MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A

Size: px
Start display at page:

Download "MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A"

Transcription

1 INCH-POUND MS19D April 199 Superseding MS19C 18 July 198 MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-A This specification is approved for use by all Departments and Agencies of the Department of Defense. The requirements for acquiring the product described herein shall consist of this specification sheet and the issue of the following specification listed in that issue of the Department of Defense Index of Specifications and Standards (DoDISS) specified in the solicitation: FF-S-9. D Entire document revised AMSC N/A 1 of FSC 0 DISTRIBUTION STATEMENT A. Approve for public release; distribution is unlimited.

2 Table I. Dimensions and Numbers. D Nominal Size Threads Per Inch UNC-A D 1 Body Diameter A Head Diameter H Head Height REQUIREMENTS: Max Min Max Min Max Min P Head Radius Ref R Fillet Radius Max Driver Size 1 1 Tensile Strength Lbs-Min ,10 1,00,0,190,00 L Length Tolerance / / / 90 1/ 10 1/ / 91 1/ 10 1/ 119 1/ Indicates manufacturer s non-stock production items Inactive for new design after 18 July MATERIAL: Austenitic Corrosion-Resistant Steel screws shall be manufactured from Type 0 (UNS S000), Type 0 (UNS S000), Type 0L (UNS S00), Type 0 (UNS S000), Type 1 (UNS S100), Type 1L (UNS S10), Type 8 (UNS S800), or Type XM- (UNS S00) in accordance with chemical composition specified in QQ-S-. (See Material Identification Marking and Material Code).. FINISH: Passivate in accordance with QQ-P- or Black Oxide coating (except for Type 1 or Type 1L) in accordance with MIL-C-19, Class. (See Finish Code).. MECHANICAL PROPERTIES: The minimum tensile strength in load pounds, indicated for each size in Table I, is based on 80,000 PSI Minimum Tensile Strength. Load pounds are calculated by the stress areas indicated in FED-STD-H8/. The yield strength, based on. percent offset, shall be 0,000 psi minimum.

3 Requirements: (Continued) MS19D. MAGNETIC PERMEABILITY: When specified, screws shall have a magnetic permeability of less than.0 maximum (air = 1.0) for a field strength H=00 Oersteds using a magnetic permeability indicator per ASTM A. Note: Cold working screws may not be capable of meeting permeability and strength requirements simultaneously.. THREADS: Screw threads shall be Unified external threads Class A UNC in accordance with FED-STD- H8/. Acceptability of screw threads shall be in accordance with FED-STD-H8/0. Threads shall extend to within two threads or less of the bearing surface of the head, except that all lengths over.000 inches shall have a minimum complete thread length of 1.0 inches.. RECESS: Recess shall be in accordance with MS900.. MATERIAL IDENTIFICATION MARKING: Type 1 (UNS S100) or Type 1L (UNS S10) CRES screws nominal size #10 (.1900) and larger shall be permanently marked 1. Markings shall be raised or depressed on the screw head at manufacturer s option. 8. MATERIAL CODE: For 00 Series CRES - No code after dash number indicates any 00 Series Austenitic Corrosion-Resistant Steel listed in material requirement For Type 1 or Type 1L CRES - S1 after dash number indicates Austenitic Corrosion- Resistant Steel Type 1 or Type 1L. 9. FINISH CODE: Passivate - No code letter after dash number, or after material code (if applicable) indicates passivate. Black Oxide - B after dash number, (not available for Type 1 or Type 1L CRES), indicates black oxide coating. 10. PART NUMBER: The part number shall consist of the basic MS number, followed by a dash number from Table I, a material code (if applicable), and a finish code (if applicable). Examples: MS19-1 indicates Screw, Machine-Pan Head, Cross-Recessed, Optional 00 Series CRES, Passivated;.080- UNC-A Nominal Thread Size,.1 Length MS19-1B indicates Screw, Machine-Pan Head, Cross-Recessed, Optional 00 Series CRES, Black Oxide Coated;.080- UNC-A Nominal Thread Size,.1 Length MS19-1S1 indicates Screw, Machine - Pan Head, Cross-Recessed, Type 1 or Type 1L CRES, Passivated;.080- UNC-A Nominal Thread Size,.1 Length NOTES: 1. All dimensions are in inches.. Interpret drawing in accordance with ASME Y1.M.. In the event of a conflict between the text of this document and the references cited herein, the text of this document shall take precedence.. Unless otherwise specified, issues of referenced documents are those in effect at the time of solicitation.. MS19 Pan Head Machine Screws manufactured prior to April 199 may be used until stock is depleted.

4 The screws covered by dash numbers given in MS100, MS1, MS, AN1 in part and AN in part are canceled/inactive after the dates indicated on the documents. Use the dash numbers given in the preceding sheets. The canceled screws cannot always replace the new screws and should be used until existing stock are depleted. Use only the new screws for design and replacement. Replacement should be in accordance with this table. Table II. Interchangeability CROSS REFERENCE OF PART NUMBERS CANCELED NEW MS100 MS MS1 AN1 AN MS CR CR CR CR CR CR CR8 CR10 CR1 CR thru CR1 CR CR CR CR CR CR8 CR10 CR1 CR1 CR1 CR18 CR0 CR CR CR CR8 CR thru CR8 CR CR CR CR CR CR8 CR10 CR1 CR1 CR1 CR18 CR0 CR CR CR CR8 CR0 CR CR DASH NUMBER C- C- C- C- C- C- C-8 C-10 C-1 C- thru C-1 C- C- C- C- C- C-8 C-10 C-1 C-1 C-1 C-18 C-0 C- C- C- C-8 C- thru C-8 C- C- C- C- C- C-8 C-10 C-1 C-1 C-1 C-18 C-0 C- C- C- C-8 C-0 C- C- CR CR CR CR CR8 CR9 CR10 CR1 CR1 CR1 CR18 CR0 CR CR CR CR8 CR0 CR CR CR0 C-0 CR0 CR CR8 1/ New dash numbers added August 198 No replacement C- C- C- C- C-8 C-9 C-10 C-1 C-1 C-1 C-18 C-0 C- C- C- C-8 C-0 C- C- C-0 C- C / 1 1/ / 1 1 1/ 1 1/ 8

