LAMBERT EZELL DURHAM ARCHITECTURE, LLC P.O. Box 934 401 East College St. Florence, Alabama 35631 www.ledarchitecture.com Telephone: (256) 767-7100 REQUEST FOR PROPOSAL FOR FLORENCE MIDDLE SCHOOL FLORENCE, ALABAMA FFE PACKAGE OCTOBER 31, 2018 Reference the attached "Request for Proposal for: Florence Middle School, Florence, Alabama FFE Package" documents as follows: - Specification Section 12 06 40 - Furnishings and Accessories, dated 10-1-18 - Vendor Lists in the following categories, dated 10-1-18: 1) Student Desks, Chairs, etc. (Vendor Lists 001-006) 2) Performing Arts Furnishings (Vendor Lists 007-009) 3) Metal Office Furniture (Vendor Lists 010-020) 4) Wood Office Furniture (Vendor Lists 021-025) 5) Miscellaneous Furniture and Accessories (Vendor Lists 026-033) 6) Outdoor Furniture (Vendor Lists 034-035) - Vendor List Log, dated 10-1-18 - Drawings - FFE Floor Plans, sheet numbers FFE 1-8, dated 10-1-18 You are invited to submit proposals for any or all categories. (Partial category proposals are not acceptable.) Proposals must be submitted according to the terms and conditions outline in the attached documents. Proposals are due by 3:00 p.m. CST on November 12, 2018 at the office of The Florence City Schools, Board of Education, 102 South Court Street, Sixth Floor, Florence, Alabama 35630. Submit questions in writing to Rebecca Meeks at the address above or via email at ermeeks@ledarchitecture.com
LED/1417 FLORENCE MIDDLE SCHOOL FFE PACKAGE October 1, 2018 SECTION 12 06 40 FURNISHINGS AND ACCESSORIES PART 1 GENERAL 1.1 General Conditions: The Owner is the Florence City School System. A. The Owner reserves the right to decline all RFPs and not award the Project, or any portion thereof. The Owner may also elect to delete some items from any accepted Proposals, or to request pricing to add other items to any accepted Proposal based on the same pricing structure for bid items. B. Products are to be scheduled for delivery to the project site and for commencement of installation on Monday, January 28, 2019 unless otherwise directed by the Architect or Owner in writing. The Owner reserves the right to extend the date further into the calendar year. Work is to be completed (within fifteen (15) business days from the time the installation begins) by February 15, 2019, or as may otherwise be directed by the Owner. C. Drop shipments at the site are acceptable, but must be coordinated with the Architect and Owner and documented via written confirmation. D. Products not "drop shipped" are to be stored by the Installing Dealer, at no cost to the Owner, and delivered to the site as per Paragraph 1.1.B. E. All deliveries to the project site are subject to access restrictions as may be determined by the General Contractor for construction of the building. F. Prospective bidders must be on the "State Examiners of Public Accounts" approved list or on a "State of Alabama Purchasing Contract." G. The Owner will pay all invoices via credit card, but will not pay a credit card fee for any charges. If alternative methods of payment are required by an Installing Dealer, they must be clearly stated in the bid proposal in a cover letter addressed to the Owner. H. Prior to commencing with the installation of any items, each Installing Dealer will be required to submit an itemized list of pre-existing damage in the building, as per Paragraph 3.1.E. I. The terms "Request for Proposal," "RFP," "Bid," and the like, shall be construed to be one and the same and may be used interchangeably. J. The FFE Package "Vendor Lists" are subdivided into categories. 1. Dealers are not required to submit proposals for all categories. 2. Dealers are not limited limited to any particular category. 3. Dealers may submit proposals for any or all of the categories. 4. Dealers must submit proposals for complete categories, including all of the items in the category. FURNISHINGS AND ACCESSORIES 12 06 40-1
LED/1417 5. Dealers are to fill out individual Vendor Lists in their entirety (dealer name/address/contact information, unit prices, extended prices, shipping and/or installation prices (where applies), order total) and submit with their proposals. 6. Dealers are to note and include on Vendor Lists any additional items required and cost for same to provide a complete installation, as per the Specification. 7. Dealers are to fill out the Vendor List Log in its entirety for the applicable Vendor Lists for which they are submitting pricing. K. Submit questions or requests for additional information to the Architect in writing. 1.2 Related Documents: Specifically reference the Vendor Lists and the Furniture, Fixtures, and Equipment Plan (FFE Plan) Drawings: FFE 1 - FFE 8, dated 10-1-18. 1.3 Description of Work: A. Provide all labor, materials, tools, equipment, accessories and incidentals to install complete in every respect the FFE Package as shown on the plans and as described herein. B. The FFE Package shall include, but is not limited to, the following Section 12 06 40 requirements, Vendor Lists, and the project Drawings relating to existing and new Furnishings and Accessories. C. The terms "Furniture, Fixtures, and Equipment" and "FFE Package" and "Furnishings and Accessories" shall all be construed to be one and the same and are used interchangeably. D. Where the terms "Contractor" and "Installing Dealer" and "Dealer" are used, any and all requirements of the one shall also apply to the others. E. Where the terms "Contractor" and "Installing Dealer" and "Dealer" are used, they shall be construed to be one and the same unless specifically distinguished from one another or specifically noted otherwise. 1.4 Contractor's Qualifications: The Contractor must have successfully completed at least five other projects of a similar nature, the dollar value of each being at least 75% of the dollar value of this project. The Contractor must also maintain a full-time service department with service contracts for work installed, from a shop within 100 miles of the work, or must provide proof of a written service agreement with a firm meeting the above qualifications. 