KINGWELL OILFIELD DST

KINGWELL OILFIELD DST

KINGWELL OILFIELD DST GEOGRAPHICAL SPREAD & CONTACTS UAE Main Offices U.A.E Canada India Libya Qatar Iraq Yemen Egypt Iran Oman Saudi Arabia Bangladesh Tanzania Malaysia Kuwait Russia

PRODUCE&SERVICES PROVIDED hoil & GAS PRODUCTION/EXPLORATION WELL TESTING hproduced WATER TREATMENT hintegrated WELL SERVICES hdrill STEM TESTING hprocess ENGINEERING AND DESIGN hpvt and CORE ANALYSIS

EQUIPMENT Test Separator Offshore Burner Boom Onshore Burner Boom Green Burner Head Choke Manifold Oil / Gas Manifold ESD Panel Safety Valve Heater Flexible Hose Lab Cabin SCADA Electronic Data Acquisition Loading Gantry Crude Oil Storage Tank Oil Re-Injection Pump Mobile well Test Packages Surge Tank Pressure Tank Vertical Flare Stack Water Treatment Unit HT 400 TRIPLEX PUMP Multi-Stage Pump Pressure Test System Air compressor and Generator Acid Neutralization Unit Chemical Injection Pump Duplex Cartridge Filter Unit Hydro cyclone and Accumulator Skid Strainer Package Sand Monitoring System Surface Test Tree Transfer Pump Acid Pumping Unit

SURFACE TEST TREE 10k and 15k Surface Test Tree Complete with the following; Master Valve Kill Valve Crown Valve Wing Valve: hydraulic operated Swivel assembly Certified for sour service Connections Existing 5-4 Stub ACME - 2G Box on top of Flow Head Stiff Joint top 4-1/2 EUE Pin (available) Crossover 4-1/2 CS Hydril Pin top (available) Crossover 3-1/2 PH-6 Hydril Pin top (available)

SAFETY VALVE Emergency Shut Down Valve 3 X 5K, 10k and 15k Hydraulic valve Certified for Sour Service

ESD PANEL HYDRAULIC & PNEUMATIC Equipped with remote shut down stations enabling complete shut down of the well in an emergency

CHOKE MANIFOLD 3 X 5K, and 10K, and 15 K Choke Manifolds Equipped with Adjustable and Positive Chokes Designed with four gate valves Certified for Sour Service

OIL AND GAS MANIFOLD 3 X 5 Way Oil Manifold (1500 PSI WP) 3 x 3 Way Gas Manifold (1500 PSI WP) NACE - MR-01-75

TEST SEPARATOR Three Phase Test Separator 2160 PSI, 1440 PSI, 720 PSI Equipped with Safety Relief Valves and Necessary Instrumentation Certified for Sour Service NACE MR-01-75 ASME

HEATER KINGWELL OILFIELD DST 2MM BTU/Hr and 4MM BTU/Hr. Line Heater Diesel / Gas Fired 3 X 5K

HEAT EXCHANGER 5 MM BTU/HR. Heat Exchanger 5MM BTU/hr 3 x 10K With adjustable choke & steam generator

BURNER BOOM Offshore Burner Booms 60 and 90 lengths Equipped with Electronic ignition. Equipped with Green Burner Heads, each capable of handling 5000 bbls/d

ONSHORE BURNER BOOMS KINGWELL OILFIELD DST KINGWELL OILFIELD DST Available on 15 skids Complete with Green Burner Heads for clean and efficient burning Electronic ignition and continuous pilot

STEAM GENERATOR The CLAYTON Steam Generator is manufactured in conformance with the American Society of Mechanical Engineering (ASME) Power Boiler Code, Section I Manufactured by : CLAYTON INDUSTRIES Model No. E-200 Steam Heat Generator

