R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid
|
|
- Benedict Barrett
- 5 years ago
- Views:
Transcription
1 R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () Fax +33 () FEATURES High pressure regulator for cylinder or manifold; standard version inlet pressure up to bar (319 psi), higher pressure for special versions. Inlet cylinder connections according to UNI standard, other connections available on request. Outlet pressure up to 15 bar (18 psi) is controlled by a stainless steel diaphragm (AISI 316); greater outlet pressures are controlled by a piston. The external chrome-plated finish and the stainless steel diaphragm make the R133 series suitable for laboratory and gas analysis applications, as well as for normal industrial applications. Available the ATEX version Brand IIGDcIICX. For use in potentially explosive atmospheres zones: 1, 1,, (not for mines and zone ). The product complies with the directive 97/3/CE (PED).
2 SPECIFICATIONS Inlet and outlet pressure gauges: accuracy class 1.6, G 1/ ports Diaphragm version regulator weight: ~, kg (~5.9 lb) Piston version regulator weight: ~,9 kg (~6.39 lb) Standard version operating temperature - C +6 C (- F 1 F) Main valve leakage classification: VI (bubble tight) Flow coefficient: Kv=.5 Nm3/h (Cv =.6 US gal/min) Degree of protection: IP5 MATERIALS Body and bonnet: brass, chrome-plated outside Internal parts: OT58 brass Main valve spring: stainless steel AISI 3 Adjusting spring: C85 (not in contact with the fluid) Diaphragm (for outlet pressure up to 15 bar): - standard: stainless steel AISI for liquid and air relieving: two coupled diaphragms NBR+PTFE, PTFE in contact with the fluid Piston (for greater outlet pressure): brass O-ring: EPDM or FPM according to the fluid (other compounds available on request) Main valve gasket: PA 6.6 (EPDM for maximum operating pressure Ps 15 bar) ACCESSORIES Panel mounting ring-nut: DU81 Wall mounting bracket and ring-nut: M1B Not standard inlet and outlet connections G 1/ connections to pipe bonnet and overpressure valve, in case of use of dangerous fluid Overpressure relieving function (for compressed only) SPARE PARTS Gauges Overpressure valve Complete kit: filter, complete main valve, o-rings, assembled diaphragm
3 flow charts 5 R133 Pin=17 bar Pout 3 3 bar Azoto/Nitrogen R133 Pin=17 bar Pout 1,5 15 bar Azoto/Nitrogen R133 Pin= bar Pout 1,5 15 bar Aria/Air
4 available model types TYPE PIn Bar Pout Bar Connection OUT MEDIUM R133 R133 LA 15, 1,5 G 1/-F CH R133 MA 8,8 8 G 1/-F C NO R133 MB 8 1,5 15 G 1/-F C NO R133 MC G 1/-F C NO R133 MD G 1/-F C NO R133 HA,8 8 G 1/-F R133 HB 1,5 15 G 1/-F R133 HC 3 3 G 1/-F R133 HD 5 5 G 1/-F R133 HE G 1/-F R133 HF G 1/-F MEDIUM Connection IN UNI Bracket bottle 7S-UNI 111 CH Manifold connection 1H-UNI 111 7F-UNI 111 C _manifold NO 9-UNI 111 Manifold _manifold Air 6-UNI 111 Manifold N Ar He 5-UNI UNI 111 Manifold Manifold _manifold 1H-UNI 111 CONNECTION DIFFERENT FROM STANDARD Connections different from standard (G 1/-F in body, external nipples 1/'' NPT-F 1/'' NPT-M) connection different from italian standard UNI (DIN 77, CGA, NFE 9-65, BS 31 e UNE ITC MIE) EXECUTIONS DIFFERENT FROM STANDARD Inlet pressure 5-3 bar Execution for liquid Inlet pressure 35- bar Dome loaded version Pre-set outlet pressure with T screw Not standard branding Fixed outlet pressure, screw with cap nut ATEX version O-ring in accordance to FDA Special temperature range O-ring in FPM Relieving version Special O-ring Degreased for Venting on bonnet and over pressure valve ACCESSORIES Chrome-plated ring nut DU81 Kit bracket and ring nut M1B Ø8 hose-tail composed of : Ø8 hose-tail P55113 Nut 3/8 P8113 Connection P98113 O-ring 7 GABC71
5 technical drawings (all dimensions in mm) TYPE ~H Diaphragm 138 Piston G1/ H Ø3 Ø69 ~17 ~85 FLOW Connection L MAX Bracket and ring-nut to be ordered separately ~17 ~85 Ring-Nut M35x1,5 FLOW G1/ Ø6 9 Ø8 76 L 5 BRACKET TYPE ~L Diaphragm 6 Piston L MAX 6 = = ~165 5
R300 HELYON. Brass high pressure regulator, for compressed air, gas and liquids