1.5 Responsibility of Bidders: A. Bidder shall examine all drawings and specifications issued and the Site of work. Bidders should be familiar with the character of work, coordination required with other trades, and any other conditions that affect the completion of this work. No consideration will be given at a later date other than that outlined herein, for any alleged misunderstanding as to the requirements of work, materials to be furnished, or any special requirements due to the nature of the job site. B. Items obviously omitted from the plans and specifications by oversight or error shall be called to the attention of the Architect before submitting bid. C. For products specified by naming only one product and manufacturer, there may be an option of an Architect approval of a product of an equal or greater quality. D. Substitutions: Contractor's Base Bid shall be per contract documents. 1. Substitutions will not be accepted without prior written approval of the Architect. Requests for substitutions must be submitted in writing to the Architect no more than five (5) business days prior to bid date. Burden of proof of equality of product rests solely with the bidder. Partial or incomplete submissions, which do not fully FURNISHINGS AND ACCESSORIES 12 06 40-2
LED/1417 address the compliance of proposed substitute products, will be rejected by Architect without comment. 2. Submit a separate request for each substitution. Support each request with: a) Complete data substantiating compliance of proposed substitution with requirements stated in contract documents. b) Product identification, including manufacturer's name and address. c) Manufacturer's literature, identify: (1) Complete product description, listing all features included, illustration, and actual finish samples, if different from those specified. Product sizes must also be provided. (2) Reference standards. (3) Performance and test data. (4) Name and address of similar projects on which product has been used. (5) Itemized comparison of the proposed substitution with product specified; list significant variations. (6) Any effect of substitution on separate contracts. (7) List of changes required in other work or products. (8) Designation of availability of maintenance services and sources of replacement materials. (9) Provide certification of product compatibility with adjacent materials. (10) Provide the actual sample of the proposed substitute which is like, in all respects, the specified item, if requested by the Architect. 1.6 Scope of Work: The Work shall include the furnishing of furnishings, systems, accessories, equipment, and materials specified in this Division and on the Vendor Lists to include: product, supervision, operation, methods, and labor for the fabrication, installation, tests, and final adjustments for the complete Furniture, Fixture, and Equipment (FFE) installation, and instructions to the Owner for the use of all items - chair adjustment features, etc. A. Drawings for the Work are diagrammatic, intended to convey the scope of the Work and to indicate the arrangement and locations of the Work. Because of the scale and nature of the Drawings, certain basic items such as top caps, connectors, bases, and conduit may not be shown. This Contractor shall be responsible for selecting nonspecified items required for a complete installation in accordance with the Contract Documents. This Contractor shall be responsible for providing and/or modifying equipment to fit the space provided. The location and sizes for FFE items and other basic items required by code and other sections shall be coordinated and included for the proper installation of the work. B. FFE Specification may not deal individually with minute items required such as components, parts, controls, and devices which may be required to produce the product performance specified or as required to meet the product warranties. Where such items are required, they shall be included by the supplier of the product, whether or not specifically called for in the Contract Documents. C. Where the word "provide," "furnish," "include," or "install" is used in the Specifications or on the Drawings, it shall mean to furnish, install, and test complete and ready for operations, the items mentioned. If an item is indicated in the Contract Documents, it shall be considered sufficient for including same in the Work. D. Where noted on the Drawings or where called for on the Vendor Lists, the Contractor for this Division shall install equipment in coordination with items furnished by Others, and shall make required service connections where applicable. Contractor shall verify with the supplier of the equipment the requirements for the installation. FURNISHINGS AND ACCESSORIES 12 06 40-3
LED/1417 E. Where items are noted as "keyed," "keyed alike," or "with lock," all lockable items within the same space, provided from the same manufacturer, are to be keyed alike, unless specifically designated otherwise by the Architect. F. Where "felt floor protectors," "felt glides," or similar items are listed in the product description, they are to be provided and installed by the Installing Dealer, whether or not they are a standard feature for the product item and whether or not they are provided by the manufacturer. 1.7 Codes and Standards: Conform to latest edition of governing codes, ordinances, or regulations of city, county, or state having jurisdiction. Include other Codes and Standards as individually referred to in the Technical Sections of the Specification. 1.8 Site Inspection: Contractor shall inspect the site and Drawings to familiarize himself with conditions of the site and requirements of the Drawings which will affect his work and shall verify points of connection with building features, data and power, routing product through building to include required clearances from any existing structures, and obstacles, protection of floors, coordination with the General Contractor for Construction for building access, etc. A. Extra payment will not be allowed for changes in the Work required because of Contractor's failure to make this inspection. 1.9 Wiring for Equipment: Data and/or electrical connections required for a complete and operable installation shall be provided by the Owner in coordination with this Contractor where such requirements are indicated on the Drawings and/or on the Vendor Lists. 