HYDRAULIC CRAWLER CRANE

HYDRAULIC CRAWLER CRANE Max. Lifting Capacity: 00 ton x. m Max. Boom Length: m Max. Luffing Jib Combination: 78 m +

CONFIGURATION STD Long Boom Max. Lifting Capacity: 113. metric tons x 10.0 m Max. Boom Length: m SHL Luffing Boom Max. Lifting Capacity: etric tons x m Max. Boom Length: 8 m STD Luffing Boom Max. Lifting Capacity: 00 metric tons x. m Max. Boom Length: 78 m HL Luffing Boom Max. Lifting Capacity: etric tons x 7. m Max. Boom Length: 8 m 1

STD Luffing Jib Max. Lifting Capacity: 113. metric tons x 1.0 m Max. Combination: + HL Luffing Jib SHL Luffing Jib Max. Lifting Capacity: 113. metric tons x 1.0 m Max. Combination: + Max. Lifting Capacity: 113. metric tons x 1.0 m Max. Combination: 78 m + CONTENTS Configuration 1 Specifications 3 General Dimensions STANDARD Boom and Jib Arrangements 7 Working Ranges Luffing Boom Supplemental Data 1 Luffing Jib Supplemental Data 17 Luffing Boom Lifting Capacities 1 Long Boom Lifting Capacities 1 Luffing Jib Lifting Capacities 20 HEAVY LIFT HEAVY LIFT/ SUPER HEAVY LIFT Boom and Jib Arrangements 2 Working Ranges 27 Luffing Boom Lifting Capacities 31 Luffing Jib Lifting Capacities 32 SUPER HEAVY LIFT Working Ranges 37 Luffing Boom Lifting Capacities 1 Luffing Jib Lifting Capacities 2 Transportation Plan 7 Assembly/ Disassembly Parts and Attachments 1 2

SPECIFICATIONS Power Plant Load Hoist System Model:Hino diesel engine E13C-UV Type:Water-cooled, direct fuel injection, with turbocharger Complies with NRMM (Europe) Stage IIIA and US EPA Tier III. Displacement: 12.13 liters Rated Power: 320 kw/2,000 min -1 Max. torque: 1,0 N m/1,00 min -1 Cooling system: Liquid, recirculating bypass Starter: 2 V/ kw Radiator: Corrugated type core, thermostatically controlled Air cleaner: Dry type with replaceable paper element Throttle: Twist grip type hand throttle, electrically actuated Fuel filter: Replaceable paper element Batteries: Two 12V x 13Ah/HR capacity batteries, parallel connected. Fuel tank capacity: 00 liters Hydraulic System Six variable displacement piston pumps are driven by heavyduty pump drive. Two variable displacement pumps are used in H1 (main hook hoist) and left hand side propel circuit. Two variable displacement pumps are used in H2 (auxiliary hook hoist) and right hand side propel circuit. One of the other two pumps is used in W1 (boom), W2 (jib) or W3 (SHL mast) hoist circuit, and the other is used in the swing circuit. Control: Full-flow hydraulic control system for infinitely variable pressure to all winches, propel and swing. Controls respond instantly to the touch, delivering smooth function operation. Cooling: Oil-to-air heat exchanger (plate-fin type) Filtration: Full-flow and bypass type with replaceable element Electrical system: All wiring corded for easy servicing, individual fused branch circuits. Max. relief valve pressure: 32.0 MPa {32 kgf/cm 2 } Reservoir capacity: 710 liters Boom Hoisting System Powered by a hydraulic motor through a planetary reducer. Brake: A spring-set, hydraulically released multiple-disc brake is mounted on the boom hoist motor and operated through a counter-balance valve. Drum lock: External ratchet for locking drum. Drum: Double drum, grooved for 28 mm dia. wire rope. Line speed: Double line on first drum layer Hoisting/Lowering: 0~2 m/min x 2 Boom hoist reeving: 28 parts of 28 mm dia.high strength wire rope Boom backstops: Required for all boom lengths H1 and H2 drums for load hoist powered by a hydraulic variable plunger motors, driven through planetary reducers. Brake: A spring-set, hydraulically released multiple-disc brake is mounted on the hoist motor and operated through a counterbalance valve. Drum lock: External ratchet for locking drum. Drums: H1 and H2: m P.C.D. x 1,01 mm Lg. wide drum, grooved for 28 mm wire rope. Rope capacity is 70 m working length. Note: Rope lengths listed above denote drum capacity and may differ from actual rope lengths supplied when machinery is shipped. Line speed: 110 ~ 3 m/min *1 Single line on the first layer *1: Line speeds based on single line, no load and th layer of rope drum. Rated line pull: 137 kn {1.0 tf} Swing System Swing unit is powered by hydraulic motor driving spur gears through planetary reducers (3 sets), the swing system provides 30 rotation. Swing parking brakes: A spring-set, hydraulically released multiple-disc brake is mounted on swing motor. Swing circle: Triple-row roller bearing with an integral internally cut swing gear. Swing speed: 1.2 min -1 {rpm} Upper Structure Torsion-free precision machined upper frame. All components are located clearly and service friendly. Engine with low noise level. Cab & Control Totally enclosed, full vision cab with safety glass, fully adjustable, high backed seat with a head-rest and armrests, and intermittent wiper and window washer (roof and front window). Cab fittings: Air conditioner, convenient compartment (for tool), cup holder, ashtray, cigarette lighter, sun visor, roof blind, tinted glass, floor mat, foot-rest, shoe tray Controls: Five adjustable levers for all winches and swing controls 3

