7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION QTY Needed PRICE A 10 Airtank Hatch Cover Assembly 2 $633.00 ea A 10.1 Hatch Cover w/ Handle 2 $265.00 ea A 10.1.A Replacement Handle 2 $20.00 ea A 10.2 Latch 8 $89.25 ea A 10.3 Gasket 2 $11.00 ea A 11 Airtank Test Kit 1 $98.40 ea A 11.1 Replacement Airtank Test Plug 3 $7.50 ea B 10 Battens, Mainsail Set 1 $75.00 set(4) B 10.1 Short 1 $15.00 ea B 10.2 Long 3 $20.00 ea B 11 Battens, Jib Set 1 $13.00 set(3) B 11.1 Short 1 $4.00 ea B 11.2 Long 2 $4.50 ea B 12 Backstay Assembly 1 $747.75 ea B 12.1 Backstay 1 $87.50 ea B 12.2 Wire Pennant (additional information required ) 1 $66.00 ea B 12.3 Deck Casting Assembly 1 $342.00 ea B 12.3.A Casting 1 $250.00 ea B 12.3.B Packing Nut 1 $39.00 ea B 12.3.C Packing 1 $15.00 ea B 12.4.D Harken Sheave (replaces bronze sheave) 1 $38.00 ea B 12.4 Doubler Tackle 1 $116.00 ea B 12.4.A Eye Strap 1 $10.00 ea B 12.4.B Doubling Block 1 $44.05 ea B 12.4.C Rope Pennant 1 $61.75 ea B 12.5 Purchase Tackle 1 $185.75 ea B 12.5.A Cheek Block 1 $40.50 ea B 12.5.B Control Line 1 $55.25 ea B 12.5.C Fiddle Block 1 $53.40 ea B 12.5.D Bulkhead Exit Block 1 $36.60 ea B 13 Bilge Pump, Edson 1 $640.00 ea B 13.1 Hose & clamps 1 $363.00 ea B 13.2 Thru Hull Fitting 1 $44.00 ea B 13.3 bulkhead tubing 1 $197.00 ea B 13.4 Fiberglass base & labor to install pump to base $1,100.00 ea B 14 Bail for boom vang - mast (old style) 1 $69.00 ea B 15 Bail for mainsheet 1 $64.00 ea B 16 Block, Upright Big Bullet Lead Block 1 $37.15 ea B 17 Block, Single Stand Up (Jib Sheet) 1 $47.55 ea B 18 Replacement Spring for Single Stand Up Block 1 $1.05 ea B 19 B 20 Block for spinnaker topping lift 1 $21.90 ea B 21 Block for vang fiddle 1 $50.85 ea B 22 Block vang w/ becket & cam 1 $134.65 ea B 23 Boom w/ internal outhaul, gooseneck, vang plate & mainsheet bail 1 $1,677.00 ea
B 24 Boom (B23) w/ nash cam & headknocker 1 $2,008.00 ea B 25 Boom (B24) w/ Fixed Gooseneck Plate 1 $2,235.00 ea B 26 Boom - Bare Tube Only (no milling) 1 $315.00 ea B 26.1 Headknocker w/ nash cam (no base) 1 $331.00 ea B 26.2 Headknocker Pad w/ vang tang 1 $178.00 ea B 26.3 Reinforcement sleeve 1 $110.00 each B 27 Boom bare tube w/ sail feed & beveled aft end 1 $388.00 ea B 28 Boom Crutch 1 $225.00 ea B 29 Boom Vang Kit 1 $444.50 ea B 29.1 4:1 Purchase 1 $256.50 ea B 29.1.A Upper Block 1 $53.40 ea B 29.1.B Line 1 $61.50 ea B 29.1.C Lower Block 1 $141.40 ea B 29.2 Doubler Tackle 1 $188.00 ea B 29.2.A Doubler Plate 1 $65.00 ea B 29.2.B Shackle 3 $4.15 ea B 29.2.C Pennant 1 $66.50 ea B 29.2.D Block 1 $44.05 ea B 30 Bow Chock Assembly 1 $419.25 ea B 30.1 Bow