG- Note: When ordering the seals, please specify the seal kit number from the table below Section "" for Design 8 List of Seal Kits RT-3- RT-- -/8/9 RT-- -/8/9 RG-3- -/8/9 RG-- -/8/9 RG-- -/8/9 -/8/9 Seal Kit Numbers KS-RT-3- KS-RT-- KS-RT-- KS-RG-3- KS-RG-- KS-RG-- Note: No bonded seals are included in the seal kits. No.3
IN-LINE CHECK VALVES CIT-02 / 03 / 06 / 10 (1/4,3/8,3/4,1-1/4) RIGHT ANGLE CHECK VALVES CRT / CRG-03 / 06 / 10 (3/8,3/4,1-1/4)
IN-LIN HK VLVS IT- / 3 / / (/,3/8,3/,-/) RIGHT NGL HK VLVS RT / RG-3 / / (3/8,3/,-/) Up to 5 MPa (33 PSI), 3 L/min (33 U.S.GPM) Pub. - IRTIONL ONTROLS These valves allow free flow in one direction and
More informationPilot Operated Check Valves
Pilot Operated Check Valves These check valves allow flow in one direction and prevent flow in the reverse direction, until operated by pilot pressure to allow free reverse flow. The specified cracking
More informationMECHANICALLY OPERATED DIRECTIONAL VALVES Rotary Type : DRT/DRG-02 Cam Operated : DCT/DCG-01, 03 Threaded Connection/Sub-plate Mounting
MCHNICLLY ORD VLVS Rotary ype : DR/DRG- Cam Operated : DC/DCG-, hreaded Connection/ Mounting General Information Up to 5 Ma (6 SI), L/min (6. U.S.GM) ub. C-6 hese valves are chiefly used to shift the pilot
More informationE SERIES. Specification. E Series. Relief and Flow Control Valves O M O M EIC-H Model No. Description
4 Ω-1 Ω Series Proportional Electro-ydraulic This relief and flow control valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since this valve controls
More informationMin. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.
Flow Control These are pressure and temperature compensating type valves and maintain a constant flow rate independent of change in system pressure (load) and temperature (Viscosity of the fluid). They
More information005 Series Modular Valves
5 Series Modular Valves ype of Modular Valve Class Graphic Symbols age Solenoid Operated Directional Valve DSG-5- *** - * - ressure Control Valves Flow Control Valves Directional Control Valves Modular
More informationCheck Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.
Vickers heck Valves Operated heck Valves 4G-10, 20 Series, 20 Series 4T-06/10, 20 Series Typical Section 4T1-06-D*-20-U, illustrating external drain and decompression features asic haracteristics Maximum
More informationMODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.
F MODULES YUKEN's Modular Valves are stack type valves, and require no piping. hey not only rationalise system build, but they also meet the technical requirements for a variety of hydraulic systems. Stacking
More informationVickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94
Vickers Flow Controls Flow Controls FN, F(C)G, FRG Released 6/94 685 Table of Contents FN03/06/10 Model Series Application Data...............................................................................
More informationDirectional Controls
Vickers Directional Controls Lever Operator Directional Control Valves DG17S-8-**-10 DG17S4-10 **-50 NF D08/D10, ISO-4401-08/10 Released 5/94 681 able of Contents General Information..................................................................................