HP FLEXIBLE HOSE KINGWELL OILFIELD DST ID = 3 (76.20 mm) OD = 5.65 (143.50 mm) Minimum bending radius - for storage 0.88 m - in service 1.32 m Weight (in air empty) = 49 kg/m Working Pressure = 10,000 psi Test Pressure = 15,000 psi Working Temperature = -20 o C/+100 o C Bureau Veritas witnessed and certified 24 hours pressure test Lifting/Handling collar at each end Length = 60 feet (-0/+2 feet)

LAB CABIN Skid Mounted Lab KINGWELL OILFIELD DST KINGWELL OILFIELD DST Onshore & Offshore Operations Equipped with Necessary Accessories and Instrumentation for Well Testing Services Zone I Zone II

CRUDE OIL STORAGE Skid Mounted Tanks 400 BBLS Capacity Equipped with Sight Glasses and Vent Lines

SURGE TANK 100 bbls capacity 100 psi w.p. Equipped with sight glasses Fluid Accumulation and degassing

SURGE TANK Skid Mounted 50 bbls Capacity 50 psi W.P. Designed for fluid accumulation and measurement during the testing of low producing wells Useful for Meter Calibration

VERTICAL FLARE STACK 60 and 100 High Equipped with electronic ignition KINGWELL OILFIELD DST 8 gas line 3-4 vent lines Certified for sour service

KINGWELL OILFIELD DST PRESSURE TEST SYSTEM MWP of 20K psig Rate of 15 Gal/min Power 460 Volt Cycle 60 Hz Current 50 Amps

CHEMICAL INJECTION PUMP Unit with Dual HASKEL Pumps and Relief ( G-series-100 ) Air drive system (Min. 15 psi, Max. 125 psi) 1 ID inlet fluid supply pipe Max. output pressure : 10000 psi with 3 GPM Stainless steel frame

HYDROCYCLONE & ACCUMULATOR PACKAGE Design Pressure Design Temperature Flow Rate Filter 15000 psi 50 to 250 F 5000 bbls/d @ 30 MMSCF/D 500 bbls/d @60 MMSCF/D 25 microns

Skid Strainer Package (15 K) Design Pressure : 15,000 psi ( @ 350 F) Design Temperature : 50 350 F - The Y-Type strainer is used to remove solids from the process stream and is normally connected downstream of the hydrocyclone

TRANSFER PUMP Power 460 V & 60 Hz KINGWELL OILFIELD DST NACE MR- 01-75 Maximum Flow Rate 5,000 BPD and 10,000 BPD 50 PSI Discharge Pressure 60 HP Explosion proof motor and starter switch Skid mounted This pump is used to transfer oil/diesel

Plunger Size 3-1/2 Plunger Size 4-1/2 KINGWELL OILFIELD DST ACID PUMPING UNIT Maximum Working Pressure Maximum Flow Rate Minimum Flow Rate Maximum Working Pressure Maximum Flow Rate Minimum Flow Rate : 10,394 psi : 273 GPM @ 700 psi : 55 GPM @ 4500 psi : 6,288 psi : 312 GPM @ 700 psi : 96 GPM @ 4,500 psi Batch Mixing and Blending Skid with 2 x 60 barrel Blending Tanks complete with Acid Additives Complete set of 3 / 2 x 5000 psi WP and 3 / 2 x 10,000 psi WP Piping, Elbows, Chicksans & X-Overs. 3 x 10,000 psi WP Coflexip Hoses (H2S, CO2 and Acid Service) Laboratory with complete test facility equipment

OFFSHORE AND ONSHORE DST SERVICES PROVIDED hcased HOLE hfullbore DRILLSTEM TESTING hslim HOLE DRILLSTEM TESTING hconventional ( MECHANICAL ) DRILLSTEM TESTING KINGWELL OILFIELD DST hopen HOLE CONVENTIONAL ( MECHANICAL ) DST