Chock Casting (Chrome ) 1 $406.50 ea B 30.2 Pin w/ Lanyard 1 $12.75 ea C 10 Cam Cleat 1 $36.35 ea C 10.1 Eye strap for cam cleat 1 $2.15 ea C 11 Chainplates (port & stbd) 1 $500.00 pair C 11.1 Chainplate bolts 1 $12.00 ea C 12 Cleat, Bow 1 $25.00 ea C 13 Cleat, Halyard Jam Cleat (teak) 1 $70.00 ea C 14 Cleat, Stern 1 $20.00 ea C 15 Coaming Replacement Kit C 15.1 Port & Starboard Coamings C 15.1.A per side 2 Call for Price ea C 15.2 Forward Coaming C 15.3 Aft Coaming C 15.4 Port & Starboard Forward Corner Coamings C 15.5 Reinforcing Knee C 15.6 Fastening Kit (bungs & screws ) 2 Call for Price ea C 16 Cockpit Cover 1 $565.00 ea C 17 Compass - Deck Mount (Analog ) 1 $128.99 ea C 18 Compass (Analog ) w/ SS Bracket for Mast 1 $640.25 ea C 18.1 Compass 1 $337.25 ea C 18.2 Bracket 1 $303.00 ea C 19 Compass (Digital ) w/ Bracket & Mounting Slug for Mast 1 $569.99 ea C 19.1 Tacktic Compass w/ Bracket 1 $549.99 ea C 19.2 Mounting Slug 1 $20.00 ea C 20 Control Console, Forward, w/ Fairleads & Cleats 1 $850.00 ea C 20.1 Control Console, Forward (only) 1 $475.00 ea C 21 Control Console, Midship, w/ Blocks & Cleats 1 $647.00 pair C 22 Cunningham Kit 1 $179.99 ea C 22.1 Hook 1 $28.65 ea C 22.2 Pennant 1 $40.25 ea C 22.3 Upper Block 1 $40.25 ea
C 22.4 Line 1 $43.75 ea C 22.5 Lower Block 1 $43.15 ea F 10 Fairlead BE uphaul alum (small) 1 $60.00 ea F 11 Fairlead BE spinnaker alum (large) 1 $60.00 ea F 12 Fairlead chrome 1 $74.00 ea F 13 Flagpole Assembly 1 $118.50 ea F 13.1 Flag Pole (teak ) 1 $39.99 ea F 13.2 Socket 1 $78.40 ea F 14 Floorboard Set F 14.1 Forward F 14.2 Middle F 14.3 Aft F 15 Forestay 1 $203.05 ea F 15.1 w/ Callibrated Turnbuckle additional $17.70 ea F 16 Forestay Assembly 1 $374.00 ea F 16.1 Deck Casting 1 $133.00 ea F 16.2 Threaded Eye w/ Set Screw 1 $130.00 ea F 16.3 Rod w/ Nut 1 $42.00 ea F 16.4 "U" Strap w/ Bolt 1 $69.00 ea F 17 Forestay "Seagull" (Internal Stem) 1 $320.00 ea G 10 Gooseneck (Complete) w/ Fixed Gooseneck Plate for mast 1 $728.00 ea G 11 Gooseneck slide only 1 $284.00 ea G 12 Gooseneck slide Chris-Craft 1 $329.00 ea G 13 Gooseneck center toggle 1 $142.00 ea G 14 Gooseneck fixed plate to mast 1 $227.00 ea G 15 Gooseneck welded back plate 1 $106.00 ea G 16 Gooseneck casting w/tack pin,tang & welded plate 1 $359.00 ea G 17 Gooseneck articulating tack pin & bolt 1 $200.00 ea G 18 Gooseneck tack pin 1 $14.00 ea H 10 Half Model white hull no waterline or bottom paint on teak board 1 $680.00 ea H 11 Hand rail teak H 12 Halyard, Mainsail 1 $307.25 ea H 13 Halyard, Jib 1 $294.75 ea H 14 Halyard, Spinnaker 1 $324.69 ea H 15 Hiking stick telescoping & removable 