More informationFlow Controls. DG**-06 Series Stacking Valves. Vickers. ISO (D06) Interface Flows to 340 l/min (90 USgpm) Pressure to 210 bar (3000 psi)
Vickers Flow Controls DG**-6 Series Stacking Valves ISO-441-8 (D6) Interface Flows to 34 l/min (9 USgpm) Pressure to 21 bar (3 psi) 5125./EN/598/A Introduction These stackable modules are designed for
More informationPVQ 13 A2 R SE 1 S 20 C-11 D
PVQ - Variable Displacement Piston Pump PVQ 13 A2 R SE 1 S 2 C-11 D 1 2 3 4 6 7 8 9 1 1 Model Series PVQ Inline Piston Pump Variable Volume Quiet Series 4 Rotation Viewed from shaft end R Right hand, standard
More informationDirectional Controls
Vickers Directional Controls Directional Control Valves DG3V-3-*-60 Hydraulic Operated DG17V-3-*-60 Lever Operated DG18V-3-*-60 Air Operated DG20V-3-*-60 Cam Operated DG21V-3-*-60 Plunger Operated CETOP
More informationLogic Elements Screw-in Cartridge Valves Pressures to 290 bar (4200 psi) Flows to 303 l/min (80 USgpm)
Vickers artridge Valves Logic Elements Screw-in artridge Valves Pressures to 9 bar ( psi) Flows to l/min (8 USgpm) Revised 9/98 7 ontents MODEL DESRIPTION TYPIL PPLITION PRESSURE bar (psi) RTED FLOW l/min
More informationDigital relief valves D-CG
Digital relief valves D-G unctional Symbols D-G- Specifications Size Maximum working pressure Rated flow Maximum flow Maximum adjustable pressure Ma Minimum control pressure Hysteresis Repeatability emperature
More informationPressure reducing valve, direct operated, type DR 5 DP Huade América 1
Pressure reducing valve, direct operated, type DR 5 DP Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, type DR 5 DP Size 5 up to 31.5MPa up to
More informationPressure reducing valve, pilot operated, Model 3DR
RA 26 928/06.98 Pressure reducing valve, pilot operated, Model 3DR Nominal size 16 Series 5X Maximum operating pressure 3600 PSI (250 bar) Maximum flow 58.1 GPM (220 L/min) Contents Description Page Features
More informationPressure reducing valve, pilot operated
Pressure reducing valve, pilot operated RE 26928/09.07 Replaces: 10.97 1/8 Type 3DR Size 16 Component series 5X Maximum operating pressure 250 bar Maximum flow 220 l/min H5844 Table of contents Content
More informationAxial piston pumps type PVC
www.atos.com Table TA16-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low noise
More informationAxial piston pumps type PVC
www.atos.com Table TA16SK-1/E Axial piston pumps type PV variable displacement, by a full line of mechanical controls PV are variable displacement axial piston pumps for medium pressure operation, low
More informationElectrically Operated Pressure-Relief Cartridge, Size 10
Electrically Operated Pressure-Relief Cartridge, Size 1 Q max = 14 l/min (37 gpm), p max = bar (5 psi) seated pilot stage, spool-type design, with remote contral port Z Series WUVPOC-2, WUVPLC-2 1 Description
More informationP2* MODULAR SUBPLATES FOR ISO (CETOP 03) VALVES
52 000/110 ED This series of modular subplates has been designed to make hydraulic circuits and can be used directly on power packs or on any other section of the machine. The subplates are assembled by
More informationManapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM
Catalog HY14-252/US Introduction Series C, CPO, F, PRD, PR, R anapak valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D3, D5 and D8 sandwich
More informationPilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1
Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pilot operated pressure relief valve sandwich plate,type ZDB/Z2DB6 Size
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model DR 10 DP Nominal size 10 Series 4X Maximum reduced pressure 210 bar (3050 PSI) Maximum flow 80 L/min
