UPGRADABLE PRESSURE BALANCE BAT/SOWER FITTING VOLUME AND TEMPERATURE CONTROL VALVE 1-5/8" TO 3-1/ ROUG VALVE OPTIONS 1/2" NPT 1/2" NOM or 1/2" NOM or

Transcription

1 UPGRADABLE PRESSURE BALANCE BAT/SOWER FITTING VOLUME AND TEMPERATURE CONTROL VALVE MODEL NUMBER: R121 Valve Body Shown R121 Pressure Balance Rough Valve Body only inlets/outlets. LESS trim. Available s Colony Soft Green Tea Moments R121SS Pressure Balance Rough Valve Body only with Screwdriver stops Portsmouth inlets/outlets. Screwdriver stops. LESS trim. R125 Pressure Balance Rough Valve Body only Female thread inlets/outlets. LESS trim. Princeton Quentin Reliant 3 R125SS Pressure Balance Rough Valve Body only with Screwdriver stops Studio Female thread inlets/outlets. Screwdriver stops. LESS trim. R127 Pressure Balance Rough Valve Body only PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807). LESS trim. Town Square R127SS Pressure Balance Rough Valve Body only with Screwdriver stops PEX inlets/universal outlets for Crimp Ring PEX system (ASTM F1807). Screwdriver stops. LESS trim. GENERAL DESCRIPTION: Cast brass body, washerless 47 mm ceramic disc valve cartridge with volume and temperature control, back-to-back capability, integrated check valves, and hot limit safety stop. Pressure balancing cartridge maintains constant output temperature in response to changes in relative hot and cold supply pressure. One-half inch inlets and outlets (choice of universal, direct sweat, threaded, PEX or CPVC). Available with screwdriver stops. Rough-in plaster guard designed for use as thin-wall mounting adaptor. Valve body will accept a variety of decorative Bath/Shower trim kits. R128 Pressure Balance Rough Valve Body only PRODUCT FEATURES: R129SS Pressure Balance Rough Valve Body only PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960). LESS trim. R128SS Pressure Balance Rough Valve Body only PEX inlets/universal outlets for Cold Expansion PEX system (ASTM F1960). Screwdriver stops. LESS trim. R129 Pressure Balance Rough Valve Body only CPVC inlets/universal outlets. LESS trim. Cast Brass Valve Body: Durable - Quality that will last CPVC inlets/universal outlets. Screwdriver stops. LESS trim. a lifetime. Ideal material for prolonged contact with water. Ceramic Disc Valve Cartridge: Assures a lifetime of drip-free performance. Allows easy control over both water temperature and volume. Pressure Balancing Valve Cartridge: Maintains constant output temperature in response to changes in relative hot and cold supply pressure. Diaphragm system with integrated check valves engineered to eliminate cross flow. Avoids failure due to mineral deposits - ideal for use in hard water. Back-to-Back Capability: ot and cold can be reversed quickly and easily. Adjustable ot Limit Safety Stop: Limits the amount of hot water allowed to mix with cold. Reduces the risk of accidental scalding. Exclusive Plaster Guard: Plaster guard is designed to protect valve during installation and serve as a mounting plate for thin-wall installations. Two-piece design allows valve to be tested prior to trim installation. Wide Rough-in Range: From 1-5/8" to 3-1/. See reverse side for dimensional valve drawings. SUGGESTED SPECIFICATION: Bath/shower fitting shall feature a cast brass valve body. Shall feature ceramic disc valve cartridge which allows user to control both water temperature and volume. Fitting shall be equipped with pressure balancing cartridge engineered to eliminate cross flow and avoid failure due to mineral deposits. Shall also feature a hot limit safety stop. Fitting shall be: Rough Valve Body - American Standard Model # R12, - American Standard Model #.. B11

2 UPGRADABLE PRESSURE BALANCE BAT/SOWER FITTING VOLUME AND TEMPERATURE CONTROL VALVE 1-5/8" TO 3-1/ ROUG VALVE OPTIONS 1/2" NPT 1/2" NOM or 1/2" NOM or or 5-7/8" (149 mm) or FINISED WALL UNIVERSAL (R121) TO FINISED FLOOR USUALLY BETWEEN 65" (1651 mm) AND 78" (1981 mm) 3-3/8" (86 mm) 3-3/8" (86 mm) TREADED (R125) 1/2" 3-3/8" (86 mm) TREADED WIT STOPS (R125SS) 4-1/ (109 mm) 1/2" PEX (ASTM F1807) or 5-7/8" (149 mm) 1-1/2" MIN. UNIVERSAL WIT STOPS (R121SS) 1/2" PEX (ASTM F1807) (165 mm) or PEX WIT STOPS (R127SS) ASTM F1807 PEX (R127) ASTM F / (109 mm) 1/2" PEX (ASTM F1960) or 1/2" PEX (ASTM F1960) CPVC (R129) 7-15/16" (202 mm) CPVC B12 PEX WIT STOPS (R128SS) ASTM F /16" (160 mm) or or PEX (R128) ASTM F1960 CPVC (165 mm) or CPVC WIT STOPS (R129SS)

