Replacement parts to fit CHAIN & SPROCKETS CONTENTS. Alphabetical Index Follows

S ALPHABETICAL INDE C Chain Connector Links, to 5 Detachable, 5 to 6 Detachable Attachment Link, 6 Half Links, to 5 s, to 5 Repair Tool, Roller, 7 Roller, to 4 Roller Links, to 2 T-Bar Detachable, 5 T-Bar Detachable Attachment Link, 5 Tool, Roller, 5, 7 Combine Parts Idler, Chain, 8, 6 Sprocket, Split, 8 D Detachable Chain, 5 to 6 Detachable Chain Attachment Link, 6 Display, eld Sprocket, 3 S Screw, Rivet Punch, 7 Screw, Roller Chain Repair Tool, 7 Split Sprocket, 8 Sprocket, to 2 Sprocket eld Hub, 9 to 0 Sprocket, Chain Idler, 8, 6 Sprocket, Combine Split, 8 T T-Bar Detachable Chain, 5 T-Bar Detachable Chain Attachment Link, 5 Tightener, Roller Chain, 4 to 5 Tip, Roller Chain Tool, 7 eld Pulley, 0 eld Sprocket, to 2 eld Sprocket Display, 3 H Hub, Idler, 0 Hub, Pulley & Sprocket eld, 9 to 0 I Idler Hub, 0 Idler Pulley, 8 L Links, Chain Connector, to 5 Links, Chain Roller, to 2 Links, Offset Chain Connector, to 5 O, Roller Chain, 2 P Puller, Roller Chain, 7 Pulley, 0 Pulley eld Hub, 9 to 0 Pulley, Idler, 8 Punch, 7 Punch Screw, Rivet, 7 R Rivet Punch, 7 Rivet Punch Screw, 7 Roller Chain, to 4, 2 Puller, 7 Repair Tool, 5, 7 Repair Tool Screw, 7 Repair Tool Tip, 7 Tightener, 4 to 5 CS-II www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S Replacement parts to fit S High Quality Import Roller Chain 35RC RC 4RC RC RCHD RC RCHD 65RC RC RCHD 00RC 20RC RC RC /2" /2" /2" " " -/4" -/2" - 2" Links Per 0' Chain Roller idth ' Roll 320 3/6" 2 5/6" RC 2 /4" 4RC 92 RC 92 RCHD /2" RC /2" RCHD 2 /8" 20 RC 20 96 " 69 " -/4" Double Strand Import Roller Chain Conn Link 35CL CL 4CL CL CLHD CL CLHD 65CL CL CLHD 00CL 20CL CL CL 35OF OF 4OF OF OFHD OF OFHD 65OF OF OFHD 00OF 20OF OF OF Roller Link 35RL RL 4RL RL RL RLHD RL RLHD 00RL 20RL RL DRC DRC DRC DRC /2" " Links Per 0' Chain 2 92 20 Roller idth Conn Link 5/6" /2" Extended Import Roller Chain DCL DCL DCL DCL DOF DOF DOF DOF Roller Link RL RL RL RL 20RC 20RC 20RC " -/4" -/2" Links Per 0' Roller idth Chain 20 5/6" 96 /2" ' Roll 20RC 20RC 20RC Conn Link 20CL 20CL 20CL 20OF 20OF 20OF Roller Link 20RL 20RL 20RL CS-- www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S DRIES Roller Chain and Parts RC35P RCP RC4P RCP RCP RCHP RCP RCHP RC00P RC20P RC20HP RCP RCP /2" /2" " " -/4 -/2" -/2" - 2" Links Per 0' 320 2 2 92 20 20 96 69 Roller idth 3/6" 5/6" /4" /2" /2" " " " -/4" ' Rolll RCP RC4P RCP RCP RCHP RCP RCHP DRIES Double Strand Roller Chain Conn Link CL35P CLP CL4P CLP CLP CLHP CLP CLHP CL00P CL20P CL20HP CLP CLP HL35P HLP HL4P HLP HLP HLHP HLP HLHP HL00P HL20P HL20P HLP HLP RCDP RCDP RCDP /2" Links Per 0' 2 92 Roller idth 5/6" /2" DRIES Extended Roller Chain Conn Link DCLP DCLP DCLP HLDP HLDP Roller Link RL RL RL RC20P RC20P RC20P " -/4" -/2" Links Per 0' 20 96 Roller idth 5/6" /2" ' Roll RC20P RC20P Conn Link CL20P CL20P CL20P HL20P HL20P HL20P Roller Link 20RL 20RL 20RL www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--2