More informationHand & mechanical directional valves
www.atos.com Table E5-3/E Hand & mechanical directional valves ISO 44 sizes 6,, 6 and 25 H- Hand & mechanical operated directional valves are spool type, three or four way, two or three position valves,
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationVPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES 10
/ ED VPPL VARIABLE DISPLACEMENT AXIAL-PISTON PUMPS FOR INTERMEDIATE PRESSURE SERIES OPERATING PRINCIPLE The VPPL are variable displacement axial-piston pumps with variable swash plate, suitable for applications
More informationPressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series)
Pressure reducing valve, direct operated, sandwich plate, type ZDR6D...40B/(New Series) Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Pressure reducing valve, direct operated, sandwich
More informationCheck valve hydraulically pilot operated
Check valve hydraulically pilot operated RE 6/7.5 Replaces:. / Types SV and SL Nominal sizes to Component series X Maximum operating pressure 5 bar Maximum flow 55 l/min H555 Overview of contents Contents
More informationRP series Rotor Pumps
ontact etails RP series Rotor Pumps Nomenclature Features Low noise Substantial reduction of the operation noise, by to db (comparison with aikin products), and improved sound quality are achieved by adopting
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure in a secondary part of a hydraulic circuit. Pressure is
More informationLoad Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)
Vickers Cartridge Valves Load Controls Screw In Cartridge Valves Pressures to 50 bar (5000 psi) Flows to 90 l/min (50 USgpm) Rev. 2/99 722 Contents MODEL DESCRIPTION TYP. APPLICATION PRESSURE bar (psi)
More informationPressure Control (and Check) Valve
Pressure ontrol (and heck) Valve PRSSUR OTRO (A ) VAV 50 to 80l/min 4Pa eatures qthis circuit control valve works as a sequence valve, unloading valve, and counter balance valve. waximum operating pressure
More informationFlow rates to 200 l/min
LMP MULTIPORT - - Maximum pressure bar low rates to l/min Technical data ilter housing (Materials) Head: luminium Housing: ataphoresis-painted Steel ypass valve: rass - luminium Pressure Working pressure:
More informationPressure reducing valve, direct operated
Electric Drives and Controls Table of contents Hydraulics Pressure reducing valve, direct operated Model ZDR 6 D Nominal size 6 Series 4X Maximum operating pressure 20 bar (3050 PSI) Maximum flow 50 L/min
More informationHIGH PRESSURE FILTERS DFDK Series Inline Duplex Filters 4568 psi up to 90 gpm
DFDK Series Inline Duplex Filters 4568 psi up to 9 gpm Hydraulic Symbol DFDK QL L Ball Valve A DFDK QT T Ball Valve (sizes 33 or larger) A B B Features The DFDK Filters have a filter head of ductile iron
More informationDigital directional & flow control valves D-DF(R)G
Digital directional & flow control valves D-DF(R)G Functional Symbols Model Code D-DFG- D-DFG-~ D-DFRG-/ D-DFG--C--- Digital directional & flow control valve Size Spool type (neutral position) : ll ports
More informationOperation Manual Air Saver Unit ASV5000 Series
9IM-V066-b Operation Manual Air Saver Unit ASV5000 Series Thank you for your choice of Kuroda Pneumatics LTDs product on this time. Please read this operation manual carefully and use the product correctly.
More informationF05MSV-N* CONTINENTAL HYDRAULICS FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK
CONTINENTAL HYDRAULICS F05MSV-N* FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400
More informationDisplacement 12, , Maximum flow rate (at 1450 rpm) bar.