Lower Structure Steel-welded carbody with axles. Crawler assemblies are designed with quick disconnect feature for individual removal as a unit from axles. Crawler belt tension is maintained by hydraulic jack force on the track-adjusting bearing block. Crawler drive: Two independent hydraulic propel drive is built into each crawler side frame. Each drive consists of a hydraulic motor propelling a driving tumbler through a planetary gear box. Hydraulic motor and gear box are built into the crawler side frame within the shoe width. Crawler brakes: Spring-set, hydraulically released parking brakes are built into each propel drive. Steering mechanism: A hydraulic propel system provides both skid steering (driving one track only) and counter-rotating steering (driving each track in opposite directions). Track rollers: Sealed track rollers. Shoes (flat): 1,220 mm wide each crawler Max. travel speed: 1.0/0. km/h Max. gradeability: 20% Boom and Jib: Welded lattice construction using tubular, high-tensile steel chords with pin connections between sections. Boom and Jib Length Min. Length Max. Length (Min. Combination) (Max. Combination) STANDARD Luffing Boom 2 m 78 m Luffing Jib 2 m + 2 m + HEAVY LIFT Attachment Luffing Boom 8 m Luffing Jib + 2 m + SUPER HEAVY LIFT Luffing Boom 8 m Luffing Jib + 2 m 78 m + Weight Including base machine, counterweights = 10 t, carbody weights = 1 t, crawler weight = 20 t, 2 m Luffing boom and 00 t hook block. Not include quick connection STD devise and upper translifter. Weight: 00 metric ton *1 Ground pressure: 173 kpa {1.8 kgf/cm 2 } *1 Main Specifications (Model: SL00) Lift Enhancer HL Mast Additional Weight Luffing Boom Max. Lifting Capacity Length Long Boom Max. Lifting Capacity Length Luffing Jib Max. Lifting Capacity Boom Length (Min ~ Max) Jib Length (Min ~ Max) Luffing Angle Power Plant Model Engine Output Fuel Tank Capacity STD - - 00 t. m 2 ~ 78 m 113. t 2 ~ 2 ~ HL - 30 t 7. m 30 ~ 8 m 113. t 0 ~ m 113. t 30 ~ 2 ~ ß ~ 8ß Hino E13C-UV 320 kw/2,000 min -1 {rpm} 00 liters SHL ~20 t 30 t m 30 ~ 8 m 113. t 30 ~ 78 m 2 ~ Hoist Winch (H1, H2) Max. Line Speed Rated Line Pull (Single line) Wire Rope Diameter Working Speed Swing Travel Hydraulic System Pumps Max. Pressure Hydraulic Tank Capacity Weight Working Weight* Ground Pressure* Counterweight 110 m/min (1st layer) 137 kn {1.0 tf} 28 mm 1.2 min -1 {rpm} 1.0/0. km/h variable displacement 32.0 MPa {32 kgf/cm 2 } 710 liters Approx. 00 t 173 kpa {1.8 kgf/cm 2 } Upper: 1etric tons Lower: 1 + 20 metric tons *1: Including base machine, counterweights (= 10 t), carbody weights (= 1 t), crawler weight (= 20 t), 2 m Luffing boom and 00 t hook block. Not include quick connection devise and upper translifter.

GENERAL DIMENSIONS Crane Boom Unit: mm,830 1,00 R8,180 8,720 3,110 80,10 R8,180 1,220 Crane Boom Length: 2.0 - m Lift Enhancer SHL CRANE SHL FFING

Luffing Jib Unit: mm Luffing Jib Length: 2.0 -.0 m Luffing Boom Length: 2.0-72.0 m Boom Angle (8)

STANDARD BOOM AND JIB ARRANGEMENTS Luffing Boom Arrangements for Crane Boom length (m) 2 m L.0 7.8T L.0.0 7.8T L 7.8T Boom arrangement L.0 7.8T Symbol 7.8T.0 L Boom Length.0 m 7.8 m.0 m m 1.2 m Remarks Boom Base Tapered Boom Insert Boom Insert Boom Boom Top indicates the most flexible combination of insert luffing booms, which can be modified to form all shorter luffing boom arrangements. L.0.0 7.8T L 7.8T L.0 7.8T m L.0.0 7.8T L 7.8T L.0 7.8T L.0.0 7.8T L 7.8T L.0 7.8T 78 m L.0.0 7.8T L 7.8T Long Boom Arrangements Boom length (m) 78 m Boom arrangement L.0.0 T L T L.0 T L.0.0 T L T L.0 T Symbol T.0.0 L Boom Length.0 m.0 m.0 m m.0 m m.0 m Remarks Boom Base Tapered Boom Insert Boom Insert Boom Luffing Insert Jib Luffing Insert Jib Jib Top indicates the most flexible combination of insert long booms, which can be modified to form all shorter long boom arrangements. 8 m L.0 T.0 0 m L.0 T m L.0 T.0 7

