NOR-LAKE, INCORPORATED 727 Second Street P.O. Box 248 Hudson, Wisconsin 54016 dinecompany.com 800-955-5253 715-386-2323 800-388-5253 Parts 715-386-4291 FAX www.norlake.com NO LAKE KOLD LOCKER WALK-INS Standard Model Coolers, Freezers and Combination Cooler/Freezers In Stock for SAME DAY SHIPMENT STANDARD FEATURES STANDARD MODELS SHIP THE SAME DAY* Coolers, freezers and combination cooler / freezers Sizes from 3 6 x 6 to 8 x 20 Three heights: 6 7 & 7 7 with floor; 7 4 floorless Indoor or outdoor models Three temperatures: +35 F., -10 F., -20 F(-20 F 10 day ship). Capsule Pak refrigeration system (ceiling or wall mount) Air-cooled condensing unit (wall mount 10 day ship) Automatic condensate vaporizer. No drain line required on indoor units Time clock provided for automatic defrost on both coolers and freezers. 26 gauge corrosion resistant stucco embossed temper passed coated steel on all surfaces except interior floor Smooth aluminum interior floor (on models with floor) Floorless models supplied with NSF listed vinyl sealers Full 4 thick panels foamed-in-place with HFC-134a polyurethane insulation which is CFC and HCFC free 26 wide, self closing door Heavy duty adjustable cam-lift hinges Spring actuated door closer Deadbolt locking handle with independent key/pad lock feature and inside safety release Magnetic gasket Digital thermometer Floor double sweep gasket Perimeter heater wire Vapor-proof light Switch and pilot light Registered by UL to ISO 9001:2000 NSF, UL flame spread 25 on all panels; UL and CSA electrical listing on door sections UL and CSA electrical listing on complete Capsule Pak refrigeration systems City of New York (MEA) listed City of Houston listed LA County listed California State listed STANDARD FEATURES ** Most options are available two weeks from receipt of order. Please contact us for specific questions. * Some models ship in 5 or 10 days Oregon State listed USDA accepted Fifteen year panel warranty 18 month labor warranty One year parts warranty INDOOR MODELS: Hot gas condensate vaporizer OUTDOOR MODELS: White membrane roof and trim Refrigeration hood Door hood (optional) -20 Fahrenheit ambient controls OPTIONAL FEATURES** U-shaped shelving system Floor treadplate kit Exterior ramp Condensing unit air deflector kit Heater kit for cooler located outdoors in below 32 Fahrenheit ambient Leak detector / alarm (may be a requirement in some areas) Three phase electrical Remote Capsule Pak refrigeration systems Five year compressor warranty CEC compliant models available - - additional lead time maybe required 220/50/1 electrical CE approved models for international installations 8-4 & 8-7 heights Electric vaporizer (for Remote Capsule Pak applications) Nor-Lake, Inc. Registered to ISO 9001:2000 File No. A3204 KOLD LOCKER COOLERS, FREEZERS & COMBINATIONS SPECIFICATION GUIDE
A. B. WALK-IN SPECIFICATIONS Kold Locker walk-ins are built of modular panels, and are insulated with foamed-in-place HFC-134a polyurethane insulation which is CFC and HCFC free. Each panel is designed to ensure ease of installation, long term reliability and high insulating efficiency. All panels are manufactured with male and female mating rails to ensure proper alignment during installation. The polyurethane insulation wraps around the return bend metal seams on both section to create a light weight panel of exceptional strength and durability. All panels are a full four (4) inches thick and provide a superior insulating value. The foamed-in-place cam locking fasteners ensure an airtight seal for maximum energy efficiency. A. B. C. C. D. E. Kold Locker panel gaskets around the outer perimeter of the panel are continuous, without cuts or breaks at corners. The Nor-Lake patented gasket design provides a foamed-inplace gasket as an integral part of the panel. Gaskets cannot fall off or pull off during shipment or installation. Panels lock together tightly to assure