00/07 ED PVD VARIABLE DISPLACEMENT VANE PUMPS SERIES 0 OPERATING PRINCIPLE The PVD pumps are variable displacement vane pumps with a mechanical type of pressure compensator. They allow instantaneous adjustment
More informationVICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B
VICKERS SystemStak Valves ISO 441-3; NF-D3; 315 bar (45 psi); 6 L/min (15.7 USgpm) 1 G 227 uild a Compact, Cost-Effective, Reliable Hydraulic System with Vickers SystemStak Valves Reduces System Space
More informationAllspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW. Tel +44 (0)
Allspeeds Ltd. Royal Works, Atlas St Clayton le Moors Accrington Lancashire England BB5 5LW Tel +44 (0)1254 615100 www.allspeeds.co.uk HP690A Intensifier Panel including the following versions: Model Intensification
More informationFLOW CONTROL VALVES FLOW CONTROL VALVE HF WITH PRESSURE COMPENSATION SIZE 01 E 4. Description of the model designation. Outside dimensions
FLOW CONTROL VALV HF WITH PRSSUR COMPNSATION SIZ it incorporates a pressure compensation mechanism, the flow is kept constant even if the pressure varies at the and/or port. When equipped with a check
More informationAuto Feed Lube, Auto Feed Tank ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Fluid Proof pressure Operating pressure differential range (Difference between tank pressure and line pressure) Vibration resistance
More informationDouble throttle/check valve, Type Z2FS Series 30 Huade América 1
Double throttle/check valve, Type Z2FS Series 30 Huade América 1 BEIJING HUADE HYDRAULIC INDUSTRIAL GROUP CO.,LTD. Double throttle/check valve, Type Z2FS Series 30 Sizes 6 16 22 up to 31.5MPa up to 350
More informationINSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
More informationModel GP PRESSURE REDUCING VALVE Installation & Operation Manual
Model GP-2000 PRESSURE REDUCING VALVE Installation & Operation Manual Please read this bulletin thoroughly before using the pressure reducing valve, so that you may do so correctly and safely. Please carefully
More informationSandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve
Technical Information Series PRM General Description Series PRM reducing valves are used to regulate pressure, in one area of a circuit, below normal system pressure. This style valve is well suited to
More informationIndustrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US
Industrial Hydraulic Valves Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories Catalog HY14-2500/US Industrial Hydraulic Valves WARNING USR RSPONSIBILITY FAILUR OR IMPROPR
More informationElectro-hydraulic Proportional Flow and Direction Control Valve
lectro-hydraulic control valve his valve uses a D solenoid in a traditional 4- way solenoid valve to create a solenoid valve capable of both direction switching and highspeed control. he lineup consists
More information2-way flow control valve Model 2FRM 6
R 28 6/0.98 Replaces R 28 62/05.94 R 28 6/06.98 2-way flow control valve Model 2FRM 6 Nominal size 6 Series X Maximum operating pressure 4569 SI (5 bar) ) Maximum flow 8.45 GM (2 L/min) H//D 585/97 + H//D
More informationE Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21
E Series Piston Pumps Variable Displacement Series for Mobile Applications Technical Catalog PVE012 PVE19 PVE21 Table of Contents Introduction......................................................................................................
More informationPower Valve: Precision Regulator. High precision, large capacity relief regulator
Power Valve: Precision Regulator Series VEX High precision, large capacity relief regulator port large exhaust capacity pressure reducing valve which utilizes a nozzle flapper mechanism available as air
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More information20 to 280l/min 21MPa. econnecting a remote control valve to the vent port allows remote control of adjustment pressure.
Pressure Reducing (and heck) Valve eatures PRSSUR RU ( ) VV to 8l/min Pa -***-*- R -***-*- Specifications qthis valve is used when part of the circuit uses pressure that is lower than the main circuit.
More informationENGINEERING DATA. PVB Piston Pumps. w w w. F l u i D y n e F P. c o m Same Day Shipments of Units or Part Orders
ENGINEERING DT PV Piston Pumps Same Day Shipments of Units or Part Orders Interchangeable Parts Fully Tested w w w. F l u i D y n e F P. c o m Email:cs@FluiDyneFP.com Contents asic characteristics.........................................................................................