HELYON 5 Chemin du Jubin 69570 DARDILLY Tél. +33 (0)4 72 52 16 70 - Fax +33 (0)4 72 52 16 71 R300 Brass high pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet
More informationR133. Brass high pressure regulator, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R133 Brass high pressure regulator, suitable for compressed air, gas and liquid FEATURES
More informationR123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid
R123 R123/34 brass Brass pressure regulator, for compressed air, gas and liquid FEATURES Pressure regulator for inlet pressure up to 50 bar (725 psi) in the standard version. Connection ports. R123 1 -F
More informationR128. Brass pressure regulator, for compressed air, gas and liquids FEATURES
R128 Brass pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator for inlet pressure up to 30 bar (435 psi) in the standard version. Connections 2 -F by flanges screwed to
More informationR3133. Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R3133 Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas
More informationR114-R138-R112-R121. Brass pressure regulator, for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R114-R138-R112-R121 Brass pressure regulator, for compressed air, gas and liquid FEATURES
More information3P0R2. Stainless steel AISI 316L dome loaded pressure regulator, for compressed air, gas and liquid FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com 3P0R2 Stainless steel AISI 316L dome loaded pressure regulator, for compressed air, gas
More informationR128. Brass pressure regulator, for compressed air, gas and liquids FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R128 Brass pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator
More informationR114-R138-R112-R121. Brass pressure regulator, for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R114-R138-R112-R121 Brass pressure regulator, for compressed air, gas and liquid FEATURES
More informationR3300. Stainless steel AISI 316L high pressure regulator for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R3300 Stainless steel AISI 316L high pressure regulator for compressed air, gas and liquid
More informationR12MD R38MD. Modular regulators, suitable for compressed air FEAURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R12MD R38MD Modular regulators, suitable for compressed air FEAURES Diaphragm pressure
More informationR128. Brass pressure regulator, for compressed air, gas and liquids FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R128 Brass pressure regulator, for compressed air, gas and liquids FEATURES Pressure regulator
More informationFR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi).
FR12MD FR38MD Modular filter-regulators, suitable for compressed air FEATURES Filter-regulator for inlet pressure up to 30 bar (435 psi). Inlet and outlet connections 1/2 F and 3/8 F in the body. Outlet
More informationR Stainless steel AISI 316L high pressure regulator, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R31000 Stainless steel AISI 316L high pressure regulator, suitable for compressed air,
More informationR10MD-R34MD-R11MDL-R15MDL
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R10MD-R34MD-R11MDL-R15MDL Modular pressure regulator, suitable for compressed air FEATURES
More informationR123 R123/34 brass. Brass pressure regulator, for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R123 R123/34 brass Brass pressure regulator, for compressed air, gas and liquid FEATURES
More informationMedium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com Medium pressure relief valve AISI 316L Stainless steel AISI 316L relief valves, suitable
More informationVSF3114 VSF3138 VSF3121 VSF3121/34
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com VSF3114 VSF3138 VSF3121 VSF3121/34 Stainless steel AISI 316L relief valves, suitable for
More informationR14 MC R18 MC Aluminium
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R14 MC R18 MC Aluminium Aluminium micro pressure regulator, for compressed air, gas and
More informationFR12MD FR38MD. Modular filter-regulators, suitable for compressed air FEATURES. Filter-regulator for inlet pressure up to 30 bar (435 psi).
