VSD03M DIRECTIONAL CONTROL VALVES

Similar documents
MOUNTING SURFACE MOUNTING POSITION MAXIUMUM OPERATING PRESSURE FLUID OPERATING VISCOSITY FLUID CLEANLINESS HYSTERESIS REPEATABILITY THRESHOLD VOLTAGE

BW0500AO. ByWire Elements BW0500AO Element 4/3 with side ports IBW0500 Interface

Electrically Operated Pressure-Relief Cartridge, Size 10

Flow Controls. DG**-06 Series Stacking Valves. Vickers. ISO (D06) Interface Flows to 340 l/min (90 USgpm) Pressure to 210 bar (3000 psi)

Sandwich Valves. 1 Change in flow, temperature or fluid (SSU) rating will affect valve

Directional Valves. Hydraulic Operated Directional Valves

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Inverse Prop. Pressure-Relief Cart., Size 2 4

Directional Controls

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

Prop. 3-Way Pressure-Reducing Cart., Size 5 / SAE 08

Pressure reducing valve, pilot operated, Model 3DR

Intrinsically safe solenoid valves on/off controls - ATEX certification

Proportional Pressure-Relief Cartridge Valve, Size 2...4

Inverse Proportional Pressure-Relief Cart., Size 2 4

Inverse Proportional Pressure-Relief Cart., Size 2 4

Directional Controls

PVQ 13 A2 R SE 1 S 20 C-11 D

FEPA PNEUMATICALLY AND SOLENOID ACTUATED VALVES, ONE UNIT MOUNTED TYPE VPG

SDM to 8 sections monoblock valve D1WWDA02A

005 Series Modular Valves

Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11

PILOT OPERATED PRESSURE REDUCER VALVE - Series VR4R

Inverse Proportional Pressure-Relief Cartridge, Size 10

Dual Modular Safety Shutoff Valves. DMV-D/11 Series DMV-DLE/11 Series

Load Controls Screw In Cartridge Valves Pressures to 350 bar (5000 psi) Flows to 190 l/min (50 USgpm)

Pressure reducing valve, pilot operated

3-Way Safety Block DSV

Vickers. Flow Controls. Flow Controls FN, F(C)G, FRG. Released 6/94

Monoblock directional control valves ML - Directional control valve

DNS. Monoblock directional control valves DNS - Directional control valve

MECHANICALLY OPERATED DIRECTIONAL VALVES Rotary Type : DRT/DRG-02 Cam Operated : DCT/DCG-01, 03 Threaded Connection/Sub-plate Mounting

Dual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series

SPCH/ Blowing block

F05MSV-N* CONTINENTAL HYDRAULICS FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK F05MSV-N* - FLOW CONTROL VALVE, NON-COMPENSATED WITH CHECK

PRESSURE SEQUENCE VALVE TYPE UZK

PRESSURE COMPENSATORS TECNORD

Full Range Pressure Compensating Variable Flow Control

Function. Valve Size. Pilot Oil. p min. Bold: Designates Tier I products and options.

Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11

MV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:

FIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:

Cover headline. Cover subheadline. Check Valves

SPC*01 (2-way) SPC03/06 (2-way) Size NG6 NG10 NG16 NG25 DIN A10 ISO 4401 NFPA D05 CETOP 5 P, A, B:

Proportional Throttle Cartridges, Size 16

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series

Solenoid valves VZWF, force pilot operated

Dual Modular Safety Shutoff Valve with NEMA 4x Enclosure. DMV-D/604L Series DMV-DLE/604L Series

VALVES ISO 5599/1, SERIES IPV-ISV

SOLENOID VALVES AND PNEUMATIC VALVES

Dual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series

Dual Modular Safety shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634

4/2 way Pneumatic Solenoid Valve

D62 - D63 Directional Control Valve l/min

PVK OPEN LOOP PUMPS. Bulletin E

1 LS unloading (control valve, orifice, none) 2 LS max pressure relief. 3 Spool type

Dual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series

Check Valves. Pilot Operated Check Valves. Vickers. 4CG-10, 20 Series 4CS-03, 20 Series 4CT-06/10, 20 Series. Basic Characteristics.

Manapak Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM

Pressure reducing valve, direct operated

Pressure reducing valve, direct operated

Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series

Safety Shutoff Valves MVD/6 Series MVDLE/6 Series

Digital directional & flow control valves D-DF(R)G

Dual Modular Safety Shutoff Valves with Two-stage operation. DMV-ZRD/602 Series DMV-ZRDLE/602 Series

CV08-20 Check Valve DIRECTIONAL VALVES. DESCRIPTION A screw-in, cartridge-style, hydraulic check valve for use as a blocking or load-holding device.