S Replacement parts to fit S DIAMOND Single Strand Roller Chain ARC35 ARC ARC4 ARC ARC ARCH ARC ARCH ARC00 ARC00H Duty Heavy Heavy Heavy /2" /2" " " -/4" -/4" idth 3/6" 5/6" /4" /2" /2" DIAMOND Double Strand Chain ' Roll ARC35 ARC ARC4 ARC ARC ARCH ARC ARCH ARC00 Conn Link ACL35 ACL ACL4 ACL ACL ACLH ACL ACLH ACL00 ACL00H AHL35 AHL AHL4 AHL AHL AHLH AHL AHLH AHL00 AHL00H ARCD ARCD ARCD ARCD Duty /2" " idth 5/6" /2" Conn Link ADCL ADCL ADCL ADCL DIAMOND Double Single Strand Chain AHLD AHLD AHLD AHLD ARC20 ARC20 ARC20 Duty " -/4" -/2" idth 5/6" /2" ' Roll ARC20 ARC20 ARC20 Conn Link ACL20 ACL20 ACL20 AHL20 AHL20 AHL20 CS--3 www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S Stainless Steel Import Roller Chain RCSS RCSS RCSS RCSS /2" " Links Per 0' Chain 2 92 20 METRIC Roller Chain Roller idth 5/6" /2" ' Roll Conn Link CLSS RCSS CLSS CLSS CLSS OFSS OFSS OFSS OFSS Roller Link RLSS RLSS RLSS RLSS 0BRC 2BRC 6BRC 20BRC 5.875 mm 9.05 mm 25. mm 3.75 mm Roller idth 9.65 mm.68 mm 7.02 mm 9.56 mm Transmission Type Chain 0' Length 0BRC0 2BRC0 6BRC0 20BRC0 Conn Link 0BCL 2BCL 6BCL 20BCL 0BOF 2BOF 6BOF 20BOF Roller Link 0BRL 2BRL 6BRL 20BRL A5.630" A620.654" Roller idth Conn. Link 5/64" A5CL 63/64" A620CL Conveyor Type Chain Offset Link A5HL A620HL CA5.630" Roller idth Conn. Link CA5CL Offset Link CA5HL Roller Link CA5RL www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--4

S Replacement parts to fit S Corn Head Gathering Chain Not available in bulk, sold only as complete gathering chain assemblies. See Allis Chalmers, Case, John Deere, International Harvester, Massey Ferguson, New Holland, & hite sections for specific assembly part numbers and applications. T-Bar Detachable Chain Graetz Type steel detachable chain and attaching links, rugged, trouble free ag. chain that holds up in hostile conditions. T67 series chain used by many OEMs as original equipment on conveyors and manure spreaders T67 Attachment link, 2.55" pitch, 47 links per 0 ft. Application CA555 chain type CA20H chain type 25DC 32DC 32 42DC H 5DC 52DC 55DC 62DC 62H 67H 67H Conn. Link CA555CL CL20H Offset Link CA555HL HL20H Detachable Steel Link Chain 25DC - 67H Links Per 0 Ft. 33 04 04 87 87 06 74 73 73 52 52 T67ASL T67ASR T67AL T67AR T67A2L Attachment link, 2.55" pitch, 47 links per 0 ft. 2/64" hole dia. Attachment link 2.55" pitch, 47 links per 0 ft. 2/64" hole dia. Attachment link, 2.55" pitch, 47 links per 0 ft. 25/64" hole diameter. Attachment link, 2.55" pitch, 47 links per 0 ft. 25/64" hole dia. Attachment link, 2.55" pitch, 47 links per 0 ft. 29/64" hole dia. T67A2R Attachment link, 2.55" pitch, 47 links per 0 ft. 29/64" hole dia. ALFCO Chain Repair Tool CD58 Heavy duty tool for easy disassembly of detachable chain. Sized for use with 25 through 77 detachable chain. Perfect for "on the spot" repairs. CS--5 www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S Detachable Steel Link Chain * 67HASL & 67HASR are.200" thick compared to existing.85" thick heavy 67HAS Chain Number Links Per 0 Ft. Links Per 0 Ft. 55DC 74 74 62DC 73 73 67H 52 52 67H 52 52 55AR 55AL 62AR 62AL 67HASR 67HASL 67HASL 67HASR 55A2R 55A2L 55C 62C 55G27R 55G27L 55HB4 55K 62K 55SD 62SD 62SH 55CPLR 62CPLR www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--6

