HEALTH & SAFETY HANDBOOK. Venues/HSE/08/16

Similar documents
Contractor / Exhibitor Handbook

You must NOT touch any equipment unless you are authorised to work on or with that equipment and you have followed correct safety procedures.

UCAS shell scheme event organiser risk assessment

CONSTRUCTION HEALTH AND SAFETY MANAGEMENT SYSTEM BASELINE HIRA

Safety and Infrastructure

Monash University Academy of Performing Arts Safety Induction

Visitor information pack

IMMANUEL CHURCH, CHICHESTER HEALTH AND SAFETY POLICY

New Employee Safety Orientation. Session Objectives. Session Objectives (cont.)

2.0 Management Systems and Documentation

Contractor/Visitor Safety Orientation UNBC

Scissor Lift Safety Policy Training Course (GS600) Material

Deans, Directors, Heads of Schools and Departments and Research Institute Directors and Managers

Contractor handbook. Purpose

EXHIBITION Guide. Roles and Responsibilities OS11. A handbook for exhibitors and contractors

CONTRACTOR SAFETY INDUCTION HANDBOOK

Potential risk of injury to staff

Personal commitments you can live and work by:

New Hire Safety Orientation. Welcome to Flexicrew, our number one priority is you and your safety.

Site Induction Document & Site Rules

higher education exhibition 2018 Wednesday 13 June 09:30 14:30

Site Induction Document & Site Rules

Visitor information pack

Safe Work Method Statement

Visitor information pack

TRADE AREA: ELECTRICAL INDUSTRY

EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE

Method Statement Author

SAFE WORK METHOD STATEMENT Part B

Waste Industry Safety & Health

COREWEST DIAMOND DRILLING LTD. * ENVIROMENT, HEALTH AND SAFETY PROGRAM* APPENDIX A GENERAL WORKSAFE PRACTICES

HS26 Working at Height Policy and Procedure

How to plan an event. Step 1: First things first. Step 2: How to make it all happen?

1.1 OHS Policy and Responsibilities

Safe Work Method Statement LRB TREE SERVICES 6 Behland St, Kearneys Spring QLD, 4350 ABN

Visitor information pack

Visitor information pack

Unit 302 Health & Safety in ICT. By Josh Gibson

STReSS Laboratory Safety Training Memorandum

WHS CONTRACTOR INFORMATION PACKAGE

Contractors' Code of Safe Practice

Occupational Health Safety and Welfare. Our Policy

Safety Checklist for Events Held at Hillbrook

Site Induction Document & Site Rules

Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS)

WORK HEALTH AND SAFETY

Dorset higher education exhibition Exhibitor manual. Bournemouth University Fern Barrow Poole BH12 5BB. Wednesday 28 March :30 15:00

Work At Heights Toolkit. for Supervisors

Cornwall higher education exhibition Exhibitor manual. Penryn Campus, Treliever Road Penryn, Cornwall, TR10 9FE. Tuesday 1st May 09:30 15:30

B S Glass Ltd Safety procedures- outsourced Workplaces


Guidance for Exhibitions

Working safely in an engineering environment

A MESSAGE FROM THE MD

Pre-control risk estimate. Likelihood Risk

Safety Guidelines. National health and safety guidelines as well as worker safety act shall be considered

Workplace Safety Inspection Sheet

SCOUTS AUSTRALIA NSW

Appendix 4C - Sample SWMS Trenching

Site Induction Document & Site Rules

Safety is a priority at Vault Pipelines.

Don t let a fall shatter your life!

WORK METHOD STATEMENT CARPET LAYING

METHOD STATEMENT. Temporary Installation of Mobile Disco. Version 1.0 Dated 19th December Published by Andy Przybyla. Document Ref: APDJ004

Bogo Operations Pollution Incident Response Management Plan

ISS Safety Rules. Make safety second nature

New Employee Safety Orientation. Presented by: Risk Management Services 2419 Cockrell, Dallas TX (972)

MANDATORY DEADLINE December 27, 2018

Operation of Embrey Excavator Shears Safe Work Procedure PTES_HSE_SWP_039. Name Date Signature. Author Jarred Hearle 27/11/2015

UCAS event organiser risk assessment

Promotion of Safety. Chapter 10 Intro to HST

Instructions for the Use of the Excel Spreadsheet. There are Three tabs at the bottom of this worksheet. Instructions tab is the one you are reading

Harbour Town Gold Coast Site Induction

1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.

CONTRACTOR SAFETY RULES

OFFICE SAFETY ESSENTIALS

SOPAN O & M COMPANY PVT. LTD.