KINGWELL OILFIELD DST Drill Stem Test RTTS Packer The RTTS packer is a full-opening, hookwall packer used for testing, treating, and squeeze cementing operations. In most cases, the tool runs with a circulating valve assembly RTTS Safety Joint The RTTS safety joint is an optional emergency backoff device. The safety joint releases the workstring and tools above the packer if the packer becomes stuck during operations FUL-FLO Hydraulic Circulating Valve The FUL-FLO hydraulic circulating valve serves as a bypass around the packer or as a circulating valve to circulate a well after testing Internal Pressure-Operated (IPO) Circulating Valve The internal pressure-operated (IPO) circulating valve is a single-shot circulating valve which allows circulation through the workstring before trip-out and serves as a drain valve during trip-out. It can be run in cased holes or openholes and maintains a full bore through the tool Repetitious Circulating Valve The Repetitious circulating valve is an annulus pressure- operated, recloseable circulating valve. Throughout the operation, the tool is repeatedly cycled up to a predetermined annulus pressure and then released RTTS Circulating Valve The RTTS circulating valve is a locked-open/locked-closed valve that serves as both a circulating valve and bypass Rupture Disk (RD) Safety Circulating Valve The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve Tester Valve The Pressure Operated tester valve is a full- opening, annulus pressure-operated valve. It measures multiple closed-in pressures in cased holes where pipe manipulation is restricted and a full-opening string is required Test Tools Select Tester Valve The Select Tester valve is a full-opening, annulus pressure-operated tool Tubing String Testing (TST) Valve The tubing string testing (TST) valve is a full-opening valve used to pressure-test the workstring while running in the hole Rupture Disk (RD) Tubing String Testing (TST) Valve The rupture disk (RD) tubing string testing (TST) valve is a full-opening valve used to pressure test the workstring while running in the hole Round Mandrel Slip joint

KINGWELL OILFIELD DST Drill Stem Test The rupture disk (RD) tubing string testing (TST) bypass valve is a weight- activated, normally open valve Shock Absorber Shock absorbers protect pressure-measuring equipment or other sensitive components in the workstring for shock loads transmitted through the workstring by firing of TCP guns Hollow Plug Impact Reversing Sub The hollow plug impact reversing sub is used in the more difficult operations where depth and high-pressure differential across the plug sometimes make it difficult to open a conventional reversing sub HYDROSPRING Tester The HYDROSPRING tester was developed to provide a reliable and field-proven downhole master valve VR Safety Joint The VR safety joint is a compact, right- hand safety joint used in the drillstem testing string Normal Technical requirements Pressure:70Mpa(10000PSI) 105MPA(15000PSI) Temperature:400F Service: Inner H2S,Full H2S Connection thread: As per API or requirements

Annulus Pressure is Applied to Open the Tester Valve The Packer is Set Several methods can be used to Fire TCP Guns KINGWELL OILFIELD DST At the end of the Test any of the Circulating Valves may be used to Reverse Out the String Releasing the Annulus Pressure, Closes the Tester Valve for a Build Up The Well will then be flowing Fullbore TCP / DST / Well Test in Casing

Full Bore and Slim Hole Full Bore Expansion Joint Full Bore SS Exit Valve Full Bore MC Circulating Valve KINGWELL OILFIELD DST Full Bore MC Tester Valve Full Bore Gauge Carrier Full Bore Hydraulic Jar Full Bore Safety Joint Full Bore Test Packer DST Tools TYPICAL FULLBORE DST ASSEMBLY 33