Luffing Boom Arrangements for Luffing Boom length (m) 2 m Boom arrangement L.0 7.8T L.0.0 7.8T L 7.8T L.0 7.8T L.0.0 7.8T L 7.8T Symbol 7.8T.0 L Boom Length.0 m 7.8 m.0 m m 1.2 m Remarks Boom Base Tapered Boom Insert Boom Insert Boom Boom Top indicates the most flexible combination of insert long booms, which can be modified to form all shorter long boom arrangements. L.0 7.8T m L.0.0 7.8T L 7.8T L.0 7.8T L.0.0 7.8T L 7.8T L.0 7.8T Luffing Jib Arrangements Jib length (m) 2 m.0.0.0.0 Jib arrangement Symbol.0 Jib Length.0 m.0 m m.0 m Remarks Jib Base Luffing Insert Jib Luffing Insert Jib Jib Top indicates the most flexible combination of insert luffing jibs, which can be modified to form all shorter luffing jib arrangements..0.0.0 m.0.0.0.0.0 8

STANDARD WORKING RANGES Luffing Boom 8 80 70 0 0 0 80 78 m 70 0 0 m 2 m 0 0 30 Height above ground (m) 20 10 3.1 m 1. m 10 20 30 0 0 Radius from center of rotation (m) Center of rotation 0 70

Long Boom 8 80 70 0 110 100 0 0 m 0 m 80 8 m 78 m 0 70 0 0 0 30 20 Height above ground (m) 10 3.1 m 1. m 10 20 30 0 0 Radius from center of rotation (m) Center of rotation 0 70 80 10

STANDARD WORKING RANGES Luffing Jib Boom Angle: 8 ( Boom / Boom) 10 73 73 0 130 0 m 120 8 8m m m 110 3 m 100 73 0 1 0 80 m m 70 0 2 m 2 m 2 m 1 0 0 30 Height above ground (m) 20 10 11 3.1 m 10 20 30 0 0 0 70 80 Radius from center of rotation (m) 1. m Center of rotation

Luffing Jib Boom Angle: 7 ( Boom / Boom) 3 3 130 120 m 110 m 100 3 m m 0 3 1 1 m 80 70 0 2 m 2 m 1 0 0 30 Height above ground (m) 20 10 3.1 m 1. m 10 20 30 0 0 Radius from center of rotation (m) Center of rotation 0 70 80 0 12

STANDARD WORKING RANGES Luffing Jib Boom Angle: ( Boom) 100 3 0 80 1 70 m 0 0 2 m 2 m 1 0 30 20 Height above ground (m) 10 3.1 m 1. m 10 20 30 0 0 Radius from center of rotation (m) Center of rotation 0 70 80 13

