Work at height To easily reach ones workstation, to position simply and to move without constraint requires particular practices and the appropriate materials. By choosing Cousin Trestec s Work at height dedicated safety ropes, safety and lightness will be guaranteed to workers at height. Sécurité INDUSTRIE PRO static ropes Use: on building sites, heavy soiling of ropes occurs requiring regular replacement. Range of static ropes for work at height. Thinner and lighter. The tight braiding of the sheath limits the penetration of grit and dirt. > Sécurité INDUSTRIE PRO Ref 1425 Static rope, ø 10,5 mm vailable in standard lengths of 200m. Standard diameter, economic, thin & light. 10,1 mm 65,2 g/m Weight/metre - Core 61,60% Weight/metre - Sheath 38,40% 13 falls 425 dan Static elongation (50 to 150 kg) 2,90% Flexibility to knot 0,72 > 2200 dan with a figure-of-8 knot > 1500 dan Retraction 3,60% > Sécurité INDUSTRIE PRO Ref 1435 Static rope, ø 11 mm vailable in standard lengths of 200m. The high diameter means greater breaking strength, economic. With a breaking strength of 3265daN this rope has exceptional durability. Colour: White/black, black or red/blue 10,7 mm 74,4 g/m Weight/metre - Core 61,60% Weight/metre - Sheath 38,40% > 20 falls 532 dan Static elongation (50 to 150 kg) 2,90% 6 mm Flexibility to knot 0,7 3265 dan with a figure-of-8 knot > 1500 dan Retraction 3,10% > Sécurité INDUSTRIE PRO 1445 Static rope, ø 12,5 mm vailable in standard lengths of 200m. The largest diameter in the static rope range, offering better friction and maximum mechanical characteristics. 12,7 mm 97 g/m Weight/metre - Core 55 % Weight/metre - Sheath 45 % 21 falls 590 dan Static Elongation (50 à 150kg) 2,30 % 16mm Flexibility to knot 0,96 3780 dan with a figure-of-8 knot > 1500 dan Retraction 4,2 % THE TECHNICL ROPE EXPERT - Tel. +33 3 20 14 40 59 - Fax +33 3 20 39 59 12
Sécurité INDUSTRIE Use: especially adapted for the toughest uses (building sites...). The greater % of sheath and the 6.6 material offers greater resistance to heating and abrasion. > Sécurité INDUSTRIE Ref 1232 Static rope, ø 9mm, Conforms to EN 1891 & CE for trained professionals. Use: rope specifically for descents and long abseils. They require greater attention during use. vailable in standard length of 200m. Very light, flexible, small diameter. B 9,4 mm 57,8 g/m Weight/metre - Core 56% Weight/metre - Sheath 44% 7 falls 434 dan Static elongation (50 to 150 kg) 3,80% 5 mm Flexibility to knot 0,94 2275 dan with a figure-of-8 knot > 1200 dan Retraction 2% > Sécurité INDUSTRIE Ref 1532 Static rope, ø 10,5 mm, Conforms to EN 1891 & CE standards. Use: the benchmark rope, the most popular caving rope. vailable in standard lengths of 200m. Comfortable diameter, perfectly suitable for use in hazardous surroundings & work at height. 10,4 mm 71,3 g/m Weight/metre - Core 58% Weight/metre - Sheath 42,10% 10 falls 472 dan Static elongation (50 to 150 kg) 2,80% Flexibility to knot 0,97 2740 dan with a figure-of-8 knot 1528 dan Retraction 2% > Sécurité INDUSTRIE Ref 1832 Static rope, ø 11 mm, Use: its Ø 11mm reassures users and adapts perfectly to the majority of descenders and other anti-fall equipment on the market. vailable in standard lengths of 200m & Pré-packs of 10 m, 20 m, 30 m & 60m. Individually packed, ideal for presentation on the shelf. Maximum safety and resistance to abrasion/heating. Colour: White/black or white/red 11 mm 75,4 g/m Weight/metre - Core 55% Weight/metre - Sheath 45% 8 falls 555 dan Static elongation (50 to 150 kg) 1,80% 1 mm Flexibility to knot 1 3090 dan with a figure-of-8 knot > 1500 dan Retraction 2,20% > Sewn webbing loops Sewn loops, Use: webbing for anchors & belays. : 2200 dan Width: 19mm Make up: plastic blister packs. Colour Length THE TECHNICL ROPE EXPERT Orange Blue Yellow Red 0,60 m 0,80 m 1,20 m 1,50 m www.cousin-trestec.com contact@cousin-trestec.com
Technical standards Work at height, arboriculture, rescue, military operations there are as many specific ropes as applications. In close cooperation with their technical advisers who test ropes in real-life conditions, COUSIN Trestec offers you the best in the safety rope market. Made to last, our ropes are certified to CE and UI standards or fulfil the specific requirements of the military. Our safety ropes mainly conform to EN 1891 or EN 892 standards. Ropes known as static, more precisely called braided ropes, have a low elongation coefficient. These conform to EN 1891 standards and are mainly used to reach, to position or to maintain oneself at ones working station. With low elongation, ropes known as static avoid the Yo-yo effect when climbing or while suspended. These ropes offer great reliability and have a wide range of applications, and particularly in the 10.5mm and 11mm diameters. Ropes known as Dynamic These conform to EN 892 standards. Designed especially for climbing, these ropes must be used any time a move is made above an anchor point. ble to absorb energy generated by a violent fall by their elasticity, these ropes are reserved for experienced people. Ropes known as Single with a diameter less than 10.5mm are now the most commonly used in the market. EN 1891 principal requirements extract B (Factor 1) (Factor 0.3) (100 kg) 600 dan (100 kg) Static elongation (50 to 150 kg) 5% Static load Static load with figure-of-8 knot (3 minutes) Sheath slippage 2200 dan minimum (80 kg) 600 dan (80 kg) 1800 dan minimum 1500 dan 1200 dan < 20+ 10 (Ø 9 mm) if Ø 12 mm < 20+ 5 (Ø 12 mm) if 12,1 < Ø < 16 mm (Factor 2) EN 892 principal requirements extract Single rope Double rope Twin rope (80 kg) (50 kg) 12 falls (80 kg 2 strands) (Factor 2) 1200 dan 800 dan 1200 dan Dynamic elongation (Factor 2) < 40% Static elongation 10 % 12 % 10% Sheath slippage 2 Caution: the densities and the stated diameters can be different from the commercial appelation and the diameters under load.