5 Table II. Interchangeability (Continued) CROSS REFERENCE OF PART NUMBERS CANCELED NEW MS100 MS MS1 AN1 AN MS C8R C8R C8R C8R C8R8 DASH NUMBER C8- C8- C8- C8- C8-8 C8R C8R C8R C8R C8R8 C8- C8- C8- C8- C C8R10 C8R1 C8R1 C8R1 C8R18 C8R0 C8R C8R C8R C8-10 C8-1 C8-1 C8-1 C8-18 C8-0 C8- C8- C8- C8R9 C8R10 C8R1 C8R1 C8R1 C8R18 C8R0 C8R C8R C8R C8-9 C8-10 C8-1 C8-1 C8-1 C8-18 C8-0 C8- C8- C8-1 1/ / / C8R8 C8R0 C8R C8R C8R0 C8R C8R8 C10R C10R C10R C10R C10R8 C10R10 C10R1 C10R1 C10R1 C10R18 C10R0 C10R C10R C10R C10R8 C10R0 C10R C10R C10R0 C10R C10R8 C1R C1R C1R C1R8 C1R10 C1R1 C1R1 C1R1 C1R18 1/ New dash numbers added August 198 No replacement C8-8 C8-0 C8- C8- C8-0 C8- C8-8 C10- C10- C10- C10- C10-8 C10-10 C10-1 C10-1 C10-1 C10-18 C10-0 C10- C10- C10- C10-8 C10-0 C10- C10- C10-0 C10- C10-8 C1- C1- C1- C1-8 C1-10 C1-1 C1-1 C1-1 C1-18 C8R8 C8R0 C8R C8R C8R0 C8R C8R8 C10R C10R C10R C10R C10R8 C10R10 C10R1 C10R1 C10R1 C10R18 C10R0 C10R C10R C10R C10R8 C10R0 C10R C10R C10R0 C10R C10R8 C0R C0R C0R8 C0R9 C0R10 C0R1 C0R1 C0R1 C0R18 C8-8 C8-0 C8- C8- C8-0 C8- C8-8 C10- C10- C10- C10- C10-8 C10-10 C10-1 C10-1 C10-1 C10-18 C10-0 C10- C10- C10- C10-8 C10-0 C10- C10- C10-0 C10- C10-8 C0- C0- C0-8 C0-9 C0-10 C0-1 C0-1 C0-1 C / 10 1/ / / /

6 Table II. Interchangeability (Continued) CROSS REFERENCE OF PART NUMBERS CANCELED NEW MS100 MS MS1 AN1 AN MS C1R0 C1R C1R C1R C1R8 C1R0 C1R C1R C1R0 C1R C1R8 C1R8 C1R10 C1R1 C1R1 C1R1 C1R18 C1R0 C1R C1R C1R C1R8 C1R0 C1R C1R C1R0 C1R C1R8 C1R DASH NUMBER C1-0 C1- C1- C1- C1-8 C1-0 C1- C1- C1-0 C1- C1-8 C1-8 C1-10 C1-1 C1-1 C1-1 C1-18 C1-0 C1- C1- C1- C1-8 C1-0 C1- C1- C1-0 C1- C1-8 C1- C0R0 C0R C0R C0R C0R8 C0R0 C0R C0R C0R0 C0R C0R8 C0-0 C0- C0- C0- C0-8 C0-0 C0- C0- C0-0 C0- C C1R10 C1R1 C1R1 C1R1 C1R18 C1R0 C1R C1R C1R C1R8 C1R0 C1R C1R C1R0 C1R C1R8 1/ New dash numbers added August 198 No replacement C1-10 C1-1 C1-1 C1-1 C1-18 C1-0 C1- C1- C1- C1-8 C1-0 C1- C1- C1-0 C1- C

7 Military Interests: Custodians: Preparing activity: Army - AR DLA - IS Navy - YD1 Air Force - 99 (Project 0-18) Reviewer: Army - AV, AT, GL, ME, MI Navy -MC, SH National Security Agency - NSA

MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A

MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A INCH-POUND MS19D April 199 Superseding MS19C 18 July 198 MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-A This specification is approved for use by

More information

PERFORMANCE SPECIFICATION SHEET MICROPHONE ASSEMBLY, M-169A/AIC

PERFORMANCE SPECIFICATION SHEET MICROPHONE ASSEMBLY, M-169A/AIC PERFORMANCE SPECIFICATION SHEET INCH-POUND MIL-PRF-26542/12C 12 September 2012 SUPERSEDING MIL-PRF-26542/12B 11 February 1999 MICROPHONE ASSEMBLY, M-169A/AIC This specification sheet is approved for use