CA SING DR ILL PIPE DR ILL COLLARS R/A MARKER SUB FU LL BORE CIRCULATING VALVE, DR ILL COLLAR FU LL BORE CIRCULATING VALVE, FULL BORE KILL VALVE, FU LL BORE CIRCULATING VALVE, DR ILL COLLAR FULL BORE GAUGE CARRIER, FU LL BORE TESTER VALVE, CA S ING DRILL PIPE DRILL COLLARS R/A MARKER SUB FULL BORE CIRCULATING VALVE, DRILL COLLAR FULL BORE CIRCULATING VALVE, FULL BOR E KI LL VALVE, FULL BORE CIRCULATING VALVE, DRILL COLLAR FULL BOR E GAUGE CARRIER, FULL BORE TESTER VALVE, 15,000 psi 350 deg F 3-1/8 OD x 1-1/8 ID for use in 5, 5-1/2 csg 5 OD x 2-1/4 ID for use in 7, 9-5/8 csg FO RM ATION TO BE TESTED CA SED HOLE TCP / DST SHOOT & TEST FULLBORE 2.25 ID TOOLS FULL BORE H YDR AULI C JAR FULL BORE GAUGE CARRIER, FU LL BORE SAFE TY JOINT PR ESSURE TRANSFER SUB FU LL BORE CASING PACKER PORTED SUB AD APTER SUB BELOW PACKER SAFETY J OINT TU BING JOINT SH OCK ABSORBER TU BING JOINT HY DRAULIC FIRING HEAD BLANK SAFETY SPACER LOADED & BLANK PERF GUN BU LL NOSE PERFO RATIO N S CASED HOLE DST FULLBORE 2.25 ID TOOLS FULL BOR E HYDRA ULIC JAR FULL BOR E GAUGE CARRIER, FULL BORE SAFETY JOINT FULL BORE CASING PACKER FLO W PORTS RECORDER FLOW SUB W/ RECORDER S "O UTSIDE"

CASING O PEN HO LE DRILL PIPE DRILL COLLARS DROP BAR REVERSE CIRCULATING SUB DRILL COLLARS T UBING PRESSURE ACTIVATED R EVERSE CIR CULATING SUB CROSSOVER SUB RECORDER CARRIER W/ RECORDER "INSIDE" TESTER VALVE, SLIDING SLEEVE TYPE SAMPLER RECORDER C ARR IER W/RECORDER "INSIDE" HYDRAULIC JARS SAFETY J OINT FULL BORE CASING PACKER FL OW P ORTS RE CORDER FLOW SUB W/ RECORDERS "OUTSI DE " O PEN HO LE O PE N HO L E DRILL PIPE DRILL COLLARS DROP BAR REVERSE CIRCULATING SUB DRILL COLLARS TUBING PRESSURE ACTIVATED REVER SE CIRC ULAT ING SUB CROSSOVER SUB RECORDER CARRIER W/ RECORDER "IN SIDE" SHUT-IN TOOL, ROTATIONAL SLIDING SLEEVE TYPE SAMPLER TESTER VALVE, SLIDING SLEEVE TYPE RECORDER CARRIER W/RECORDER "IN SIDE" HYDRAULIC JARS SAFETY JOINT PA CKER PA CKER FL OW PORTS RECORDER FLOW SUB W/ RECORDERS "OUTSI DE" PERFORATED ANCHOR(TAILPIP E) O PEN HO LE O PEN HO LE DRIL L PIPE DRIL L COLLARS DRIL L COLLARS RE CORDER CARRIER W/ RECORDER "INS IDE " SHUT- IN TOOL, ROTATIO NAL SLIDING SLEEV E TYPE SAM PLER TES TER VALVE, SLIDING SLEEVE TY PE RE CORDER CARRIER W/R ECO RDER "INS IDE " HY DRAULIC JARS SAF ETY JOINT STRADDLE BYPASS PACKER PACKER FLOW PORTS RECORDER FLOW SUB W/ RECO RDERS "OUTSIDE" PERFORATED ANCHOR( TAI LPI PE) STRADD LE BYPASS RECEIVE R PACKER PACKER PERFORATED ANCHOR( TAI LPI PE) F O RM ATIO N TO BE TE STE D 5 OD Mechanical Tools for use in 8-1/2, 12-1/4 Open hole 5 OD Mechanical Tools for use in 7, 9-5/8 csg KINGWELL OILFIELD DST CASED HOLE DST BAREFOOT TEST CONVENTIONAL TOOLS OPEN HOLE CONVENTIONAL BOTTOM HOLE TEST ON PENETRATION BULL NOSE PERFORATED OPEN HOLE CONVENTIONAL STRADDLE TEST B ULL NO SE W ITH BE LO W S TRADD LE R EC ORD ER

Select Tester valve The Select Tester valve is a full-opening, annulus pressureoperated tool. with applied pressure, the tool can be locked open and then returned to the normal operating sequence at any time. The ball valve operates independently of pressure changes from operations such as acidizing and fracturing. This gives the Select Tester valve greater compatibility and flexibility with other tools in the string.