S Replacement parts to fit S Special Chain Tools For Roller Chain Extractor tool for speedy dismantling of roller chain. CD327T Tip only for chain tool CD37. Chain Repair Tool CD36 For chain up to pitch, thru # chain. CPT Chain puller tool for repairing #35 through # chain. Tru-Power Chain Breaker CD37 For chain to -/4" pitch, #,, & 00 chain. CD336S Complete repair screw and tip assembly for CD36 chain breaker. Comes with handle. Large capacity chain jaws accept: Single strand roller chain #35 thru #, standard & heavy duty. Double strand roller chain #35 thru #, standard & heavy duty. Extra long hardened steel punch completely extracts connecting pin without damage to links or rollers. up to four standard tools, separates chain in one operation, no need to punch out pins separately. RCTC35 Tru-Power chain breaker tool with instructions. RCTC Large vise screw CD337S Replacement screw and pressure tip for CD37 chain breaker. RCTC2 RCTC55 Small vise screw Large punch screw RCTC552 Small punch screw RCTC5 Large punch RCTC5 Small punch CD326T Tip only for chain repair tool CD36. CS--7 www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S Idler Pulleys Flat Belt (with Precision bearings) Idler Sprockets ith Precision Bearings SIP48 SIP4 SIP68 SIP6 SIP08 SIP0 O.D. 2-2- 4" 4" BORE /2" /2" O.D. 5" 5" BELT SURFACE IDTH -3/6" -3/6" -3/6" -3/6" -Belt BORE /2" Split Sprockets Reduce down time - not necessary to pull shaft to change sprockets Sprockets are precision manufactured of heat treated steel They maintain accurate pitch and perfect timing, greatly reducing chain wear Installation instructions included The following split-sprockets are used most often on the OEM combines listed in the charts below. However, split-sprockets may work on other makes of combines that require the same number of teeth and bore size as listed. SIS708 SIS70 SIS308 SIS30 SIS8 SIS SIS708 SIS70 SIS08 SIS0 SIS30 SIS8 SIS Special one piece heavy hardened solid steel sprockets with double sealed precision ball bearing pressed into it. Not two piece sprocket like many of the O.E.M.s offer. Customer has the choice of long life assured heavy duty idler sprocket. USE ITH CHAIN SIZE or 4 or 4 NO. OF TEETH 7 7 3 3 5 5 7 7 3 5 5 BORE /2" /2" /2" /2" /2" /2" H57A5 H57B6 H58A6 H59NHIH TOOTH COUNT 7 7 8 9 ROUND BORE " -/4" " (Hex Bore) -/5" CHAIN TYPE CA5 CA5 CA5 CA5 OEM IHC IHC JD IHC LOCATION USED clean grain & tailings elevator clean grain elevator clean grain elevator feeder house www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--8

S eld-sprocket Hubs Replacement parts to fit S BORE SIZE /2" to 9/6" to 7/8", 5/6" to -/4" -5/6" to - -7/6" to - -3/6" to 2" KEYAY SIZE /8" x /6" 3/6" x 3/32" /4" x /8" 5/6" x 5/32" x 3/6" /2" x /4" SH0008 SH0009 SH000 SH00 SH002 SH003 SH004 SH20008 SH20009 SH2000 SH200 SH2002 SH2003 SH2004 SH2005 SH2006 SH2007 SH2008 SH2009 SH20020 SH26 SH22206 SH3000 BORE SIZE /2" 9/6" /6" 3/6"" 7/8" /2" 9/6" /6" 3/6" 7/8" 5/6" " -/6" -/8" -3/6" -/4" -/8" - BORE TYPE 6-SPLINE 6-SPLINE SERIES SH300 SH3002 SH3003 SH3004 SH3005 SH3006 SH3007 SH3008 SH3009 SH30020 SH3002 SH30022 SH30023 SH30024 SH36 SH32206 SH3S020 BORE SIZE /6" 3/6" 7/8" 5/6" " -/6" -/8" -3/6" -/4" -5/6" - -7/6" -/2" -/8" - -/4" BORE TYPE 6-SPLINE 6-SPLINE SQUARE SERIES CS--9 www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S eld Sprocket Double Hubs eld-sprocket Idler Hubs Fits Series eld sprockets for double chain SH6 Hub, weld-sprocket double hub. " round bore. Fits Series sprockets where -style hubs are used. SH20 Hub, weld-sprocket double hub. -/4" round bore. Fits series sprockets where -style hubs are used. Idler hubs available in I.D. bores. Packaged with /2" I.D. bushing. Same precision ball bearing as used in idler sprockets. SH6 SH20 Hub, weld-sprocket double hub. " round bore. Fits Series sprockets where -style hubs are used. Hub, weld-sprocket double hub. -/4" round bore. Fits series sprockets where -style hubs are used. SH2B300 SH3B300 series hub, round bore. Includes /2" I.D. reducer bushing. Dimension (A) -, (B) -3/6" series hub, round bore. Includes /2" I.D. reducer bushing. Dimension (A) 2", (B) 2-/4" eld-sprocket Pulleys Coupler Hubs Designed to connect two separate shafts. For shafts of same or different sizes. 023226 Coupler Hubs. Fits series hubs O.D. 2" I.D. -. Designed to connect two separate shafts. For shafts of same or different sizes. 0232 Hub, coupler. Coupler Hubs. Fits series hubs. O.D. 2-/2". I.D. 2". SS2 SS300 SS3 SS0 SS4 SS0 SS5 SS0 SS6 SS700 SS0 SS900 SS000 SS00 SS200 SS0 SS0 O.D. 2-/2" 3" 3-/2" 4" 4-/2" 5" 5-/2" 6" 6-/2" 7" 8" 9" 0" " 2" 4" 6" FITS SERIES www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--0

