ISS Safety Rules. Make safety second nature
|
|
- Emily Nash
- 5 years ago
- Views:
Transcription
1 ISS Safety Rules Make safety second nature
2 2 ISS SAFETY RULES
3 ISS SAFETY RULES 3 INTRODUCTION We are a company driven by close to 500,000 strong people spread across 77 countries around the globe. And we are committed to ensuring that each one of our people go home well to their families and friends after a safe working day at ISS. Safety has to become second nature to all of us. We have therefore developed the ISS Safety Rules to help all of us keep safety in mind when we carry out our daily tasks and to achieve the safety culture we aspire to. These safety rules provide a set of guidelines and guidance on how we can ensure and create a safe working environment for our people. I ask you to understand them and make them a part of your daily life. A safe working environment is also a key part of our value proposition to our customers. We promise, among other things, to safeguard our customer s people, assets and brand. It is only when our culture of safety, as defined in the ISS Safety Rules, is fully implemented on the site, that we truly live up to our value proposition. Aligning our behaviours behind the ISS Safety Rules is an important part of this promise. The safety of everyone depends on our common commitment to these rules. It goes without saying that these safety rules do not cover all operational risks. As always, use common sense and make sure that you are aware of any other safety or local requirements. Stay safe. Jeff Gravenhorst, CEO November 2016 For more information, we have developed an animation film Living the ISS Safety Rules that is available on our internet site and on social media.
4 4 ISS SAFETY RULES BACKGROUND The underlying philosophy of the ISS Safety Rules is that there should be no gap between what we state and what we do. An important element is our commitment to an open safety culture where our employees feel secure in seeking advice and in raising concerns. If you are unsure of what to do in particular circumstances or concerned that the rules are not followed, you have the responsibility to speak up. What is expected of you? Know the ISS Safety Rules and the consequence of non-compliance: You will hurt yourself; You will hurt others; Failure to comply can result in a serious injury or fatality. Intervene when you see an unsafe act or condition and welcome interventions yourself. Reflect on your safety behaviours to identify how you can improve; each one of us is accountable for the consequences of our behaviour. Recognise that we can all improve and learn and lead through personal example. The ISS Safety Rules cover the following activities: Stopping unsafe work Working with chemicals Confined space entry Permit to Work Housekeeping Driving safety Energy isolation Manual handling Electrical safety Working at heights
5 ISS SAFETY RULES 5 STOPPING UNSAFE WORK Everyone has an obligation to stop work that is unsafe: Do it safely or not at all; Always follow safe working practices and procedures; Always comply with applicable rules and regulations; If you see it, you own it take action even if others have ignored something unsafe; Always report hazards following local procedures and ensure corrective actions are carried out. PERMIT TO WORK A Permit to Work system must be used for activities that are high risk and where a formalised documented process is necessary to ensure safety. Most work in confined spaces, high energy systems, hot work in flammable atmospheres and high level operations require a Permit to Work. The Permit shall: Define scope of work; Identify hazards and assess levels of risk; Establish control measures to eliminate or mitigate hazards; Be authorised by the responsible person for the site or facility; Ensure adequate control and instructions for the return to normal operation; Be communicated to all affected personnel and posted, as required. Link the work to other associated work permits or simultaneous operations;
6 6 ISS SAFETY RULES ELECTRICAL SAFETY Electrical safety is your safety. Therefore: Make sure you identify the electrical hazards with any electrical equipment before you use it; Use approved electrically safe tools and equipment; Check for frayed or damaged contacts; Inspect electrical equipment before you use and report any defects; Only competent personnel should repair equipment; Keep all wires and leads away from any heat source, water or other conductive liquids; Do not have wires lying across the floor this is a tripping hazard! ENERGY ISOLATION Where isolation of energy systems such as mechanical, electrical, process, hydraulic and others is required by a risk assessment, it should only proceed when: The method of isolation and discharge of stored energy are agreed and executed by a competent person; Any stored energy is discharged; A system of appropriate locks and tags is utilised at isolation points; A test is conducted to ensure the isolation is effective prior to the work; Isolation effectiveness is periodically monitored; There is a retest to ensure isolation is carried out after any break or change in conditions.