1.10 Protection: Special care shall be taken for the protection of equipment furnished and the site. Equipment and material shall be completely protected from weather elements, painting, plaster, etc. until the project is completed. Damage from rust, paint, scratches, etc. shall be repaired as required to restore equipment to original condition. A. Where the installation or connection of equipment requires work in areas previously finished by other Contractors, the area shall be protected and not marred, soiled, or otherwise damaged during the course of such work. Contractor shall arrange with the other Contractors for repairing and refinishing of such areas, which may be damaged. B. Where the installation of equipment requires the transfer of heavy items and loaded dollies over finished flooring, temporary protective underlayment to prevent face damage and 1/2" plywood to prevent stress fractures shall be provided covering the entire trafficked area. PART 2 SUBMITTALS 2.1 General: Submit to the Architect within 30 days of Letter of Intent to Award Contract: A. Submit a minimum of three copies of FFE installation schedule and project conditions required for installation. B. Submit, upon completion of the work, copies of all product warranties and maintenance instruction for delivery to the Owner. 2.2 Operating and Maintenance Manuals: A. Provide three up-to-date copies of warranties, guarantees, specific operating and maintenance instructions, and actual finishes used on the Project in manuals for each FURNISHINGS AND ACCESSORIES 12 06 40-4
LED/1417 of the manufacturer's product groups. Include names, addresses, phone and fax numbers, and contact persons for each manufacturer and the designated service provider. B. Provide legible submittals made by permanent reproduction copy equipment from typewritten or typeset originals. C. Pre-punch and assemble 8-1/2 inch x 11 inch sheets for standard three ring binders; insert in hardback binders and label binders. D. Submit larger sheets folded or in rolled and protected packages. 2.3 Substitutions and Product Options: For products specified only by reference standard, select product meeting that standard, by any manufacturer, subject to Architect's approval. Burden of proof is upon the company proposing the substitution. All relevant information must be provided to the Architect to evaluate proposed substitutions. A. For products specified by naming specific products by specific manufacturers, proposed equal substitutions will be considered, unless specifically noted otherwise. B. For products submitted as "or equal," select products and manufacturers complying with all specifications. C. Products from "Dixie Tile and Carpet," "Sam's Club," and "Commercial Millwork and Specialty Company" may not be substituted, but are available to all bidders at the same price. Products and installation services to be provided from Dixie Tile and Carpet and Commercial Millwork and Specialty Company have been worked out between the vendors and the Architect. Pricing may be obtained directly from the vendors. Products from Sam's Club are in their standard product line as posted on their website. D. See Paragraph 1.5.D. E. Substitutions must comply with all of the specified manufacturer's standard features for an item, whether or not they are specifically listed in the item description. PART 3 EXECUTION 3.1 Pre-Installation Meeting: A. Two weeks (minimum) prior to the start of FFE installation or delivery of FFE to the project site, schedule and conduct a meeting with the following persons: Architect, General Contractor's Project Manager and Job Superintendent, Owner's Representative(s), FFE Contractor's Project Manager and Job Superintendent, and any other persons whom the Architect, General Contractor, Owner, or FFE Contractor request to attend. B. Critical installation coordination issues (such as working points, elevator access, building hours, code requirements, clearances, drawing notes, grommet installation, cord management, etc.) shall be reviewed. C. "Job standards" for finished product and installation items (such as building access coordination with other dealers or subcontractors, floor protection, documenting any building damage, attaching overshelf units to desks/credenzas, trash removal, item preparation and cleaning, locks/keying, Owner training, etc.) shall be reviewed. D. Other coordination and scheduling items shall be discussed as required or requested by participants. E. Prior to commencing work, each Installing Dealer shall submit to the Architect a written list documenting any building damage which could possibly be construed to be caused by their crews. Specifically, items such as damage to floors, doors, door frames, walls, etc. in the path of travel or rooms where the Installing Dealer will be working are to be FURNISHINGS AND ACCESSORIES 12 06 40-5
LED/1417 listed. Prior damage not listed will be subject to the General Contractor for construction making repairs according to the terms of his contract and invoicing the Installing Dealer. Commencement of work by the Installing Dealer shall be construed as acceptance of the building conditions. 3.2 Finishing: General: Prior to acceptance of the installation and final payment of the Contract, the Contractor shall perform the work outlined herein. A. Cleaning: At the conclusion of the construction, the site and structure shall be cleaned thoroughly of all debris and unused materials remaining from the FFE installation. All closed off spaces shall be cleaned of all packing boxes, wood frame members, and other waste materials used in the installation. B. All labels, stickers, tags, strings, protective coverings, etc., shall be removed from all fixtures and equipment. (Do not remove permanent name plates, equipment model numbers, ratings, etc.) 3.3 Tests and Demonstrations: Equipment shall be tested and placed in proper working order prior to demonstrating systems to Owner. A. Prior to acceptance of the FFE installation, demonstrate to the Owner or his designated representatives, all essential features and functions of all systems installed, and instruct the Owner in the proper operation and maintenance of such systems. The contract shall allow for five (5) working days to perform the demonstrations. B. Provide necessary trained personnel to perform the demonstrations and instructions. Provide manufacturer's representatives for systems as required to assist with the demonstrations. C. Dates and times for performing the demonstrations shall be coordinated with the Owner. 