Dräger PARAT 7500 Filtering Escape Hoods The combined fire and industrial escape hood Dräger PARAT 7500 was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK CO P3 filter ensure protection from toxic industrial and fire-related gases, vapours and particles for at least 15 minutes.
02 Dräger PARAT 7500 Benefits Ready for escape in only 3 steps Exceptionally innovative and intuitive: When opening the packaging, the filter plug is automatically released from the filter. The filter is then deployed into operational position and the hood can be immediately donned. Thanks to the self-adjusting internal head harness, no additional adjustment is required. All you have to do is open the packaging, remove and don the hood and leave the danger zone. Reliable protection The high-performance combination filter reliably protects against a wide range of fire and toxic industrial gases, vapours and particles. The ABEK CO P3 Filter is approved according to the EN standard 403:2004 for fire escape hoods, the DIN standard 58647-7 for filtering escape devices and is tested in accordance with the EN standard 14387:2004 for gas filter(s) and combined filter(s). In addition, the filter is tightly sealed with two filter plugs keeping it safe over its long lifetime. 16 years of service life Replacing the filter after eight years will extend the service life of the Dräger PARAT Escape Hood to 16 years in total. For this, Dräger offers filter replacement service or expert training for your employees. Robust and ergonomic Both, ergonomics and wearing comfort were considered when designing the packaging of the Dräger PARAT Escape Hoods. The escape hood can be carried with a belt, shoulder strap, grip clip or belt clip. The PARAT Hard Case can also be mounted on the wall using a wallholder. Addtionally, the robust packaging of the Dräger PARAT Escape Hoods protects the device from damage. Different packaging types You can select between two packaging types: The Hard Case provides splash water protection (IP54) the Soft Pack provides dust protection (IP5). Both packaging types have a viewing window to check the filter expiration date and the condition of the device. Particularly convenient: The security seal on the packaing shows if the unit has been opened
Dräger PARAT 7500 03 Accessories Wallholder PIN for PARAT Hard Case D-85100-2013 Ideal for placing stationary units in a central location. For example in public buildings, where they may be needed in an emergency situation. Or optionally placed in specific locations where they may be required as a safety measure. The Wallholder PIN can be mounted to any Hard Case using the accessory attachment points. (Order number: R 59 451) Wallholder HOOK for PARAT Hard Case D-21254-2015 Ideal for placing stationary units in a central location. For example in public buildings, where they may be needed in an emergency situation. Or optionally placed in specific locations where they may be required as a safety measure. The unique advantage of the Wallholder HOOK is that when mounted to the Hard Case via a hook system a shoulder harness can be attached to the Hard Case. (Order number: R 59 452) Waist Belt, textile Ideal for carrying the unit safely secured to the wearer on a daily basis. The textile waist belt is robust and comfortable to wear. The waist belt can be used with both Soft Pack and Hard Case versions. (Order number: 67 33 934) ST-14720-2008 ST-14719-2008 Waist Belt, plastic Ideal for carrying the unit safely secured to the wearer on a daily basis. The flexible plastic-coated waist belt is easy to clean, especially after work in rough environments. The waist belt can be used with both Soft Pack and Hard Case versions. (Order number: R 53 026)
04 Dräger PARAT 7500 Accessories Shoulder Strap D-92809-2013 The shoulder strap is perfect for short-term and recurring operations, where the device must be quickly taken with the user. The strap can be mounted to accessory attachment points on the Hard Case or the attached loops on the Soft Pack. (Order number: R 59 461) Belt Clip D-92815-2013 The belt clip can be used with any standard belt. Ideal for short term applications like inspection or maintenance where the unit is often attached to and removed from the belt. Can be mounted on the Hard Case using the accessory attachment points. For attachment on the Soft Pack the adapter plate is needed. (Order number: R 59 456) Grip Clip D-85103-2013 The grip clip is a good carrying solution for short term applications when a securely fastened clip is needed. It is ideal to fasten on work clothes or pockets. It can be mounted on the Hard Case using the accessory attachment points. For attachment on the Soft Pack the adapter plate is needed. (Order number: R 59 455) D-Ring for PARAT Hard Case D-92814-2013 The d-ring is ideal for carrying the unit in combination with a carabiner hook. A d-ring is already a standard part of the Soft Pack. This is an optional accessory for the Hard Case and can be mounted using the accessory attachment points. (Order number: R 59 457)
Dräger PARAT 7500 05 Accessories Adapter Plate for PARAT Soft Pack The adapter plate is needed to attach the belt or grip clip for use with the Soft Pack. (Order number: R 58 742) D-85043-2013 D-85108-2013 Dräger PARAT Training Hood The Dräger PARAT Training Hood is an ideal way to train employees on the donning and use of escape hoods. Training versions come standard with a filter dummy for hygenic use. They are available in a Single Pack (order number: R 59 410), Soft Pack (order number: R 59 420) and Hard Case (order number: R 59 430). Related Products Dräger PARAT 4700 D-85039-2013 The Dräger PARAT 4700 industrial escape hood was developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested ABEK P3 filter ensure protection from toxic industrial gases, vapours and particles for at least 15 minutes.
06 Dräger PARAT 7500 Related Products Dräger PARAT 5500 D-85029-2013 The Dräger PARAT 5500 fire escape hood was developed in cooperation with users always with the focus on offering the fastest possible escape. Optimized operation and wearing comfort, a robust housing and a tested CO P2 filter ensure protection from toxic firerelated gases, vapours and particles for at least 15 minutes while escaping.