More information

DETAIL SPECIFICATION HOSE ASSEMBLIES, ELASTOMERIC HYDRAULIC FLUID, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR

DETAIL SPECIFICATION HOSE ASSEMBLIES, ELASTOMERIC HYDRAULIC FLUID, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR INCH-POUND MIL DTL 8795E 22 September 2000 SUPERSEDING MIL H 8795D 14 October 1985 DETAIL SPECIFICATION HOSE ASSEMBLIES, ELASTOMERIC HYDRAULIC FLUID, FUEL, AND OIL RESISTANT, GENERAL SPECIFICATION FOR

More information

PERFORMANCE SPECIFICATION VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING

PERFORMANCE SPECIFICATION VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING INCH-POUND 16 October 2012 SUPERSEDING MIL-PRF-6164F 10 October 1998 PERFORMANCE SPECIFICATION VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING This specification is approved for use by all Departments

More information

PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, ARGON

PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, ARGON METRIC 07 August 2013 SUPERSEDING MIL-PRF-27415B 08 February 2007 PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, ARGON Comments, suggestions, or questions on this document should be addressed

More information

DETAIL SPECIFICATION VALVES, EXPANSION, THERMOSTATIC, REFRIGERANT-12 (R-12) AND REFRIGERANT-22 (R-22) Inactive for new design after 1 April 1996.

DETAIL SPECIFICATION VALVES, EXPANSION, THERMOSTATIC, REFRIGERANT-12 (R-12) AND REFRIGERANT-22 (R-22) Inactive for new design after 1 April 1996. [INCH-POUND] MIL-DTL-23450E 7 September 2016 SUPERSEDING MIL-DTL-23450D w/amendment 1 18 January 2011 DETAIL SPECIFICATION VALVES, EXPANSION, THERMOSTATIC, REFRIGERANT- (R-) AND REFRIGERANT-22 (R-22) Inactive

More information

PERFORMANCE SPECIFICATION VALVES, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE

PERFORMANCE SPECIFICATION VALVES, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE INCH-POUND MIL-PRF-25675C 26 NOVEMBER 1997 SUPERSEDING (See 6.8) PERFORMANCE SPECIFICATION VALVES, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE This specification is approved for use by the Department

More information

DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 215, RESISTANCE TO SOLVENTS

DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 215, RESISTANCE TO SOLVENTS INCH-POUND MIL-STD-202-215 4 May 2018 SUPERSEDING MIL-STD-202-215 18 April 2015 DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 215, RESISTANCE TO SOLVENTS AMSC N/A FSC 59GP FOREWORD 1. This standard

More information

DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 215, RESISTANCE TO SOLVENTS

DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 215, RESISTANCE TO SOLVENTS INCH-POUND MIL-STD-202-215 18 April 2015 SUPERSEDING MIL-STD-202G w/change 2 (IN PART) 28 June 2013 (see 6.1) DEPARTMENT OF DEFENSE TEST METHOD STANDARD METHOD 215, RESISTANCE TO SOLVENTS AMSC N/A FSC

More information

PERFORMANCE SPECIFICATION VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING

PERFORMANCE SPECIFICATION VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING INCH-POUND 10 October 1998 SUPERSEDING MIL-V-6164E 15 June 1990 1. SCOPE PERFORMANCE SPECIFICATION VALVE; AIRCRAFT, PNEUMATIC, HIGH-PRESSURE CHARGING This specification is approved for use by all Departments

More information

MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 106 COMPRESSED AIR SERVICE FOR SURFACE SHIPS

MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 106 COMPRESSED AIR SERVICE FOR SURFACE SHIPS SUPERSEDING SECTION 106A 19 April 1973 (See 9.2) MILITARY STANDARD INTERFACE STANDARD FOR SHIPBOARD SYSTEMS SECTION 106 COMPRESSED AIR SERVICE FOR SURFACE SHIPS AMSC N/A FSC 1990 DISTRIBUTION STATEMENT

More information

PERFORMANCE SPECIFICATION

PERFORMANCE SPECIFICATION INCH-POUND 26 September 2007 SUPERSEDING MIL-PRF-83867C (USAF) 10 August 1998 PERFORMANCE SPECIFICATION CONNECTOR, OXYGEN MASK HOSE, NON-EJECTION TYPE This specification is approved for use by the Department

More information

PERFORMANCE SPECIFICATION PROPELLANT, HYDROGEN

PERFORMANCE SPECIFICATION PROPELLANT, HYDROGEN METRIC 17 May 2013 SUPERSEDING MIL-PRF-27201D 07 February 2007 PERFORMANCE SPECIFICATION PROPELLANT, HYDROGEN This specification is approved for use by all Departments and Agencies of the Department of

More information

A-A June 2000 SUPERSEDING BB-N-411C 3 January 1973 COMMERCIAL ITEM DESCRIPTION NITROGEN, TECHNICAL

A-A June 2000 SUPERSEDING BB-N-411C 3 January 1973 COMMERCIAL ITEM DESCRIPTION NITROGEN, TECHNICAL METRIC 1 June 2000 SUPERSEDING BB-N-411C 3 January 1973 COMMERCIAL ITEM DESCRIPTION NITROGEN, TECHNICAL The General Service Administration has authorized the use of this commercial item description by

More information

DETAIL SPECIFICATION VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE

DETAIL SPECIFICATION VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE INCH-POUND 7 December 2016 SUPERSEDING MIL-V-20065D(SHIPS) 8 June 1967 DETAIL SPECIFICATION VALVES, ANGLE, PRESSURE RELIEF, NAVAL SHIPBOARD, FOR STEAM SERVICE This specification is approved for use by

More information

COMMERCIAL ITEM DESCRIPTION NITROGEN, TECHNICAL

COMMERCIAL ITEM DESCRIPTION NITROGEN, TECHNICAL METRIC 3 March 2011 SUPERSEDING A-A-59503B 20 October 2008 COMMERCIAL ITEM DESCRIPTION NITROGEN, TECHNICAL The General Services Administration has authorized the use of this commercial item description

More information

MILITARY SPECIFICATION. CARTRIDGE 5.56mm, BALL, M855. MIL-C-63989C was inactivated after 15 September 1996 For New Design.