7 ISS SAFETY RULES 7
8 8 ISS SAFETY RULES WORKING WITH CHEMICALS Use only approved chemicals you have been trained to use if you don t know it, don t use it! Wear the correct Personal Protective Equipment for the job and follow safety signage; Only use chemicals from containers or bottles with correct labels; All chemicals should be identified for hazards and assessed for risk; Follow safe working procedures and advice from Material Safety Data Sheets and Safety Labels when transporting, storing, using and disposing chemicals; All approved chemicals for use are to be recorded in a register; Keep flammable chemical away from any heat source; Use trays where possible to contain any leaks and spills; Clean up or report any chemical spills immediately; Only use original containers/bottles/ cans for storage and keep them closed when not in use. HOUSEKEEPING A safe work place starts with good housekeeping. The main requirements are to: Keep the work area clean and tidy; Ensure equipment is maintained as per manufacturers instructions; Put waste in the appropriate containers provided; Store paint, chemicals and hazardous substances in appropriate containers and at approved locations; Not have ropes, wires or cables lying across the floor this is a tripping hazard; Keep those tools and equipment not in immediate use in their proper storage area; Keep passageways and stairways clear at all times; Clean up spills immediately; Tidy up the work area before leaving it.
9 ISS SAFETY RULES 9 MANUAL HANDLING Manual handling is one of the most common tasks we do and includes lifting, pushing and pulling. The initial and most important consideration is: Can moving the load be avoided? or Can the load be moved with mechanical aids or equipment? If neither of these options are possible: Examine the object to be lifted; Never try to handle something that is too heavy or awkward divide the load into smaller parts if necessary or ask someone to help you; Ensure you are wearing the right Personal Protection Equipment for the task (e.g. shoes, gloves, etc.); Plan the task and inspect the route to be taken (are there safe places to stop?); Adopt the right posture throughout the lift; Maintain your balance, legs should be shoulder width apart, knees bent and one foot just front of the other. Let your legs do the work and carefully push up your body; Get a good grip of the object to be lifted with your hands and not your fingers; protect your hands; Keep the object close to your body for less strain; Do not twist If you have to change direction, use your feet. WORKING AT HEIGHTS The following hierarchy for managing and selecting equipment for work at heights should be used: Avoid working at heights where it is possible; Use work equipment or other measures to prevent falls where working at heights cannot be avoided; Where the elimination of a risk of fall cannot be eliminated, use work equipment or other measures to minimise the distance and consequences of a fall should one occur. When working at heights, ensure: It is properly planned and organised; It takes account of weather conditions that could endanger health and safety; Those involved in working at heights are medically fit, trained and competent; The place where working at heights is done is safe; Equipment for working at heights is appropriately inspected; The risks from fragile surfaces are properly controlled; The risks from falling objects are properly controlled.
10 10 ISS SAFETY RULES
11 ISS SAFETY RULES 11 CONFINED SPACE ENTRY Entry into any confined space cannot proceed unless: All other options have been ruled out; A risk assessment is carried out; There is a valid permit for the entry if required by the risk assessment; All persons involved are medically fit and competent to do the work; All sources of energy affecting the space have been isolated; A rescue plan as defined by the risk assessment is developed; Testing of atmospheres is conducted, verified and repeated as often as defined by the risk assessment; Stand-by person is stationed at all times they shall not attempt a rescue; There is an effective communication between the stand-by person and person(s) in the confined space; There is appropriate Personal Protection Equipment in use and instructions given for its use; Unauthorised entry is prevented. DRIVING SAFETY A vehicle must only be operated when: The vehicle is fit for purpose, inspected and confirmed to be in safe working order; The number of passengers does not exceed the manufacturer s design specification for the vehicle; Loads are secure and do not exceed manufacturer s design specifications or legal limits for the vehicle; Seat belts are installed and worn by all occupants; Safety helmets are worn by riders and passengers of motorcycles, scooters and bicycles. Drivers authorised to operate the vehicle should: Be trained, certified and medically fit to operate the class of vehicle; Not be under the influence of alcohol or drugs; Not be suffering from fatigue; Not use hand-held cell phones or hand held radios while driving (best practice is to avoid using phones and two-way radios when driving and instead pull over to a safe place and talk).