3.4 Anchoring of Furniture: Anchor furniture items such as overshelf units to other furniture items such as desks only after Owner and Architect have approved the final room set up containing such items. Anchor furniture items in such manner that they may be removed and relocated at a future date without damaging furniture. 3.5 System Guarantee: Work required under this Division shall include a one-year guarantee, or longer, as may be provided by specific manufacturers. Guarantee by Contractor to Owner to replace for Owner any defective workmanship or material, which has been furnished under contract, at no cost to the Owner for a period of one year from date of acceptance of systems. Guarantee shall also include all reasonable adjustments of systems required for proper operation during guarantee period. Guarantee shall not include normal preventative maintenance services or Owner requested changes to layout, components, or specified functions. Guarantee shall not negate any additional or extended guarantees and/or warranties offered by individual manufacturers for specific items. 3.6 Vendor Lists and Drawings: See Vendor Lists and FFE Drawings under separate cover. END OF SECTION 12 06 40 FURNISHINGS AND ACCESSORIES 12 06 40-6
LAMBERT EZELL DURHAM ARCHITECTURE, LLC P.O. Box 934 401 East College St. Florence, Alabama 35631 www.ledarchitecture.com Telephone: (256) 767-7100 VENDOR LIST #FMS - Category #1 VENDOR LIST LOG PROJECT NAME FLORENCE MIDDLE SCHOOL VENDOR LIST LOG FLORENCE, ALABAMA JOB NO. 1417 DATE 10/1/18 PAGE 1 OF 2 VENDOR LIST PRODUCTS INCLUDED TOTAL REMARKS 001 Virco Student desk chairs 002 Virco Student desks 003 Virco Teacher / some faculty chairs 004 Virco Fixed height metal stools 005 Virco Lectern / Presentation carts 006 Virco Cafeteria seating Category #2 007 Wenger 008 Wenger Choral risers 009 Wenger Costume racks Student music chairs, conductor stand, music sorting rack, sheet music storage Category #3 010 HON Teacher / some faculty desks and files (metal) 011 HON Faculty desks, files, tables, etc. (metal) 012 HON Admin metal files 013 HON Admin desk and conference chairs 014 HON Admin side chairs 015 HON Admin waiting benches 016 HON Family Consumer Science desks 017 HON CPU tables for Media Center 018 HON Panel systems for Career Cluster 019 HON 020 HON Cafeteria tables Lounge furniture for Reading areas (Media Center) SHEET TOTAL
LAMBERT EZELL DURHAM ARCHITECTURE, LLC P.O. Box 934 401 East College St. Florence, Alabama 35631 www.ledarchitecture.com Telephone: (256) 767-7100 VENDOR LIST #FMS - Category #4 VENDOR LIST LOG PROJECT NAME FLORENCE MIDDLE SCHOOL VENDOR LIST LOG FLORENCE, ALABAMA JOB NO. 1417 DATE 10/1/18 PAGE 2 OF 2 VENDOR LIST PRODUCTS INCLUDED TOTAL REMARKS 021 Indiana Desk Admin desks (wood) 022 Indiana Desk Admin conference tables (wood) 023 Indiana Desk Control booth counter (Auditorium) 024 Indiana Desk Lectern (wood) 025 OFS Pencil drawers Category # 5 026 Special T Folding tables 027 Commercial Millwork Cabinets for two collaboration rooms 028 Falcon Cafeteria bench seating 029 Dixie Tile & Carpet Area rug for Media Center 030 Claridge Markerboards 031 Rubbermaid Trash cans (desks, etc.) 032 Sam's Club Trash cans (large, interior) 033 Sam's Club Trash Cans (large, exterior) 034 Krueger Tables (Media Center, etc.) Category # 6 035 Ultrasite Benches (exterior) 036 Ultrasite Tables and seating (exterior) SHEET TOTAL
VENDOR LIST FMS - 001 Vendor: Virco Date: October 1, 2018 P.O. Box 5000 Highway 65 South Conway, AR 72032 800-448-4726, ext. 1406 Attn: John Havicus Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 1,878 N218 N2 Series Student Desk Chair; 20 3/8" W x 20 7/8" D x 32 1/4" H with 18" seat height; with semi-passive ergonomic flexible back; with felt non-marking floor tips; Chrome Legs / Frame; Shell: Black, BLK01 Tag: 3 each for Nurse's Office 1018 2 each for SRO Office 1020 72 each for (Large) Collaboration 1032 8 each for Project Room 1039 36 each for Maker Space 1040 12 each for CPU Workstations 1041 4 each for Media Testing 1045 30 each for Media Instruction 1046 1 each for Testing 1050 (Attendance Waiting) 2 each for Counselor 1055 2 each for Counselor 1056 4 each for (Counselor) Testing 1059 13 each for Virtual Classroom 1066 18 each for Special Ed 1070 30 each for 7th Math 1077 27 each for 7th Math 1083 27 each for 7th Math 1085 28 each for 7th Science 1088 28 each for 7th Science 1091 28 each for 7th Science 1095 30 each for 7th Science 1096
QTY. ITEM # DESCRIPTION UNIT EXTENDED 27 each for 7th English 1099 27 each for 7th English 1100 27 each for 7th English 1101 33 each for Collaboration 1105 18 each for Special Ed 1106 27 each for 7th Language 1107 27 each for 7th Social Studies 1122 27 each for 7th Social Studies 1123 28 each for 7th Social Studies 1124 2 each for AgriScience Office 1136 27 each for AgriScience Classroom 1137 1 each for Family Consumer Science Office 2007 1 each for CP Office 2016 1 each for CP Office 2017 28 each for Family Consumer Science 2009 27 each for Career Prep 2013 27 each for Career Prep 2019 21 each for Career Cluster Classroom 2020 29 each for Career Cluster 2021 1 each for CP Office 2022 8 each for Teacher Workroom 2026 40 each for Instructional Partner 2030 27 each for 8th Math 2031 27 each for 8th Math 2032 27 each for 8th Math 2035 27 each for Pathways 2039 27 each for Math Intervention 2044 27 each for Pathways 2045 28 each for 8th Science 2050 28 each for 8th Science 2051 30 each for 8th Science 2056 28 each for 8th Science 2057 27 each for Future Classroom 2059 27 each for Future Classroom 2060 27 each for Journalism 2063 33 each for Collaboration 2065 12 each for Special Education 2066 27 each for Reading Intervention 2067 27 each for 8th Foreign Language 2075 14 each for Special Education 2076 27 each for 8th English 2077 27 each for 8th Social Studies 2078 27 each for 8th English 2079 Page 2 of 3