1

FFING BOOM SUPPLEMENTAL DATA 1. Ratings according to EN13000. 2. Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. 3. Deduct weight of hook block(s), slings and all other load handling accessories from main boom ratings shown.. Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level, operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility to judge the existing conditions and reduce lifted loads and operating speeds accordingly.. Ratings are for operation on a firm and level surface, up to 1% gradient.. At any radius and boom length where no rating is shown on chart, operation is not intended nor approved. 7. Boom inserts and guy lines must be arranged as shown in the "operator's manual". 8. Boom hoist reeving is 28 parts of line. HL/SHL boom hoist reeving is 12 parts of line.. Boom backstops are required for all boom lengths. 10. The boom should be erected over the front of the crawlers, not laterally. 11. Ratings inside of boxes are limited by strength of materials. 12. (Main Boom Lifting) The total load that can be lifted is the value for weight of hook block, slings, and all other load handling accessories deducted from main boom ratings shown. 13. (Main Boom Lifting with Auxiliary Sheave Frame) The total load that can be lifted is weight of auxiliary sheave frame, main hook block, slings, and all other load handling accessories deducted from main boom ratings shown. Deduction auxiliary sheave frame STD/HL/SHL Crane Long Crane 0.2 ton 0.7 ton 1. (Auxiliary Sheave Lifting) The total load that can be lifted is weight of auxiliary sheave frame, main hook block, slings, and all other load handling accessories deducted from main boom ratings shown. Deduction auxiliary sheave frame STD/HL/SHL Crane Long Crane 0.2 ton 0.7 ton 1. Ratings shown, but it should not exceed 13.ton in case of one reeve. 1. Auxiliary sheave ratings at any radius from center of rotation are the same as crane ratings shown in table for main boom when operated at the same radius. But maximum angle is the same main boom maximum angle. 17. Boom lengths for auxiliary sheave mounting show below. STD Crane Long Crane HL/SHL Crane 2 m ~ 78 m ~ m ~ 8 m But the following auxiliary sheave ratings are none. STD crane boom for auxiliary sheave lifting without main hook : 2m boom LONG crane boom for auxiliary sheave lifting without main hook : 0m boom HL/SHL crane boom for auxiliary sheave lifting with / without main hook 30m boom is all radius. 3m boom is minimum radius to 10m. 2m boom is minimum radius to m. 18. Maximum hoist load for number of reeving parts of line for hoist rope. Main Hoist Loads (Double Drum) No. of Parts of Line 12 1 20 2 28 32 3 Maximum Loads (kn) 1,30 1, 2,7 2,883 3,2 3,7 3,23 Maximum Loads (t) 1.0 203. 2. 2.0 33.0 377.0 00.0 Main Hoist Loads (Single Drum) No. of Parts of Line 1 2 3 Maximum Loads (kn) 132 2 32 20 2 7 Maximum Loads (t) 13. 27.0 0.0 3.0. No. of Parts of Line 7 8 10 11 12 Maximum Loads (kn) 883 1,113 1,221 1,33 1,2 Maximum Loads (t) 0.0 101. 113. 12. 13.0 17.0 No. of Parts of Line 13 1 1 1 17 18 Maximum Loads (kn) 1, 1,8 1,70 1,8 1,7 1,1 Maximum Loads (t) 17. 18.0 178. 188. 18. 200.0 Auxiliary Hoist Loads No. of Parts of Line 1 Maximum Loads (kn) 132 Maximum Loads (t) 13. 1. Weight of hook block Weight of hook block Hook block 00 ton 200 ton 120 ton 70 ton 0 ton 13. ton * Ball hook Weight (t).. 3.0 3.10 2.00 0. *00 ton hook block: 200 ton hook block + additional sheaves. Operation of this equipment in excess of rated loads or disregard of instruction voids the warranty. 1

1

FFING JIB SUPPLEMENTAL DATA 1. Ratings according to EN13000. 2. Operating radius is the horizontal distance from centerline of rotation to a vertical line through the center of gravity of the load. 3. Deduct weight of hook block(s), slings and all other load handling accessories from luffing jib ratings shown.. Ratings shown are based on freely suspended loads and make no allowance for such factors as wind effect on lifted load, ground conditions, out-of-level operating speeds or any other condition that could be detrimental to the safe operation of this equipment. The operator, therefore, has the responsibility to judge the existing conditions and reduce lifted load and operating speeds accordingly.. Ratings are for operation on a firm and level surface, up to 1 % gradient.. At radii and boom lengths where no ratings are shown on chart, operation is not intended nor approved. 7. Boom and jib inserts and guy lines must be arranged as shown in the "OPERATOR'S MANUAL". 8. Boom hoist reeving is 28 part line. HL/SHL boom hoist reeving is 12 part line. Jib hoist reeving is 1 part line.. Boom and jib backstops are required for all boom lengths. 10. The boom should be erected over the front of crawlers, not laterally. 11. Ratings inside of boxes are limited by strength of materials. 12. (Luffing Jib Rating Loads) The total load that can be lifted is the value for weight of hook block, slings, and all other loads handling accessories deducted from luffing jib ratings shown. 13. (Luffing Jib Lifting with Auxiliary Sheave Frame) The total load that can be lifted is the value for 0.7 ton (Auxiliary sheave frame) the weight of hook block, slings, and all other loads handling accessories deducted from luffing jib ratings shown. 1. (Auxiliary Sheave Lifting) The total load that can be lifted over an auxiliary sheave is the value for 0.7 ton (auxiliary sheave frame), weight of hook block, slings, and all other loads handling accessories deducted from luffing jib ratings shown, but it should not exceed 13. ton. Boom and jib combinations for auxiliary sheave mounting are all boom and jib combinations. Auxiliary sheave ratings at any radius from center of rotation are the same as luffing ratings shown in table for jib when operated at the same radius. 1. (Luffing Jib Lifting with Main Hook) (Luffing Boom with Luffing Jib) The rating is none. 1. Luffing boom and jib combinations. Jib Length (m) 2 m m Boom Length (m) * ** *** 17 2 m * * * * * * * * m *** *** 78 m *** *** *** *** ** ** 8 m ** ** ** ** : All luffing jib combinations which is none. : All luffing jib combinations which is allowed. : STD Luffing jib combinations which is allowed. : STD Luffing jib combinations which is necessary the brocks for erection when erecting and lowering. : STD Luffing jib combinations which is necessary 10 ton additional weights. : SHL Luffing jib combinations which is allowed. : HL and SHL Luffing jib combinations which is allowed. HL Luffing jib combinations which is necessary the blocks for erection when erecting and lowering.