MILITARY SPECIFICATION. CARTRIDGE 5.56mm, BALL, M855. MIL-C-63989C was inactivated after 15 September 1996 For New Design. INCH-POUND MIL-C-63989C (AR) 30 January 2001 SUPERSEDING AMENDMENT 3 15 October 1999 MILITARY SPECIFICATION CARTRIDGE 5.56mm, BALL, M855 MIL-C-63989C was inactivated after 15 September 1996 For New Design.

More information

Hardened Steel Washers

Hardened Steel Washers USS (Type A Wide) Flat Washers Hardened Steel Washers Grade 8 S.A.E. Dimensions American Standard Lbs. Per No./Pcs. Gauge M Pcs. Per Lb. 3/16 9/16 1/4 18 (3/64) 2.8 361 1/4 3/4 5/16 16 (1/16) 6.7 149 5/16

More information

GENERAL INFORMATION & REFERENCE SPECIFICATIONS

GENERAL INFORMATION & REFERENCE SPECIFICATIONS GENERAL INFORMATION & REFERENCE SPECIFICATIONS FLAT WASHER AVAILABILITY - The flat washers listed in this catalog represent only a small portion of the many that are available. The Anillo inventory contains

More information

MILITARY SPECIFICATION POWDER, BLACK

MILITARY SPECIFICATION POWDER, BLACK INCH-POUND 2 October 1998 SUPERSEDING AMENDMENT 1 10 June 1997 MILITARY SPECIFICATION POWDER, BLACK This Amendment forms a part of Military Specification dated 5 February 1993, and is approved for use

More information

PERFORMANCE SPECIFICATION HARNESS AND CABLE ASSEMBLIES

PERFORMANCE SPECIFICATION HARNESS AND CABLE ASSEMBLIES METRIC 26 July 1996 SUPERSEDING MIL-H-62540(AT) 15 June 1987 PERFORMANCE SPECIFICATION HARNESS AND CABLE ASSEMBLIES This specification is approved for use by the U.S. Army Tank-automotive and Armaments

More information

DETAIL SPECIFICATION HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN

DETAIL SPECIFICATION HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN DETAIL SPECIFICATION INCH-POUND 25 August 2017 SUPERSEDING w/amendment 1 24 February 2009 HOSE ASSEMBLY, METAL, FLEXIBLE, BREATHING OXYGEN This specification is approved for use by all Departments and

More information

DEPARTMENT OF DEFENSE TEST METHOD VISUAL INSPECTION GUIDE FOR RUBBER ELASTROMERIC O-RINGS AMSC N/A FSC 5330

DEPARTMENT OF DEFENSE TEST METHOD VISUAL INSPECTION GUIDE FOR RUBBER ELASTROMERIC O-RINGS AMSC N/A FSC 5330 NOTE: MIL-STD-413 has been redesignated as a Test Method Standard. The cover page has been changed for Administrative reasons. There are no other changes to this Document. MIL-STD-413C 8 DECEMBER 1980

More information

DETAIL SPECIFICATION VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE

DETAIL SPECIFICATION VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE INCH-POUND MIL-DTL-25469J 08 December 2014 SUPERSEDING MIL-V-25469H 17 August 1990 DETAIL SPECIFICATION VALVES, FILLER, LIQUID OXYGEN, AIRCRAFT TYPE INACTIVE FOR NEW DESIGN Comments, suggestions, or questions

More information

DETAIL SPECIFICATION HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL

DETAIL SPECIFICATION HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL INCH-POUND 20 September 2007 SUPERSEDING MIL-DTL-6000C 10 December 1998 DETAIL SPECIFICATION HOSE, RUBBER, AIRCRAFT, FUEL, OIL, COOLANT, WATER, AND ALCOHOL This specification is approved for use by all

More information

DETAIL SPECIFICATION HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS

DETAIL SPECIFICATION HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS INCH-POUND DETAIL SPECIFICATION MIL-DTL-3992F 13 September 2017 SUPERSEDING MIL-DTL-3992F w/amendment 3 14 April 2014 HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS This specification is

More information

COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING

COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING INCH-POUND 2 July 2010 SUPERSEDING A-A-55826 5 September 1996 COMMERCIAL ITEM DESCRIPTION TORCHES, OXYACETYLENE, HAND HELD, CUTTING AND WELDING The General Services Administration has authorized the use

More information

DETAIL SPECIFICATION HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE

DETAIL SPECIFICATION HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE INCH-POUND 1 May 2018 SUPERSEDING w/amendment 1 19 January 2010 DETAIL SPECIFICATION HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE This specification is approved for use by all Departments and

More information

GGG-M-125/3A September 20, 1982 SUPERSEDING GGG-M-125/3 March 28, 1975 FEDERAL SPECIFICATION

GGG-M-125/3A September 20, 1982 SUPERSEDING GGG-M-125/3 March 28, 1975 FEDERAL SPECIFICATION September 20, 1982 SUPERSEDING GGG-M-125/3 March 28, 1975 FEDERAL SPECIFICATION RESPIRATOR ASSEMBLIES: AIR LINE, WITH DISPOSABLE HOOD (SUPPLIED AIR) This specification was approved by the Commissioner,

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487

More information

Other Si min/max. Cr min/max. 0.4/ / / / Bal.