eld Sprockets, Series PITCH CHAIN NO SERIES OF USED NO. OF TEETH /2" 2 SS02 /2" 3 SS03 /2" 4 SS04 /2" 5 SS05 /2" 6 SS06 /2" 7 SS07 /2" 8 SS08 /2" 9 SS09 /2" 20 SS020 /2" 2 SS02 /2" 22 SS022 /2" 23 SS023 /2" 24 SS024 /2" 25 SS025 /2" 26 SS026 /2" 27 SS027 /2" 28 SS028 /2" 30 SS030 /2" 32 SS032 /2" 35 SS035 /2" 36 SS036 /2" SS0 /2" 42 SS042 /2" 45 SS045 /2" 48 SS048 /2" 54 SS054 /2" SS0 eld Sprockets, Series PITCH CHAIN NO SERIES OF USED NO. OF TEETH 0 SS00 SS0 2 SS02 3 SS03 4 SS04 5 SS05 6 SS06 7 SS07 8 SS08 9 SS09 20 SS020 2 SS02 22 SS022 23 SS023 24 SS024 25 SS025 26 SS026 27 SS027 28 SS028 29 SS029 30 SS030 3 SS03 32 SS032 33 SS033 34 SS034 35 SS035 36 SS036 37 SS037 38 SS038 39 SS039 SS0 4 SS04 42 SS042 43 SS043 44 SS044 45 SS045 48 SS048 54 SS054 SS0 CS-- www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. S Replacement parts to fit S

S S eld Sprockets, Series eld Sprockets, Series SS009 SS00 SS0 SS02 SS03 SS04 SS05 SS06 SS07 SS08 SS09 SS020 SS02 SS022 SS023 SS024 SS025 SS026 SS027 SS028 SS029 SS030 SS03 SS032 SS033 SS034 SS035 SS036 SS038 SS0 SS042 SS045 SS048 SS054 SS0 NO. OF TEETH 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 32 33 34 35 36 38 42 45 48 54 SERIES OF USED CHAIN NO PITCH SS009 SS00 SS0 SS03 SS04 SS05 SS06 SS07 SS09 SS020 NO. OF TEETH 9 0 3 4 5 6 7 9 20 SERIES OF USED CHAIN NO PITCH " " " " " " " " " " www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--2