an energy efficient walk-in. Edge caps for ends of floor and ceiling panels are foamed-in-place rather than overlapped ormechanically fastened. Edge caps cannot come loose, and they stay in place through the life of the walk-in. D. Floor Plan Layouts E. F. Kold Locker Single Room Coolers or Freezers * * * F. Panel Finishes: Interior and exterior complete to be 26 gauge corrosion resistant stucco embossed temper passed coated steel. Models supplied with a floor will include a smooth aluminum interior floor surface. Insulation: Panels to be four (4) inches thick, metal clad and foamed-in-place with HFC-134a polyurethane insulation which is CFC and HCFC free. Mini Kold Locker Walk-ins 3 6 x 6 0 x 6 7 and 3 6 x 7 0 x 6 7 Similar floor space as 3 door reach-in. Modular-easy to get into existing building, through doors and hallways. 20%-30% more capacity than 3 door reach-in. Expanded Kold Locker Coolers: Now three larger coolers are in stock for Same Day Shipment: 6 x 14, 8 x 12, 8 x 14 Single Compartment * 5 Day Ship
DOOR Door sections manufactured at Nor-Lake are factory tested to assure proper fit, performance and alignment. All doors feature a stepped profile design that serves as a barrier to air flow which results in an energy efficient door system. Each Kold Locker walk-in compartment is equipped with a 26 wide door. the height of the door opening varies with the series of Kold Locker walk-in ordered. The 45 Series has a 59 high door, the Standard Series (6 7 high) has a 66 high door and the 74 and 77 Series Kold Locker walk-ins have a 78 high door. The door is self-closing, flush mounted, infitting and constructed to incorporate heavy duty, molded ABS breaker which is permanently foamed-in-place. Doors are available with right or left side hinges and include two cam-lift hinges, top hinge field adjustable with locking set screw, spring actuated door closer, NL 9800 deadbolt locking handle with independent key/padlock feature and inside safety release. The doors are pre-hung in a four foot wide frame panel which is equipped with replaceable perimeter heater wire, magnetic stainless steel trim, digital thermometer, vapor-proof light fixture and switch with exterior pilot indicator light. The door section is completely pre-wired within concealed conduit inside the door frame panel. 115/60/1 electrical is field wired to a junction box which is surface mounted on the interior frame above the vapor proof light fixture. Hinges and door handle are mounted to 1/2 synthetic insulated tapping plates. Each door section is complete with a heavy gauge galvanized steel heated threshold. FLOOR CONSTRUCTION Floor panels (when supplied) are similar in construction to the wall panels except they are made to withstand uniformly distributed floor loads of up to 800 pounds per square foot. The interior floor metal is smooth aluminum. The 74 Series, floorless models, are supplied with a patented vinyl floor sealer to stop conductivity at floor level. This unique sealer sits flat on existing floors and fits tightly against the interior/exterior wall panels. The walk-in wall panel is supported on the shoulder of the sealer so the foam edge is free of compressing weight. The vinyl floor sealer is NSF listed. VAPOR PROOF LIGHT FIXTURE SPRING ACTUATED DOOR CLOSER DOORS FEATURE A STEPPED PROFILE DESIGN DEADBOLT LOCKING HANDLE NL 9800 Deadbolt locking handle with independent key/padlock feature and inside safety release. FLOORLESS MODELS ARE SUPPLIED WITH A PATENTED VINYL FLOOR SEALER