12 ISS A/S Head of Group HSEQ and CR Buddingevej Søborg, Denmark Phone: Revision 1, November 2016 ISS A/S
We also ask our subcontractors and partners to. At EHS Support we re passionate about safety. The. ensure the safey of themselves, their coworkers and
Golden Rules of Safety July 2014 EHS Support s commitment to environmental, health, At EHS Support we re passionate about safety. The We also ask our subcontractors and partners to ensure the safey of
More informationA MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
More informationGOLDEN SAFETY RULES AFT DR
GOLDEN SAFETY RULES The Golden Safety Rules exist to keep you safe Your safety and the safety of your workmates is paramount. The Golden Safety Rules exist, above all else, to keep you safe. Since we adopted
More informationOur commitment to safety
2 Our commitment to safety At South East Water, we have an absolute commitment to achieving and maintaining a safe and healthy workplace for our people, including our contractors and stakeholders which
More informationSafety at Work. Rules for Staying Alive
Safety at Work Rules for Staying Alive Safety at Work Rules for Staying Alive Introduction The purpose of Dana Gas Rules For Staying Alive is to address the key causes of deaths in our industry. These
More informationContractor handbook. Purpose
Page no: 1 / 6 Contractor handbook Purpose Mitie aims to ensure that the highest levels of performance are achieved by all persons working for us or on our behalf. We require the same level of performance
More informationSafety is a priority at Vault Pipelines.
Safety is a priority at Vault Pipelines. At Vault Pipelines we believe that every incident is preventable and that every task can be completed safely and efficiently. We will achieve this through our cultural
More informationContractor OHS Induction. AOHS-05-GUI September 2016
Contractor OHS Induction AOHS-05-GUI-002 8 September 2016 1 About AQWEST AQWEST is a Government Trading Enterprise responsible for supplying drinking water to Bunbury. Formed in 1906 as the Bunbury Water
More informationContractor/Visitor Safety Orientation UNBC
Contractor/Visitor Safety Orientation UNBC 3333 University Way, Prince George, BC V2N 4Z9 Revised: October 2015 For All Emergencies call Security 250-960-7058 ***DO NOT DIAL 911*** Important UNBC Telephone
More informationManual Handling Procedure
Manual Handling Procedure Table of Contents 1 Purpose... 3 2 Scope... 3 3 Definitions... 3 4 Responsibilities... 3 4.1 Managers And Supervisors... 3 4.2 Workers (Employees, Contractors And Visitors)...
More informationWORK METHOD STATEMENT CARPET LAYING
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationCONTRACTOR SAFETY INDUCTION HANDBOOK
CONTRACTOR SAFETY INDUCTION HANDBOOK As a valued contractor for Total Group we would ask that you read and carefully consider the details included in this document. Total Group carry out work for a number
More informationCONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK
CONSTRUCTSAFE TIER 1 HEALTH AND SAFETY COMPETENCY TEST FRAMEWORK ConstructSafe Project Team March 2018 Version 1.3 1 Table of Contents 1. Introduction... 3 2. Candidate minimum required knowledge... 3
More informationManual Handling October 2014
Manual Handling October 2014 How Are We Doing? LTI s 0 in last 12 months Period Location Oil & Gas Base AFR Oil & Gas Sites AFR Total AFR September 0 0 0 12 Month Rolling 0 1.59 1.45 Statistics presented
More informationEHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)
(Ref. SOP QMS-080; EHS-010) Form-445 Inspected by: Date of inspection Date of Report Report # Pages Area Manager: Area Inspected: General This EHS Workplace Inspection was conducted by: Scope of the Inspection:
More informationInduction SGAC - EVENTS -
Induction SGAC - EVENTS - 1 P a g e CONTENTS CONTENTS... 2 WELCOME... 3 VISITING SGAC... 3 EMERGENCY PROCEDURES... 3 Warning Tones:... 4 It Is Important You Know The Location Of:... 4 If You Discover Smoke
More informationWe live by the Life Saving Rules so that everyone goes home safe, every day.