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More information4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)
4/3 Directional valve elements L8_5 with proportional (ED-I) control and with or without LS connections L8_5 (ED-I) RE 1831-7 Edition: 2.21 Replaces: 7.12 7.212 Size Series Maximum operating pressure 31
More informationTwo-stage valve type NE
Two-stage valve type NE Product documentation Operating pressure pmax: Flow rate Qmax: 700 bar (High pressure) 80 bar (Low pressure) 25 lpm (High pressure) 180 lpm (Low pressure) D 7161 03-2017-1.0 by
More informationFIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:
LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are
More informationBW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface
ywire Elements Element 4/3 with side ports IW5 Interface efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES 398SW5EN - 5--8 Technical data Nominal flow 5 l/min 3. US
More informationSystemStak Valves. ISO4401 Size 02
SystemStak Valves ISO441 Size 2 Reduce System Space Requirements SystemStak valves make compact hydraulic systems in which specific function valves are sandwich mounted between a directional valve and
More informationdirectional control valve series cv691
directional control valve series cv691 Contents Page 3 Page 4 Page 5 Page 6-7 Page 8 Page 9 Page 10 Page 11-12 General Information Technical Data Performance Curves Dimensions Relief Valve Advantages
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationProp. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08
Prop. -Way Pressure-Reducing Cart., Size / SAE 8 Q max = 1 l/min (4 gpm), p max = bar (6 psi) Direct acting, electrically operated 1 Description proportional -way pressure-reducing cartridges are size
More informationPILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R
PILOT OPERTED PRESSURE REDUCER VLVE - Series VR4R Veljan Pressure Reducer Valve Series VR4R are pilot operated controls used to control pressure a secondary part of a hydraulic circuit. Pressure is mataed
More informationAMG. Model Note) Rated flow (l/min (ANR)) Port size Mass (kg) 1 8, , 3 8. Specifications Fluid. Element life
Water Separator Series AMG Can remove water droplets in compressed air. Use this product in cases where water must be avoided, but not so dry as when an air dryer is used. Through the adoption of an element
More informationEXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
More information3-Way Pressure-Reducing Cartridge, Size 2 4
-Way Pressure-Reducing Cartridge, Size 2 Q max = 2 l/min, p max = 25 bar Spool-type design, direct acting, with manual adjustment 1 Description Compact construction for cavity type AM /- UNF to Bucher
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationE 328 E 498 Tank top mounting Connection up to G1½ / -24 SAE and SAE 2 Nominal flow rate up to 600 l/min / gpm
Return-Suction Filters E 8 E 98 Tank top mounting Connection up to G½ / - SE and SE Nominal flow rate up to 6 l/min / 8. gpm Description pplication For operation in units with hydrostatic drives, when
More informationSize 6 up to 31.5MPa 1) up to 25 L/min
BEIJING HUADE HYDRAULICS INDUSTRIAL GROUP CO.,LTD. 2-way flow control valve Type 2FRM 6 Size 6 up to 31.5MPa 1) up to 25 L/min RC:28160/12.2004 Replaces RC28160/05.2001 Features: - External closing of
More informationSeries SFD. Clean Air Filter. Variations. Made to Order. Type. Cartridge (replaceable element) Disposable (non-replaceable element) Up to 100
Clean Air Filter Variations SFD SFD SFD SFD Made to Order Type Disposable (non-replaceable element) Cartridge (replaceable element) Flow rate L/min (ANR) (at inlet pressure.7 MPa) Up to 6 Up to 8 Up to
More informationInverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationPressure reducing/relief valve, pilot operated type UZCP10
ressure reducing/relief valve, pilot operated type UZC10 NS10 up to 1, Ma up to 80 dm /min D SHEE - OER RION MNU NUL WK 420 280 07.2014 LICION he pressure reducing/relief valve type UZC10 pilot operated
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationBulletin 2533-M3/USA Service Bulletin. Series PR25MA, PR25P, PR25S, PR32P, PR32S. Effective: July 1, Pilot Operated Pressure Reducing Valves