4/3 Directional valve elements L85L1...(EDC-LV) with manual lever operated control with flow sharing control (LUDV concept) L85L1...

Min. Metered Flow Capacity L/min. Max. Oper. Pressure Kgf/cm (0.04)* F- FC G N -11 H01. Max. Metered Flow Capacity L/min.

TANDEM MODULATOR FOR OUTLET GAS FLOW: STEPPED (836 TANDEM) - CONTINUOUS (837 TANDEM) SERVO-CONTROLLED PRESSURE REGULATOR

RE / Meter out pressure compensator Sandwich plate design Type SCA... /Series 2X. Description of function, Section 1/6. Replaces: 09.

WK /2 WAY CARTRIDGE VALVE TYPE URZS 32 COVER FOR CARTRIDGE VALVE TYPE ULZS 32. Size 32 up to 42 MPa 700 dm 3 /min DESCRIPTION OF OPERATION

Pilot Operated Check Valves Catalog Quick Reference

MODULES. Maximum Flow U.S.GPM. Max. Operating Pressure MPa (PSI) L/min. 005 Series 25 (3630) Modular Valves. 01 Series 31.

Safety and Shut-off Block SAF/DSV

Ex-proof solenoid valves with spool position monitor on/off, with inductive proximity sensor - Multicertification ATEX, IECEx, EAC

4/3 Directional valve elements L8_P5 with proportional (ED-IP) control and with or without LS connections L8_P5 (ED-IP)

Directional spool valves type WE6 electrically. operated type WE6 series 32

180 Series Rotary Shear Directional Control Valve

W60 Spool & Sleeve Valves for ISO Bases (5599/I)

HIGH PRESSURE FILTERS DFDK Series Inline Duplex Filters 4568 psi up to 90 gpm

4 qwer 2/2 3/2 4/2. Intrinsically Safe. Air and Inert Gas Intrinsically Safe Valves Brass, or Stainless Steel Bodies 1/4" to 1" NPT SERIES.

Series 4 Cv= Air-Pilot operated valves. 3-way/2-position, 5-way/2-position, 5-way/3-position

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SV - Safety Shutoff Valve with Proof of Closure 1/2" NPT - 2" NPT. SV/614 Series SV-DLE/614 Series

Dual Modular Safety Shutoff Valves with NEMA 4x Enclosure DMV-D 704/604 DMV-DLE 704/604

VICKERS. SystemStak Valves. ISO ; NFPA-D03; 315 bar (4500 psi); 60 L/min (15.7 USgpm) GB 2027B

Z, Y, and X PURGE INDICATORS / CONTROLLERS

Model DE-1, VDE-1 and DE-2 Air Release Heads

Dual Modular Safety Shutoff Valves with Proof of Closure and NEMA Type 4x Enclosure DMV-D 704/624 DMV-D 704/634 DMV-DLE 704/624 DMV-DLE 704/634

Safety and Shut-off Block SAF/DSV

Cartridge Valves Technical Information. Pilot operated check valves. Quick reference

INVERS. Solenoid coil 24VDC 12 VDC Exm Exd Explosion protection marking:

Miniature controls. Contactors. Overload relays. Starters. Control relays

SPECIFICATIONS ATTENTION

L125 SERIES POST-COMPENSATED SECTIONAL LOAD SENSE VALVE

BERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features

Safety and Shut-off Block SAF/DSV

The Limit Switch with Better Seal, Shock Resistance, and Strength. General-purpose Limit Switch. Model Number Structure

Transcription:

NFPA SIZE D03 TYPICAL PERFORMANCE SPECIFICATIONS Performance is measured on a four-way circuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e. A or B port plugged. MAXIMUM FLOW RATE - (up to) 20 gpm 76 lpm MAXIMUM OPERATING PRESSURE P, A, B Ports* 5000 psi 345 ar T Port 3000 psi 207 ar DESCRIPTION As a valve spool shifts, the spool lands cross over the valve ody ports. This can produce instantaneous high flow rates. MAXIMUM AC Solenoids up to 400 cpm CYCLE RATE DC Solenoids up to 300 cpm MOUNTING SURFACE WEIGHT ANSI/B93.7M - 986 D03 ISO 440 Size 03 Single Actuator 3.2 ls..45 kg Doule Actuator 3.9 ls..77 kg SPOOL S AVAILABLE SEE CHART * 2000 psi (38 ar) maximum on valves with solenoid codes 37 and 68. All pressure drops shown on this page are ased on 00 SUS fluid viscosity, and 0.87 specific gravity. See the chart elow for other viscosities. Fluid CS 4.5 20.5 32 43 54 65 76 86 Viscosities SUS 75 00 50 200 250 300 350 400 Multiplier 0.93.00..9.26.32.37.4 For any other specific gravity (G ) the pressure drop (?P) will e approximately?p =?P (G /G). 4