OUTDOOR MODELS: All Kold Locker walk-ins installed outdoors include a weather protection kit consisting of: One piece, 35 mill, white membrane roof material which requires no seaming or gluing to the top of the Kold Locker walk-in ceiling panels. Plastic strips for flashing the membrane roof material to the side of the Kold Locker walk-in wall panels are included. Trim is secured to the Kold-Locker wall panels with self drilling and self tapping TEK screws. In applications where the Kold Locker walk-in is installed next to a building, the trim can be used to secure the turned up membrane roof material to the building wall, with fasteners supplied by the equipment installer. Above door rain hoods are an option and should be included on installations where the door panels are exposed to the outdoor weather. APPROVALS: Kold Locker walk-in construction is approved by the National Sanitation Foundation and shall have the N.S.F. seal on the door section. Walk-in panels shall have a U.L. flame spread rating of 25. The door section is U.L. and C.S.A. listed for electrical safety. Registered by UL to ISO 9001 City of New York (MEA) listed City of Houston listed LA County listed California Sate listed Oregon State listed USDA accepted CEC Nor-Lake, Inc. Registered to ISO 9001:2000 File No. A3204 dinecompany.com C 2 3/4 6 0 (45 Series) 6 7 (STD Series) 7 3 5/8 (74 Series) 7 7 (77 Series) Kold Locker Model PHYSICAL SPECIFICATIONS * Consideration must be given to accessibility for service & free condenser air flow. Consult Factory. Subject to change without notice B D 38 F-35 F Ceiling 6 3/8 6 7 HIGH 7 4 HIGH & 7 7 HIGH UNIT INTERIOR CUBAGE UNIT INTERIOR CUBAGE KL45(6 0 High) 77 KL7745 100 KL46 105 KL7746 123 KL66 168 KL7766 196 KL68 231 KL7768 270 KL610 295 KL77610 344 KL612 357 KL77612 418 KL614 420 KL77614 490 KL88 318 KL7788 372 KL810 404 KL77810 473 KL812 490 KL77812 574 KL814 578 KL77814 675 E G F Corresponding Capsule Pak Refrigeration System 38 F-35 F Wall -10 Ceiling -10 Wall Door Opening Size W H Model 26 59 45 Series 26 66 STD Series 26 78 74 Series 26 78 77 Series -20 Ceiling KL45 501 050 060 060 N/A N/A KL366 501 050 050 060 N/A N/A KL367 501 050 050 060 N/A N/A KL46 501 050 060 060 100 100 KL66 501 050 075 075 100 100 KL68 050 050 100 100 150 150 KL610 050 050 100 100 150 150 KL612 751 075 150 150 150 150 KL614 100 N/A N/A N/A N/A N/A KL88 050 050 100 100 150 150 KL810 751 075 150 150 150 150 KL812 100 N/A N/A N/A N/A N/A KL814 100 N/A N/A N/A N/A N/A KL7746 501 050 075 075 N/A N/A KL7748 050 N/A 100 N/A N/A N/A KL7766 501 050 100 100 150 150 KL7768 050 050 100 100 150 150 KL77610 751 075 150 150 150 150 KL77612 751 075 150 150 151 150 KL77614 100 N/A N/A N/A N/A N/A KL7788 751 075 150 150 150 150 KL77810 751 075 150 150 151 150 KL77812 100 N/A N/A N/A N/A N/A KL77814 100 N/A N/A N/A N/A N/A KL7446 050 050 N/A N/A N/A N/A KL7466 050 050 N/A N/A N/A N/A KL7468 751 075 N/A N/A N/A N/A KL74610 751 075 N/A N/A N/A N/A KL74612 075 075 N/A N/A N/A N/A KL74614 100 N/A N/A N/A N/A N/A KL7488 075 075 N/A N/A N/A N/A KL74810 075 075 N/A N/A N/A N/A KL74812 100 N/A N/A N/A N/A N/A KL74814 100 N/A N/A N/A N/A N/A KOD45 501 050 060 060 N/A N/A KOD46 501 050 075 075 N/A N/A KOD66 050 050 100 100 N/A N/A KOD68 751 075 100 100 N/A N/A KOD610 751 075 150 150 N/A N/A KOD612 751 075 150 150 N/A N/A KOD614 100 N/A N/A N/A N/A N/A KOD88 751 075 150 150 N/A N/A KOD810 751 075 150 150 N/A N/A KOD812 100 N/A N/A N/A N/A N/A KOD814 100 N/A N/A N/A N/A N/A KOD7746 751 050 075 075 N/A N/A KOD7766 751 075 100 100 N/A N/A KOD7768 751 075 150 150 N/A N/A KOD77610 751 075 150 150 N/A N/A KOD77612 075 075 150 150 N/A N/A KOD77614 100 N/A N/A N/A N/A N/A KOD7788 075 075 150 150 N/A N/A KOD77810 075 075 151 151 N/A N/A KOD77812 100 N/A N/A N/A N/A N/A KOD77814 100 N/A N/A N/A N/A N/A A W H C -20 Wall