Service Bulletin Series PR25MA, PR25P, PR25S, PR32P, PR32S Effective: July 1, 1995 Pilot Operated Pressure Reducing Valves WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS
More information180 Series Rotary Shear Directional Control Valve
180 Series Rotary Shear Directional Control Valve Up to l 38 lpm, 10 US gpm l 700 bar, 10,000 psi Milwaukee, WI 53235, US el: +1 (414) 769-6400 sales-us@webtec.com St. Ives, Cambs. E27 3LZ, UK el: +44
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationNew Product. Air Consumption 70% Down. Precision Regulator Air Saving Type. RPE Series PRECISION REGULATOR RPE SERIES CC-1072A
Air Consumption 70% Down New Product Precision Regulator Air Saving Type RPE Series PRECISION REGULATOR RPE SERIES Large Air Saving CC-1072A Air Consumption 70% Down. New Type Eco-friendly Precision Regulator
More informationStandard Operating and Maintenance Instructions for Pumping System Model PS-150
Standard Operating and Maintenance Instructions for Pumping System Model PS-150 High Pressure Equipment Company, LLC 2955 West 17th Street, Suite 6 PO Box 8248 Erie, PA 16505 USA 814-838-2028 (phone) 814-838-6075
More informationIFP C175-* REMOTE CONTROL RELIEF VALVE
IFP C175-* REMOTE CONTROL RELIEF VLVE Low Pressure Differential Quiet Operation Easy to djust Handle Three Pressure Ranges vailable Panel Mount Design P T Model Pressure Range (PSI) Rated Flow (US GPM)
More informationMPS/MST SPIN - ON FILTER SUCTION - RETURN SERIES. Maximum working pressure 12 bar. Flow rates to 300 l/min
MPS/MST SERIES SPIN - ON FILTER SUCTION - RETURN Maximum working pressure 1 bar Flow rates to l/min D e s c r i p t i o n MPS/MST The spin-on filter series is a complete product range suitable, for both
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More information/ Air Line Kit AL - M1202. / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651
/ Air Line Kit AL - M1202 / OPERATION MANUAL P1 - P9 / English P11 - P19 OM-K0651 002 1 Thank you for purchasing the Air Line Kit " AL - M1202 ". This Air Line Kit is designed to adjust the air supply
More informationLeak-Free Load-Control Valve SAE ½ psi flange
Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control
More informationDirectional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
More informationInstruction Manual Updated 7/26/2011 Ver. 2.2
4-Unit Model MB HTHP Filter Press #171-50-4: 115-Volt #171-51-4: 230-Volt Instruction Manual Updated 7/26/2011 Ver. 2.2 OFI Testing Equipment, Inc. 11302 Steeplecrest Dr. Houston, Texas 77065 U.S.A. Tele:
More informationLeak free Pipe Rupture Valve for Excavators
Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................
More informationTECHNICAL DATA. Page 1 of 12
Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control
More informationAuxiliary valve QDS6 Sequence valve, 3-way. Catalogue (GB) (US) October 1998
Auxiliary valve Sequence valve, 3-way Catalogue 9129 8542-02 (GB) 9129 8542-06 (US) October 1998 Sequence valve, 3-way Applications The sequence valve is designed to open or close a hydraulic pilot signal
More information4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1...
4/3 Directional valve elements L8L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L8L1...(EDC-LV) RE 1831-17 Edition: 2.216 Replaces: 7.12 Size 6 Series Maximum
More informationPressure-Relief Cartridge Valve, Size 4
Pressure-Relief Cartridge Valve, Size 4 Q max = 30 l/min, p max = 420 bar Seated design, direct acting, with mechanical operation Compact construction for cavity type AL 3/4-16 UNF High flow rates 7 pressure
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationPRESSURE SEQUENCE VALVE TYPE UZK
PRESSURE SEQUENCE VALVE TYPE UZK Size 10, 20, 30 31,5 MPa up to 450 dm 3 /min WK 450 414 04. 2000r. Pressure sequence valves type UZK are used for switching a system or part of a system off when a set
More informationInstallation Instructions, Pressure Regulator Series
Installation Instructions, Pressure Regulator 20517 Series Manual Model: 20517, L20517 Air motor Operated: F20517, LF20517 Hydraulic Motor Operated: G20517, LG20517 1. GENERAL ------------------------------------------------------------------------------
More informationOperating Instructions Models and Hydrostatic Test Pumps
Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex
More information