MATERIAL SAFETY DATA SHEET PAGE 1 OF 4

Similar documents
MATERIAL SAFETY DATA SHEET PAGE 1 OF 4

MATERIAL SAFETY DATA SHEET PAGE 1 OF 4

MATERIAL SAFETY DATA SHEET PAGE 1 OF 4

MATERIAL SAFETY DATA SHEET PAGE 1 OF 5

MATERIAL SAFETY DATA SHEET PAGE 1 OF 4

MATERIAL SAFETY DATA SHEET PAGE 1 OF 5

MATERIAL SAFETY DATA SHEET KOP-COAT, INC PRODUCT INFORMATION: OUTSIDE USA...: PRODUCT IDENTIFICATION

MATERIAL SAFETY DATA SHEET PAGE 1

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Air Tool Lubricant MSDS. Air Tool Lubricant. (800) (Poison Control USA) 24 Hours (800) (CHEMTREC) 24 Hours. Not Applicable - Mixture

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Lemon Oil Furniture Polish. 1. Product and Company Identification. 2. Hazards Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. Quick Identifier (In Plant Common Name): SP-101

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFTEY DATA SHEET

Section 3 Physical Data

Safety Data Sheet. Tuxton Select Full Synthetic 0W20 API SN/GF-5

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

GulfTEC Synthetic Motor Oil 0W-20

MATERIAL SAFETY DATA SHEET

MATERIAL SAFTEY DATA SHEET

SAFETY DATA SHEET ANABEC X-70

SAFETY DATA SHEET SECTION 1- PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: EVERSHIIELD ROOF SEALER MEMBRANE PRODUCT CODE: RC-947

Safety Data Sheet. Tuxton Synthetic Gear Oil 75W90

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. Tuxton Trust Dexron VI

Safety Data Sheet SUREPREP NO-STING SKIN PROTECTANT

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

BUDGET MOLDERS SUPPLY, INC CORPORATE PARK DRIVE MACEDONIA, OHIO MATERIAL SAFETY DATA SHEET MSDS NO.: DATE: May 22, 2007

MATERIAL SAFETY DATA SHEET

CYCLO INDUSTRIES, INC MATERIAL SAFETY DATA SHEET

MSDS REPORT - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION SAN FERNANDO MISSION BVD MISSION HILLS, CA 91345

MATERIAL SAFETY DATA SHEET PAGE 1 OF 4

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

SAFETY DATA SHEET SYSTEMS STAIN REMOVER S.S.R.

SECTION 2 - HAZARDOUS INGREDIENTS Ingredient Name CAS Number Percent TSCA

SAFETY DATA SHEET ANABEC X-90

Material Safety Data Sheet Phenylarsine oxide. Section 1 - Chemical Product and Company Identification

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

MATERIAL SAFETY DATA SHEET. COPPER CARE PRODUCT NAME: Aqua-Nap-5. ATTENTION: SAFETY MANAGER MSDS Number: Date of Last Revision: 04/10/2006

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Phone Emergency Phone Fax (800) (866) (781) May be harmful if swallowed May be harmful in contact with skin

3. Fire And Explosion Hazard Data FLASH POINT: Not determined. However the product is combustible. METHOD USED: Estimated from ingredients.

Material Safety Data Sheet For: Die Set Lube MSDS I.D. #135 P/N Quart Size. MSDS I.D. #136 P/N Gallon Size

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

1. Chemical Product and Company Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Fiebing Company, Inc., Milwaukee, WI Phone #: (414) Emergency Phone:

Material Safety Data Sheet Fiebing Company, Inc., Milwaukee, WI Phone #: (414) Emergency Phone:

MSDS The Blaster Corporation

SAFETY DATA SHEET. Section 1: Company and Product Identification. Section 2: Hazard(s) Identification. Section 3: Product Composition

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET CHEMORSE, LTD

Material Safety Data Sheet. Product Name: SoftCIDE -NA Foam Revision Date: 03/27/08 Version: 1

MSDS The Blaster Chemical Companies, Inc.

M A T E R I A L S A F E T Y D A T A

MATERIAL SAFETY DATA SHEET

Chemical Name: Concrete and Masonry Bonding Primer

MATERIAL SAFETY DATA SHEET

Page Number: 1 of

Safety Data Sheet EPI-CLENZ FOAMING INSTANT HAND SANITIZERS

The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.

Emergency Overview HARMFUL OR FATAL IF SWALLOWED. COMBUSTIBLE. EYE AND SKIN IRRITANT.

Total Systems Technology Inc. Address 65 Terence Drive, Pittsburgh, PA Phone Number Emergency Phone Number

MATERIAL SAFETY DATA SHEET PRODUCT #201

SAFETY DATA SHEET. Dust Mop Treatment. 1. Product and Company Identification. 2. Hazards Identification

TESCO Products Inc. Crystal Seal II

Toluidine Blue, 1% Avantik 36 Commerce Street Springfield, NJ Tel: Fax: Page 1/5

Safety Data Sheet Revised 16 November 2015

Material Safety Data Sheet RUST VETO 342

SAFETY DATA SHEET C NC SATINA MED GLOSS

MSDS for Maintenance Solutions FLASH FLOOR Concrete Restoration Product (part A).