QTY. ITEM # DESCRIPTION UNIT EXTENDED 27 each for 8th Social Studies 2080 27 each for 8th English 2081 28 each for 8th Social Studies 2082 2 each for PE Office 4015 2 each for Coaches' Office 4017 2 each for Coaches' Office 4022 2 each for PE Office 4024 1 each for Kitchen Office 5023 24 each for Visual Arts 6001 2 each for Chorus Office 6007 2 each for Band Office 6014 2 each for Music Library 6015 40 each for Chorus 6009 27 each for General Music 6032 30 each for Theatre Classroom 6045 250 each for Commons Storage 7022 30 HCT789 Transport Cart, for N218 chairs, 40" W x 20" D x 61" H, for quantity of 8 chairs Tag: 30 each for Commons Area Storage 7022 1 Installation Order Total: Page 3 of 3
VENDOR LIST FMS - 002 Vendor: Virco Date: October 1, 2018 P.O. Box 5000 Highway 65 South Conway, AR 72032 800-448-4726, ext. 1406 Attn: John Havicus Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 1,057 ZHEX ZUMA Student Desk; 33" W x 21 1/8" D with adjustable height range of 22" to 34"; may be configured in 6'-0" dia hexagonal groupings; with felt non-marking floor tips; Chrome Legs / Frame; Top: FRW Hard Plastic, Asian Sand, MPL08 (Light Tan / Off White wood grain); compatible with optional wire book basket and pencil tray Tag: 13 each for Virtual Classroom 1066 10 each for Special Ed 1070 30 each for 7th Math 1077 27 each for 7th Math 1083 27 each for 7th Math 1085 30 each for 7th Science 1096 27 each for 7th English 1099 27 each for 7th English 1100 27 each for 7th English 1101 33 each for Collaboration 1105 18 each for Special Ed 1106 27 each for 7th Language 1107 27 for 7th Social Studies 1122 27 for 7th Social Studies 1123 28 for 7th Social Studies 1124 27 each for AgriScience Classroom 1137 27 each for Career Prep 2015 27 each for Career Prep 2019 21 each for Cluster Classroom 2020
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 each for Career Cluster 2021 27 each for 8th Math 2031 27 each for 8th Math 2032 27 each for 8th Math 2035 27 each for Pathways 2039 27 each for Math Intervention 2044 27 each for Pathways 2045 30 each for 8th Science 2056 27 each for Future Classroom 2059 27 each for Future Classroom 2060 27 each for Journalism 2063 33 each for Collaboration 2065 27 each for Reading Intervention 2067 12 each for Special Education 2066 27 each for 8th Foreign Language 2075 14 each for Special Education 2076 27 each for 8th English 2077 27 each for 8th Social Studies 2078 27 each for 8th English 2079 27 each for 8th Social Studies 2080 27 each for 8th English 2081 28 each for 8th Social Studies 2082 27 each for General Music 6032 1 Installation Order Total: Page 2 of 2
VENDOR LIST FMS - 003 Vendor: Virco Date: October 1, 2018 P.O. Box 5000 Highway 65 South Conway, AR 72032 800-448-4726, ext. 1406 Attn: John Havicus Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 69 SGTASK 18P with Sage Series Task Chair (for teacher and faculty desks); 24 1/8" W x 24 1/8" D x 30-34 1/2" H 69 U9024CAST with 16" - 20 1/2" seat height; with semi-passive (1 set per chair) ergonomic back; with upholstered seat pad on ergonomically contoured plastic shell; pneumatic height adjustment; with five star base; with optional soft casters (U9024CAST) for hard floor; Shell: Black BRK01; Upholstery: Black BLK 261 Tag: 1 each for Nurse 1018 1 each for SRO 1020 1 each for (Large) Collaboration 1032 1 each for Tech Support 1064 1 each for (Large) Special Ed 1070 1 each for 7th Math 1077 1 each for 7th Math 1083 1 each for 7th Math 1085 1 each for 7th Science 1088 1 each for 7th Science 1091 1 each for 7th Science 1095 1 each for 7th Science 1096 1 each for 7th English 1099 1 each for 7th English 1100 1 each for 7th English 1101 1 each for Collaboration 1105 1 each for Special Ed 1106 1 each for 7th Language 1107 1 for 7th Social Studies 1122
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 for 7th Social Studies 1123 1 for 7th Social Studies 1124 1 each for AgriScience Office 1136 1 each for AgriScience Classroom 1137 1 each for Family Consumer Science Office 2007 1 each for Instructional Partner 2030 1 each for 8th Math 2031 1 each for 8th Math 2032 1 each for 8th Math 2035 1 each for Career Prep 2015 1 each for Career Prep Office 2016 1 each for Career Prep Office 2017 1 each for Career Prep 2019 1 each for Career Cluster Classroom 2020 1 each for Career Cluster Office 2022 1 each for Pathways 2039 1 each for Math Intervention 2044 1 each for Pathways 2045 1 each for 8th Science 2050 1 each for 8th Science 2051 1 each for 8th Science 2056 1 each for 8th Science 2057 1 each for Future Classroom 2059 1 each for Future Classroom 2060 1 each for Journalism 2063 1 each for Collaboration 2065 1 each for Special Education 2066 1 each for Reading Intervention 2067 1 each for 8th Foreign Language 2075 1 each for Special Education 2076 1 each for 8th English 2077 1 each for 8th Social Studies 2078 1 each for 8th English 2079 1 each for 8th Social Studies 2080 1 each for 8th English 2081 1 each for 8th Social Studies 2082 1 each for PE Office 4015 1 each for Coaches' Office 4017 1 each for Coaches' Office 4022 1 each for PE Office 4024 1 each for Kitchen Office 5023 1 each for Visual Arts 6001 1 each for Chorus Office 6007 1 each for Band Office 6014 1 each for Orchestra 6025 Page 2 of 3
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 each for Instr / Perc Rehearsal 6029 1 each for Guitar Classroom 6030 1 each for General Music 6032 1 each for Theatre Classroom 6045 1 each for Dance Classroom 6047 4 SGTASK18P Sage Series Task Chair, same as above, except with standard hard casters for (soft) carpeted floor Tag: 2 each for Control Room 6053 (Balcony) 2 each for Control Booth 6058 (Auditorium) 1 SGTASK28 Sage Series Stool, same as above, 1 U9024CAST (1 set) except for 36" H work surface, with 26"- 31 1/2" seat height and optional soft casters for hard floor Tag: 1 each for Family Consumer Science 2009 2 SGTASK28 Sage Series Stool, for 36" worksurface, with 26"-31 1/2" seat height; same as above, except for standard hard casters for (soft) carpeted floor Tag: 2 each for Circulation Desk 1047 1 Installation Order Total: Page 3 of 3