We live by the Life Saving Rules so that everyone goes home safe, every day. OUR COMMITMENT STATEMENT: As a TransCanada employee or contractor performing work on behalf of TransCanada, I will adhere to
More informationLIFE SAVING RULES EXPLANATION GUIDE EDITION #1.0
2018 LIFE SAVING RULES EXPLANATION GUIDE EDITION #1.0 ABOUT ENERGY SAFETY CANADA Energy Safety Canada is the national safety association for the oil and gas industry. We develop and support common industry
More informationOGP Supplementary Life-Saving Rules
OGP Supplementary Life-Saving Rules Prevent dropped objects Position yourself in a safe zone in relation to moving and energised equipment 9. 10. 14. 15. Do not work under or near overhead electric power
More informationWork At Heights Toolkit. for Supervisors
Work At Heights Toolkit for Supervisors For Supervisors How to use this toolkit? The toolkit aims to provide information for supervisor to communicate one topic a day to workers. Pictures are for illustration
More informationIMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY
IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY Approved by the Trustees: November 2016 Health and Safety Policy Introduction The main piece of health and safety legislation is the Health and Safety
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More informationWORK HEALTH AND SAFETY
Employees in South Australia are protected by and required to adhere to State & National health and safety regulations. Employers, employees and others all have an important role to play. For further information
More informationSafeLandUSA - Syllabus
1. Incident Reporting and Investigation Responsibility for reporting Definition of an incident to report How to report an incident Types of incidents Purpose of incident investigation Explain why incidents
More informationTHE CONTROLLED COPY OF THIS DOCUMENT IS ON THE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR THE DATE AT THE BOTTOM OF THE PAGE.
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Using Angle Grinders SWMS No. 8 Authorized and email Signed by the
More informationASTC210 (SQA Unit Code - F4PS 04) Clean confined spaces
Overview This unit is about maintaining levels of cleanliness in confined spaces. When working in confined spaces it is important to be vigilant against possible hazards and risks that may arise during
More informationConfined Space Program
Insert City Name Page 1 of 6 Purpose Regularly, confined spaces must be entered for inspection, cleaning or repair. Such spaces can present unusual hazards such as lack of sufficient oxygen, special mechanical
More informationSafety, health and environment values that are expected of all persons who are working and visiting the Quattro Ports Port Kembla Grain Terminal,
Overview In accordance with the Quattro Ports Safety, Health and Environmental Policy - Safety First is paramount to Quattro Ports. Our employees and contractors are our most important asset and their
More information2.0 Management Systems and Documentation
SHE Rules BOW142.3 1.0 Introduction This document details the safety, health and environment rules that apply to anyone accessing Arqiva sites and describes the standards of performance expected. This
More informationSASOL LIFE SAVING RULES (LSRs)
SASOL LIFE SAVING RULES (LSRs) Zero harm by following Life Saving Rules Adhere to fall protection requirements at all times when WORKING AT HEIGHTS Obey all traffic rules while driving and walking for
More informationUETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE
UETTDRRF06B PERFORM RESCUE FROM A LIVE LV PANEL LEARNER GUIDE TABLE OF CONTENTS Review Log... 4 Module Basis... 4 1.1 Introduction... 5 1.2 Identify And Control Risks And Hazards... 6 1.2.1 Risk Management...
More informationSafe Work Practices / Procedures / Instruction CONFINED SPACE
CONFINED SPACE Entry into and work in a confined space poses health and safety problems which may include: Presence or possible build up of a hazardous atmosphere Unexpected movement of equipment or materials
More informationWORK METHOD STATEMENT STRUCTURAL STEEL
ORGANISATION DETAILS Organisation Name: Gedoun Constructions Pty Ltd Contact Name: Joe Gedoun ACN/ABN: 52 284 873 581 Contact Position: Director Address: PO Box 1138, Townsville QLD 4810 Contact Phone
More informationEVENT SAFETY RISK ASSESSMENT - (SMALL TO MEDIUM SIZED COMMUNITY EVENTS) 1
EVENT SAFETY RISK ASSESSMENT (SMALL TO MEDIUM SIZED COMMUNITY EVENTS) EVENT SAFETY MANAGEMENT INFORMATION SHEET September 2010 #3 RISK ASSESSMENT IT S A MUST The success of your event is measured in many
More informationA Checklist for a Health and Safety Risk Assessment
A Checklist for a Health and Safety Risk Assessment Business Information Factsheet BIF376 July 2016 Introduction All employers, and certain self-employed workers and contractors, are required to assess
More informationSection 4. Fundamentals of Accident/Incident Prevention. Accidents/Incidents are Preventable
Fundamentals of Accident/Incident Prevention Accidents/Incidents are Preventable Many people believe that accidents are the inevitable result of unchangeable circumstances, fate, or a matter of bad luck.