3 UPGRADABLE PRESSURE BALANCE BAT/SOWER FITTING VOLUME AND TEMPERATURE CONTROL VALVE Valve + Trim: & Valve Body Packaged Separately VALVES Example: R121 - Direct Sweat Valve Body T Portsmouth Bath/ Shower R121SS R121 To order: Specify valve body and trim kit desired R125 w/ Screwdriver Female Thread R128 R128SS R129 Quentin C C OFF B/S T T T T T T Shower T T T T T T Valve T T T T T T T T T Shower T T T Reliant 3 Studio Town Square B/S T T T Shower T T Valve T T Reliant 3 CPVC w/ Screwdriver FLOW RATE* 8 Spout INLET PRESSURE (PSI) *Flow rates shown are for mixed hot and cold. Colony Soft Green Tea Moments B/S GALLONS PER MINUTE Princeton PEX Female Thread w/ Screwdriver w/ Screwdriver (ASTM F1807) (ASTM F1807) PEX R129SS PEX CPVC w/ Screwdriver (ASTM F 1960) (ASTM F 1960) PEX Colony Soft Green Tea Moments Portsmouth R127SS R127 R125SS CODES AND STANDARDS These products meet or exceed the following codes and standards: ANSI A ASSE 1016 ASME A CSA B 125 Town Square B/S T T Shower T T Valve B13

4 s for R121, R121SS, R125, R125SS, R127, R127SS, R128, R128SS, R129 and R129SS rough valve bodies. ONLY. VALVE MUST BE ORDERED SEPARATELY. COLONY SOFT T BAT/SOWER "Easy Clean" T SOWER ONLY "Easy Clean" 1-5/8" TO 3-1/ (41 mm TO 83 mm.) 7" (178 mm) T VALVE ONLY Metal Lever handle 6" (153 mm) 3" (76 mm) 1-1/2" 6-3/ (172 mm) 1/2" 5-1/8" (130 mm) COLONY SOFT T BAT/SOWER Turbine spray - 1.5gpm max. flow Angle adjustable Showerhead, arm and flange 1-5/8" TO 3-1/ 7" (178 mm) T SOWER ONLY Water Saving FloWise Turbine spray - 1.5gpm max. flow Angle adjustable Showerhead, arm and flange 1.5 gpm/5.7 L/min. maximum 6" (153 mm) 3" (76 mm) 1-1/2" 6-3/ (172 mm) 1/2" 5-1/8" (130 mm) GREEN TEA T BAT/SOWER 6 3/ Rain 12" Brass shower arm.075 Stainless Steel (PVD) 5" (127 mm) 2-1/ (57 mm)d. 305 mm (12") T SOWER ONLY 6 3/ Rain 12" Brass shower arm 7 FOR EAD DIA. 1-1/2" T VALVE ONLY 4-5/8" (117mm ) 5-7/8" (149 mm) 1/2" B14

5 s for R121, R121SS, R125, R125SS, R127, R127SS, R128, R128SS, R129 and R129SS rough valve bodies. ONLY. VALVE MUST BE ORDERED SEPARATELY. GREEN TEA T BAT/SOWER 3-function (216 mm) (12.7 mm) NPT 5/3/8" (137 mm) TO FINISED FLOOR USUALLY BETWEEN 65'' (1651 mm) AND 80'' T SOWER ONLY 3-function "SEE ILLUSTRATION " DIA. 1-3/ (44 mm) 2.0 gpm/7.6 L/min. maximum 4-5/8" (117 mm) 1/2" 5-7/8" (149 mm) MOMENTS T BAT/SOWER Adjustable 3-function Brass slip-on diverter tub spout 3/ TO 2-3/8" (19 mm TO 60 mm) 5-5/8" (143 mm) T SOWER ONLY Adjustable 3-function 2-3/8" (60 mm) (215 mm) 7 FOR EAD TUB T VALVE ONLY 8-3/8" SR (213 mm) 1-1/2" 1/2" (165 mm) TOP OF TUB RIM MOMENTS T BAT/SOWER Water Saving FloWise 3-function Brass slip-on diverter tub spout 1-1/ (32 mm) DIA. OLE 4-7/8" (124 mm) 4-3/ (122 mm) T SOWER ONLY Water Saving FloWise 3-function 7 FOR EAD 2.0 gpm/7.6 L/min. maximum 3/ TO 2-3/8" (19 mm TO 60 mm) (215 mm) 8-3/8" SR (213 mm) 1-1/2" (165 mm) TUB 1/2" TOP OF TUB RIM B15