KOLD LOCKER WALK-IN SIZES AVAILABLE SINGLE COMPARTMENT SIZES The 45 Series is available in one size which is 4 wide x 5 long x 6-0 high. This model is supplied with a walk-in floor. This series ships in 5 days. The Standard Series of Kold Locker walk-ins are all 6-7 high and are all supplied with a floor. The sizes available are as follows: 4 wide x 6 long, 6 wide x 6 long, 6 wide x 8 long, 6 wide x 10 long, 6 wide x 12 long, 8 wide x 8 long, and 8 wide x 10 long. The 77 Series of Kold Locker walk-ins are all 7-7 high and are all supplied with a floor. The sizes available are as follows: 6 wide x 6 long, 6 wide x 8 long, 6 wide x 10 long, 6 wide x 12 long, 8 wide x 8 long, and 8 wide x 10 long. The 74 Series of Kold Locker walk-ins are all 7-3 5/8 high and are all supplied without a floor. Wall panels are installed on top of N.S.F listed vinyl sealers provided. The sizes available are as follows: 6 wide x 6 long, 6 wide x 8 long, 6 wide x 10 long, 6 wide x 12 long, 8 wide x 8 long, and 8 wide x 10 long. COMBINATION KOLD LOCKER COMPARTMENT SIZES: The Kold Locker combination cooler / freezer line is available in 6-7 high and 7-7 high models and are all supplied complete with a floor. All models are available in two widths, 6 wide and 8 wide. The overall length of the combination Kold Locker is determined by the size of the cooler compartment and freezer compartment desired. The available sizes are the same as available in their mating single compartment models. EXAMPLE #1: If you have determined that you need a 6 wide combination model your choices for cooler and freezer compartment lengths are 6, 8, 10 and 12. Therefore, if you desire both cooler and freezer to have lengths of 8 your overall combination dimensions will be 6 wide x 16 long. EXAMPLE #2: If you have determined that you need an 8 wide combination model your choices for cooler and freezer compartment lengths are 6, 8, and 10. Therefore, if you desire the cooler to be 8 long and the freezer to be 6 long, your overall combination dimensions will be 8 wide x 14 long.
SHELVING KITS Shelving kits specifically designed for each Kold Locker walk-in configuration are offered as an optional extra. These kits are shipped with the Kold Locker walk-in and Capsule Pak refrigeration system so that all necessary componenets are at your location promptly when you need them. the shelving sets are coded to correspond to the Kold Locker walk-in configuration ordered and are offered in either three or four tier. TWO TYPES OF SHELVING SYSTEMS ARE AVALIABLE FROM NOR-LAKE. A. Green Kote Shelving - Green epoxy coated shelves. 15 year guarantee against corrosion. B. Nor-Lake Standard Chrome Kote Shelving. Shelving system construction is identical. Select the shelving FINISH of your choice. Shelving posts are engineered for maxium strength. Shelves are adjustable on 2 centers. All shelves are N.S.F listed and are zinc coated with a heavy layer of Protoxy for a maximum life span under humid storage conditions. Special clips are utilized to gain the maxium square footage of storage space for each Kold Locker model. 14, 18 and 24 wide shelves are used as required for maximum storage capacity in each set. This wire shelving is ideal for storage of all refrigerated or frozen products. SHELVES: Shelves to have #9 (.148 ) guage crosswires spaced 3/4 on centers with crossbraces 1/4 (.192 ) minimum of 4-3/4 on center. Shelf Frames Channel to be 9/16 x 1 x.075 thick. Shelf Collars A round tapered 1-5/16 high steel collar to be welded at each corner. FINISHES A. Green Kote : Electrostatically applied green baked epoxy over zinc steel and brite basic wire. Thickness : 4-7 mill. B. Chrome Kote : Plated quality wire and steel. Surface nickel chrome plated. POSTS Posts to be.062 thick 1 O.D. round tubing notched every 2 on each corner of the post. POST LEVELERS Installed on the bottom of each post is nylon housing for a steel leveler 3/8-16 x 1-3/4. FINISHES A. Green Kote : Electrostatically applied green baked epoxy over zinc steel and brite basic wire. Thickness : 2-3 mill. B. Chrome Kote : Plated quality wire and steel. Surface nickel chrome plated. NOR-LAKE, INCORPORATED 727 Second Street Hudson, Wisconsin 54016 800-955-5253 715-386-2323 800-388-5253 PARTS/SERVICE 715-386-4292 FAX www.norlake.com Registered to ISO 9001:2000 File No. A3204 2006 NOR-LAKE, INC. Printed in U.S.A. Part Number: 079297 Revision Date: 2/06