17. Maximum hoist load for number of reeving parts of line for hoist rope. For Jib Hook (Single Drum) No. of Parts of Line 1 2 3 Maximum Loads (kn) 132 2 32 20 2 Maximum Loads (t) 13. 27.0 0.0 3.0. No. of Parts of Line 7 8 Maximum Loads (kn) 7 883 1,113 Maximum Loads (t) 0.0 101. 113. For Auxiliary Sheave No. of Parts of Line 1 Maximum Loads (kn) 132 Maximum Loads (t) 13. 1. Luffing erection jib offset angle STD Luffing Erection Jib Offset Angle Boom Length (m) 2 m m Boom Length (m) m 78 m 2 m HL Luffing Erection Jib Offset Angle Boom Length (m) m 78 m 8 m Weight of hook block Hook block 120 ton 70 ton 0 ton 13. ton Ball Hook Weight (t) 3.0 3.10 2.00 0. 2 m 2 m 0 ~ 110 SHL Luffing Erection Jib Offset Angle 0 ~ 100 0 ~ 110 0 ~ 120 100 ~ 120 110 ~ 120 0 ~ 110 0 ~ 120 110 ~ 120 120 0 ~ 110 0 ~ 0 0 ~ 100 0 ~ 110 80 ~ 120 110 ~ 120 110 ~ 120 0 ~ 100 0 ~ 110 80 ~ 120 110 ~ 120 120 0 ~ 100 0 ~ 110 Jib Length (m) Jib Length (m) Jib Length (m) STD Luffing Jib 2 2 30 3 2 8 0 72 HL Luffing Jib 0 ~ 0 0 ~ 100 0 ~ 100 0 ~ 110 0 ~ 120 80 ~ 120 110 ~ 120 110 ~ 120 0 ~ 100 0 ~ 100 0 ~ 110 0 ~ 120 80 ~ 120 110 ~ 120 120 0 ~ 100 0 ~ 100 0 ~ 110 : All Luffing jib combinations which is none. : STD and HL Luffing jib combinations which is necessary the blocks for erection when erecting and lowering. 18. Maximum numbers of reeving parts of line for hoist rope luffing boom and jib combinations. Boom Length (m) 2 30 3 2 8 0 72 78 SHL Luffing Jib Boom Length (m) Boom Length (m) 30 3 2 8 0 72 78 8 2 30 8 8 7 30 8 7 30 8 7 m 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 110 0 ~ 110 70 ~ 120 0 ~ 120 0 ~ 120 110 ~ 120 m 0 ~ 0 0 ~ 100 0 ~ 110 0 ~ 110 70 ~ 120 0 ~ 120 110 ~ 120 120 m 0 ~ 0 0 ~ 100 0 ~ 110 0 ~ 110 3 8 7 7 7 3 8 8 7 7 3 8 8 7 7 : Combinations which is none allowed. Jib Length (m) 2 8 8 7 7 7 7 7 Jib Length (m) 2 8 8 7 8 7 8 7 7 Jib Length (m) 2 8 8 7 8 7 8 7 7 0 ~ 80 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 110 70 ~ 110 0 ~ 120 0 ~ 120 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 110 0 ~ 110 70 ~ 120 0 ~ 120 100 ~ 120 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 110 0 ~ 110 3 (Unit: degrees) 0 ~ 80 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 100 80 ~ 110 0 ~ 110 100 ~ 120 (Unit: degrees) 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 100 0 ~ 110 80 ~ 110 100 ~ 120 100 ~ 120 (Unit: degrees) 0 ~ 0 0 ~ 0 0 ~ 100 0 ~ 100 0 ~ 110 0 ~ 110 0 0 0 3 18