1 $115.50 ea J 10 Jib sheets 1 $89.50 pair J 11 Jib sheet track (Inboard/Outboard ) 2 $41.25 ea J 12 Jib sheet track (Fore/Aft) 2 $44.50 ea J 13 Jib track end stop 4 $12.10 ea J 14 Jib track slide 2 $88.05 ea J 15 Jib sheet slide w/ block & spring 2 $144.10 ea J 16 Jib tack shackle 1 $20.25 ea K 10 Keel w/ bolts 1 $9,280.00 ea K 11 Keel bolts w /nuts 1 $895.00 set (6) K 12 King Post for winch/halyard cleats/teak 1 $705.00 ea L 10 Lifting Ring (stainless steel) 2 $80.10 ea L 11 Lifting Bar w/ Hook (eye nuts sold seperately ) 1 $1,365.00 ea M 10 Mainsail & Jib (North Sails) 1 $5,215.00 ea M 10.1 Mainsail (North Sails) 1 $3,075.00 ea M 10.2 Jib (North Sails) 1 $2,140.00 ea M 11 Mainsail & Jib (Harding) 1 $4,635.00 ea
M 11.1 Mainsail (Harding) 1 $2,755.00 ea M 11.2 Jib (Harding) 1 $1,880.00 ea M 12 Mainsheet 1 $106.25 ea M 13 Mast Complete w/ Hardware & Spreaders 1 $4,180.00 ea M 14 Mast collar fiberglass (buff) 1 $125.00 ea M 15 Mast head casting 1 $132.50 ea M 16 Mast hound assembly 1 $390.00 ea M 17 Mast Step Casting 1 $82.25 ea M 18 Mast Step Casting Wedge 1 $26.00 ea M 19 Mast Step Support (Fiberglass) 1 $735.00 ea M 20 Mast Step Support SS Backing Plate 1 $27.00 ea M 21 Mast Chock 1 $53.00 ea O 10 Outboard bracket SS side rated for a 4HP long shaft 1 $960.00 ea R 10 Rubrail Installation Kit 1 $346.60 ea R 10.1 Hazardous Materials Shipping & Handling additional $89.00 ea R 10.2 Rubrail Only (White Vinyl ) 1 $236.25 ea R 10.3 Adhesive Only 1 $197.00 ea R 11 Rudder w/ SS Shaft (Excludes Primer & Bottom Paint) 1 $2,776.75 ea R 11.1 Rudder Shipping Crate additional $350.00 ea R 12 Rudder Fairing Strips 2 $47.00 ea R 13 Rudder Heel Casting (Machined) 1 $648.00 ea R 14 Rudder Heel Casting (Requires Machining) 1 $273.00 ea R 15 Rudder Head Casting (Chrome Plated) 1 $597.00 ea R 16 Rudderport Assembly 1 $320.50 ea R 16.1 Rudderport Tube (Fiberglass) 1 $200.00 ea R 16.2 Rudderport Packing Assembly (Includes: ) 1 $105.00 ea Packing Spud, Lock Nut, Packing Box Hose, Hose Clamps R 16.3 Rudderport Flax Packing 1 $15.50 ea S 10 Seat - teak each 2 Call for Price ea S 11 Sheave Box, Main/Jib/Spin top 1 $246.00 ea S 12 Sheave Box, Main or Jib lower 1 $240.00 ea S 13 Shroud, Upper 2 $203.05 ea S 13.1 Calibrated Turnbuckle additional $17.70 ea S 14 Shroud, Lower 2 $201.25 ea S 14.1 Calibrated Turnbuckle additional $15.95 ea S 15 Spinnaker (North Sails) Full radial nylon 1 $2,530.00 ea Full radial AirX 1 $2,755.00 ea S 16 S 16.1 Spinnaker (Harding) Light Air 1 $2,185.00 ea S 16.2 Racing 1 $2,530.00 ea S 17 Spinnaker Launching Bag 1 $412.50 ea S 18 Spinnaker Pole Downhaul 1 $66.75 