DIAMOND CLEAR GAL PAIL Version 1. Print Date 04/25/2011 REVISION DATE: 04/08/2011

Similar documents
: LINSEED OIL TREATMENT -55 GAL DRUM MTO

: EUCOSLIP VOX - 55 GAL DRUM

EVERCLEAR GAL PAIL Version 6.0 Print Date 06/12/2013 REVISION DATE: 05/23/2013

RAMUC THINNER 1 GAL Version 1 Print Date 10/24/2005 REVISION DATE: 06/30/2005

: BARACADE SILANE GAL DRUM

CRYSTAL CLEAR VOC - 5 GL Version 1. Print Date 04/21/2011 REVISION DATE: 03/30/2009

SUPER DIAMOND CLEAR GAL PAIL Version 3.0 Print Date 06/12/2013 REVISION DATE: 12/12/2012

: VULKEM 345 CATALYST QUART

Version 5.0 Print Date 02/12/2013 REVISION DATE: 02/11/2013

: UNIVERSAL COLOR PACK SHADOW GRAY-cs

: EUCON WR 91 - BULK GALLONS

UT91 Version 2. Print Date 05/13/2010 REVISION DATE: 04/14/2010

EUCON CIA - BULK GALLONS Version 2. Print Date 09/13/2008 REVISION DATE: 09/12/2008

: DIAMOND - PLATE LIGHT REFLECTIVE

: ACCELGUARD GAL DRUM

240 COLOR PAK - ALUMINUM STONE 6 POUCHES Version 2.0 Print Date 10/24/2012 REVISION DATE: 07/08/2012

GEOFLEX WELDING SOLVENT 5 GL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

: EUCON DUSTROL - BULK GALLONS

: KUREZ W VOX - 55 GAL DRUM

TAMMSFLEX NS PART A Version 1. Print Date 06/10/2008 REVISION DATE: 02/07/2008

ALPHAGUARD M-PRIME - 1 GALLON Version 1. Print Date 04/18/2012 REVISION DATE: 10/05/2011

DURAL 435 PART A Version 3.0 Print Date 01/27/2015 REVISION DATE: 07/08/2012

: SUPER AQUA-CURE VOX

PLASTOL SPC - BULK GALLONS Version 3.1 Print Date 01/20/2015 REVISION DATE: 06/20/2013

: TAMMS EXPRESS REPAIR 50# BG

: N THINNER 1 GL

: SUPER DIAMOND CLEAR

Version 4.0 Print Date 10/28/2014 REVISION DATE: 10/27/2014

Material Safety Data Sheet

CLEARSEAL WB 150 Version 2.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

: LINSEED OIL TREATMENT

HEY'DI SEALING LIQUID 1GL/6PK Version 1. Print Date 07/13/2007 REVISION DATE: 12/12/2006

: DECKTITE WDS SEALER 1 US QUART

: DECKTITE WDS EQUIP CLEANER 5 GL.

CONCRETE SURFACE RETARDER F Version 2. Print Date 08/08/2008 REVISION DATE: 08/07/2008

: TREMPRIME LV 5 GALLON PAIL

PRIMER #1 Version 1.2 Print Date 12/05/2007 REVISION DATE: 09/01/2006

MORTAR COLOR#719 LIGHT CHOCOLATE -12/2.5 Version 1 Print Date 07/03/2007 REVISION DATE: 06/16/2005

OB-H-10 HYPALON CTG MIST GRAY 5 GL Version 2. Print Date 07/20/2011 REVISION DATE: 06/29/2009

: N-15 NON-FERROUS PRIMER 1 GL CN

: SPEED CRETE RED LINE 50# BAG

SUPER DIAMOND CLEAR VOX LOW VOC Version 2.0 Print Date 04/24/2013 REVISION DATE: 02/08/2013

LUSTER SEAL WB 300 Version 1.1 Print Date 09/11/2007 REVISION DATE: 09/10/2007

: TREMGLAZE POLYURETHANE CLEANER (12 OZ/CAN)12 AERO CANS/CS

Version 2.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

ALPHAGUARD BIO TOP COAT PART B - 1 GAL

: SOLARGARD ACRYLIC SEALER 5 GAL

SURFLEX TR Version 2.0 Print Date 03/07/2013 REVISION DATE: 07/08/2012

SPEED CRETE GREEN LINE Version 2. Print Date 09/23/2008 REVISION DATE: 09/22/2008