TYPICAL PRESSURE DROP 60 0 9 8 6 5 4 3 2 7 20 PRESSURE DROP (psid) 80 S 40 0 0 2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 FLOW (gpm) FLOW PATH?P CURVES FLOW CURVE NUMBER SPOOL SPOOL SHIFTED SPOOL CENTERED TYPE P to to T P to B A to T P to A or B A or B to T P to T A 5 4 5 4 A Code 4 4 4 4 & 2 B 4 4 3 3 B Code 3 3 3 3 4 & 2 E 5 2 5 4 N/A 9 N/A F 5 5 N/A 8 N/A F Code 68 9 9 N/A 8 N/A F 5 4 5 4 N/A N/A G 2 5 2 5 5 N/A N/A H 2 6 5 2 N/A N/A 5 J 5 5 3 5 0 N/A N/A K 5 4 5 2 N/A 9 N/A L 6 7 6 7 N/A N/A 9 N 3 5 5 5 0 N/A N/A Q 5 2 2 6 N/A N/A 5 Suplate S (Full Circuit) 5

SPOOL DESCRIPTION SYMBOL SPOOL FUNCTION CENTER POSITION CROSSOVER A All ports locked All ports locked B All ports open All ports open E F P & A locked B to T P locked A & B to T All ports locked, or P & A locked B to T P locked A or B to T P locked P locked F A & B restricted A or B restricted to T to T G P to A or B P to A & B T & A or B T locked locked H J K L N Q P to A & T B locked P to B A & T locked P & B locked A to T P to T A & B locked P to A B & T locked P to B & T A locked All ports open All ports locked, or P to B, A & T locked All ports locked, or P & B locked, A to T All ports open, restricted All ports locked, or P to A, B & T locked All ports open 6

MAXIMUM FLOW ALL SOLENOIDS EXCEPT 39 AND 68 FUNCTION (lpm) (70 ar) gpm 000 psi (lpm) (38 ar) gpm 2000 psi (lpm) (207 ar) gpm 3000 psi (lpm) (276 ar) gpm 4000 psi (lpm) (345 ar) gpm 5000 psi N/A Not availale in this configuration. * 00% rated voltage required. 3500 psi maximum and 00% voltage required. MAXIMUM FLOW SOLENOID S 39 AND 68 ONLY F F G L E - K J & N H & Q AC DC AC DC AC DC AC DC AC DC AC DC AC DC AC DC AC DC (53) (45) (60) (45) 4 2 6 2 (60) (49) (64) (46) 6 3 7 72 (76) (68) (49) (38) (49) (57) (49) (57) (72) (72) (38) (45) (49) (49) (57) (53) (9) (23) 20 8 3 0 3 5 3 5 9 9 0 2 3 3 5 4 5 6 (53) (42) (53) (34) 4 4 9 (60) (45) (64) (49) 6 2 7 3 (76) (68) (49) (38) (49) (57) (49) (57) (72) (72) (38) (45) (49) (49) (57) (45) (5) (23) 20 8 3 0 3 5 3 5 9 9 0 2 3 3 5 2 4 6 (53) (38) (53) (9) 4 0 4 5 (60) (45) (64) (34) 6 2 7 9 (76) (64) (45) (30) (45) (45) (45) (38) (72) (72) (38) (45) (45) (42) (53) (45) () (5) 20 7 2 8 * 2 * 0 9 9 0 2 2 4 2 3 4 (53) (38) (53) () 4 0 4 3 (60) (42) (60) (23) 6 6 6 (76) (64) (42) (26) (5) N/A (5) (72) (72) (9) (38) (30) (30) (53) (45) () () N/A 20 7 7 4 4 9 9 5 0 8 8 4 2 3 3 (53) (38) (49) () 4 0 3 3 (60) (38) (60) (5) 6 0 6 4 (76) (57) (42) (26) (72) (72) (5) (9) (5) (5) (53) (45) (7.6) () N/A 20 5 7 9 9 4 5 4 4 4 2 2 3 FUNCTION (lpm) (34 ar) gpm 500 psi (lpm) (69 ar) gpm 000 psi (lpm) (03 ar) gpm 500 psi (lpm) (38 ar) gpm 2000 psi NOTE: Test voltage was 90% of rated voltage unless specified otherwise. Performance is measured on a four-way curcuit (full circuit). Performance may e reduced from that shown if a three-way circuit (half circuit) is used, i.e. A or B port plugged. F G L (30) (30) 8 8 (38) (45) 0 2 (38) (38) (38) (34) (9) 0 0 0 9 5 (26) (26) 7 7 (38) (45) 0 2 (38) (38) (38) (34) (9) 0 0 0 9 5 (26) (26) 7 7 (38) (38) 0 0 (38) (26) (38) (26) (9) 0 7 0 7 5 (26) (26) 7 7 (5) (26) (5) (9) (9) 4 7 4 5 5 (38) (38) 0 0 7