6 s for R121, R121SS, R125, R125SS, R127, R127SS, R128, R128SS, R129 and R129SS rough valve bodies. ONLY. VALVE MUST BE ORDERED SEPARATELY. PORTSMOUT T BAT/SOWER Water Saving FloWise 3-function.224 Oil Rubbed Bronze 4-7/8" (125 mm) FINISED WALL TO FINISED FLOOR USUALLY BETWEEN 65'' AND 78'' (1651 mm AND 1981 mm) (216 mm) T SOWER ONLY Water Saving FloWise 3-Ffnction 7 FOR EAD 7-5/8"D. (195 mm) T BAT/SOWER 1-1/2" 2.0 gpm/7.6 L/min. maximum 1/2" 5-1/8" (130 mm) PRINCETON T BAT/SOWER Metal Lever andle Wall escutcheon, arm and flange FINISED WALL 1-5/8" TO 3-1/ 3-5/8" (92 mm) T SOWER ONLY Metal Lever andle Wall escutcheon Showerhead, arm and flange 5-1/2" (140 mm) Off T VALVE ONLY Metal Lever andle Wall escutcheon 8-1/8" (205 mm) 3-5/8" (92 mm) ot 1-1/2 1/2" 5" (127 mm) QUENTIN C F OF T BAT/SOWER 12" Shower arm and flange 6" Brass rain.224 Oil Rubbed Bronze (166 mm) (12,7 mm) NPT 6" (152 mm) DIA. 12" (307 mm) T SOWER ONLY 12" Shower arm and flange 6" Brass rain 15-9/16" (396 mm) 9-1/ (234 mm) C T VALVE ONLY 4-5/8" (119 mm) 6-3/8" (163 mm) 1/2" (13 mm) SLIP-ON SPOUT B16

7 s for R121, R121SS, R125, R125SS, R127, R127SS, R128, R128SS, R129 and R129SS rough valve bodies. ONLY. VALVE MUST BE ORDERED SEPARATELY. RELIANT 3 T BAT/SOWER "Easy Clean" 1-5/8" TO 3-1/ 4-1/ (108 mm) T SOWER ONLY "Easy Clean" 6" (152 mm) 3" (76 mm) 1-1/2" T VALVE ONLY 1/2" 5-1/2" REF (140 mm) RELIANT 3 T BAT/SOWER Turbine Spray-1.5gpm max. flow Angle adjustable 7-3/8" REF (187 mm) 3" (76 mm) 1-1/2" 1/2" 5-1/2" REF (140 mm) 1.5 gpm/5.7 L/min. maximum T VALVE ONLY 3-3/ REF (95 mm) T SOWER ONLY Turbine Spray-1.5gpm max. flow Angle adjustable STUDIO with FloWise 1-5/8" TO 3-1/ 6-3/ (171 mm) 8-1/ (210mm) B17

8 s for R121, R121SS, R125, R125SS, R127, R127SS, R128, R128SS, R129 and R129SS rough valve bodies. ONLY. VALVE MUST BE ORDERED SEPARATELY. TOWN SQUARE T BAT/SOWER Cast brass shower arm 4-1/2" Rain 1" (25 mm) 2" (51 mm) 1/2" I.P.S. 8" (203 mm) T SOWER ONLY Cast brass shower arm 4-1/2" Rain 7-5/8" (194 mm) 7-5/8" (194 mm) 7-1/ (184 mm) T VALVE ONLY 1" (25 mm) 1/2" TOP OF TUB RIM TOWN SQUARE T BAT/SOWER Cast brass shower arm Water Saving FloWise 3-function 4-7/8" (124 mm) 1" (25 mm) 1/2" I.P.S. (216 mm) T SOWER ONLY Cast brass shower arm Water Saving FloWise 3-Function 7-5/8" (194 mm) 7-1/ (184 mm) 7-5/8" (194 mm) 1" (25 mm) 1/2" 2.0 gpm/7.6 L/min. maximum TOP OF TUB RIM B18