VENDOR LIST FMS - 004 Vendor: Virco Date: October 1, 2018 P.O. Box 5000 Highway 65 South Conway, AR 72032 800-448-4726, ext. 1406 Attn: John Havicus Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 16 12224 122 Series Fixed Height Stool, without back; 16 5/8" dia x 23 3/8" H for 36" H counter; with tubular steel frame and seat pan with Masonite inset; Frame: Silver Mist GRY 02; Seat Inset: Masonite (Mottled Brown / Tan / Gray); with felt nonmarking floor glides Tag: 6 each for Boys' Dressing 6035 6 each for Girls' Dressing 6037 4 each for Tickets 7014 20 12218 122 Series Fixed Height Stool, same as above, except 17 3/8" H for standard 29" desk height Tag: 20 each for Family Consumer Science 2009 1 Installation Order Total:
VENDOR LIST FMS - 005 Vendor: Virco Date: October 1, 2018 P.O. Box 5000 Highway 65 South Conway, AR 72032 800-448-4726, ext. 1406 Attn: John Havicus Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 41 KPRE183539 Lectern / Presentation Cart; with four worksurfaces; with adjustable second shelf for standing or seated presentations; four 3" diameter stem casters, two lockable; with three outlet electrical assembly; 18" W x 34 1/2" D x 38 1/2" H; Frame: Black metal; Worksurfaces: Grey Laminate Tag: 1 each for (Large) Special Ed 1070 1 each for 7th Math 1077 1 each for 7th Math 1083 1 each for 7th Math 1085 1 each for 7th Science 1096 1 each for 7th English 1099 1 each for 7th English 1100 1 each for 7th English 1101 1 each for Collaboration 1105 1 each for 7th Language 1107 1 each for Special Ed 1106 1 for 7th Social Studies 1122 1 for 7th Social Studies 1123 1 for 7th Social Studies 1124 1 each for AgriScience Classroom 1137 1 each for Instructional Partner 2030 1 each for 8th Math 2031 1 each for 8th Math 2032 1 each for 8th Math 2035 1 each for Career Prep 2015
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 each for Career Prep 2019 1 each for Career Cluster Classroom 2020 1 each for Pathways 2039 1 each for Math Intervention 2044 1 each for Pathways 2045 1 each for 8th Science 2056 1 each for Future Classroom 2059 1 each for Future Classroom 2060 1 each for Journalism 2063 1 each for Collaboration 2065 1 each for Special Education 2066 1 each for Reading Intervention 2067 1 each for 8th Foreign Language 2073 1 each for Special Education 2076 1 each for 8th English 2077 1 each for 8th Social Studies 2078 1 each for 8th English 2079 1 each for 8th Social Studies 2080 1 each for 8th English 2081 1 each for 8th Social Studies 2082 1 each for Chorus Office 6009 1 each for General Music 6032 1 LCTRNE Lectern; with fixed angle top surface with pen / pencil catch; fixed concealed inner shelf at upper and lower heights; four casters; 24" W x 20" D x 46" H; Finish: Windsor Cherry MHG 682 (wood grain) Tag: 1 each for Career Cluster 2021 1 Installation Order Total: Page 2 of 2
VENDOR LIST FMS - 006 Vendor: Virco Date: October 1, 2018 P.O. Box 5000 Highway 65 South Conway, AR 72032 800-448-4726, ext. 1406 Attn: John Havicus Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 154 N218 Student Desk Chairs for "Standard Height" Tables; 20 3/8" W x 20 7/8" D x 32 1/4" H with 18" seat height; with felt non-marking floor glides; Chrome Legs/Frame; Shell: Black, BLK01 Tag: 154 each for Cafeteria 5001 148 CS30 Civitas Cafe Stool Seating for "Bistro / 42 High" Tables; with Sage Chair Shell; 20 3/4" W x 22 7/8" D with 30" H seat; with four legs, with "foot bar," with felt non-marking floor glides; Shell: Black, BLK01 Tag: 148 each for Cafeteria 5001 1.00 Installation Order Total:
VENDOR LIST FMS - 007 Vendor: Wenger Corporation Date: October 1, 2018 555 Park Drive, P.O. Box 448 Owatonna, MN 55060-0448 800-493-6437 Attn: Julie Evers Dealer: Name: Ship to: Florence Middle School Address: 648 North Cherry Street City / State / Zip: Florence, AL 35630 Telephone: Attn: Rick Peppers Attn: 256-710-3080 rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 178 0936121 Student Music Chair; 0930000 Black Powder Coat Paint Finish Frame; Black high impact textured polypropylene seat and back, 1/8" thick; Music Posture design for sitting posture equivalent to standing to free the diaphragm; 17 1/2" seat height; five year warranty; compatible with Wenger "Ganging Clamp Accessory," folding tablet arm, book / music storage rack, tuba rest, and sousaphone holder Tag: 104 each for Band Room 6016 2 each for Practice Room 6018 2 each for Practice Room 6019 30 each for Orchestra 6025 20 each for Instrument / Percussion Rehearsal 6029 20 each for Guitar Classroom 6030 9 127A661 Chair Move and Store Cart with Purch; 16 gauge steel construction with "easy roll" casters; 39" W x 25" D x 66" H when loaded, capacity: 18 Student Music Chairs Tag: 7 each for Band Storage 6020 2 each for Orchestra Storage 6026
QTY. ITEM # DESCRIPTION UNIT EXTENDED 208 039E500 Classic 50 Student (Large) Music Stand; high strength polycarbonate base and desk; wobble free base attachment; Black "molded through color" base and desk; brass spring height adjustment mechanism, 25" to 49" high; five year warranty; compatible with Wenger: electric and LED music stand lights, universal tablet mount, and side mount extension. Tag: 104 each for Band Room 6016 2 each for Practice Room 6018 2 each for Practice Room 6019 30 each for Orchestra 6025 20 each for Instrument / Percussion Rehearsal 6029 20 each for Guitar Classroom 6030 30 each for Stage 6070 10 039C203 Large Music Stand Move and Store Cart; 8" center pivot wheels and 5" heavy duty casters; 27 1/2" W x 68" L x 61" H (loaded); capacity: 20 Large Classic 50 Music Stands Tag: 8 each for Band Storage 6017 2 each for Orchestra Storage 6027 2 236C011 Flex Conductor's Stand, HPL; 2 with pair of 236C006 high strength polycarbonate desk base with cast iron base on wheels; Desk: 27" W x 20" D with 2" lip and height adjustable in 2" increments and flat to vertical tilt; 36" to 52 1/2" overall height; five year warranty; Color: Black; with pair of optional storage baskets; compatible with other optional components for customization of "Flex Conductor's System" Tag: 1 each for Band Room 6016 1 each for Orchestra 6025 Page 2 of 3