WORK METHOD STATEMENT STRUCTURAL STEEL

Contractor Hazard Identification and Control Guide

EHS Workplace Inspection Checklist (Ref. SOP QMS-080; EHS-010)

Self Inspection Checklist

Minimum Safety Requirements for Contractors Working on Railway Property

TENDERER OCCUPATIONAL HEALTH AND SAFETY (OHS) MANAGEMENT SYSTEM QUESTIONNAIRE

Safe Work Method Statement

SWMS No 012 Samark North Qld Pty Ltd ABN : Electrical Contractors License C37121 Page 2 of 6

DEPARTMENT OF THEATRE AND DANCE CALIFORNIA STATE UNIVERSITY, FULLERTON

Section J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS

(Health, Safety, and Welfare)

STABLESAFE TRAINERS AUDIT TOOL

Risk assessment part 1 of 3

Kettleshulme Parish Council Risk Assessment 2015 Kettleshulme Memorial Hall

WORKSHOP CARPENTRY/FENCING

New Employee Safety Orientation

Health & Safety Contractor rules

Health, Safety and Welfare Policy

California Fast Food Safety Association INJURY AND ILLNESS PREVENTION PROGRAM

7 Hazard assessment 8 Worker participation 9 Hazard elimination and control

SAFE WORK METHOD STATEMENT WORKING IN CONFINED SPACE HSE NET NAT SWMS APAND00030

Visitor information pack

Working at Height - MEWPS & Ladders. Your company details Address Tel: Fax: Mobile:

Transcription:

HEALTH & SAFETY HANDBOOK Venues/HSE/08/16

CONTENTS Emergency Numbers 1 HSE Policy Statement 2 Introduction 3 Site Access 4 Permit to Work 5 Personal Protection Equipment 6 HSE Communication 7 Workplace Hazards 8 Notice and Signages 9 In Case of Fire 10 Assembly Points 11 Smoking Policy 12 Reporting Accidents 13 In Case of Injury 14 Working at Heights 15 Scaffolding 16 Ladders 17 Electricity Onsite 18 Hand and Power Tools 19 Manual Work 20 Chemical Work 21 Cranes 22 Forklifts 23 Boom and Scissor Lifts 24 Transportation 25 Housekeeping 26 The Environment 27 Fire Safety 28 Safety First 29 EMERGENCY NUMBERS In an emergency dial the following DWTC numbers: SECURITY 04 306 4600 FIRE 04 306 4444 MEDICAL 04 306 4040 Telephones can be found in key locations throughout the venue including: - Information points - Organisers offices (that are in use) - F&B outlets Alternatively, an alarm of an emergency can be raised through any security guard. 1

2 3 HSE POLICY STATEMENT INTRODUCTION The Venues Health and Safety team at Dubai World Trade Centre (DWTC) recognizes that Health and Safety is imperative to the company, it s staff, employees, customers, visitors and to the community. DWTC is therefore committed to provide a safe and healthy working environment for all employees as well as to the event organizers, exhibitors, contractors and requires that safety should not be compromised at any time. We expect contractors and tenants providing services to DWTC to have the same high standards of Health and Safety as we do. Health and Safety is a shared responsibility. In doing so, DWTC shall provide, so far as possible, a world class facility free of Health and Safety hazards with full compliance to occupational health, safety and environmental laws mandated by Federal law and Local legislation as well as International Health and Safety Standards. Furthermore, DWTC shall ensure and be committed to prevention of injuries to its personnel and customers, as well as to prevent damage to property and equipment. In return each person is ultimately responsible for personal safety by adhering to DWTC Safety Management System, Health and Safety Policies and Procedures, exercise caution in the performance of duties, observe safe working practice and follow safety rules. The management encourages everybody to carry out positive and strong Health and Safety cultures beyond the workplace to all of their undertakings. It also encourages trainings and developments of its staff to be more competent in their respective job. The aim of this book is to provide guidance on Health, Safety and Environment (HSE) at Dubai World Trade Centre (DWTC) to ensure that everyone remains safe. HOW WILL DWTC ENSURE SAFETY? By making everyone aware of the risk in the work area. By giving information regarding DWTC safety rules and regulations. By encouraging everybody to contribute in making a Healthy and Safe working Environment. Kindly read all of the HSE rules listed in this safety book. These rules stipulate the minimum requirements for safe completion of any project. HSE TARGET AND GOALS Dubai World Trade Centre firmly believes that no part of its business objectives can be carried out effectively and successfully if not performed safely Our Target Zero incidents/accidents Our Goals No incidents No harm to people No damage to people No damage to environment

4 5 SITE ACCESS All DWTC contractors are required to attend the Health, Safety and Environment Induction/ Toolbox talk prior to commencing work. Collect your contractor badge in exchange of your Emirates ID at the contractor badge collection point. Always carry your contractor badge. Show your badge to security when entering. Use the entrance and exit gates only. Report lost contractor badge immediately to safety office. PERMIT TO WORK Prior to commencing work that can be potentially hazardous, a permit-to-work must be submitted. Upon approval from the supervisor and HSE officer, work can be started. A HOT WORK PERMIT IS REQUIRED FOR Gas cutting Welding Grinding Other hot work related procedures Read and understand your permit, and be sure to display your permit to work in the work area. Do not use another contractor s badge.