More informationApplication 15.1 This Part applies to every workplace where a worker works in a confined space.
PART 15 CONFINED SPACES GENERAL REQUIREMENTS Application 15.1 This Part applies to every workplace where a worker works in a confined space. Safe work procedures 15.2(1) An employer must (a) develop and
More informationHEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT
HEALTH & SAFETY ARRANGEMENTS FOR MANAGEMENT OF WORK AT HEIGHT INTRODUCTION Cwmni CYNNAL recognises that accidents can arise from working at height. Falls from height can be a cause of injury and absence
More informationPromotion of Safety. Chapter 10 Intro to HST
Promotion of Safety Chapter 10 Intro to HST Using Body Mechanics Unit 1 Prevent strain and help maintain muscle strength Prevent injury to yourself and others Reasons for Using Body Mechanics Muscles work
More informationHealth & Safety Contractor rules
Health & Safety Contractor rules Contents 1. Introduction... 1 2. The legal bit explaining our terminology... 1 2.1 Legal requirements... 1 3. Our health and safety requirements... 1 3.1 Access to BT premises...
More informationValley View Copy Shop: POLICIES & PROCEDURES
EMPLOYERS RESPONSIBILITIES Valley View Copy Shop is responsible for providing a safe environment free from discrimination and sexual harassment. EMPLOYEES RESPONSIBILITIES All employees are responsible
More informationYou must NOT touch any equipment unless you are authorised to work on or with that equipment and you have followed correct safety procedures.
SYDNEY TOWN HALL 1 HIRER & CONTRACTOR SAFETY FACT SHEET Issue 2 September 2013 www.sydneytownhall.com.au City of Sydney - Venue Management will provide and maintain a safe working environment for the health,
More informationASPEC Engineering HSE Management System. Work Instruction. 1 Objective. 2 Working in confined spaces. 2.1 What is a confined space?
1 Objective This work instruction has been developed to abide by the WHS Regulations (2011) and AS/NZ 2865 Safe working in a confined space. It has been developed around Hadden s typology for risk management,
More informationSafety Essentials. Mandatory rules for our high risk activities
Mandatory rules for our high risk activities Remember... Only undertake activities for which you are trained, competent and authorised to do Before you start a job take a step back, think about all the
More informationCIVIL INFRASTRUCTURE HEALTH, SAFETY, AND ENVIRONMENT Describe protection of health, safety and environment in the civil infrastructure industry
1 of 8 level: 3 credit: 7 planned review date: October 2006 sub-field: purpose: Civil Works and Services This unit standard is a component of the selfregulation system for operations in the civil infrastructure.