: TREMFLEX 834 SMOKE&SOUND WHITE-12 QT CTG

: EUCO DIAMOND HARD - 55 GAL DRUM

: TREMPRO 644 RED HIGH TEMP

TREMCO AVC PRIMER Version 4.0 Print Date 11/18/2014 REVISION DATE: 07/08/2012

: VULKEM 202 Part B. Material Safety Data Sheet SECTION 1 - PRODUCT IDENTIFICATION SECTION 2 - HAZARDS IDENTIFICATION SECTION 3 - PRODUCT COMPOSITION

: SPEED PLUG- 50# Bag (USE PAIL)

DYMONIC FC BRONZE Version 1.4 Print Date 05/08/2008 REVISION DATE: 05/07/2008

: REPUBLIC METAL PRIMER 5 GAL

Telephone FAX (503 : Emergency Phone : U.S. only: International Users Call Collect:

SG ACRYTHANE BIRCH WHITE -B 5 GAL PAIL Version 2. Print Date 07/07/2009 REVISION DATE: 06/29/2009

: INTEGRAL WATERPELLER POWDER

TAMMSCURE WB 30C Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Version 3.0 Print Date 12/23/2013 REVISION DATE: 07/08/2012

Version 3.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012

: DYMONIC FC ANODIZED ALUMINUM

PARASEAL 60MIL GM/LG BLACK 8' W x 180' Version 3.0 Print Date 03/05/2013 REVISION DATE: 07/08/2012

KUREZ DR VOX Version 3. Print Date 05/20/2009 REVISION DATE: 05/19/2009

POWERPLY STANDARD COLD ADHESIVE-52 LINED Version 1.1 Print Date 05/10/2011 REVISION DATE: 08/14/2007

: THIN-CRETE GROUT - 50# PL MSTY MAUVE

POWERPLY RUB COLD ADH-5 GAL (NWR&SWR)

Tstrata ISR Version 6.0 REVISION DATE: 11/21/2014

: ALUMANATION GL PL

LUSTER SEAL WB 150 Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012

Version 3.0 Print Date 07/09/2012 REVISION DATE: 07/08/2012. After Hours: Chemtrec

RAMUC PRO 2000-WHITE 2X1 US GAL Version 2. Print Date 04/08/2009 REVISION DATE: 04/03/2009

: EXOAIR FLEX LEF FOAM SEALANT

DURAL 50 LM 2:1 PART B Version 1.1 Print Date 05/28/2008 REVISION DATE: 03/20/2008

: TREMPRO/VULKEM 636 ALUMINUM 30 CTG/CS

VULKEM 351 LV GRAY 2 GAL Version 1.5 Print Date 05/31/2008 REVISION DATE: 04/21/2008

TAMMSCOAT FN 3100P Version 1. Print Date 05/30/2008 REVISION DATE: 09/21/2007

DURALCRETE-LV B Version 1. Print Date 07/13/2007 REVISION DATE: 06/08/2007

Version 3.0 Print Date 03/28/2013 REVISION DATE: 07/08/2012

EUCO QWIKJOINT UVR PART B - 5 GAL PAIL Version 3.0 Print Date 11/05/2012 REVISION DATE: 08/01/2012

: DYMONIC ALUMINUM STONE

TREMGLAZE S500 BLACK-30 CTG CS Version 2. Print Date 10/16/2008 REVISION DATE: 10/15/2008

: VULKEM 351 GRAY 5 US GAL/18.9 L

DURATREM EP PART A CURING AGENT Version 1.1 Print Date 10/11/2006 REVISION DATE: 09/01/2006

ICE COATING 5 GL Version 1. Print Date 08/27/2009 REVISION DATE: 08/12/2008

TREMPRO/VULKEM 626 GRAY 5 GAL S/S PAIL Version 1.2 Print Date 09/04/2007 REVISION DATE: 09/01/2006