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com FR12MD FR38MD Modular filter-regulators, suitable for compressed air FEATURES Filter-regulator
More informationQM Dual inlet modular decompression unit FEATURES
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com QM 1100 Dual inlet modular decompression unit FEATURES Single stage decompression unit
More informationR126/DN100-R126/DN80 LL
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R126/DN100-R126/DN80 LL Aluminium pressure regulator, for non corrosive gas FEATURES Pressure
More informationVSF3133-VSF31100-VSF31200
Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com VSF3133-VSF31100-VSF31200 Stainless steel AISI 316L high pressure relief valves, suitable
More informationCalibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New
> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,
More informationPremium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
More informationFILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel 316L Compact 1/4, High Flow 1/4-1/2
FILTER, REGULATOR AND FILTER/REGULATOR Stainless Steel L Compact /, High Flow / - / Air service equipment Series FEATURES Stainless Steel filter, regulator and filter regulator intended for corrosive environment
More informationPRESSURE REGULATORS AND FLOWMETERS, ALL MEDICAL GASES
PRESSURE REGULATORS ALL MEDICAL GASES In this section we propose our pressure regulators (FM series, MU and MERCURY ) and our Rs flowmeters for applications other than oxygen therapy (presented in the
More informationTECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS THE COMPANY ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and
More informationTECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS
TECHNICAL CATALOGUE PRESSURE REDUCING VALVES EUROPRESS ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution
More informationTHE MF-400 SERIES. Operating and Service Manual. Series includes all variants of MF-400/401
THE MF-400 SERIES Operating and Service Manual Series includes all variants of MF-400/401 Issue A October 2013 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More informationSG1 Series Regulators - Pressure Reducing
SG1 Series Regulators - Pressure Reducing DSG131X Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-; ASME B31; ASME BPVC
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationRelief Valves. Relief Valves. International, Inc. Company ACIRCOR. RS Differential NB 9.5mm. RVA In-line Differential NB 6 to 19mm
s s RS Differential NB 9.5mm RVA In-line Differential NB 6 to 19mm RV Direct Acting NB up to 9mm LPR Low Pressure Differential NB 8mm We design, machine, build and test all our products on one site in
More informationTHE HF-300 SERIES. Operating and Service Manual. Series includes all variants of HF-300/301
THE HF-300 SERIES Operating and Service Manual Series includes all variants of HF-300/301 Issue A July 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 3.1. Spring Loaded...
More informationPRO-50 Instrument Supply Regulator
Features CRN Approved The PRO-50 Regulator has been granted a Canadian Registration Number. Sour Service Capability Available in NACE configurations that comply with NACE MR0175/MR0103. Environmental limits
More informationPilot HON 625. Entwurf. Product information. serving the gas industry worldwide
Pilot HON 62 Entwurf Product information serving the gas industry worldwide Pilot HON 62 Application, characteristics Application Pilot for the gas pressure regulator HON 02 Pilot for outlet pressure control
More informationTHE BP-301 SERIES. Operating and Service Manual. Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv)
THE BP-301 SERIES Operating and Service Manual Series includes all variants of BP-301 (LF 0.1Cv / MF 0.5Cv) Issue B October 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation...
More informationDescription Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
More informationVALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL PRV44 Pressure Reducing Valve PRV44 - Operation and Installation - 1 - manual PRV44-16-ENG JULY 2016 INDEX PAGE 1 IDENTIFICATION PLATE
More informationPressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
More informationShut-off ball valve Type GBC
Data sheet Shut-off ball valve GBC shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas lines in
More informationSPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationALE-40. R06 Miniature Brass Body Regulator. Water and Compressed Air Service 1/8" and 1/4" PTF Port Sizes. Air line equipment.
Air line equipment R Miniature Brass Body Regulator Water and Compressed Air Service 1/" and 1/" PTF Port Sizes Compact design, corrosion resistant construction Brass body with choice of plastic or brass
More informationVALFONTA INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2
INSTRUCTIONS: OPERATION AND INSTALLATION PRESSURE REDUCING VALVE MODEL M2 Pressure Reducing Valve M2 - Operation and Installation - 1 - M2-13E-ENG FEBRUARY 2017 ÍNDICE PÁGINA 1 IDENTIFICATION PLATE LEGEND
More informationSG3 Series Regulators - Pressure Reducing
SG3 Series Regulators - Pressure Reducing DSG333X1 Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-4; ASME B31; ASME BPVC
More informationSeries MX pressure regulators 3/
CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges
More informationCompact Regulator. ARX20 Series. 2.0 MPa compatible, piston type compact regulator ARJ