More informationPLANT/EQUIPMENT/ASSET HAZARD REPORT
Asset Description: EL-08001-011 : Harrison 550 CNC Lathe Large Sale Type For what use is this asset being sold? Re-Use þ Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other
More informationLenzing Life Saving Rules
Lenzing Life Saving Rules Bringing Safety Home As we strive to become the safest business amongst our peers, we have discovered that our perception of our safety appears to be skewed. In reality our safety
More informationHealth & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review 1.1 Approved 10.01.2017 David Maine
More informationAppendix C Health and Safety Guidelines for investigators
38 Appendix C Health and Safety Guidelines for investigators Introduction Investigations must be conducted in a safe manner. This document provides an overview of the health and safety guidelines investigators
More informationWaste Industry Safety & Health
Waste Industry Safety & Health A practical pocket guide for the Waste industry Supported by: Delivering the Solution Together Introduction The Waste Industry Safety and Health (WISH) forum is supporting
More informationRISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992
RISK ASSESSMENT A UNIVERSITY GUIDE TO PRACTICAL RISK ASSESSMENT UNDER THE MANAGEMENT OF HEALTH AND SAFETY AT WORK REGULATIONS 1992 PERSONNEL DIVISION REVIEWED AUTUMN 1999 CONTENTS Page 1 INTRODUCTION 1
More informationRecommended Facilitator Notes: (read the following text out-loud to participants while showing this slide)
Slide 1 Confined Space Entry for General Industry These materials have been developed based on applicable federal laws and regulations in place at the time the materials were created. The program is being
More informationCollision Repair Shop Inspection Checklist
Collision Repair Shop Inspection Checklist Note: This is a sample inspection chesklist only, and may mot include all appropriate inspection items. The Occupational Health and Safety Regulation specifies
More informationWHS OHS HAZARD REGISTER (SITE AND OFFICE OPERATIONS)
WHS 017 - WHS 017 Hazard Register - Version 5.0 April 20 Doc No: WHS 017 Effective Date: 04/04/20 1 WORKING WITH EARTHMOVING PLANT/ TRUCKS/SITE VEHICLES COLLISIONS OTHER PLANT EQUIPMENT SITE VEHICLES PERSONNELL
More informationPOLICY FOR COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) POLICY
POLICY FOR COSHH (CONTROL OF SUBSTANCES HAZARDOUS TO HEALTH) POLICY Written By: Nursery Manager Date approved by Directors: Signature: Date for Review: November 2018 COSHH (CONTROL OF SUBSTANCES HAZARDOUS
More informationPLANT/EQUIPMENT/ASSET HAZARD REPORT
Asset Description: EL-09100-060 : Gantry hoist system Sale Type For what use is this asset being sold? Re-Use Spare Parts Scrap Note 1: Assets are sold only for the use indicated. Any other use is at the
More informationNZQA registered unit standard 1178 version 7 Page 1 of 6
Page 1 of 6 Title Follow safe practices in an electrical workplace Level 2 Credits 3 Purpose This unit standard covers general safety practices for workers in the electrical and related industries. People
More informationCode of Practice and Instructions to Contractors Working for Viridor
Date of issue: 20 Code of Practice and Instructions to Contractors Working for Viridor Prepared by: Ian Powell Head of Safety Management 4.6.3 Revision: 2.0 Contents Introduction... 2 Legal obligations...
More informationFaculty/School: Pharmacy Initial Issue Date: Oct 2016
Use this form to assist you to complete risk assessments for hazardous activities and processes. Any serious or ongoing hazards should be reported via RiskWare to ensure that appropriate corrective actions
More information(2) but does not include a shaft, trench or tunnel that is a mine or is part of the workings of a mine.
Health and Safety Procedure - Confined Spaces Section 1 - Background and Purpose (1) Confined spaces are, for the purposes of this procedure, defined as the following which is the definition under the
More informationHazard Management Making your workplace safer
Hazard Management Making your workplace safer A Guide to Hazard Identification, Risk Assessment, Control and Reviewing 1 What is a hazard? A hazard is something which has the potential to harm the health,
More informationHealth and Safety Program Inspections
POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites
More informationBased on market capitalization (in U.S. dollars) at December 31, 2015.