STANDARD Luffing Boom Lifting Capacities Working Radius (m) Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components. Ratings enclosed in gray-color box in the table require double-drum specifications. Working Radius (m) 1 Boom Length (m).0.0 7.0 8.0.0 10.0 1.0 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 Reeves Boom Length (m) 8.0.0 10.0 1.0 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 2.0 3.0 2.0 8.0.0 0.0.0 72.0. m/00.0 38.0 30.8 30. 2.0 233. 187.8 1. 133.7 11.3. 87.0 23.1 m/81. 3 0.0.0 72.0 8. m/113. 113. 113. 110. 100.3 0.8 80. 71.1 3. 7.0 2.2 7.2 2. 3.0 30. 2.0 22.2 18. 3. m /1.2.1 m/377.0 30. 30. 2. 233.1 187. 1.2 133.3 11.8 8.8 8. 7. 8. 1.8 28.3 m/1.2 32.1 m/113. 113. 10..2 87.0 7. 8.0 0...0. 0.7 33.8 28. 2.1 20. 17.3 1.7 12..1 m /.8 m/373. 30.1 30.1 2.3 232.7 187.1 1.8 133.0 11.2 8.1 8.7 7.7 7. 0..2 33. m/7. 32 Long Boom Lifting Capacities.7 m/... 2. 83. 73.8.0 7.8 1.8. 2.2 38. 31.8 2. 22. 18. 1.8 13.2 11.2..3 m /8.3 8 7. m/33. 30. 23. 232.0 18. 1.1 132.3 113.3 7.2 8. 7...7.0.0 38.3 38.7 m/37. 28 10. m /. 8.0 88. 80.2 70.7 2.3.1..3 0.2 3. 30.2 2. 21.3 17.8 1.8 12. 10.3 8... m /. 8 8.0 m/23.3 23.0 231. 18.8 1. 131.7 112.3.2 83. 73.. 8. 2. 3.8 37.0 31. 3. m/2. 2 8.0 11.0 m /8.2 8.2 8.0 77.3 8. 0.3 3. 7.8 2.8 38. 3.2 2.0 2. 20.3 1.8 1.0 11.7.7 7.8.2.7 3. 7.7 m /3.2 7 8. m/2. 2. 230. 18.0 13.7 130. 111.3.1 82. 72..2 7. 1. 2. 3. 30. 2.2.1 m/23. 20 0.0 11. m /7. 7. 73.1 70..8 7.0 0.8.3 0.7 3. 33. 27. 23.3 1. 1.1 13.3 11.2.1 7.3.8. 3.1.3 m/22.7 221.0 18.1 13.0 130.2 110.2.0 81. 71.3 3.0.2 0. 1.2 3.3 2.0 2.8 21. 18..3 m/18. 20.0 12.2 m /3.0 1..8 8.2.7.2 2. 38. 3.8 31. 2.3 18.2 1.0 12.7 10.3 8.3..1 3.7 Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components. This is rated for single drum.. m/201.2 200.8 17. 1.8 12.3 10.1 2.8 80.2 1.8..1 3.8 32. 27. 23.1 1. 1. 1.1. m/13. Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton 1 Boom Length (m) Working Radius (m) 8.0.0 10.0 1.0 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 10. m/171. 1. 1.2 107. 1.7 7.0 8.8 0. 3.7 7.8 38. 31. 2.1 21. 17.7 1. 12.1 10.2.7 m/.1 1 11.1 m/1.7 12.8 1 120. 10. 0. 77.7 7..3 2.. 37.2 30.1 2. 1.8 1. 12.7 10.2 8.1..8 m/.2 12 Boom Length (m) Working Radius (m).0.0 7.0 8.0.0 10.0 1.0 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 Reeves

Luffing Jib Lifting Capacity Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton 2.0 m Boom Length 2.0 2.0 3.0.0.0 Boom angle 8 7 8 7 8 7 8 7 8 7 1.0 1.0 18.0 2.0 2.0 113. 10.2 3.3 83.1 7.8 7. 0.0 78. 70.7.1 8. 113. 10. 2.7 82. 7.2 7.3 1. 3.3 7.8 10.3 1.7 81. 73.3. 0.7.7 3. 1.0. 3.1.7 2.1 3.0 3.7 8.7. 2. 7.8. 2.0.0 0.0.0 8.0 2.0.0 3.7 37.3 32. 1.7 38.8 3.2 3.2 31. 28. 70.8.0.2.2.2 3. 3.0 31.0 27.7 2.8 22.7 3.8 32.1 28. 2.3 22.7 20. 18.7 23.1 20.7 18. 1. 1.. 2.7 0.2.8 38. 33. 2. 2.2 23. 20. 18.3 1.2 30. 2.8 23.7 21.1 18. 1. 1.3 13. 7.0 11.1 Reeves 1. 1.1 13. 12.2 Boom angle 1.0 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 2.0 3.0.0.0 Boom angle 8 7 8 7 8 7 8 7 8 7 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 113. 10. 1. 81.8 73..8 1.0 8.2 1.. 1.. 1.3 3.0 113. 103.8 1.2 81.2 73.0.2 0.. 7.7 1.0. 1.1 3.8 38.1 3.1 30. 102.8 0.2 80.2 72.0.3..7.8 0.8 0.0 2.7 37.1 32. 2.1 2.7 2. 23.7.8 3. 8.1 3.2.3 3.1 3.2 30.3 27.0 2.3 3.1 30. 2. 23. 21. 1.3 17. 21.3 1.0 17.0 1.3 13. 3.0 0. 3. 37.8 32. 28. 2. 22.8 20. 18. 1.2 2.0 2. 22. 1.8 17.7 1.8 1.2 12. 11.7 1.3 13. 12.1 10.8.7 8.8 Reeves Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components. m Boom Length Boom angle 1.0 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 20