Other Si min/max. Cr min/max. 0.4/ / / / Bal. 178.46 Specification 3AL seamless aluminum cylinders. (a) Size and service pressure. A DOT 3AL cylinder is a seamless aluminum cylinder with a imum water capacity of 1000 pounds and minimum service pressure

More information

PERFORMANCE SPECIFICATION PROPELLANT, OXYGEN

PERFORMANCE SPECIFICATION PROPELLANT, OXYGEN METRIC 21 November 2006 SUPERSEDING MIL-PRF-25508F 19 October 1995 PERFORMANCE SPECIFICATION PROPELLANT, OXYGEN This specification is approved for use by all Departments and Agencies of the Department

More information

DETAIL SPECIFICATION HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE

DETAIL SPECIFICATION HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE INCH-POUND 23 October 2006 SUPERSEDING MIL-DTL-5593D 8 January 2002 DETAIL SPECIFICATION HOSE, AIRCRAFT, LOW PRESSURE AIR AND VACUUM, FLEXIBLE This specification is approved for use by all Departments

More information

PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN

PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN METRIC 07 August 2013 SUPERSEDING MIL-PRF-27401F 10 January 2008 PERFORMANCE SPECIFICATION PROPELLANT PRESSURIZING AGENT, NITROGEN Comments, suggestions, or questions on this document should be addressed

More information

IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE

IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard

More information

Courtesy of Loos & Co., Inc.

Courtesy of Loos & Co., Inc. INCH-POUND 22 December 2015 SUPERSEDING RR-W-410G 24 June 2010 FEDERAL SPECIFICATION WIRE ROPE AND STRAND The General Services Administration has authorized the use of this federal specification by all

More information

INTRODUCTION TABLE OF CONTENTS

INTRODUCTION TABLE OF CONTENTS 2 INTRODUCTION Thank you for choosing Servometer to design and manufacture your unique, new electrodeposited bellows for your particular application. The definitions, formulas and design parameters inside

More information

DETAIL SPECIFICATION. HOSE, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65 F to +160 F

DETAIL SPECIFICATION. HOSE, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65 F to +160 F INCH-POUND MIL-DTL-8788G 24 May 2017 SUPERSEDING MIL-DTL-8788G 11 May 2015 DETAIL SPECIFICATION HOSE, RUBBER, HYDRAULIC, HIGH PRESSURE 3,000 PSI, OPERATING TEMPERATURE RANGE -65 F to +160 F This specification

More information

PERFORMANCE SPECIFICATION FILTER ELEMENTS, DISPOSABLE, FLUID PRESSSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE

PERFORMANCE SPECIFICATION FILTER ELEMENTS, DISPOSABLE, FLUID PRESSSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE INCH-POUND 24 July 2013 SUPERSEDING MIL-PRF-83860C(USAF) 31 January 1998 PERFORMANCE SPECIFICATION FILTER ELEMENTS, DISPOSABLE, FLUID PRESSSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE Comments, suggestions,

More information

Continental Industries TRANSITION FITTINGS or FAX Visit

Continental Industries TRANSITION FITTINGS or FAX Visit Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

Vertical and Horizontal Bladder Tanks

Vertical and Horizontal Bladder Tanks DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized

More information

DETAIL SPECIFICATION HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR

DETAIL SPECIFICATION HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR INCH-POUND 4 December 2008 SUPERSEDING MIL-DTL-52471E 27 April 1998 DETAIL SPECIFICATION HOSE AND HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE TYPE, GENERAL SPECIFICATION FOR This specification is approved

More information

COMMERCIAL ITEM DESCRIPTION CYLINDER, COMPRESSED GAS: DOT SPECIFICATIONS 4B, 4BA, 4BW, AND 4E

COMMERCIAL ITEM DESCRIPTION CYLINDER, COMPRESSED GAS: DOT SPECIFICATIONS 4B, 4BA, 4BW, AND 4E INCH-POUND 24 February 2005 SUPERSEDING A-A-59666 26 December 2001 COMMERCIAL ITEM DESCRIPTION CYLINDER, COMPRESSED GAS: DOT SPECIFICATIONS 4B, 4BA, 4BW, AND 4E The General Services Administration has

More information

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.

ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D. 90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds

More information

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32

A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 A COMPLETE LISTING OF OUR WASHERS BY INNER DIAMETER STARTS ON PAGE D32 Component Flat Washers Component Flat Washers The Largest Selection in the World! Steel, Stainless Steel and Brass The standard Flatwasher

More information

pvc well casing & drop pipe

pvc well casing & drop pipe C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due

More information

Hoses and Lances 20,000 PSI

Hoses and Lances 20,000 PSI Jetstream provides a full arrangement of hoses and flex lances for ultra high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 20,000 psi application. A large

More information

HEAVY DUTY PNEUMATIC

HEAVY DUTY PNEUMATIC HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11

More information

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS

GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,

More information

Fraser Bronze Alloy LG2 - BRONZE. Mechanical Properties (Typical) Continuous Cast Centrifugal Cast

Fraser Bronze Alloy LG2 - BRONZE. Mechanical Properties (Typical) Continuous Cast Centrifugal Cast Fraser Bronze Alloy LG2 - BRONZE Bronze Bushing Product Information Sheet - LG2 A. W. Fraser Alloy LG2 is a general puspose leaded gunmetal conforming to the requirements of B.S. 1400-1985 Alloy LG2. LG2

More information

WEDGE-ALL Wedge Anchors

WEDGE-ALL Wedge Anchors WEDGE-ALL Wedge Anchors The Wedge-All wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-fi lled masonry. A one-piece clip ensures uniform holding capacity

More information

Structurals Rationalised sizes of Beams/Joists, Channels and Angles

Structurals Rationalised sizes of Beams/Joists, Channels and Angles Structurals Rationalised sizes of Beams/Joists, Channels and Angles Section Dimensions Sectional Weight Length mm kg/m m Beams/Joists Beams Durgapur Steel Plant 175 x 85 x 5.8 19.6 Std length 200 x 100

More information

FEDERAL SPECIFICATION WIRE ROPE AND STRAND

FEDERAL SPECIFICATION WIRE ROPE AND STRAND INCH-POUND 6 December 2007 SUPERSEDING RR-W-410E 7 February 2002 FEDERAL SPECIFICATION WIRE ROPE AND STRAND The General Services Administration has authorized the use of this federal specification by all

More information

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (. 434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300

More information

Drop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated

Drop-In Internally Threaded Anchor (DIAB) Mechanical Anchors. Key features. Material: Carbon steel. Coating: Zinc plated Drop-In Internally Threaded Anchor (DIAB) Expansion shell anchors for use in solid base materials Simpson Strong-Tie introduces a new, redesigned Drop-In Anchor (DIAB) that provides easier installation

More information

SECTION BUTTERFLY VALVES

SECTION BUTTERFLY VALVES SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class

More information

MLS Series Liquid Level Switches. Installation and Operations Manual Section 15

MLS Series Liquid Level Switches. Installation and Operations Manual Section 15 MLS Series Liquid Level Switches Installation and Operations Manual 00-02-0730 2012-11-11 Section 15 In order to consistently bring you the highest quality full featured products, we reserve the right

More information

MS Back-up, Spiral

MS Back-up, Spiral MS 28782 Back-up, Spiral 1. Material: MIL-R-8791. 2. Surface must be smooth and free from irregularities. 4. Z gap dimension to be met with retainer over a mandrel of M diameter +.000 -.002. 5. Dash numbers

More information

Section GATE VALVES

Section GATE VALVES Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT

More information

Submittal / Substitution Request

Submittal / Substitution Request Submittal / Substitution Request SUBMITTED TO: To: Firm: Project: Submitted Product: SIMPSON STRONG-TIE WEDGE-ALL WEDGE ANCHOR Specified Product: Section: Page: Detail/Sheet No.: Description of Application:

More information

Downloaded from

Downloaded from NOTE: has been redesignated as a Test Method Standard. The cover page has been changed for Administrative reasons. There are no other changes to this Document. 15 FEBRUARY 1957 SUPERSEDING NAVSHIPS 250-344-7

More information

Product Specification Spring Finger

Product Specification Spring Finger Product Specification 108-115008-3 Spring Finger Restricted to Sony Ericsson Mobile Communications 1. SCOPE 1.1. Content This specification covers the requirements for product performance test methods

More information

STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL)

STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) STANDARD SPECIFICATION FOR SPLIT TEES (HOT TAP MATERIAL) TEE (HOT TAPPING MATERIAL) S-04-02-040 Page 1 of 7 1.0 SCOPE This specification covers the basic requirements for the design, manufacture and supply

More information

COMMERCIAL ITEM DESCRIPTION RUBBER, SILICONE; SHEET, SOLID, SHAPE 15

COMMERCIAL ITEM DESCRIPTION RUBBER, SILICONE; SHEET, SOLID, SHAPE 15 INH-POUND 5 May 2011 SUPERSEDING --55759 12 September 1995 OMMERIL ITEM DESRIPTION RUER, SILIONE; SHEET, SOLID, SHPE 15 The General Services dministration has authorized the use of this ommercial Item

More information

Code Compliance Research Report CCRR-0145

Code Compliance Research Report CCRR-0145 Code Compliance Research Report CCRR-0145 Issue Date: 11-16-2009 Revision Date: 11-29-2018 Renewal Date: 11-18-2019 DIVISION: 05 - Metals Section: 05 50 00 Metal Fabrications Marshall Stamping Company

More information

INTRODUCTION. Disclaimer

INTRODUCTION. Disclaimer 3 INTRODUCTION The Steel Framing Industry Association (SFIA) was formed with the objective of assisting companies having interests in the cold-formed steel framing industry to be more successful by unifying

More information

for Cold-Formed Steel Framing Products

for Cold-Formed Steel Framing Products Technical Guide for Cold-Formed Steel Framing Products Technical Data in this publication is applicable to the following SFIA Member Company: For a complete directory of SFIA Members who are certified