6 7 PERSONAL PROTECTION MANDATORY PERSONAL PROTECTION EQUIPMENT (PPE) The following equipment is manadatory and must be worn at all times: HSE COMMUNICATION Keep in touch with Health and Safety regularly: Steel cap boots High-visibility vest Coveralls Helmet JOB-SPECIFIC PPE The following equipment is specific to certain jobs: ATTEND TALKS READ NOTICES TRAINING Attend HSE Induction Tool Box Talks by appointment Read The Health, Safety and Environment notice board Attend Health, Safety and Environmental Training Eye protection Gloves Safety harness Ear protection Dust mask

8 9 WORKPLACE HAZARDS NOTICES AND SIGNAGES Watch out for these common hazards in the workplace: The following is the color coding used for signage: Slips, trips and falls Working at heights Falling objects Electrical hazards Misuse of hand tools BLUE MANDATORY YELLOW CAUTION RED PROHIBITED Moving equipment Lifting Hazardous materials Cutting and welding Fire

10 11 IN CASE OF FIRE Notify all personnel by activating fire alarm. ASSEMBLY POINTS In case of emergency, leave by the nearest exit and make your way to the nearest assembly point. When you hear the alarm sound, stop all work immediately. Remain calm, do not panic or run. Za abeel Entrance FIRE ASSEMBLY POINT Evacuate the area using fire exits or escape routes. DO NOT USE LIFT. Za abeel Concourse 2 Convention Tower Convention Gate Novotel World Trade Centre Car Park C Assemble at the designated ASSEMBLY POINT and report to your supervisor. Call Fire Services or the Ambulance in case of casualties. Za abeel Hall 4 Za abeel Hall 5 Za abeel Hall 6 Za abeel Plaza Hall 8 Sheikh Maktoum Hall Do not re-enter the building until it is declared safe. Za abeel Entrance Za abeel Hall 1 Za abeel Hall 2 Za abeel Hall 3 Hall 7 Hall 6 Concourse 2 Sheikh Rashid Hall Multi-Storey Paid Parking Za abeel Concourse 1 Hall 5 Follow the exit signs Proceed to assembly point Jumeirah Living Residences Sheikh Rashid Tower Paid Parking Arena Plaza FIRE ASSEMBLY POINT Hall 1 Hall 2 Hall 3 Hall 4 Concourse 1 Trade Centre Arena Sheikh Saeed Halls 1, 2 & 3 Al Multaqua Ballroom ibis World Trade Centre Exhibition Gate Exhibition Plaza The Apartments FIRE ASSEMBLY POINT The Plaza FIRE ASSEMBLY POINT

12 13 SMOKING POLICY DWTC has a strict smoking policy: REPORTING ACCIDENTS All accidents and incidents are reportable and it must be reported by the Foreman/Supervisor in charge immediately to Site Manager or HSE Officer. You can call 04 308 6806. Strictly NO SMOKING inside DWTC premises. Smoking is allowed only at designated areas. WHAT TO REPORT: Unsafe acts Unsafe conditions Near miss Injuries and accidents BY REPORTING, YOU WILL ENABLE MANAGEMENT TO: Investigate Find out the immediate cause and the root cause Recommendations to avoid reccurrence

14 15 IN CASE OF INJURY Inform others who may be in danger immediately. Remain calm and notify the supervisor. Supervisor must notify the security or HSE officer. Proceed to Emergency Medical Clinic located next to Al Wasl reception. If the situation is serious, EMS will require an ambulance. WORKING AT HEIGHTS OF HARNESS Use Full Body Harness when working at heights of 2 meters and above on the scaffold tower. Check the harness and ensure that all parts are free from defects before using. Wear the safety harnesses properly. All accidents must be informed and reported. Do not give first aid if you are not trained. Never wear a damaged safety harness

16 17 SCAFFOLDINGS LADDERS UN UN All scaffoldings must be designed, erected, altered and dismantled by competent people under the direct supervision of competent supervisor. Use safety harness whenever advised by the Safety Officer or Supervisor. Keep brakes in place when you are working on a mobile scaffold Barricade the scaffold area when there is a possibility of falling objects Report to HSE whenever you find anything wrong with a scaffolding. Do not perform any alterations to the scaffolding yourself. Never climb scaffoldings. Always use the access ladders. Do not place tools at the edge or hang them on guard rails. Do not lean or stand on guard rails. Do not stand on mobile tower scaffolds when pulled or pushed to another location. Do not use home made scaffolds. Check carefully for any cracks or loose pieces before use. Keep your body centered on the middle of the ladder. Use two hands while climbing up or down. Ensure it is positioned on an even floor and at a 75 angle. Use a correct sized ladder for the activity. Do not use home-made or damaged ladders. Avoid overreaching. Do not put any materials on top of the ladder. Do not put the ladders on top of a scaffold or table. Ladders must always be secured to a structure or securely footed by another person whilst in use.