TYPICAL ELECTRICAL CHARACTERISTICS INRUSH HOLDING VOLTAGE & VOLTAGE CURRENT HOLDING CURRENT HOLDING FREQUENCY LIMITS (AMPS) CURRENT MIN. VOLT. POWER SOLENOID VOLTS - Hz. MIN. - MAX. MAX. (AMP) (AMP) (WATTS) 33L, 60L 20-60 08-26.49.39 24 2.0 0-50 99-6.58.45 26 34L, 6L 240-60 26-252.24.9 24.0 220-50 98-23.29.22 26 39L, 68L 20-60 08-32.9.5 0.0 0-50 99-2.2.7 0 42L, 70L 24 DC 2-26.00.00.88 24 44L, 75L 2 DC 0-3 2.00 2.00.67 24 DIMENSIONS NFPA D03 SIZE (Formerly D0) WRENCH ACCESS TO MOUNTING BOLTS THRU TOP OF VALVE ASSY. TYP ALL ASSY'S P,A,B T WATTS A SOL ASSY B SOL ASSY 4.4(F) 3.4 2.06.03.70 AC 2.3 DC FOR COIL REMOVAL CLEARANCE 2.5 AC SOLENOIDS 3. DC SOLENOIDS #0-24 UNC X.00" SOCKET HEAD CAP SCREW 4-5 LBS-FT TORQUE 3.00 (F) REF 8.0 AC SOLENOIDS 9.22 DC SOLENOIDS 2.5 AC SOLENOIDS 3. DC SOLENOIDS.84.92 MANUAL ACTUATOR PIN BOTH ENDS.03 T.25 B A.6.22 P.594 8

DIN CONNECTIONS #0-24 UNC X.00" SOC. HD. CAP SCREW 4-5 LBS-FT TORQUE.60 AC SOLENOID.82 DC SOLENOID 3.70 3.35.65 (F) TYP. 2.5 AC SOLENOID 3. DC SOLENOID.38 (F) TYP. 3.00 REF. 8.0 AC SOLENOID 9.22 DC SOLENOID 2.5 AC SOLENOID 3. DC SOLENOID.84 24-26 LBS-FT TORQUE CORE 5 LBS-FT MAX.TORQUE.65 (F) TYP..38 (F) TYP..26 REF. 3.00 REF. 5.5 AC SOLENOID 6. DC SOLENOID 5.77 AC SOLENOID 6.37 DC SOLENOID 9

ORDERING INFORMATION ONE ONE IF REQ D IF REQ D ONE ONE VSD03M G A DESIGN LETTER ADD IF REQ D PILOT TYPICAL ORDERING : VSD03M-3A-G-33L-A 0 2 3* 5* 6 FUNCTION OPTION Single operator 2 position Spring offset Doule operator 2 position Detented (No spring) Doule operator 3 position Spring centered Single operator 2 position Spring centered Single operator 2 position Spring offset * Operator identification reversed on L spool: VSD03M-3L: A solenoid on A port end, B solenoid on B port end. VSD03M-5L: A solenoid on A port end. VSD03M-5L-R: B solenoid on B port end. a SPOOLS REFER TO PAGE 6 FOR SPOOL AVAILABILITY SEALS VITON SEALS STANDARD MECHANICAL OPTIONS OMIT R M V Z* WD DESCRIPTION SINGLE SOLENOID A PORT END SINGLE SOLENOID B PORT END RIVET MOUNTING STEEL OVERRIDE PIN MANUAL OVERRIDE FOR SINGLE SOLENOID VALVE WASHDOWN * Availale with single solenoid valves only. ELECTRICAL OPTIONS OMIT B B3A* B3H* B4A** B4** B5A* B5H* HD DESCRIPTION DIN STYLE SOLENOIDS BOX W/TERMINAL POSTS, LIGHTS AND SURGE SUPPRESSOR BOX W/3 PIN MALE MINI RECEPTACLE, A PORT END BOX W/3 PIN MALE MINI RECEPTACLE, B PORT END BOXW/4 PIN MALE MICRO RECEPTACLE, A PORT END BOXW/4 PIN MALE MICRO RECEPTACLE, B PORT END BOX W/5 PIN MALE MINI RECEPTACLE, A PORT END BOX W/5 PIN MALE MINI RECEPTACLE, B PORT END HAZARDOUS DUTY BOX CLASS II GROUPS E, F, & G L * Connector conforms to ANSI/B93.55M - 98. ** Availale with DC solenoid valves only. Availale with single solenoid valves only. SOLENOID MFG. DESCRIPTION LISK SOLENOID VOLTAGE WITH DIN 43650 ELECTRICAL CONNECTIONS 20/0V 33 240/220 V 34 280/240 V 35 20/0V 39 (LOW FORCE) 42 24 VDC 44 2 VDC WITH 2 PIN CONNECTIONS 240/220V 52 HAZARDOUS LOCATION 60 20/0 V 240/220 V 6 20/0 V 68 (LOW AMP, LOW FORCE) 70 24 VDC 75 2 VDC NOTE: Solenoids not CSA approved.