Surrounded by dangers, rescue workers must be equipped with light & strong ropes to execute the most delicate missions. With Cousin Trestec ropes, a rescue in hazardous surroundings will be accomplished safely. Safety > Sécurité INCENDIE Ref 1165 Static rope, Ø 12,5 mm, Conforms to NIT 271 standard. Use: dedicated firefighters rope. vailable in 30m lengths, 60m lengths or 200m reels. > Sécurité INDUSTRIE Ref 1532 Static rope, ø 10,5 mm, Conforms to EN 1891 & CE standards. Use: the benchmark rope, the most popular caving rope. vailable in standard lengths of 200m. > TOP ROCK Ref 4935 Dynamic single rope, ø 10,7 mm, Conforms to EN 892 & CE standards. Use: perfectly suited for military use due to a 30% reinforcement of the sheath. vailable in standard lengths of 50m, 60m, 200m & 300 m. > PRO FORCES Ref 4045 Dynamic rope, Ø 8,6 mm, Twin rope, cabled core. Conforms to EN 892 et CE standards. Use: for multi-pitch rock climbs and mountaineering. vailable in 200m reels or 50m lengths. Multi braided core significantly delays failure. Colour: 2007, yellow; 2008, red; 2009, grey; 2010, blue 12,6 mm (factor 1) - 5mm loop > 20 falls (factor 2) - 5mm loop 4 falls (factor 1) - 1mm loop 2 falls 510 dan Number of carriers 40 Elongation (5 to 90 kg) 3,50% Elongation (30 to 3000 dan) 25,40% 3600 dan with a figure-of-8 knot > 2200 dan Comfortable diameter, perfectly suitable for use in hazardous surroundings. 10,4 mm 71,3 g/m Weight/metre - Core 58% Weight/metre - Sheath 42,10% 10 falls 472 dan Static elongation (50 to 150kg) 2,80% Flexibility to knot 0,97 2740 dan with a figure-of-8 knot 1528 dan Retraction 2% Colour: Red/black Single rope 10,7 mm 74 g/m Weight/metre - Core 60% Weight/metre - Sheath 40% 10 falls 820 dan Dynamic elongation 34,90% Static elongation 6,30% 2400 dan Robust, excellent shock absorption. Colour: Red/orange/yellow or Yellow/black/grey Twin rope Diameter under 6 kg 8,6 mm 46,5 g/m Weight/metre - Core 59,04% Weight/metre - Sheath 40 % 9 falls 530 dan Number of carriers 40 Dynamic elongation 31,7 % Static elongation 8 % 0 Flexibility to knot 0,83 1356 dan THE TECHNICL ROPE EXPERT - Tel. +33 3 20 14 40 59 - Fax +33 3 20 39 59 12
> Equinoxe Rope Ref 790 Braided polyester core, 32 plaits on polyester cabled core. Presentation: reels of 200m or 100m according to diameter. Thinner & more flexible than classic cabled rope. > Synthetic braided lanyard Ø 7mm Fitted with self-locking karabiner at each end. Use: To guide the descent of personnel or equipment. vailable in 30m lengths. Flexible & light, quick to connect and lock. Ø mm Res. Kg WLL* kg g/m 10 2600 370 71 12 3500 500 106 14 4500 640 147 16 5500 780 195 18 8500 1210 250 * Working Load Limit > Cords for Mountaineering, polyamide, Ø 7mm Use: accessory cords for various applications & manoeuvres. vailable in reels of 25m & 200m. : 1050daN Weight: 29 g/m Secours THE TECHNICL ROPE EXPERT > Sewn webbing loops Sewn loops, Use: webbing for anchors & belays. : 2200 dan Width: 19mm Make up: plastic blister packs. Colour Orange Blue Yellow Red Length 0,60 m 0,80 m 1,20 m 1,50 m www.cousin-trestec.com contact@cousin-trestec.com