MSDS for (2,2,6,6-Tetramethylpiperidinooxy) **** MATERIAL SAFETY DATA SHEET **** Section 1 - Chemical Product and Company Identification MSDS Name 2,2,6,6-Tetramethylpiperidinooxy Catalog Numbers 235286 Synonyms 1-Piperidinyloxy, 2,2,6,6-tetramethyl- (9CI) Tanan Tanane Tempo Tetramethylpiperidine nitroxide 2,2,6,6-Tetramethylpiperidine-1-oxyl Tetramethylpiperidinooxy 2,2,6,6-Tetramethylpiperidinooxy 2,2,6,6-Tetramethylpiperidinooxyl 2,2,6,6-Tetramethylpiperidinyloxy 2,2,6,6-Tetramethyl-1-piperidinyloxy 2,2,6,6-Tetramethylpiperidoxyl Company Identification (China) J&K CHEMICAL LTD. 18AEF, Building-D, Majestic Garden 6 Bei-Si-Huan-Zhong Road Beijing China 100029 For information in China, call (86 10) 82848833 For emergencies in China, call (86 532) 3889090;(86 532) 3889191 Section 2 - Composition, Information on Ingredients CAS# Chemical Name % EINECS# 2564-83-2 2,2,6,6-Tetramethylpiperidinooxy 98% 219-888-8 Haz Symbols:C Risk Phrases:34 Eye Section 3 - Hazards Identification EMERGENCY OVERVIEW POTENTIAL HEALTH EFFECTS
Skin Ingestion Inhalation Chronic May be harmful if swallowed. May be harmful if inhaled. Material is extremely destructive to the tissue of the mucous membranes and upper respiratory tract. Section 4 - First aid Measures Eyes In case of contact with eyes, flush with copious amounts of water for at least 15 minutes. Assure adequate flushing by separating the eyelids with fingers. Call a physician. Skin In case of skin contact, flush with copious amounts of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Ingestion If swallowed, wash out mouth with water provided person is conscious. Call a physician immediately. Inhalation If inhaled, remove to fresh air. If not breathing give artificial respiration. If breathing is difficult, give oxygen. Notes to Physician General Information Extinguishing Media Section 5 - Fire Fighting Measures Wear self-contained breathing apparatus and protective clothing to prevent contact with skin and eyes. Water spray. Carbon dioxide, dry chemical powder, or appropriate foam. General Information Spills/Leaks Section 6 - Accidental Release Measures Use proper personal protective equipment as indicated in Section 8. Sweep up, place in a bag and hold for waste disposal. Ventilate area and wash spill site after material pickup is complete. Handling Storage Section 7 - Handling and Storage Do not breathe dust. Do not get in eyes, on skin, on clothing. Avoid prolonged or repeated exposure. Keep tightly closed. Store at 2-8 C Engineering Controls Section 8 - Exposure Controls, Personal Protection Safety shower and eye bath. Use only in a chemical fume hood.
Eyes Skin Clothing Respirators PERSONAL PROTECTIVE EQUIPMENT Wear appropriate chemical safety goggles. Wear appropriate compatible chemical-resistant gloves. Wear appropriate protective clothing to prevent skin exposure. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Where risk assessment shows air-purifying respirators are appropriate use a full-face particle respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Section 9 - Physical and Chemical Properties Physical State Solid Color Red-brown Odor ph Vapor Pressure Viscosity Boiling Point Freezing/Melting Point 36 C Autoignition Temperature Flash Point 67 C Explosion Limits, lower Explosion Limits, upper Decomposition Temperature Solubility in water Specific Gravity/Density Molecular Formula C9H18NO Molecular Weight 156.25 Section 10 - Stability and Reactivity Chemical Stability. Conditions to Avoid Incompatible materials. Incompatibilities with Other Materials Strong oxidizing agents, Strong acids. Hazardous Decomposition Products Carbon monoxide, carbon dioxide, nitrogen oxides. Hazardous Polymerization Will not occur.
RTECS# LD50/LC50 Carcinogenicity Other: Section 11 - Toxicological Information CAS#2564-83-2: TN8991900. RTECS:. 2,2,6,6-Tetramethylpiperidinooxy- Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65. Section 12 - Ecological Information. Section 13 - Disposal Considerations Dispose of in a manner consistent with federal, state, and local regulations. Section 14 - Transport Information IATA IMO RID/ADR Shipping Name: Corrosive solid, basic, Corrosive solid, basic, Corrosive solid, basic, Hazard Class: 8 8 8 UN Number: 3263 3263 3263 Packing Group: II II II Section 15 - Regulatory Information European/International Regulations Hazard Symbols: C Risk Phrases: R 34 Safety Phrases: S 26 In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S 36/37/39 Wear suitable protective clothing, gloves, and eye/face protection. S 45 In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). WGK (Water Danger/Protection) CAS#2564-83-2:3. Canada US Federal TSCA
Section 16 - Additional Information MSDS Creation Date 27/02/2006 Revision #1 Date Original The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no way shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if the company has been advised of the possibility of such damages.