STIH) Technical Information 8.00 Accessories for STIHL cut-off machines / drills Contents. New pressurized water tank. Summary. New pressurized water tank The previous pressurized water tank 4 670 600 is replaced by the new version 0000 670 6000. Spare parts The previous pressurized water tank 4 670 600 is no longer available. All individual parts for the previous pressurized water tank 4 670 600 remain available. TI_8_00_0_0_0.fm englisch / English
Page Technical Information 8.00. Assembling the pressurized water tank. Unlocking the pump handle 4 70TI077 KN 70TI079 KN. Observe safety instructions when dealing with the pressurized water tank, see Instruction Manual. Insert hose () with screen () in the discharge opening () on the bottom of the pressurized water tank. Attach union nut (4) to the discharge opening and tighten by hand. Turn the pump handle () approx. /4 turn to the left or right until it is in the middle position.4 Inspecting the pressurized water tank Carry out a visual inspection. Locking the pump handle 70TI078 KN. Press down the unlocked pump handle () and turn approx. /4 turn to the left or right until it snaps into place. Check that the pressurized water tank (), pump () and hose () are in good working order prior to use 70TI080 KN TI_8_00_0_0_0.fm
Technical Information 8.00 Page Inspect the safety valve 4. Pressurize the tank move the unlocked pump handle (4) of the empty pressurized water tank () up and down approx. 0 times 70TI08 KN. Unscrew the pump () from the pressurized water tank () by continuing to turn it counterclockwise 70TI084 KN 5. Pull the red knob of the safety valve (5) pressure must escape audibly 70TI08 KN. Fill the tank with water do not exceed the maximum capacity (see b.7) 70TI085 KN.5 Filling the pressurized water tank. Pull up the red knob of the safety valve until the pressurized water tank is depressurized. Screw the pump () into the pressurized water tank () 70TI08 KN 70TI086 KN. If necessary. push the pump handle () down and turn it counterclockwise until the pump handle () snaps into position and is locked TI_8_00_0_0_0.fm
Page 4 Technical Information 8.00 After use. Disconnect the quick-action coupling from the cut-off machine or drill used. Pull up the red knob of the safety valve until the pressurized water tank is depressurized. Empty the pressurized water tank. Pressurize the tank move the unlocked pump handle () up and down several times stop before the maximum operating pressure is reached (see b.7) If the maximum operating pressure is exceeded, the safety valve releases the excess pressure.. Press the pump handle down and lock it (see b.).6 Using the pressurized water tank 70TI087 KN. For drying and storage, keep the pressurized water tank in a dry, frost-free environment where it is shielded from the sun's rays. If necessary, unscrew the hose and clean the screen under running water.7 Specifications Max. capacity: Total contents: Max. operating pressure Empty weight: Tank material: 0 l (.6 gal.).5 l (. gal.) bar (4.5 PSI).7 kg (6 lb) Polyethylene 70TI088 KN. Connect the quick-action coupling () on the hose of the pressurized water tank with the water connection () on the cut-off machine or drill used. Open the shut-off cock on the cut-off machine or drill used the water begins to flow. If the pressure in the pressurized water tank falls to < 0.5 bar (7 PSI), the tank must be pumped up again. If the pressurized water tank is empty, it must be refilled TI_8_00_0_0_0.fm
Technical Information 8.00 Page 5. Summary 4 7 9 5 6 8 0 6 7 8 9 0 4 5 4 70TI089 KN Left: previous pressurized water tank 4 670 600 Right: new pressurized water tank 0000 670 6000 Item Part Name Previous New Rem. Pressurized water tank (complete): 4 670 600 - - - ) including Items,,, 4, 6, 7, 8, 9, 0,,, 7, 9,, Pressurized water tank (complete): - - - 0000 670 6000 including Items 5,, 4, 5, 6, 8, 0,,,, 4 Water tank; 4 670 600 - * - ) including Items, Sleeve (set of ) 4 677 800 - - - ) Insert 4 678 600 - - - ) 4 Handle; 4 670 7700 - - - ) including Item 6 5 Handle - - - 0000 670 7700 6 O-ring A 4x.78-NBR70 9645 945 7560 - - - ) 7 Filler cap; 4 670 8600 - - - ) including Item 8 8 O-ring A 56.5x5.-NBR70 9645 945 840 - - - ) 9 Piston; 4 670 800 - - - ) including Item 0 0 O-ring A 7.5x.5-NBR70 9645 945 7958 - - - ) Pump barrel; 4 670 6600 - - - ) including Item Pump barrel; including Items 4, 5, 6 - - - 0000 670 6600 TI_8_00_0_0_0.fm
Page 6 Technical Information 8.00 Item Part Name Previous New Rem. Valve 4 678 600 - - - ) 4 Valve - - - - * - 5 O-ring N 46.99x5.-NBR70 - - - - * - 6 Funnel - - - 0000 676 0500 7 Valve; 4 670 5000 - - - ) including Item 9 8 Valve; - - - 0000 670 5000 including Item 0 9 O-ring A 8.76x.78-NBR70 9645 945 7494 - - - ) 0 O-ring N 7x.5-NBR70 - - - - * - Hose 4 m ( ft) 409 678 00 409 678 00 Hose; - - - 0000 670 000 including Items,, Screen - - - 0000 670 0400 Coupling sleeve /" 40 670 700 40 670 700 4 Warning pictogram - - - 0000 967 704 Set of gaskets; including Items 4, 5, 0 - - - 0000 007 600 Modification to be introduced : continuously Remarks ) Previous version is no longer available from factory ) Previous version of part remains available for older versions ANDREAS STIHL AG & Co. KG, 00 Technical Documentation D/MTK-fr TI_8_00_0_0_0.fm