STANDARD Luffing Jib Lifting Capacity Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton 3.0 m Boom Length 3.0 3.0 8.0.0.0 Boom angle 8 7 8 7 8 7 8 7 8 7 18.0 2.0 2.0 3.0 102.2 8.7 7.8 71.7.0...7 3.3 8. 1.8. 88.7 78.8 70.8.1 8. 3.. 7.8 0.7 77.3.8 3.1 7. 2..8 3. 32. 3. 3.3 38.8 33. 2.0.0 0.0.0 8.0 2.0.0 7.0 32.0 28. 2. 31.0 27. 27.3 2.2 21. 3.0 30.1 2. 2. 2.1 23.2 20.8 18.8 8. 2.7 1. 17.7 1. 1.3 7.0 2.2.3 38.3 33. 2. 2.3 23.7 21. 33.3 28. 2. 22. 20.1 18.1 1.3 17.0 1.1 13. 12.2 11.1 3.3 0.8 3.0 3. 32.1 28.2 2. 22.2 1. 17. 1.2 1.8 23.8 20. 18. 1. 1.7 11.8 13.1 10. 11.8.2 10.7 8.2 7.3 82.0. Reeves 8 Boom angle 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 82.0 Reeves 2.0 m Boom Length Boom angle 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 2.0 3.0 8.0.0.0 8 7 8 7 8 7 8 7 8 7. 88.3 78. 70. 3. 8.3 3..8.7 3. 3. 30. 2.0 23.0 20. 87.8 3.3 7.7 3.0.3 3.3 3.1 33.8 2. 2.3 22.1 1. 17. Reeves 8 7 Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components. 7. 8. 1..3 1. 3. 37. 33.2 2. 2.3 32.0 27. 2. 21.7 1. 17. 1. 13. 12. 11.3 7.1 1..0 1.2 3. 37. 32.7 28. 2.7 23.0 1.1 27.3 23. 21.1 18.8 1.8 1.1 13.7 13.2 11.7 10.. 3.0. 2.1 3.1 31. 27. 2.3 21. 1.3 17. 1.7 1.3 22.3 1. 17.2 1.2 13. 10.7. 8.7. 8.7 7...8 Boom angle 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 21

Luffing Jib Lifting Capacity Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton 8.0 m Boom Length 8.0 3.0 8.0.0.0 Boom angle 8 7 8 7 8 7 8 7 8 7 18.0 2.0 2.0 3.0. 87. 77.7.8 3.2 7.7 2..3. 38.3 33.2 8.2 77.3.3 2.7 7.2 2..8 38. 37. 32. 8.0 1.. 1.1 3. 37. 2.0 2.1 3.2 28. 32. 2..0 0.0.0 8.0 2.0.0 7.0 21.0 18.7 2.1 22. 20.1 17.8 1. 1.3 2.1 2. 23. 20.7 18. 1. 1.0. 0. 13. 12.3 11.0.8 8..0 0.3 2. 3.7 32.0 28.2 2.1 22. 20.3 2. 22. 1.7 17. 1. 1.0 12. 11.3. 8.8 7.8 7.0 1..0 1.3 3. 30.7 2. 23.7 21.0 18.8 1. 1.2 13.8 Reeves 8 7 18.1 1. 1.0 12.3 10..7 8. 7.7 Boom angle 18.0 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves.0 m Boom Length Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0.0 3.0 8.0.0.0 8 7 8 7 8 7 8 7 8 7 8.2 7. 8.7 2.2.7 2.0. 3.3 31. 27. 2. 18.7 1. 1.8 8.0 7.1 8.2 1.7.2 1..0 38.2 33. 30. 2.7 23. 21.0 1. 13.8 12. Reeves 7 7 Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components..7..0.3 1.8 3.0 31.3 27. 2. 22.8 2.0 20.8 18.3 1.1 1.3 12.8..0.3 1.8 3.0 31.3 27. 2. 21. 1.7 20.8 18.3 1.1 1.3 12.8 11. 0.8 8.1 0. 3. 2.2 23.1 20. 18.3 1. 1.7 13.3 1. 1. 12.7 11.1.8 8. 7..7 Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 22

STANDARD Luffing Jib Lifting Capacity Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton 0.0 m Boom Length 0.0 3.0 2.0 8.0.0.0 Boom angle 8 7 8 7 8 7 8 7 8 7 2.0 2.0 3.0 2.0.0 0.0 71.0 71.0 7.0 0..2 0. 3.1 37. 32.8 28. 2. 21. 1. 71.0.8 0.3. 0.3 2.8 37.0 32. 28.7 2.3 21.3 18.8..3 3..3 1.8 3.1 31. 27.8 2.7 23.1 20.2 17.7.8 3..0 1. 3.7 31.1 27. 2.3.0 11. 1.8 22.2 1.7 21.7 8.0 2.0.0 7.0 82.0 10.2.1 1.1. 8.3 7. 13. 12. 1.. 0.3 3. 2. 1. 17.1 1.1 13. 11. 10.. 2.1 23.0 20. 18.2 1.3 1. 8.2 1. 13. 11.8 10.3.0 7...0.3 Reeves Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 82.0 Reeves.0 m Boom Length Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0.0 3.0 2.0 8.0.0.0 8 7 8 7 8 7 8 7 8 7 71.0 70....2. 2.3 3. 32.1 2. 23.1 20.2 17. 1.0.2 8.0 7.0.2 70.3..2 3..3 1. 3.2 31.7 22. 1. 17.3 1.3 13.7 Reeves Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components..8.8 2. 8.3 1.0 3.3 30.8 27.1 2.1 21. 18. 1.1 1.2 12. 11.2 10.0.1 2. 8.0 0.7 3. 30. 2.7 23.7 21.1 1.0 17.8 1. 13. 10..3 8.3 0.8 38.2 33.7 2.2 2. 22. 1.8 17.7 1.8 1.2 11.1 10.3 8. 7.7.7.7. Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 7.0 Reeves 23