VERTICOAT Version 4.0 Print Date 05/30/2013 REVISION DATE: 05/29/2013

FLEXOLITH 1:1 Version 3.0 Print Date 12/05/2013 REVISION DATE: 07/08/2012

VULKEM 350-R GRAY Version 1.4 Print Date 05/15/2008 REVISION DATE: 05/09/2008

VULKEM 951 NF SLATE GRAY KIT Version 1.1 Print Date 09/11/2006 REVISION DATE: 09/01/2006

DURALBOND Version 3.0 Print Date 12/05/2013 REVISION DATE: 07/08/2012

EUCO # 452 EPOXY SYSTEM LV Version 1 Print Date 10/22/2008 REVISION DATE: 06/13/2005

EUCO # 452 EPOXY SYSTEM MV Version 7.0 Print Date 04/29/2015 REVISION DATE: 02/13/2013

DURALKOTE 240 1:1 LT GRAY

EUCO # 452 EPOXY SYSTEM LV Version 4.0 Print Date 04/29/2015 REVISION DATE: 06/12/2013

Chemical Name: Vulkem 116 Polyurethane Sealant. Manufacturer: Tremco. Container size: 10.1oz. Location: VLA. Disposal: Place empty container in trash.

TREMGARD GAL Version 2. Print Date 10/09/2008 REVISION DATE: 10/08/2008

Transcription:

SECTION 1 - PRODUCT IDENTIFICATION Trade name : Product code : 359DC 05 COMPANY : Euclid Chemical Company 19218 Redwood Road Cleveland, OH 44110 Telephone : 1-800-321-7628 Emergency Phone: : U.S. only: 1-800-424-9300 International Users Call Collect: 1-703-527-3887 Product use : Coating SECTION 2 - HAZARDS IDENTIFICATION Emergency Overview Clear. Liquid. May cause moderate irritation to the respiratory system. May cause nausea, headaches, and dizziness. May cause drowsiness, weakness, and fatigue. Move to fresh air. If required, artificial respiration or administration of oxygen can be performed by trained personnel. Leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention. Acute Potential Health Effects/ Routes of Entry Inhalation : May cause moderate irritation to the respiratory system. May cause nausea, headaches, and dizziness. May cause drowsiness, weakness, and fatigue. Eyes : Vapor and/or mist may cause eye irritation. Direct contact may cause temporary redness and discomfort. Ingestion : May cause irritation to the mouth, throat and stomach. May cause gastrointestinal irritation, nausea, and vomiting. Skin : May cause moderate irritation. Aggravated Medical Conditions Pre-existing eye, skin, liver, kidney, and respiratory disorders may be aggravated by exposure. Chronic Health Effects Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling contents may be harmful or fatal. Prolonged or repeated contact/exposure to aromatic petroleum distillates may cause defatting, drying, and irritation of the skin, dermatitis, and central nervous system (CNS) effects. Fillers are encapsulated and not expected to be released from product under normal conditions of use. Target Organs: Skin, Eye, Lung, Liver, Kidney, Nerve, Reproductive SECTION 3 - PRODUCT COMPOSITION Chemical Name CAS-No. Weight % Dimethyl carbonate 616-38-6 > 60.0 Acrylic resin NJ TSRN# 51721300-5445P 10.0-30.0 Aromatic petroleum distillates 64742-95-6 3.0-7.0 1.0-5.0 1/6