S Replacement parts to fit S SD2L SH0008 SH000 SH002 SH004 SH20008 SH20009 SH2000 SH200 SH2002 SH2003 SH2004 SH2005 SH2006 SH2007 SH2008 SH2009 SH20020 SH26 SH22206 SH3000 SH300 SH3002 SH3003 SH3004 SH3005 SH3006 SH3007 SH3008 SH3009 SH30020 eld Sprocket and Hub Display eld-sprocket display center offers a large variety of sprockets, pulleys and hubs which can be welded together to offer OEM quality sprocket or pulley. Offers,, and roller chain sprockets and 2-/2" to 6" O.D. pulleys to be welded on hubs /2" to -/2", hubs come in round and splined bores. Sprockets are marked as to chain size, number of teeth and hub series they are used with. Contents are listed below. Light display. Contents listed below. Description Qty in SD2L SH3002 SH30022 SH30023 SH30024 SH36 SH32206 SIS708 SIS308 SIS0 SS000 SS00 SS200 SS0 SS0 SS2 SS300 SS3 SS0 SS4 SS0 SS5 SS0 SS6 SS700 SS0 SS900 SS02 SS03 SS04 SS05 SS06 SS07 SS08 SS09 SS020 SS02 SS022 SS024 SS026 SS028 SS030 SS032 SS036 SS0 SS045 SS048 SS00 SS0 SS02 SS03 SS04 SS05 SS06 SS07 SS08 Description IDLER IDLER IDLER Qty in SD2L CS--3 www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S SS09 SS020 SS02 SS022 SS024 SS026 SS028 SS030 SS032 SS036 SS009 SS00 SS0 SS02 SS03 SS04 SS05 SS06 SS07 SS08 SS09 SS020 SS02 SS022 SS024 SS026 SS028 SS030 Description Snugulator Bearing Kits Qty in SD2L 20BD3 25BE3 2755CB2 ROLLER CHAIN SIZE 00 and smaller pitch and smaller pitch and smaller Snugulator Tighteners Replacing idler sprockets and belt idlers with these two devices will extend belt and chain life. Belts and chain will run quieter, smoother, and cooler, solving many of the problems associated with roller chain and belt drive assemblies. Perfect for belts and roller chains with short runs where a bolt can be used as a mounting device. Choose a tightener that will protrude a minimum of /8" beyond each side of the chain. BOLT HOLE MOUNTING SIZE /2",, /2",,, /2", IDTH 2-/8" - " O.D. 3-/2" 3-/2" 2- CENTER PROTRUSION /8" one side /8" one side /6" both sides BGA Bearing replacement kit, contains: bearings, bushing, and snap ring. Services Idlemaster 20ABE3, 2856BE3, Snugulator 25BE3, 25FBE3. www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--4

S Replacement parts to fit S Snugulator Flanged Tighteners Replacing idler sprockets and belt idlers with these two devices will extend belt and chain life. Belts and chain will run quieter, smoother, and cooler, solving many of the problems associated with roller chain and belt drive assemblies. Perfect for belts and roller chains with short runs where a bolt can be used as a mounting device. Choose a tightener that will protrude a minimum of /8" beyond each side of the chain. 2755FCB2 25FBE4 25FBE3 20FBD3 ROLLER CHAIN SIZE and smaller pitch and smaller pitch and smaller 00 pitch and smaller BOLT HOLE MOUNTING SIZE, /2",, /2",, /2",, /2",, IdleMaster Tighteners IDTH " - - 2-/8" OUTER DIAMETER 2-3-/2" 3-/2" 3-/2" DEPTH (CENTER ) -/8" -/6" -/6" -/6" FLANGED DIAMETER 3-/4" 4" 4" 4" FLANGED IDTH -5/6" - - 2-/2" Mainly used on the pressure side with roller chain. It is ideal for heavy surging applications and situations in which there is substantial chain wrap on the idler. Manufactured of hardened steel, the IdleMaster can stand up to the most demanding uses. Ability to stack for double chain applications Tough heat-treated steel construction Easy installation, long lasting and maintenance free independent - can be used with two different pitch chains Tighteners are supplied with installation instructions and bushings to accomodate 3 bolt sizes 264BE 266BE CHAIN PITCH A.5".5" B.290".489" C.30".30" D 2.0" 3." E.085".085" F.29".7" G 3/8, /2, 3/8, /2, CS--5 www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved.

S S IdleMaster Flanged Chain Tighteners Mainly used on the pressure side with roller chain. It is ideal for heavy surging applications and situations in which there is substantial chain wrap on the idler. Manufactured of hardened steel, the IdleMaster can stand up to the most demanding uses. Ability to stack for double chain applications Tough heat-treated steel construction Easy installation, long lasting and maintenance free independent - can be used with two different pitch chains Tighteners are supplied with installation instructions and bushings to accomodate 3 bolt sizes 28CB2 2856BE3 2868BD3 A.85".55".75" B.29".37".475" C.9".39".44" D 2.70" 3.45" 3.45" E 2.30" 3.24" 3.24" F.0".9".9" G.07".04".3" H.07".04".04" Bolt Hole,, /2",, /2",, /2" Roller Chain & & www.tiscoparts.com fax: (0)356-5487 tel: (0)338-045 204 oods Equipment Company/TISCO All rights reserved. CS--6