total.com Total is the world s fourth-ranked international oil and gas company (1) and a global leader in solar energy through our affiliate SunPower. We discover, produce, transform, market and distribute
More informationNew Employee Safety Orientation. Presented by: Risk Management Services 2419 Cockrell, Dallas TX (972)
New Employee Safety Orientation Presented by: Risk Management Services 2419 Cockrell, Dallas TX 75215 (972) 925-4050 Welcome to a Culture of Safety! We want to help you work safely so you go home to your
More informationMeet Today s Webinar Team
Meet Today s Webinar Team Moderator: Stacy Rose, CSP Stacy is a certified professional with 16 years experience in workplace safety. Stacy holds a bachelor s in industrial engineering and a master s in
More information??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
More informationCalifornia Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM
California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM OF: POLICY AND RESPONSIBILITY: We are committed to maintaining an injury and illness free workplace. Accordingly we have adopted
More informationHSE guidelines. SMay 2015 ELECTRICAL SAFETY HSE LIFE THE NATIONAL OIL&GAS INDUSTRY STANDARD FOR PROFESSIONALS
HSE guidelines SMay 2015 ELECTRICAL SAFETY HSE LIFE THE NATIONAL OIL&GAS INDUSTRY STANDARD FOR PROFESSIONALS Work safely or do not work at all There are strict procedures when working on electrical installations
More informationRecognition, Evaluation, and Control of Hazards
Recognition, Evaluation, and Control of Hazards Latest revised date: October 26, 2011 Page 1 of 8 1.0 Introduction Memorial University has established a system for the recognition, evaluation, and control
More informationContents NEW SOUTH WALES DEPARTMENT OF CORRECTIVE SERVICES. Employee Occupational Health & Safety Handbook
Contents NEW SOUTH WALES DEPARTMENT OF CORRECTIVE SERVICES Employee Occupational Health & Safety Handbook October 2008 Introduction 1 Consultation 2 Site OHS Plans 3 Site OHS Procedures 4 OHS Responsibilities
More informationOperation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015
Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039 Name Date Signature Author Jarred Hearle 27/11/2015 Reviewed FMG Site Team 27/11/2015 ---------- Approved Geoff Selfe 27/11/2015
More informationHow severely could the risk hurt someone?
Safe Work Method Statement No: WMS-08 Task: Install Drainage This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationHAZARD RECOGNITION EVALUATION and CONTROL
What is a hazard? HAZARD RECOGNITION EVALUATION and CONTROL Hazard - a dangerous object, event, behaviour or condition (in the workplace) which has the potential to cause injury, illness or property damage.
More informationSAFETY TRAINING LEAFLET 02 BASIC RULES FOR SAFETY AND GOOD HOUSEKEEPING
SAFETY TRAINING LEAFLET 02 BASIC RULES FOR SAFETY AND GOOD HOUSEKEEPING Doc 23.02/18 EUROPEAN INDUSTRIAL GASES ASSOCIATION AISBL AVENUE DES ARTS 3-5 B 1210 BRUSSELS Tel: +32 2 217 70 98 Fax: +32 2 219
More informationIsolation Lockout and Tagging
PURPOSE To define the minimum system requirements for isolation of plant and equipment from hazardous substances, mechanical, electrical or other energy sources to protect all workers from personal injury
More informationHealth & Safety and Employment Law
Health & Safety and Employment Law Manual Handling Health and safety training for employees The definition of Manual Handling The transporting or supporting of a load, including the lifting, putting down,
More informationSafety Orientation OSHA 5(a)(1) General Duty Clause SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE SCOPE
SAFETY ORIENTATION OSHA Section 5(a)(1) PURPOSE Preventing injuries in the workplace is a primary consideration for Millard. An orientation program has been developed to introduce employees to the warehousing
More informationBuggy Policy Document Date: 10 November 2017
Buggy Policy Document Date: 10 November 2017 Cavendish Golf Club recognises that it has a duty of care to the staff, members and guest users of the golf course. The topography and nature of the course
More informationWho Wants To Be a MEWP Millionaire?
Who Wants To Be a MEWP Millionaire? The employer has a responsibility to provide: A Modifications to equipment B Exemption in respect to training if required C Information, instruction, training and supervision
More informationCONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA
RECOMMENDED ADDITIONAL CONTROLS TASK / ACTIVITY/ EQUIPMENT/ FACILITY HAZARDS UNWANTED EVENT MINIMUM CONTROLS REQUIRED RISK NO. LIKELI-HOOD CONSE-QUENCE RISK VALUE Project Risk Assessment Page 1 of 16 All
More informationConfined Spaces. This procedure applies to all workers of the Diocese of Maitland Newcastle (DoMN).
Purpose To provide guidance in controlling the risks associated with confined spaces including identifying confined spaces, working in a confined space and issuing confined space entry permits. Scope This
More informationOperating Instructions - Rescue Equipment. RAM Support LRS-T EN Edition (translation of the original operating instructions)
Operating Instructions - Rescue Equipment RAM Support LRS-T 174190085 EN Edition 08.2017 (translation of the original operating instructions) Content Page 1. Hazard classes 3 2. Product safety 4 3. Intended
More informationStandards of Practice Personal Protective Equipment
Document Authority: I. PURPOSE Standards of Practice Personal Protective Equipment Whenever feasible, hazards must be eliminated through engineering, and/or administrative controls, prior to resorting
More informationNew Employee Safety Orientation. Session Objectives. Session Objectives (cont.)