Xylene 1330-20-7 0.1-1.0 Cumene 98-82-8 0.1-1.0 Tert-Butyl Acetate 540-88-5 0.1-1.0 Acetone 67-64-1 0.1-1.0 SECTION 4 - FIRST AID MEASURES Get immediate medical attention for any significant overexposure. Inhalation : Move to fresh air. If required, artificial respiration or administration of oxygen can be performed by trained personnel.leave area to breathe fresh air. Avoid further overexposure. If symptoms persist, get medical attention. Eye contact : Flush with water for at least 15 minutes while holding eye lids apart. Get medical attention immediately. Skin contact : Clean area of contact thoroughly using soap and water. If irritation, rash or other disorders develop, get medical attention immediately. Ingestion : Do not induce vomiting unless advised by a physician. Call nearest Poison Control Center or Physician immediately. SECTION 5 - FIRE FIGHTING MEASURES Flash point : 63 F, 17 C Method : Setaflash Closed Cup Lower explosion limit Upper explosion limit Autoignition temperature Extinguishing media : If water fog is ineffective, use carbon dioxide, dry chemical or foam. Hazardous combustion products Protective equipment for firefighters : Smoke, fumes.carbon monoxide and carbon dioxide can form.nitrogen oxides can form. : Use accepted fire fighting techniques. Wear full firefighting protective clothing, including self-contained breathing apparatus (SCBA).Water may be used to cool containers to minimize pressure build-up. Fire and explosion conditions : Vapor concentrations in enclosed areas may ignite explosively.product may ignite if heated in excess of its flash point.vapors may travel to sources of ignition and flashback.closed container, may burst when exposed to extreme heat.empty containers may contain ignitable vapors. SECTION 6 - ACCIDENTAL RELEASE MEASURES Use appropriate protective equipment. Avoid contact with material. Remove sources of ignition immediately. Stop flow of material if safe to do so. Contain spill and keep out of water courses. Ventilate area. SECTION 7 - HANDLING AND STORAGE Prevent inhalation of vapor, ingestion, and contact with skin eyes and clothing. Keep container closed when not in use. Precautions also apply to emptied containers. To prevent generation of static discharges, use 2/6

bonding/grounding connection when pouring liquid. Extinguish all ignition sources including pilot lights, nonexplosion proof motors and electrical equipment until vapors dissipate. Personal protective equipment must be worn during maintenance or repair of contaminated mixer, reactor, or other equipment. Keep container closed when not in use. Vapor may migrate to sources of ignition. Do not smoke, weld, generate sparks, or use flame near container. Store in sealed containers in a cool, dry, ventilated warehouse location. SECTION 8 - EXPOSURE CONTROLS / PERSONAL PROTECTION Personal protection equipment Respiratory protection : Wear appropriate, properly fitted NIOSH/MSHA approved organic vapor or supplied air respirator when airborne contaminant level(s) are expected to exceed exposure limits indicated on the MSDS. Follow manufacturer's directions for respirator use. Hand protection : Use suitable impervious nitrile or neoprene gloves and protective apparel to reduce exposure. Eye protection : Wear appropriate eye protection.wear chemical safety goggles and/or face shield to prevent eye contact. Do not wear contact lenses. Do not touch eyes with contaminated body parts or materials. Have eye washing facilities readily available. Protective measures : Use professional judgment in the selection, care, and use.inspect and replace equipment at regular intervals. Engineering measures : Use only in well ventilated areas. Provide maximum ventilation in enclosed areas.use local exhaust when the general ventilation is inadequate. Exposure Limits Chemical Name CAS Number Regulation Limit Form ACGIH TWA: 25 ppm Xylene 1330-20-7 ACGIH TWA: 100 ppm ACGIH STEL: 150 ppm OSHA PEL: 435 mg/m3 Cumene 98-82-8 ACGIH TWA: 50 ppm OSHA PEL: 245 mg/m3 SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES Form Color Odor ph Vapour pressure Vapor density Melting point/range Freezing point : Liquid : Clear : Aromatic Solvent : Heavier than air 3/6