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 173E050.101 Music Sorting Rack, PB; 50" W x 25 1/4" D x 35" H; open front with two fixed shelves; top counter with 46 sorting slots identified by instrument, 1" W x 9" L slots; with swivel casters; Laminate: Oyster (Light Gray) with matching edgeband Tag: 1 each for Music Library 6015 9 164D005.109 Bookcase (for sheet music storage); 30" W x 12" D x 72" H; open front, without doors; with five adjustable shelves; with finished back panel; Laminate: Oyster (Light Gray) with matching edgeband; ten year warranty Tag: 10 each for Music Library 6015 Lot Installation Product assembly, installation (and security to wall, where applicable), etc. of all items by manufacturer Lot Packing / Freight / Handling By manufacturer Order Total: Page 3 of 3
VENDOR LIST FMS - 008 Vendor: Wenger Corporation Date: October 1, 2018 555 Park Drive, P.O. Box 448 Owatonna, MN 55060-0448 800-493-6437 Attn: Julie Evers Dealer: Name: Ship to: Florence Middle School Address: 648 North Cherry Street City / State / Zip: Florence, AL 35630 Telephone: Attn: Rick Peppers Attn: 256-710-3080 rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 6 098G054 Signature Series Choral Risers, four steps high; mobile unit with one person transport and set up capability, with swivel action wheels; straight or semi-circular configuration; 78" W x 31" D x 76" H with 42" H back rail; Frame / Rail Finish: Black (Steel); Steps: Gray carpet 1 Installation 1 Freight Tag: 6 each for Chorus Room 6009 Order Total:
VENDOR LIST FMS - 009 Vendor: Wenger Corporation Date: October 1, 2018 555 Park Drive, P.O. Box 448 Owatonna, MN 55060-0448 800-493-6437 Attn: Julie Evers Dealer: Name: Ship to: Florence Middle School Address: 648 North Cherry Street City / State / Zip: Florence, AL 35630 Telephone: Attn: Rick Peppers Attn: 256-710-3080 rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 2 028B002 Rack 'n Roll Costume Rack; 72" W x 24" D x + 72" H to fit through 32" door; welded steel construction; with 1 3/4" dia hanger bar, top and bottom shelves; heavy duty casters; Color: Black Tag: 2 each for Chorus Costume Storage 6006 1 028B001 Rack 'n Roll Costume Rack; same as above except 48" W x 24" D 1 Installation 1 Freight Tag: 1 each for Chorus Costume Storage 6006 Order Total:
VENDOR LIST FMS - 010 Vendor: The HON Company Date: October 1, 2018 200 Oak Street Muscatine, IA 53761 800-833-3964 Dealer: Name: Ship to: Florence Middle School Address: 648 North Cherry Street City / State / Zip: Florence, AL 35630 Telephone: Attn: Rick Peppers Attn: 256-710-3080 rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 56 H38180.P 38000 Series Steel Teacher Desks w/ 3/4 Pedestals; with 3/4 modesty panel; two Box / File pedestals with keyed alike locks; 60" W x 30" D x 29 1/2" H; with continuous Radius Drawer Pulls; with two each top and side grommets; Laminate Top: Shadow Zephyr K1 (Light Gray) with matching Edgeband; Paint Color (steel body): Black "P"; with felt floor protector pads on legs 56 with HCDI with Black Polymer Center Drawer, 23" W x 16" D x 2" H clear opening 56 H312P.P 310 Series Vertical File; two drawer, letter size, for hanging or compressor style files; aluminum drawer handles; Paint Color (steel body): Black "P;" with felt floor protector pads on glides 56 HF24C Lock Kit with keyed alike removable lock core for vertical files, Finish: Chrome Tag: 1 each for (Large) Special Ed 1070 1 each for 7th Math 1077 1 each for 7th Math 1083 1 each for 7th Math 1085 1 each for 7th Science 1088 1 each for 7th Science 1091 1 each for 7th Science 1095 1 each for 7th Science 1096
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 each for 7th English 1099 1 each for 7th English 1100 1 each for 7th English 1101 1 each for Collaboration 1105 1 each for Special Ed 1106 1 each for 7th Language 1107 1 each for 7th Social Studies 1122 1 each for 7th Social Studies 1123 1 each for 7th Social Studies 1124 1 each for AgriScience Classroom 1137 1 each for Instructional Partner 2030 1 each for 8th Math 2031 1 each for 8th Math 2032 1 each for 8th Math 2035 1 each for Career Prep 2015 1 each for Career Prep 2019 1 each for Career Cluster Classroom 2020 1 each for Pathways 2039 1 each for Math Intervention 2044 1 each for Pathways 2045 1 each for 8th Science 2050 1 each for 8th Science 2051 1 each for 8th Science 2056 1 each for 8th Science 2057 1 each for Future Classroom 2059 1 each for Future Classroom 2060 1 each for Journalism 2063 1 each for Collaboration 2065 1 each for Special Education 2066 1 each for Reading Intervention 2067 1 each for 8th Foreign Language 2075 1 each for Special Education 2076 1 each for 8th English 2077 1 each for 8th Social Studies 2078 1 each for 8th English 2079 1 each for 8th Social Studies 2080 1 each for 8th English 2081 1 each for 8th Social Studies 2082 1 each for Pathways 2039 1 each for Math Intervention 2044 1 each for Pathways 2045 1 each for 8th Science 2050 1 each for 8th Science 2051 1 each for 8th Science 2057 1 each for Instr / Perc Rehearsal 6029 1 each for Guitar Classroom 6030 Page 2 of 3
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 each for Orchestra 6025 1 each for General Music 6032 1 each for Theatre Classroom 6045 1 each for Dance Classroom 6047 Order Total: Page 3 of 3
VENDOR LIST FMS - 011 Vendor: The HON Company Date: October 1, 2018 200 Oak Street Muscatine, IA 53761 800-833-3964 Dealer: Name: Ship to: Florence Middle School Address: 648 North Cherry Street City / State / Zip: Florence, AL 35630 Telephone: Attn: Rick Peppers Attn: 256-710-3080 rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED 13 H38180.K1.P 38000 Series Steel Office Desks w/ 3/4 Pedestals; with 3/4 modesty panel; two Box / File pedestals with keyed alike locks; 72" W x 36" D x 29 1/2" H; with Continuous Radius Drawer Pulls; with two each top and side grommets; Laminate Top with matching Edgeband: Shadow Zephyr (Light Gray) K1; Paint Color (Steel Body): Black; with felt floor protector pads 13 HF23S Lock Kit, Satin Chrome 13 with HCDI with Black Polymer Center Drawer, 23" W x 16" D x 2" H clear opening Tag: 1 each for SRO Office 1020 1 each for AgriScience Office 1136 1 each for Family Consumer Science Office 2007 1 each for CP Office 2016 1 each for CP Office 2017 1 each for Career Cluster Classroom Office 2022 1 each for PE Office 4015 1 each for Coaches' Office 4017 1 each for Coaches' Office 4022 1 each for PE Office 4024 1 each for Kitchen Office 5023 1 each for Chorus Office 6007