COMPETITIVE CROSSOVER GUIDE This Crossover Guide compares performance and specifications of solenoid operated NFPA D03 mounting directional control valves. The information in this guide is the most recent availale, either from printed catalogs, or the internet. Items with the N/A notation have no availale information from either source. Specifications Continental Atos Bosch Denison Nachi Parker Rexroth Vickers Model Series VSD03M DH* 08WV A4D0 SS DVW 4WE6 DG4V Maximum Pressure 5000 4640 4600 5000 4570 5000 500 5000 Maximum Tank Pressure 3000 450 500 2000 2290 500 2300 500 Maximum Tank Pressure - Option 3000 2320 3000 3000 N/A 3000 N/A 3000 Temperature Range (Degrees F.) 0 to 200 0 to 58 0 to 20 0 to 20 4 to 40 N/A 0 to 22 0 to 49 Spools Availale 2 7 4 7 2 9 8 Maximum Flow Rate (gpm) 20 23 20 7.2 22 2 2 Pressure Drop @ 0 gpm 30 75 00 20 50 40 20 75 Solenoids Availale 9 9 2 9 9 0 5 6 Electrical Connections 3 3 3 4 2 4 4 5 Antishock / Softshift Option Option N/A Option Option Option Option Option Hazardous Duty Location Option Option N/A Option N/A Option N/A Option Explosion Proof Location Option Option N/A Option N/A Option N/A N/A Drip Proof Environment Option N/A Option N/A N/A Option N/A Option Weight - Single Solenoid 3.25 N/A 3. 3.8 3. 3.0 3.2 3.5 Weight - Doule Solenoid 4.0 N/A 4.2 4.4 4.0 3.5 4.3 4.5 20 VAC / 60Hz Inrush Amperage 2. 4.6.5 2.2.7.9.8 2.2 Holding Amperage 0.40 0.42 0.54 0.65 0.36 0.49 0.42 0.40 Holding Wattage 2 N/A 30 3 22 25 30 30 Solenoid Shift Time (ms) 2 20 to 45 0 20 0 to 20 3 0 to 20 8 Spring Return Time (ms) 5 20 to 80 50 8 20 to 30 20 5 to 40 32 Theoretical Cycling (Hz) 8.5 4 to 2 8.3 3. 0 to 6 5. 8.3 to 2 0 Actual Cycling (Hz) 6.67 2 0.5 2 5 N/A 2 N/A 24 VDC Solenoid Shift Time (ms) 35 20 to 45 20 to 60 46 0 to 20 32 25 to 45 60 Spring Return Time (ms) 30 20 to 80 0 to 60 27 20 to 30 40 0 to 25 40 Theoretical Cycling (Hz) 7.7 4 to 2.5 4.2 to 6.6 6.8 0 to 6 6.9 7. to 5 Actual Cycling (Hz) Other Criteria 5 2 0.5 4.4 5 N/A 4.2 N/A Buna-N Option Option N/A Option Option Option Option Option Viton Standard Option Standard Option Option Option Standard Option Neoprene Option Option N/A Option N/A Option N/A N/A EPR Option Option N/A Option N/A Option N/A N/A CSA Approved Yes N/A Yes N/A Option Yes N/A N/A ETL or UL Listed Yes N/A Yes N/A N/A CE Approved Yes N/A Yes N/A N/A Indicator Lights Standard Option Option Option Standard Option Option Option 00% Testing Yes N/A N/A Yes N/A Low Watt Option Yes Option Yes N/A Option Surge Suppression Standard Option Option N/A N/A