Dräger PARAT 7500 07 Technical Data Filter performance Period of Use Total service life Weight Dimensions (length x width x height) Approvals ABEK CO P3 combination filter against toxic gases, vapours, particles and fire-related gases At least 15 minutes 16 years (provided the filter is exchanged after eight years) PARAT 7520: 770 g / 27.16 oz PARAT 7530: 830 g / 29.28 oz PARAT Training Hood Soft Pack: 510 g / 17.99 oz PARAT Training Hood Hard Case: 570 g / 20.11 oz PARAT 7520: 235 x 160 x 115 mm / 9.25 x 6.3 x 4.53 in PARAT 7530: 249 x 156 x 115 mm / 9.8 x 6,14 x 4.53 in PARAT Training Hood Soft Pack: 215 x 155 x 105 mm / 8.46 x 6.1 x 4.13 in PARAT Training Hood Hard Case: 241 x 143 x 107 mm / 9.49 x 5.63 x 4.21 in according to EN 403:2004 and DIN 58647-7 (filter additionally tested in accordance with EN 14387:2004) Gas filter capacity according to DIN 58647-7 * Type Test gas Concentration in ppm Minimum exposure time in min A Cyclohexane (C6H12) 2,500 15 B Chlorine (Cl2) 2,500 15 B Hydrogen sulphide (H2S) 2,500 15 B Hydrogen cyanide (HCN) 2,500 15 E Sulphur dioxide (SO2) 2,500 15 K Ammonia (NH3) 2,500 15 B Hydrogen sulphide (H2S) 10,000 1 5 * Test conditions: 30 L/min, 70 % relative humidity, 20 C / 68 F 1 The penetration safety of the gas filter is additionally tested with 10,000 ppm of hydrogen sulphide. Gas filter capacity according to EN 403:2004 * Test gas Concentration in ppm Minimum exposure time in min Carbon monoxide (CO) 2,500 1 15 Propenal (Acrolein) 100 15 Hydrogen chloride (HCI) 1,000 15 Hydrogen cyanide (HCN) 400 15 * Test conditions: 30 L/min, 70% rel. humidity, 20 C / 68 F 1 Additional tests are carried out at 5,000, 7,500 and 10,000 ppm Gas filter capacity according to EN 14387:2004+A1:2008* Type Test gas Concentration in ppm Minimum exposure time in min A Cyclohexane (C6H12) 1.000 70 B Chlorine (Cl2) 1.000 20 Hydrogen sulphide (H2S) 1.000 40 Hydrogen cyanide (HCN) 1.000 25 E Sulphur dioxide (SO2) 1.000 20 K Ammonia (NH3) 1.000 50 *Test conditions: 30 L/min, 70 % relative humidity, 20 C / 68 F
08 Dräger PARAT 7500 Ordering Information Dräger PARAT Dräger PARAT 7520, Soft Pack R 59 427 Dräger PARAT 7530, Hard Case R 59 437 Dräger PARAT 4720, Soft Pack R 59 421 Dräger PARAT 4730, Hard Case R 59 431 Dräger PARAT 5510, Single Pack R 59 415 Dräger PARAT 5520, Soft Pack R 59 425 Dräger PARAT 5530, Hard Case R 59 435 Dräger PARAT 5550, Fire Pouch R 59 445 Dräger PARAT Training Hood, Soft Pack R 59 420 Dräger PARAT Training Hood, Hard Case R 59 430 Accessories Replacement Filter Set: Dräger PARAT 7500 R 59 477 (includes ABEK CO P3 filter and security seal) Wallholder PIN PARAT Hard Case R 59 451 Wallholder HOOK for PARAT Hard Case R 59 452 Waist Belt, textile 67 33 934 Waist Belt, plastic R 53 026 Shoulder Strap R 59 461 Belt Clip R 59 456 Grip Clip R 59 455 Adapter Plate for PARAT Soft Pack R 58 742 D-Ring for PARAT Hard Case R 59 457 90 71 977 16-03-2 Communications & Sales Marketing PP LE Chlorine-free environmentally compatible Subject to modifications 2016 Drägerwerk AG & Co. KGaA CORPORATE HEADQUARTERS Drägerwerk AG & Co. KGaA Moislinger Allee 53 55 23558 Lübeck, Germany www.draeger.com REGION EUROPE CENTRAL AND EUROPE NORTH Dräger Safety AG & Co. KGaA Revalstraße 1 23560 Lübeck, Germany Tel +49 451 882 0 Fax +49 451 882 2080 info@draeger.com REGION EUROPE SOUTH Dräger Safety France SAS 25, rue Georges Besse 92182 Antony Cedex Tel +33 1 46 11 56 00 Fax +33 1 40 96 97 20 europe.south@draeger.com REGION MIDDLE EAST, AFRICA Dräger Safety AG & Co. KGaA Branch Office P.O. Box 505108 Dubai, United Arab Emirates Tel +971 4 4294 600 Fax +971 4 4294 699 contactuae@draeger.com REGION ASIA PACIFIC Draeger Safety Asia Pte Ltd 25 International Business Park #04-20/21 German Centre Singapore 609916 Tel +65 6308 9400 Fax +65 6308 9401 asia.pacific@draeger.com REGION CENTRAL AND SOUTH AMERICA Dräger Panama S. de R.L. Complejo Business Park, V tower, 10th floor Panama City Tel +507 377 9100 Fax +507 377 9130 contactcsa@draeger.com REGION NORTH AMERICA Draeger Safety, Inc. 101 Technology Drive Pittsburgh, PA 15275 Tel +1 412 787 8383 Fax +1 412 787 2207 info.dsi@draeger.com Locate your Regional Sales Representative at: www.draeger.com/contact