5'' OMNI Valve KINGWELL OILFIELD DST Detailed Product Description Halliburton type OMNI Valve, all could change with Halliburton parts. DST circulating Valve 15000PSI above 175F H2S&Acid service The Repetitious circulating valve (OMNI Valve) is an annulus pressure operated, recloseable circulating valve. Throughout the operation, the tool is repeatedly cycled up to a predetermined annulus pressure and then released. The Repetitious valve consists of a nitrogen section, an oil system, a circulating valve, and a ball valve. The nitrogen section contains the nitrogen gas that counter balances the hydrostatic and annulus pressures. The amount of nitrogen in the tool depends on well hydrostatic (mud weight and depth) and downhole temperature. This information must be known to properly prepare the tool for running in. Note: With certain completion fluids, the mud weight at the surface can be significantly different from the actual mud weight downhole. The operating and control mechanisms are contained in a closed oil system activated by annulus pressure acting on the nitrogen chamber, allowing an unlimited number of pressure cycles. The circulating valve and the ball valve work together to keep circulating pressure off the formation. The ball valve will close before the circulating valve opens. The ball valve closes off the

KINGWELL OILFIELD DST 5'' LPR-N valve Detailed Product Description Halliburton type, all could change with Halliburton parts.pressure Poerated tester valve (LPR-N valve) is annulus operated valve The Pressure Poerated tester valve (LPR-N valve) is a full- opening, annulus pressure-operated valve. It measures multiple closed-in pressures in cased holes where pipe manipulation is restricted and a full-opening string is required. The nitrogen chamber is charged at the surface to a selected pressure determined by surface temperature, bottomhole temperature, and bottomhole pressure. If the intended test requires a permanent packer that uses a stinger mandrel or seal nipple, a variety of bypass tools are available, depending on field application, to help ensure that the formations and downhole equipment are protected from excessive pressure buildup.

5'' RD Safety Circulating Valve Detailed Product Description The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve. The rupture disk (RD) safety circulating valve functions as both a safety valve and circulating valve. The tool functions as a safety valve when the annulus pressure reaches a predetermined value. At that pressure, the valve isolates the workstring below the tool and establishes communication between the annulus and the workstring above the tool. This tool converts into a circulating valve when the ball valve section is removed. KINGWELL OILFIELD DST

KINGWELL OILFIELD DST RTTS Safety Joint 1.Halliburton type, all could change with Halliburton parts. The RTTS safety joint is an optional emergency backoff device.the safety joint releases the workstring and tools above the packer if the packer becomes stuck during oprations.

5"Round Mandrel Slip Joint 5"Round Mandrel Slip Joint Detailed Product Description 1.Halliburton type, all could change with Halliburton parts. 2.DST Round Mandrel Slip Joint are H2S&Acid service. The round mandrel slip joint,like other slip joints, accepts the movement associated with ocean heave or temperature change without allowing the movement to disturb the placement of downhole tools.

DST TOOLS PARTS KINGWELL OILFIELD DST

RTTS PACKER KINGWELL OILFIELD DST KINGWELL OILFIELD DST

KINGWELL OILFIELD DST KINGWELL OILFIELD MACHINERY CO.LTD TOP Oil Tools Supplier Tel:(86-29)88601839 Fax :(86-29)88601839 E-mail: jerrywang : kingwell@kingwelloilfield.com Linda: sales@kingwelloilfield.com SKYPE: xakingwell MSN: kingwelloilfield@hotmail.com