Safety Data Sheet Lyden Oil Company

SAFETY DATA SHEET. Orang-Sol 300. MANUFACTURER 24 HR. EMERGENCY TELEPHONE NUMBERS Detco Industries, Inc.

SAFETY DATA SHEET. Lightning Fast Wax Stripper. 1. Product and Company Identification. 2. Hazards Identification

Phone Emergency Phone Fax (270) (800) (270) CHEMTREC

PRODUCT NAME: SUPERCOAT 316L HMIS CODES H F R P PRODUCT CODE: G EFFECTIVE DATE: NAME OF PREPARER: DARRELL BADERTSCHER

Total Systems Technology Inc. Address 65 Terence Drive, Pittsburgh, PA Phone Number Emergency Phone Number

M A T E R I A L S A F E T Y D A T A S H E E T

MSDS. An Alco Industries Company CHEMTREC: Nova Drive SE Massillon, OH PH FAX

Material Safety Data Sheet

Safety Data Sheet (SDS) Revision / Review Date: 5/27/2015

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

Material Safety Data Sheet CoolingCare 8141

TAMMSCURE WB 30C Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

Safety Data Sheet SKINTEGRITY SHAMPOO & BODY WASH

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS

Transcription:

MATERIAL SAFETY DATA SHEET PAGE 1 OF 4 KOP-COAT, INC EMERGENCIES MARINE GROUP EAST HEALTH/SPILLS...: 800-548-0489 36 PINE STREET CHEMTREC ASSISTANCE: 800-424-9300 ROCKAWAY CHEMTREC OUTSIDE US: 703-527-3887 NJ 07866 CANUTEC...: 613-996-6666 KOP-COAT, INC PRODUCT INFORMATION: 800-221-4466 OUTSIDE USA...: 973-625-3100 1 PRODUCT IDENTIFICATION PRODUCT NAME: 3333 Shipendec Newport Green PRODUCT USE.: Topside coating APPEARANCE..: Green liquid with hydrocarbon odor CAS NUMBER..: Mixture SYNONYMS...: None REVISION...: 4 DATE...: 1/06/00 MSDS NUMBER: 1333300 2 HAZARDOUS INGREDIENTS HAZARDOUS COMPONENT REG AGENCY PPM NOTES MG/M3 NOTES Calcium carbonate ACGIH-TWA - 10 1 (Limestone) OSHA TWA - 15 1 CAS NUMBER:1317-65-3 OSHA-TWA - 5 2 PERCENT BY WGT: 5 TO 10 Titanium dioxide ACGIH-TWA - 10 CAS NUMBER:13463-67-7 NIOSH - (+) - (+) PERCENT BY WGT: 10 TO 15 OSHA TWA - 10 1 Trimethyl benzene ACGIH TLV 25 123 CAS NUMBER:25551-13-7 OSHA TWA 25 125 PERCENT BY WGT: 1 TO 5 Petroleum naphtha NIOSH - 350 CAS NUMBER:64742-88-7 NIOSH STEL - 1800 4 PERCENT BY WGT: 10 TO 15 OSHA TWA 400 1600 Petroleum distillates OSHA-PEL 100 - CAS NUMBER:64742-95-6 PERCENT BY WGT: 1 TO 5 Mineral spirits ACGIH TWA 100 -

PRODUCT NAME: 3333 Shipendec Newport Green PAGE 2 OF 4 2 HAZARDOUS INGREDIENTS HAZARDOUS COMPONENT REG AGENCY PPM NOTES MG/M3 NOTES CAS NUMBER:8052-41-3 NIOSH - 350 PERCENT BY WGT: 15 TO 20 OSHA TWA 100 - NOTES: 1) Total dust 2) Respirable fraction 4) The short term exposure limit (STEL) is a 15-minute TWA that should not be exceeded at any time during a workday. (+)) NIOSH Occupational Carcinogen 3 HAZARDS IDENTIFICATION EYE: Direct contact with liquid or vapor causes irritation. SKIN: Prolonged or repeated contact with the skin can result in defatting and drying of the skin which may result in skin irritation and dermatitis (rash). INHALATION: Avoid breathing vapors or mists. High concentrations may lead to central nervous system effects (drowsiness, dizziness, nausea, headaches). Prolonged or repeated inhalation and ingestion may cause delayed injury involving the kidneys and the blood. INGESTION: Irritating to the nose, throat and respiratory tract. May cause vomiting. Aspiration of this product into the lung may cause chemical pneumonitis which can be fatal. Individuals with pre-existing disease in or a history of ailments involving the skin, eye, respiratory tract, liver, kidney, central nervous system are at a greater than normal risk of developing adverse effects when exposed to this material. 4 FIRST AID MEASURES EYE CONTACT: Immediately flush with plenty of water for at least 15 minutes. Get medical attention. SKIN CONTACT: Remove contaminated clothing. Wash thoroughly with soap and water. If redness, itching, burning or other symptoms develop or persist, get medical attention. Wash contaminated clothing before reuse. INHALATION: If you experience difficulty in breathing, leave the area to obtain fresh air. If breathing has stopped have a trained person administer artificial respiration preferably mouth-to-mouth. If breathing is difficult, give oxygen. Get medical attention.