18 19 ELECTRICITY ONSITE HAND AND POWER TOOLS UN UN Only competent electricians should perform electrical connections. Do not connect the cable wire directly to the socket. All tools must be maintained in a safe working condition. Do not use damaged tools. All damaged tools must be removed from site. Use a 3 pin plug or industrial type electrical socket. Overheated appliances or tools must be removed. Maintain proper cable management. Flammable materials must be removed from the DB s and other electrical circuits. Use required Personal Protective Equipment. Dispose of broken switches or plugs. Do not use damaged wires. Avoid multiple connections. Do not overload circuits. Do not allow electrical cords to be on the floor where they can be walked on. All hand tools and power tools must be visually inspected by the user before use. Only appropriate tools shall be used for the specific job. Only trained and competent persons can use the tools. Wear appropriate job specific Person Protective Equipment. Do not remove the safeguard of the power tools. Home-made and modified tools are not allowed on site Do not use power tools with damaged cables. Don t leave tools lying in walkways or any place where they could be tripped over.

20 21 MANUAL WORK CHEMICAL WORK UN UN Try to avoid manual handling as much as possible Use mechanical aids such as trolleys, rollers, hydraulic jacks, etc. Know and apply proper lifting techniques Use your legs, not your back Jobs must be assessed and planned before they begin. Avoid sudden movements Avoid twisting your body when lifting or carrying a load. When lifting, don t strain your back. Instead, lift correctly to avoid injury. Always read MSDS and follow instructions. Use required PPE. Know all emergency procedures. Make sure all chemicals containers are properly labeled. Always wash up after using chemicals. Store chemicals as recommended by the manufacturer. Never eat or drink while handling chemicals. Never smell or taste a chemical to identify it. Avoid spillage of chemicals. Don t put chemicals in a water bottle. Example: Thinner, glass cleaner, etc.

22 23 CRANES FORKLIFTS UN UN Only competent operators with a valid license can operate the equipment. Valid third party test certificate for the crane is required. Inspect all lifting equipments for damage. Cordon off the lifting area. Do not overload the crane. No riding on the loads. Do not stand under the load being lifted. Beware of overhead dangers. Do not stay or take rest near a parked vehicle at the work site. Operators should have a proper training with a valid driving license. Safety clothing is required. Always perform an operational inspection before use. Fasten seat belt and follow the speed limit. Use suitable pallet/secure the load. Use a helper in narrow spaces. Avoid hazards due to unstable load. No overloading, check weight Do not use fork tips, keep fork low Slow down when turning. No riders on the fork lift. Do not let unauthorized persons operate your forklift and remove the key when unattended. Look left and right and sound horn.

24 25 BOOM & SCISSOR LIFTS TRANSPORTATION UN PERMISSIONS NOT ALLOWED Do not operate any machine, boom lift, scissor lift or any other equipment without a proper license and authorization. Safety harness to be worn when working with boom lift and scissor lift. Avoid overreaching. All vehicles are required to obtain an access permit to enter the marshalling yard. Observe speed limits and traffic signs. Private cars are NOT allowed to park inside the marshalling yard without permission. Parked the vehicle in the designated parking area.

26 27 HOUSEKEEPING THE ENVIRONMENT A place for everything and everything in its place - this is DWTC s housekeeping philosophy. Housekeeping is an integral part of all jobs and is fundamental to safety. Poor housekeeping contributes to accidents caused due to slips, trips, falls, and fire hazards. Always follow proper nailing practices. Always conduct regular housekeeping in your work area. WASTE MANAGEMENT All waste materials must be segregated. All hazardous waste must be stored in a designated hazardous waste area. All waste movement must be recorded. PROTECTION Prevent excessive generation of dust. Avoid chemical spills to water and soil. Control noise at work. NO disposal of chemical into drains/sewer

28 29 FIRE SAFETY ALWAYS MAKE SURE... Make yourself aware of the fire drill procedures. Ensure fire exit and firefighting equipment are free from obstruction. Ensure you know the nearest fire assembly point. Manage rubbish. Don t let paper, rags and other rubbish accumulate. Smoke only in the designated smoking areas. DO NOT... Do not obstruct fire exits/doors, firefighting equipment and fire alarm call points. Do not smoke in a non-designated smoking areas. SAFETY FIRST WORK SAFELY TO REACH YOUR FAMILY. YOUR LOVED ONES ARE WAITING FOR YOU.

www.dwtc.com