New Employee Safety Orientation Session Objectives Understand your role in safety and security Get safety information Identify and report safety hazards Prevent and respond to fires Respond to accidents
More informationPromotion of Personal Safety: Chapter 11
Promotion of Personal Safety: Chapter 11 Using Body Mechanics Reasons for using Proper Body Mechanics: Muscles work best when used correctly Makes lifting, pulling, and pushing easier Prevents unnecessary
More informationThis written Compressed Gas Plan is kept at the corporate office and in the written Safety & Health Program.
Safety & Health Program 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 Compressed Gas Plan Purpose It is the policy of EMA to permit only trained and authorized
More informationInspecting a motorsport vehicle during a competition
Unit 057 Inspecting a motorsport vehicle during a Level: 2 Credit value: 14 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to inspect
More informationSAFE WORK METHOD STATEMENT SWMS No Version
SAFE WORK METHOD STATEMENT SWMS No Version Company Name: Hunter Readymixed Concrete Pty Ltd 00 004 Location: Thornton Cessnock Tea Gardens Gateshead ABN: 6 076 08 695 SWMS Developed By: Duane Harrison
More informationHow severely could the risk hurt someone? Low/Insignificant First aid
Safe Work Method Statement No: WMS-0 Task: Line Marking This WMS is submitted to: Project name and site address: Contact: Preparation of WMS by: Robert Raams Company: Enwon (Australia) Pty Ltd Authorised
More informationWorking safely in an engineering environment
Unit 001 Working safely in an engineering environment Level: 2 Credit value: 5 NDAQ number: 500/9514/6 Unit aim This unit covers the skills and knowledge needed to prove the competences required to work
More informationMeuangvang Development Co.LTD Standard Working Procedure 058 Use of Hydraulic Torqueing Devices
1. Application To provide a standard work procedure for as required in accordance with Meuangvang Development Co Ltd Safety Management Program 2. Revision Schedule Rev # Old Section Ref New Section Ref
More informationCONSTRUCTION SAFETY PROGRAM FOR. Golder Acoustics Inc.
CONSTRUCTION SAFETY PROGRAM FOR Golder Acoustics Inc. TABLE OF CONTENTS Topic... Page Safety and Health Policy... 2 Safety and Health Objectives... 3 Job Site Inspections... 4 Contractor Safety Administrator...
More informationPRO Lifting Operations
MS&L Procedure PRO-4.5-0001-1-06 Lifting Operations Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN THE SAFE USE AND OPERATION OF MOBILE ELEVATED WORK PLATFORMS
NPTC Registered Charity No. 1096429 NATIONAL AGRICULTURAL CENTRE STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7669 6553 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE
More informationSafe Working at Heights Theory Assessment
Safe Working at Heights Theory Assessment Version 4.00 Safe Working at Heights Theory Assessment This Theory Assessment will form part of the formal assessment for the following unit/s of competency: RIIWHS204D
More informationSafety Powder Spray Systems
Instruction Sheet P/N 107 952C Safety Powder Spray Systems 1. Introduction This section contains general safety instructions for using your Nordson equipment. Task- and equipment-specific warnings are
More informationSAFETY INDUCTION. Intro
SAFETY INDUCTION The Dowerin GWN7 Machinery Field Days will be returning to the Dowerin Show Grounds on Wednesday 24th Thursday 25 th of August 2016. It is a requirement that the nominated representative
More information1 AIM 2 4 REASONS FOR INCLUSION 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6
CONTENTS PAGE 1 AIM 2 2 APPLICATION 2 3 DEFINITIONS 2 4 REASONS FOR INCLUSION 3 5 REQUIREMENTS 3 6 PLANT AND EQUIPMENT REQUIREMENTS 4 7 SYSTEM AND PROCEDURAL REQUIREMENTS 4 8 PEOPLE REQUIREMENTS 6 APPENDIX
More informationTENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE
TENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE This questionnaire forms part of the SANBI tender evaluation process and is to be completed by tenderers and submitted with
More information