Compact Regulator 2 Series 2. MPa compatible, piston type compact regulator V SR X AP1 Compatible with inlet supply pressure of 2. MPa Employs a knob shape for easy operation Compact type (face to face
More informationSG2 Series Regulators - Pressure Reducing
SG2 Series Regulators - Pressure Reducing DSG2232X Specifications For questions about this product, please consult TESCOM. OPERATING PARAMETERS Pressure rating per criteria of CGA E-; ASME B31; ASME BPVC
More informationType ACE97. Introduction. Installation. P.E.D. Categories. Specifications. Overpressure Protection. Installation Guide English May 2002
Installation Guide English May 2002 Type ACE97 Introduction This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact
More informationFlow control valves Series RFU - RFO 2/
CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5
More informationMEDICAL CYLINDER VALVES
MEDICAL CYLINDER VALVES 3 1 Medical integrated valve for oxygen air and medical mixture 1.1 ALIONE 1.2 ALPINOX-valve 1.3 ALPINOX-valve compact 2 Cylinder valve with RPV for oxygen and medical gases -
More informationINSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION
INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic
More information4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
More informationGas Pressure Regulator HON 200
Product information serving the gas industry worldwide Applications, characteristics, technical data Application Gas supply to municipal, industrial and individual consumers Regulator for low-load rails
More informationB74G - EXCELON Modular System General purpose filter/regulator
> Port size: /8... / (ISO G/PTF) > Excelon design allows in-line installation or modular installation with other Excelon products > Push to lock adjusting knob with optional tamper resistant accessory
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More informationSerie ECO 3T. Threaded end back flow preventer with controllable reduced pressure zone. made in. Application fields. Protection E U R O P E
Serie ECO T Threaded end back flow preventer with controllable reduced pressure zone BRANDONI made in E U R O P E Application fields WATER FIRE FIGHTING DRINKING WATER 74 www.brandoni.it Serie ECO T The
More informationPressure Equalising Valves Model , for Differential Pressure Gauges
Accessories Pressure Equalising Valves Model 910.25, for Differential Pressure Gauges WIKA Data Sheet AC 09.11 Applications T Isolating, pressure equalising as well as purging and air bleeding valves to
More informationTHE BP-690 SERIES. Operating and Service Manual. Series includes all variants of BP-LF/MF-690/691
THE BP-690 SERIES Operating and Service Manual Series includes all variants of BP-LF/MF-690/691 Issue B April 2015 1 TABLE OF CONTENTS 1. Description... 3 2. Installation... 3 3. Operation... 4 4. Special
More information1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
More informationSpecialty Gas Equipment Catalogue
THE HARRIS PRODUCTS GROUP The Harris Products Group was formed by combining two strong names in the welding business - Harris Calorific and J.W. Harris. The Harris Products Group is a world leader in metalworking
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationMaterials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
More informationSeries K Air service units G 1/8, G 1/4
Air service units G /8, G /4 Series FK Filter, G /8 G /4.02 Series RK Pressure regulator, G /8 G /4.04 Series FRK Filter/regulator, G /8 G /4.06 Series OK Lubricator, G /8 G /4.08 Series FROK Two piece
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More information1301 Series High-Pressure Regulators
Instruction Manual Form 1111 Types 1301F and 1301G March 2013 1301 Series High-Pressure Regulators! WARNING Failure to follow these instructions or to properly install and maintain this equipment could
More informationSi C132. Safety valves for pressure relief in accordance to PED, DIN/EN and ASME. Engineering GREAT Solutions
Safety valves for pressure relief in accordance to PED, DIN/EN and ASME Engineering GREAT Solutions Si C132 Features The universal compact safety valve > 3 body seat sizes for appropriate size selection
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationWelker Sampler. Model GSS-1. Installation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Sampler Model GSS-1 The information in this manual has been carefully checked for accuracy and is intended to be used as a guide to operations. Correct
More information2 I All-Flo Pump Co.
2 I All-Flo Pump Co. 3I All-Flo Pump Co. Model Designation Matrix PRODUCT SERIES PUMP SIZE FLUID CONNECTI INTERM INNER CHAM ON TYPE FLUID C HAMBER MANIFOLDS EDI A TE/ BER O-RINGS VAL VE SEAT VALVE/BAL
More informationMEGR-1912 Instruction Manual
MEGR-1912 PRESSURE REGULATOR Instruction Manual- Look Inside For: Description Installation Start-Up Maintenance Parts Ordering Parts List Marshall Excelsior Company Marshall, MI 49068 269-789-6700 FAX
More informationTank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
More information1805 Series Relief Valves
October 2011 1805 Series Relief Valves P1026 1805G Type 1805-2 Type 1805-4 Figure 1. Typical 1805 Relief Valves Introduction The 1805 Series relief valves are designed for use in farm tap applications