ea S 19 Spinnaker Pole Topping Lift 1 $81.75 ea S 20 Spinnaker Pole w/ Double Bridle 1 $530.00 ea S 21 Spinnaker Sheets (Cruising ) 1 $185.50 pair S 22 Spinnaker Sheets (Light Air Racing ) 1 $372.75 pair S 23 Spinnaker Sheets (Racing ) 1 $496.25 pair S 24 Spinnaker Track Ring Slide 1 $154.00 ea S 25 Standing Rigging Set (Standard) 1 $1,099.25 set (6) S 26 Standing Rigging Set w/ Calibrated Racing Forestay 1 $1,117.00 set (6)
S 27 Standing Rigging Set (Racing) 1 $1,184.25 set (6) T 10 Taffrail 1 $300.00 ea T 11 Tiller, Varnished 1 $675.00 ea T 11.1 w/ Telescoping Hiking Stick additional $120.45 ea T 12 Tiller Strap Casting (Chrome Plated) 1 $623.00 ea T 13 Toerail (One Side Only) 2 $457.50 ea T 14 Track for spinnaker pole 1 $58.00 ea T 15 Trailer tandem axles w/elec brakes 1 $6,850.00 ea T 16 Trailer - Mast Supports 1 $468.75 pair T 17 Traveler Assembly 1 $1,481.50 ea T 17.1 Track w/ Compound Bend 1 $215.00 ea T 17.2 Molded Deck Support (Fiberglass ) 1 $420.00 ea T 17.3 Control Ends 1 $228.20 pair T 17.4 Traveler Car 1 $281.90 ea T 17.5 Mainsheet Block 1 $58.10 ea T 17.6 Traveler Car Control Blocks 1 $146.80 pair T 17.7 Control Lines 1 $131.50 pair T 18 Twing Installation Kit 1 $577.00 ea T 18.1 Hardware 1 $425.00 ea T 18.2 Twing lines w/ blocks 1 $152.00 pair W 10 Winch Base (teak) 4 Call for Price ea W 11 Winch, Halyards 2 $188.00 ea W 12 Winch Handle 5 $105.00 ea W 13 Winch, Sheets (w/ underdeck spindle) 4 $425.75 ea W 13.1 Replacement Underdeck Spindle 4 $157.00 ea W 14 Windex 1 $63.25 ea W 15 Winter Cover 1 $1,350.00 ea PLEASE NOTE Fit of parts can only be guaranteed on unmodified boats built by Cape Cod Shipbuilding Co. Replacement parts are available for all current production models, but please be advised that these may not identically match the existing parts on older Cape Cod boats. All Pricing: FOB PLANT - Prices Subject to Change Without Notice RETURN POLICY You may return unused stock items within 30 days of purchase for a refund, less 10% restocking fee & shipping charges. Parts returned beyond 30 days are subject to 50% restocking fee. There will be no refund for parts returned after 45 days. The following items are Non-Returnable: Special Orders (Non-Stock Items), Paint, Varnish, Gelcoat & Rubrail Adhesive.* MANUFACTURING POLICY Special Orders and Custom Parts will be manufactured in the order in which we receive signed estimates accompanied by the required deposit. All sales of Special Order and Manufactured Items are FINAL.* *Except for Defective or Non-Conforming Goods as per the implied warranty of merchantability under Massachusetts State Law.