More information

UNIFIED FACILITIES GUIDE SPECIFICATIONS

UNIFIED FACILITIES GUIDE SPECIFICATIONS USACE / NAVFAC / AFCEC / NASA UFGS-35 01 70.13 (May 2014) Change 1-08/14 -------------------------- Preparing Activity: USACE Superseding UFGS-35 01 43 (April 2008) UNIFIED FACILITIES GUIDE SPECIFICATIONS

More information

1 Exam Prep. Questions and Answers

1 Exam Prep. Questions and Answers Part 1 1 Exam Prep Standard for Polyvinyl Chloride Pressure Pipe ANSI/AWWA C900-07 Questions and Answers 1. Which of the following statement is not a correct statement? A. A DR is the average O.D. divided

More information

tubepress press procedure

tubepress press procedure tubepress press procedure tubepress 15mm up to 35mm tubepress 15 mm up to 35 mm 1. The tube ends must be clean with no scratches or grooves. Remove end caps. Cut tube to length. 2. Deburr tube inside and

More information

Health & Safety Policy and Procedures Manual SECTION 25 RIGGING AND HOISTING EQUIPMENT

Health & Safety Policy and Procedures Manual SECTION 25 RIGGING AND HOISTING EQUIPMENT SECTION 25 RIGGING AND HOISTING EQUIPMENT 1. RIGGING AND HOISTING: These rules apply to all Maul Electric, Inc. employees and subcontractors. Note: Maul Electric, Inc. employees will utilize mechanical

More information

DETAIL SPECIFICATION HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR

DETAIL SPECIFICATION HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR INCH-POUND 24 July 2006 SUPERSEDING MIL-H-81581A 01 June 1982 DETAIL SPECIFICATION HOSE ASSEMBLIES, BREATHING OXYGEN AND AIR, GENERAL SPECIFICATION FOR Reactivated after 24 July 2006 and may be used for

More information

threaded rod Keystock Diamond Case Linear Shafting strapping seals tools

threaded rod Keystock Diamond Case Linear Shafting strapping seals tools threaded rod Keystock Diamond Case Linear Shafting strapping seals tools THREADED STEEL ROD... 19-2 KEY STOCK... 19-2 STEEL STRAPPING... 19-3 DIAMOND CASE SHAFTING Carbon (1060) Standard Sizes... 19-4

More information

2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT?

2003 WJTA American Waterjet Conference August 17-19, 2003 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT? 23 WJTA American Waterjet Conference August 17-19, 23 Houston, Texas Paper PIPE THREADS-WHAT IS THE LIMIT? D. Wright, J. Wolgamott, G. Zink StoneAge, Inc. Durango, Colorado, U.S.A. ABSTRACT At present

More information

Section 7 AMERICAN. Specials

Section 7 AMERICAN. Specials Section 7 AMERICAN Specials AMERICAN Specials The principal standards relating to AMERICAN Specials are ANSI/AWWA C110/A21.10, C151/A21.51, and C153/A21.53. These and other standards are referenced throughout

More information

NAVSEA STANDARD ITEM. 2.2 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods

NAVSEA STANDARD ITEM. 2.2 T9074-AS-GIB-010/271, Requirements for Nondestructive Testing Methods NAVSEA STANDARD ITEM ITEM NO: 009-53 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Bolted Bonnet Steam Valve; repair (shop) 2. REFERENCES: 2.1 S9086-CJ-STM-010/CH-075, Fasteners 2.2 T9074-AS-GIB-010/271,

More information

Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE. Steel Stud Manufacturers Association

Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE. Steel Stud Manufacturers Association Now with SUPREME FRAMING SYSTEM! PRODUCT TECHNICAL GUIDE Steel Stud Manufacturers Association 2507 3064P Product Identification "S" and "SFS" - C-STUD/JOIST S and SFS-SECTIONS* * For "S" and "SFS" members,

More information

MIL-V-5527A 14 MAY 1951 Superseding MIL-V January 1950 MILITARY SPECIFICATION VALVES; AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF

MIL-V-5527A 14 MAY 1951 Superseding MIL-V January 1950 MILITARY SPECIFICATION VALVES; AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF 14 MAY 1951 Superseding MIL-V-5527 3 January 1950 MILITARY SPECIFICATION VALVES; AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF This specification was approved by the Department of the Army, the Navy, and

More information

Continental Industries STEEL SERVICE TEES or FAX Visit

Continental Industries STEEL SERVICE TEES or FAX Visit Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and

More information

for Cold-Formed Steel Framing Products

for Cold-Formed Steel Framing Products Technical Guide for Cold-Formed Steel Framing Products The data in this guide is based upon the 2007 American Iron and Steel Institute s S00-07 North American Specification for the Design of Cold-Formed

More information

2-3/8 REG JM-4 $1,536 RM-4 $1, /4 REG JM-3 $1,536 RM-3 $1, /8 REG JM-8 $1,827 RM-8 $2,268 TM-8 $3,177 Add $610 $640 $640 $640

2-3/8 REG JM-4 $1,536 RM-4 $1, /4 REG JM-3 $1,536 RM-3 $1, /8 REG JM-8 $1,827 RM-8 $2,268 TM-8 $3,177 Add $610 $640 $640 $640 MILLING TOOLS Mill Size O.D. 2-1/4-2-1/2 2-5/8-2-3/4 2-7/8-3-1/8 3-1/4-3-5/8 3-3/4-4-1/4 4-3/8-4-5/8-4-3/4 4-7/8-5 1-1/4 JM-1 $1,395 RM-1 $1,817 1-1/4 JM-2 $1,536 RM-2 $1,921 1-1/4 JM-3 $1,536 RM-3 $1,921