More informationWater valve Type WVO. Data sheet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Data sheet Water valve Type WVO Water valve type WVO is used for regulating the flow of water in refrigeration plant with water-cooled condensers. The water valve gives modulating
More informationAir service units series K G1/8, G1/4
Air service units series K Series FK Filter 12.011 Series RK Pressure regulator 12.012 Series FRK Filter/regulator 12.013 Series OK Lubricator 12.014 Series FROK Two piece air service unit 12.015 Series
More informationTechnical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
More informationMicroregulator 039 1/8-1/4
09/11/15 TECH DATA SHEET 675 Microregulator 1/8-1/4 Sensitive high performance model, high stability with low load losses and big flow rate. Downstream overpressures quickly eliminated. Can be wall mounted
More informationSafety Relief Valve HON 832
Safety Relief Valve HON 832 product information serving the gas industry worldwide Application, characteristics, technical data Application 2 As leak gas SRV with internal vent connection (function class
More informationUniversal Charging and Testing Unit FPU-1
1. DESCRIPTION 1.1. FUNCTION The charging and testing unit FPU-1 is used to charge accumulators with nitrogen or to check or to change the existing pre-charge pressure in accumulators. For this purpose
More informationARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI )
ARI-SAFE-SN ANSI Safety valve ANSI - safety valve Semi Nozzle (ANSI 150-300) ARI-SAFE-SN ANSI (Semi-Nozzle) ANSI-Safety Relief Valve Type-test approved acc. to ASME Code Section VIII-Division 1. UV-stamp
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More information756 Safety Relief Valves
756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both
More informationPrecision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
More informationArmatures for analytical probes
Armatures for analytical probes For many different types of installations and applications Large range of probe holders General purpose, water treatment, food & beverage, pharmaceutical applications Type
More informationexcellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES
excellence of Italian engineering Field adjustable PRESSURE RELIEF VALVES excellence of Italian engineering OUR MISSION: We started in 1960 as instrumentation manufacturers and we have increasingly specialized
More informationAnderson Greenwood Series 93 Positive Pressure POSRV Installation and Maintenance Instructions
Before installation these instructions must be fully read and understood Installation and maintenance instructions for Series 93 Positive Pressure Pilot Operated Safety Relief Valves (POSRV). The intent
More informationPilot valves for pilot operated servo valves
Data sheet Pilot valves for pilot operated servo valves The range of pilot valves consists of: Constant-pressure pilot valve, type CVP (LP) and CVP (HP) Differential-pressure pilot valve, type CVPP (LP)
More informationTank Blanketing Pressure Regulators RHPS Series
www.swagelok.com Tank Blanketing Pressure Regulators RHPS Series Types: pressure reducing and vapor recovery 16L stainless steel construction 1/2, 1, and 2 in. end connections Working pressures up to 22
More informationCash Valve TYPE KP PILOT OPERATED BACK PRESSURE VALVE. ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 9001 Certified
Cash Valve PILOT OPERATED BACK PRESSURE VALVE ISSUED - DECEMBER 2000 CAVMC-0518-US-0208 ISO 01 Certified KP HIGH CAPACITY PILOT OPERATED BACK PRESSURE VALVE DESCRIPTION The Cash Valve Type KP is a pilot
More informationPressure Reducing Valve DMV 755
Pressure Reducing Valve DMV 755 Nominal size DN 10 50 Nominal size 3/8 2 Nominal pressure PN 10 bar Features pressure setting range 1 to 9 bar control valve for reliable reduction of system pressures to
More informationInstruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X
Standard Surge Eliminator Standard 104052 - X Flushable 104053 - X - X Page 2 of 16 Issue: 2.3 Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 1.4 Fitting Selection - Standard
More information776 Cryogenic Safety Valve
776 Cryogenic Safety Valve INTRODUCTION 776 Cryogenic Safety Valve The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both plant
More informationGas Pressure Regulator HON 502
Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas
More informationG type DUCTED EXHAUST SAFETY VALVE 2871 AND 288X SERIES. Model/Ref:
Model/Ref: 28713 www.lauridsenindustri.com CHARACTERISTICS The G type safety valves are dedicated to protect the equipment from potential overpressure. They are automatic and close when the pressure conditions
More informationAVPQ/AVPQ-F, PN 16. Application
Data sheet Differential pressure and flow control AVPQ/AVPQ-F, PN 16 Application AVPQ is a self-acting differential pressure and flow control primarily for use in district heating systems. AVPQ closes
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationPressure relief valve DHV 712 DN 65-80: 0,5-10 bar, DN : 0,3-4 bar, DN 100: 0,5-6 bar
Pressure relief valve DHV 7 DN 5-80: 0,5-0 bar, DN 5-00: 0, - bar, DN 00: 0,5 - bar Advantage for high pressure stability reliable reduction of pressure peaks and pulsations pressure setting possible at
More informationOPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
More informationTypes 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators July 2010 W3716 W3507 Type 1808 Type 1808A Figure 1. Types 1808 and 1808A Pilot-Operated Relief Valves or Backpressure Regulators
More information