PRODUCT NAME: 3333 Shipendec Newport Green PAGE 3 OF 4 4 FIRST AID MEASURES INGESTION: If swallowed do NOT induce vomiting. Get immediate medical attention. NEVER GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON. NOTE TO PHYSICIAN: There is no specific antidote for effects from overexposure to this material. Treatment should be directed at the control of symptoms and the clinical condition. 5 FIRE FIGHTING MEASURES FLASH POINT: 89 F/30 C EXTINGUISHING MEDIA: Use dry chemical, carbon dioxide, water spray or foam. FIRE FIGHTING PROCEDURES: As in any fire, wear complete fire service protective equipment, including full-face MSHA/NIOSH approved or equivalent self-contained breathing apparatus. Use water to cool fire-exposed container/structure/protect personnel. FIRE AND EXPLOSION HAZARDS: Can release vapors that form explosive mixtures. Vapors can travel to a source of ignition and flash back. Closed containers may explode when exposed to extreme heat (fire). Toxic vapors may be given off in a fire. 6 SPILL AND LEAK PROCEDURES Stop spill/leak if no risk involved. Avoid breathing vapors. Use an inert absorbent to complete a clean-up. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations. 7 HANDLING AND STORAGE HANDLING: Avoid prolonged or repeated breathing of vapors, mists or fumes. Do not get on skin, in eyes or on clothing. Wash thoroughly after handling. STORAGE: Keep in a closed, labeled container within a cool (well-shaded), dry, ventilated area. Protect from physical damage. Keep containers closed when material is not in use. Maintain good housekeeping. OTHER: Keep away from heat and open flame. Do not use until manufacturer's precautions have been read/understood. 8 EXPOSURE CONTROLS/PERSONAL PROTECTION

PRODUCT NAME: 3333 Shipendec Newport Green PAGE 4 OF 4 8 EXPOSURE CONTROLS/PERSONAL PROTECTION ENGINEERING CONTROLS: Ventilation is normally required when handling or using this product to keep exposure to airborne contaminants below the exposure limit. Facilities storing or utilizing this product should be equipped with an eyewash facility. RESPIRATORS: Ensure fresh air entry during application and drying. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH/MSHA approved or equivalent) during and after application. Follow respirator manufacturer's directions for respirator use. Close container after each use. A repiratory protection program that meets OSHA 1910.134 and NIOSH 42 CFR 84 requirements must be followed whenever workplace conditions warrant a respirator's use. PERSONAL PROTECTIVE EQUIPMENT: Industrial safety glasses at a minimum. As necessary for work area conditions: use side shields, goggles, or faceshield. As required, chemical resistant flexible-type gloves (heavy duty neoprene or equal). Wear industrial-type work clothing and safety footwear. Depending on working conditions, i.e., contact potential, wear resistant protective garments such as head/neck cover, aprons, jackets, pants, coveralls, boots, etc. 9 PHYSICAL AND CHEMICAL PROPERTIES Weight Per Gallon (lbs): 9.200 % VOL by Weight.: Not determined Vapor Density.: (Air=1)>1 Boiling Point...: Not determined Vapor Pressure: Not determined Evaporation Rate: (ether=1)<1 ph...: Not determined Specific Gravity: > 1 Solubility In Water: Negligible Viscosity...: Not determined VOC Content...: 379 g/l as supplied; 456 g/l as applied 10 STABILITY AND REACTIVITY DATA STABILITY: None HAZARDOUS POLYMERIZATION: None INCOMPATIBILITY: Avoid oxidizing agents, heat, sparks and open flames. HAZARDOUS DECOMPOSITION PRODUCT(S): Carbon monoxide, carbon dioxide upon thermal decomposition. 11 TOXICOLOGICAL INFORMATION Contact Kop-Coat for applicable information. 12 ECOLOGICAL INFORMATION

PRODUCT NAME: 3333 Shipendec Newport Green PAGE 5 OF 4 12 ECOLOGICAL INFORMATION Product has not been tested for ecotoxicity. 13 DISPOSAL CONSIDERATIONS This product as supplied is a USEPA defined ignitable hazardous waste. Dispose of unusable product as a hazardous waste (D001) in accordance with local, state and federal regulations. 14 TRANSPORTATION INFORMATION DOT PROPER SHIPPING NAME: Consumer commodity DOT HAZARD CLASS: ORM-D LABEL: None DOT IDENTIFICATION NUMBER: None DOT information for domestic ground transportation. 15 REGULATORY INFORMATION No information available. 16 OTHER INFORMATION NOTE: The petroleum distillate (CAS# 64742-95-6) may contain approximately 7% xylene, 3% cumene and 40% trimethylbenzene. NOTICE: While the information and recommendations set forth herein are believed to be accurate as of the date hereof, Kop-Coat, Inc. makes no warranty with respect thereto and disclaims all liability from reliance thereon. PREPARED BY: L. Briggs Manager Environmental and Regulatory Affairs