More information

VERTICAL BLADDER TANK

VERTICAL BLADDER TANK Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure

More information

Casing Spacer Technology Leaders

Casing Spacer Technology Leaders Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,

More information

Air Operated Hydraulic Pumping Systems to 50,000 psi

Air Operated Hydraulic Pumping Systems to 50,000 psi High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air

More information

SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN

SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN Page 1 of 11 1. SCOPE: 1.1. This provides the minimum design, port preparation, and installation and removal requirements for SLAS5103 plugs and is applicable when specified on engineering drawings. These

More information

A A A T E C H N O L O G Y

A A A T E C H N O L O G Y A A A T E C H N O L O G Y & SPECIALTIES CO., INC. C O N S T A N T E F F O R T S U P P O R T S TOTAL SOLUTION SERVICE For the Industrial Piping Marketplace 2012 www.aaatech.com 4 1 Y E A R S S E R V I N

More information

Regulations Respecting Compressed Gas Pressure Vessels

Regulations Respecting Compressed Gas Pressure Vessels COMPRESSED GAS PRESSURE VESSELS SR 99/70 1 Regulations Respecting Compressed Gas Pressure Vessels Repealed by Chapter B-5.1 Reg 1 (effective January 1, 2007) Formerly Saskatchewan Regulations 99/70 (effective

More information

HORIZONTAL BLADDER TANK

HORIZONTAL BLADDER TANK Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure

More information

REPORT HOLDER: FRAMECAD LICENSING LTD. POST OFFICE BOX 1292 AUCKLAND 1140 NEW ZEALAND EVALUATION SUBJECT: COLD FORMED STEEL C SHAPES AND TRACKS

REPORT HOLDER: FRAMECAD LICENSING LTD. POST OFFICE BOX 1292 AUCKLAND 1140 NEW ZEALAND EVALUATION SUBJECT: COLD FORMED STEEL C SHAPES AND TRACKS 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2361 Reissued 05/2017 This report is subject to renewal 05/2019. DIVISION: 05 00

More information

PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter.

PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE. APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE REGULATORS UPSTREAM DIFFERENTIAL PRESSURE APPLICATION: For maintaining a constant differential pressure across meter. PRESSURE RANGE: Steel: 10 psig to 300 psig CAPACITY: Refer to Table of Contents.

More information

ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel

ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel 1.0 Introduction ASME Boiler & Pressure Vessel Code Analysis of the 1497 MHz High-Current Cryomodule Helium Vessel Katherine Wilson 28 May 2007 To minimize the hazards associated with vacuum and pressure

More information

East Building, PHH-30 U.S. Department New Jersey Avenue S.E. of Transportation Washington, D.C DOT-SP (TENTH REVISION)

East Building, PHH-30 U.S. Department New Jersey Avenue S.E. of Transportation Washington, D.C DOT-SP (TENTH REVISION) East Building, PHH-30 U.S. Department 1200 New Jersey Avenue S.E. of Transportation Washington, D.C. 20590 Pipeline and Hazardous Materials Safety Administration DOT-SP 11025 (TENTH REVISION) EXPIRATION

More information

ENGINEERING DESIGN GUIDE. D-M-E Hydraulic Unscrewing Device

ENGINEERING DESIGN GUIDE. D-M-E Hydraulic Unscrewing Device ENGINEERING DESIGN GUIDE D-M-E Hydraulic Unscrewing Device ENGINEERING DESIGN GUIDE D-M-E Hydraulic Unscrewing Device Hydraulic Unscrewing Device Without guiding thread with cam Safety Considerations Mold

More information

l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6

l DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts

More information

1 Exam Prep. Tabs and Highlights

1 Exam Prep. Tabs and Highlights 1 Exam Prep NFPA 14: Standard for the Installation of Standpipe and Hose Systems Tabs and s These 1 Exam Prep tabs are based on the NFPA 14: Standard for the Installation of Standpipe and Hose Systems,

More information

Aeroquip Fluid Conveyance

Aeroquip Fluid Conveyance Aeroquip Fluid Conveyance Technical Focus Rynglok Hydraulic Tube Fitting System Eaton s Aeroquip Brand RYNGLOK tube fitting system is the system of choice for aerospace hydraulic tubing for military, commercial

More information

Summary of Substantive Changes between the 2004 e1 and 2017 editions of ASSE 1011, Hose Connection Vacuum Breakers

Summary of Substantive Changes between the 2004 e1 and 2017 editions of ASSE 1011, Hose Connection Vacuum Breakers Summary of Substantive Changes between the 2004 e1 and 2017 editions of ASSE 1011, Hose Connection Vacuum Breakers Presented to the IAPMO Standards Review Committee on October 15, 2018 General: The changes

More information

North American Orifice Metering System

North American Orifice Metering System Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual

More information

SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN

SHUR-LOK CORPORATION TECHNICAL SALES BULLETIN Page 1 of 9 1. SCOPE: 1.1. This provides the minimum design, port preparation and installation and removal requirements for SLAS4383-XX-XX, SLF2002-XX-XX and SLF3004-XX-XX adapter reducer and is applicable

More information

G238. G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable. Features

G238. G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable. Features G238 G238 Family 3 & 4 Point Bend Fixtures Modular & Configurable The G238 features a unique modular design enabling it to expand to a variety of test scenarios from a standard 3 point bend test to 4 point

More information