Luffing Jib Lifting Capacity Unit: ton Counterweight: 10 ton, Carbody weight: 1 ton Crawler weight: 20 ton 72.0 m Boom Length Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 72.0 3.0 2.0 8.0.0 8 7 8 7 8 7 8 7 7.7 2. 8..7 1.3 3. 30.8 2.7 21. 18. 1. 1.8 7.1 2. 8.1.3 1.0 3.3 30.7 2. 23. Reeves Note: Designed and rated to comply with EN13000. Ratings shown in are determined by the strength of the boom or other structural components. 21.0 18.3 1.1 1.2 12. 11.3 1. 7. 3. 0. 3.1 30. 2. 23.7 21.0 18. 17.1 1. 13.1 11. 10.2.1. 3.3 0.1 3. 30.2 2. 23. 20.7 18.3 1.2 1. 12. 11.0. 8. 7. Boom angle 2.0 2.0 3.0 2.0.0 0.0.0 8.0 2.0.0 Reeves 2

HEAVY LIFT SUPER HEVY LIFT BOOM AND JIB ARRANGEMENTS Luffing Boom Arrangements for Crane Boom length (m) L.0.0 7.8T L 7.8T Boom arrangement L.0 7.8T L.0.0 7.8T L 7.8T Symbol 7.8T.0 L Boom Length.0 m 7.8 m.0 m m 1.2 m Remarks Boom Base Tapered Boom Insert Boom Insert Boom Boom Top indicates the most flexible combination of insert luffing booms, which can be modified to form all shorter luffing boom arrangements. L.0 7.8T m L.0.0 7.8T L 7.8T L.0 7.8T L.0.0 7.8T L 7.8T L.0 7.8T 78 m L.0.0 7.8T L 7.8T 8 m L.0 7.8T Luffing Boom Arrangements for Luffing Boom length (m) L.0.0 7.8T L 7.8T L.0 7.8T L.0.0 7.8T L 7.8T Boom arrangement Symbol 7.8T.0 L Boom Length.0 m 7.8 m.0 m m 1.2 m Remarks Boom Base Tapered Boom Insert Boom Insert Boom Boom Top indicates the most flexible combination of insert luffing booms, which can be modified to form all shorter luffing boom arrangements. L.0 7.8T m L.0.0 7.8T L 7.8T L.0 7.8T L.0.0 7.8T L 7.8T L.0 7.8T 78 m L.0.0 7.8T L 7.8T 8 m L.0 7.8T 2

Luffing Jib Arrangements Jib length (m) 2 m.0.0.0.0 Jib arrangement Symbol.0 Jib Length.0 m.0 m m.0 m Remarks Jib Base Luffing Insert Jib Luffing Insert Jib Jib Top indicates the most flexible combination of insert luffing jibs, which can be modified to form all shorter luffing jib arrangements..0.0.0 m.0.0.0.0.0 HL MAST UM LM Symbol UM LM Mast Length.0 m m.0 m Remarks HL Mast Base HL Insert Mast HL Mast Top SHL MAST UM LM 13.0 m Symbol UM LM Mast Length.0 m m 10.0 m Remarks HL Mast Base HL Insert Mast HL Mast Top 2

HEAVY LIFT WORKING RANGES Luffing Boom 8 80 70 0 0 0 80 8 m 78 m 70 0 0 m 0 0 30 Height above ground (m) 20 10 3.1 m 1. m 10 20 30 0 0 Radius from center of rotation (m) Center of rotation 0 70 27

Luffing Jib Boom Angle: 8 ( Boom / 78 m Boom) 73 73 0 10 10 0 130 120 2 2m m m m 110 73 0 1 1 100 0 78 m m 80 70 0 2 m 1 0 0 30 Height above ground (m) 20 10 3.1 m 1. m 10 20 30 0 0 0 70 80 Radius from center of rotation (m) Center of rotation 28

HEAVY LIFT WORKING RANGES Luffing Jib Boom Angle: 7 ( Boom / 78 m Boom) 3 10 3 130 m 120 m 110 100 3 1 1 0 78 m 80 m m 70 0 2 m 2 m 1 0 0 30 Height above ground (m) 20 10 2 3.1 m 1. m 10 20 30 0 0 0 70 80 0 Radius from center of rotation (m) Center of rotation

Luffing Jib Boom Angle: 120 3 110 m 100 0 1 80 m 70 0 2 m 1 0 0 30 Height above ground (m) 20 10 3.1 m 1. m 10 20 30 0 0 0 70 80 0 Radius from center of rotation (m) Center of rotation 30