Boiling point/range Water solubility : Negligible Specific Gravity : 1.05 % Volatile Weight : 84.9 % SECTION 10 - REACTIVITY / STABILITY Substances to avoid Stability Hazardous polymerization : Oxidizing agents.strong acids.strong bases. : Stable under normal conditions. Avoid welding arcs, flames or other high temperature sources. : Will not occur. SECTION 11 - TOXICOLOGICAL INFORMATION Xylene, CAS-No.: 1330-20-7 Acute oral toxicity (LD-50 oral) 4,300 mg/kg ( Rat ) 1,590 mg/kg ( Mouse ) 6,670 mg/kg ( Rat ) 3,523-8,600 mg/kg ( Rat ) 5,627 mg/kg ( Mouse ) Acute inhalation toxicity (LC-50) 6,350 mg/l for 4 h ( Rat ) 3,907 mg/l for 6 h ( Mouse ) 8,000 mg/l for 4 h ( Rat ) Cumene, CAS-No.: 98-82-8 Acute oral toxicity (LD-50 oral) 2,910 mg/kg ( Rat ) 1,400 mg/kg ( Rat ) Acute inhalation toxicity (LC-50) 2,000 mg/l for 7 h ( Mouse ) 8,000 mg/l for 4 h ( Rat ) 24.7 mg/l for 2 h ( Mouse ) Acetone, CAS-No.: 67-64-1 Acute oral toxicity (LD-50 oral) 9,800 mg/kg ( Rat ) 3,000 mg/kg ( Mouse ) 5,340 mg/kg ( Rabbit ) 5.2 g/kg ( Mouse ) 5,800 mg/kg ( Rat ) Acute inhalation toxicity (LC-50) 50.1 mg/l for 8 h ( Rat ) 76 mg/l for 4 h ( Rat ) Acute dermal toxicity (LD-50 dermal) 20,000 mg/kg ( Rabbit ) 20 mg/kg ( Rabbit ) SECTION 12 - ECOLOGICAL INFORMATION No Data Available SECTION 13 - DISPOSAL CONSIDERATIONS RCRA Class : D001: Reportable Quantity = 100 lbs. (Characteristic of ignitability) This classification applies only to the material as it was originally produced. Disposal Method : Subject to hazardous waste treatment, storage, and disposal requirements under RCRA. Recycle or incinerate waste at EPA approved facility or dispose of in compliance with federal, state and local regulations. SECTION 14 - TRANSPORTATION / SHIPPING DATA TDG / DOT Shipping Description: 4/6

UN1866, RESIN SOLUTION, 3, PG II SECTION 15 - REGULATORY INFORMATION North American Inventories: All components are listed or exempt from the TSCA inventory. This product or its components are listed on, or exempt from the Canadian Domestic Substances List. U.S. Federal Regulations: SARA 313 Components : SARA 311/312 Hazards : Acute Health Hazard Fire Hazard OSHA Hazardous Components : Xylene 1330-20-7 Cumene 98-82-8 OSHA Status: Considered hazardous based on the following criteria: : Irritant OSHA Flammability : Not Regulated Regulatory VOC (less water and : 320 g/l exempt solvent) VOC Method 310 : 7 % U.S. State Regulations: MASS RTK Components : Dimethyl carbonate 616-38-6 Penn RTK Components : Dimethyl carbonate 616-38-6 Acrylic resin NJ TSRN# 51721300-5445P Aromatic petroleum distillates 64742-95-6 NJ RTK Components : Dimethyl carbonate 616-38-6 Acrylic resin NJ TSRN# 51721300-5445P Aromatic petroleum distillates 64742-95-6 Components under California Proposition 65: WARNING! Contains chemicals known to the State of California to cause cancer, birth defects and/or other reproductive harm 5/6

SECTION 16 - OTHER INFORMATION HMIS Rating : Health 2 Flammability 4 Reactivity 2 PPE 0 = Minimum 1 = Slight 2 = Moderate 3 = Serious 4 = Severe Further information: For Industrial Use Only. Keep out of Reach of Children. The hazard information herein is offered solely for the consideration of the user, subject to their own investigation of compliance with applicable regulations, including the safe use of the product under every foreseeable condition. Prepared by: Rich Mikol Legend ACGIH - American Conference of Governmental Hygienists CERCLA - Comprehensive Environmental Response, Compensation, and Liability Act DOT - Department of Transportation DSL - Domestic Substance List EPA - Environmental Protection Agency HMIS - Hazardous Materials Information System IARC - International Agency for Research on Cancer MSHA - Mine Safety Health Administration NDSL - Non-Domestic Substance List NIOSH - National Institute for Occupational Safety and Health NTP - National Toxicology Program OSHA - Occupational Safety and Health Administration PEL - Permissible Exposure Limit RCRA - Resource Conservation and Recovery Act RTK - Right To Know SARA - Superfund Amendments and Reauthorization Act STEL - Short Term Exposure Limit TLV - Threshold Limit Value TSCA - Toxic Substances Control Act TWA - Time Weighted Average V - Volume VOC - Volatile Organic Compound WHMIS - Workplace Hazardous Materials Information System 6/6