QTY. ITEM # DESCRIPTION UNIT EXTENDED 1 each for Band Office 6014 2 H38925 38000 Series Desk Shell; with 3/4 modesty panel; 72" W x 24" D x 29 1/2" H; Finishes: same as above; with felt floor protector pads Tag: 2 each for Nurse's Office 1018 1 H38923.K1.P 38000 Series Steel Desk Shell; with 3/4 modesty panel; 66" W x 24" D x 29 1/2" H; Finishes: same as above; with felt floor protector pads Tag: 1 each for Tech Support 1064 1 H38921.K1.P 38000 Series Desk Shell; same as above except 48" W x 24" D; with felt floor protector pads Tag: 1 each for Tech Support 1064 1 H386566N.Q 38000 Series Steel Overshelf; open back; with doors; one fixed shelf; 66" W x 13 1/2" D x 34 3/4" H; Paint Color (Steel Body): Light Gray Q 1 H386615.X.Q with a pair of 33" W x 15" H Flipper Doors, with keyed alike lock Tag: 1 each for Tech Support 1064 1 H386548N.Q 38000 Series Steel Overshelf; same as above, except 48" W 1 H384815.X.Q with one 48" W Flipper Door, with lock Tag: 1 each for Tech Support 1064 3 HF23S Lock Kit, Satin Chrome, for flipper doors 1 HT66ND. Fabric.Q Tackboard, for 66" W overshelf; 66" W x 19 3/8" H; Fabric: Grade A, Element, Wisp GN75 (Very Light Gray) Page 2 of 4
QTY. ITEM # DESCRIPTION UNIT EXTENDED Tag: 1 each for Tech Support 1064 1 HT48ND. Fabric.Q Tackboard, for 48" W overshelf; 48" W x 19 3/8" H; Fabric: Grade A, Element, Wisp GN75 (Very Light Gray) Tag: 1 each for Tech Support 1064 3 HLED31AS LED Task Light; 31" W; attaches magnetically on overshelf; 50,000 hour bulb, with dimmer (standard), with single power supply Tag: 3 each for Tech Support 1064 1 H38210.K1.P 38000 Series Bridge for desk/credenza; 48" W x 24" D; with full height back panel; with two grommets; Laminate Top with matching Edgeband: Shadow Zephyr K1 (Light Gray); Paint Color (Steel Body): Black; with felt floor protector pads Tag: 1 each for Tech Support 1064 3 HCDI 38000 Series Polymer Center Drawer; Color: Black; 23" W x 16" D x 2" H clear opening Tag: 1 each for Nurse's Office 1018 2 each for Tech Support 1064 4 H19723.R.X. P Flagship Series, Box / Box / File Drawer Pedestal; Freestanding; with Full Radius Drawer Pulls; with keyed alike lock; 15" W x 23" D x 28" H; Paint Color (Steel Body): Black; with felt floor protector pads Tag: 1 each for Nurse's Office 1018 3 each for Tech Support 1064 4 HF23S Lock Kit, Satin Chrome, for above files Page 3 of 4
QTY. ITEM # DESCRIPTION UNIT EXTENDED 2 H19823.R.X. P Flagship Series, File / File Drawer Pedestal; same as above Tag: 1 each for Nurse's Office 1018 1 each for Tech Support 1064 2 HF23S Lock Kit, Satin Chrome, for above files 1 H38931.K1.P 38000 Series Desk Shell "Diabetes" Table; 48" W x 30" D x 29 1/2" H, with 3/4 height modesty panel; compatible with HON pedestals; with two each top and side grommets; Laminate Top with matching Edgeband: Shadow Zephyr K1 (Light Gray); Paint Color: Black "P;" with felt floor protector pads Tag: 1 each for Nurse 1018 1 H80193. MOCH Occasional Table Series End Table; 24" W x 20" D x 20" H; four leg style; Plastic Laminate: Mocha; with felt floor protector pads Tag: 1 each for Nurse 1018 Order Total: Page 4 of 4
VENDOR LIST FMS - 012 Vendor: The HON Company Date: October 1, 2018 200 Oak Street Muscatine, IA 53761 800-833-3964 Ship to: Florence Middle School Dealer: Name: 648 North Cherry Street Address: Florence, AL 35630 City / State / Zip: Attn: Rick Peppers Telephone: 256-710-3080 Attn: rpeppers@florencek12.org Tag: Florence Middle School QTY. ITEM # DESCRIPTION UNIT EXTENDED The following items are all in the "Flagship Series" and are metal freestanding units which are to fit under desk, credenza, or file tops by another vendor; all items are to have a full (continuous, integral) radius pull; all items are metal; Color: Black "P" 10 H9180R. X.P Flagship Series Lateral File, two drawer; 36" W x 18" D x 28" H; with lock, keyed alike with other HON items in the same space; use with Indiana Desk, Gesso Series, Modular Top at special 18 1/2" D; secure with commercial grade thin double stick tape or other approved method 10 HF23S Lock Kit, Finish: Satin Chrome Tag: 2 each for Bookkeeping 1006 4 each for Assist Principal 2029* 1 each for Riverbend Counselor 1054 1 each for Counselor 1055 1 each for Counselor 1056 1 each for Agency Counselor 1058 * Vendor to field verify clearance for all units to fit; coordinate with Architect if an adjustment in the overall size of the components is required
QTY. ITEM # DESCRIPTION UNIT EXTENDED 6 H9190R. X.P Flagship Series Lateral File, two drawer; 42" W x 18" D x 28" H; with lock, keyed alike with other HON items in the same space; use with Indiana Desk, Gesso Series, Modular Top at Standard 24" D; set top with + 6" overhang at back of cabinets, against wall; secure to files with removeable commercial grade thin double stick tape or other Architect approved method which will not deface the files if the tops are ever removed; secure to wall with wall cleat or angle brackets; to be used in a grouping with two HON bookcases with doors 6 HF23S Lock Kit, Finish: Satin Chrome Tag: 3 each for Collaboration 1005* 3 each for Collaboration 2065* * Vendor to field verify clearance for all units to fit; coordinate with Architect if an adjustment in the overall size of the components/grouping is required 4 HFC1830DD R.P Flagship Series Bookcase with Doors; nonlocking; 30" W x 18" D x 28" H; with one adjustable shelf; unit will accommodate one row of binders only; reinforced case construction, with four leveling glides; to be used in a grouping with three HON lateral files Tag: 2 each for Collaboration 1105* 2 each for Collaboration 2065* * Vendor to field verify clearance for all units to fit; coordinate with Architect if an adjustment in the overall size of the components/grouping is required 2 H18723R.X. P Flagship Series Mobile File Pedestal, Box/Box/File; 15" W x 24" D x 28" H; with lock, keyed alike with other HON items in the same space; to be installed under Indiana Desk, Gesso Series, desk shell or credenza shell 2 HF23S Lock Kit, Finish: Satin Chrome Page 2 of 4