Material Safety Data Sheet

Similar documents
Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Product Identification Product Name: Spray Blok 40

Material Safety Data Sheet

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Product Identification Product Name: Everkote 300

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET. COPPER CARE PRODUCT NAME: Aqua-Nap-5. ATTENTION: SAFETY MANAGER MSDS Number: Date of Last Revision: 04/10/2006

SAFETY DATA SHEET KOLORZ TOPICAL BENZOCAINE 20% GEL SECTION 1: IDENTIFICATION SECTION 2: HAZARD(S) IDENTIFICATION

Tween-20 - ULTRA PURE

MATERIAL SAFETY DATA SHEET

FIRST AID - SKIN CONTACT: IF ON SKIN: Gently wash with plenty of Soap and Water. If skin irritation occurs: Get medical advice/ attention.

MATERIAL SAFETY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION

*MATERIAL SAFETY DATA SHEET*

SAFETY DATA SHEET B-415 VER 15-1 DATE: 3/31/15 24 HOUR TELEPHONE NUMBER (CHEMTREC)

GF#136 ADHESIVE November 3, 2015 ***SAFETY DATA SHEET *** Page 1 of 5

1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No Colloidal Silica Suspension, 0.06µm

MATERIAL SAFETY DATA SHEET

Weight percent. CAS No.

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

MATERIAL SAFETY DATA SHEET MSDS DATE: 9/3/ Surfactant SUPERSEDES: None

Safety Data Sheet AQUASTRIP ACB. Better Chemistry. Better Business. Product Code : Hazard Category:

Activated Carbon %

Safety Data Sheet BOND 8000A

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

SAFETY DATA SHEET Lead Stop

Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).

OSHA regulated. NE NE No No No. NE NE No No No

Date Printed: 1/5/2016 Product: B Surface Preparation or Protection. (703) (Collect calls are accepted)

Material Safety Data Sheet

05/21/2015 EN (English US) 1/5

Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet. allergylabs.com. 1. Product & Company Identification. 2. Hazards Identification

24-HOUR EMERGENCY PHONE: CHEMTREC

Material Safety Data Sheet

This product is intended for research and laboratory use only. This product is not to be used as human or

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

SAFETY DATA SHEET. SDS #: 913 Date of Revision: 05/18 SECTION 1 -- PRODUCT IDENTIFICATION

Thoroseal Waterproofing Paint

Issue Date Revision Date Version 19-Sep Aug PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET. Inhalation of vapor or spray mist. Eye contact with the product, vapor or spray mist.

IDQ Operating, Inc. 44 Old Ridgebury Road Suite 300 Danbury, CT Tel Product And Company Identification

MSDS REPORT - CHEMICAL PRODUCT AND COMPANY IDENTIFICATION SAN FERNANDO MISSION BVD MISSION HILLS, CA 91345

CHAIN GUARD PR-500 SYNTHETIC PROOFER CHAIN LUBRICANT MATERIAL SAFETY DATA SHEET 1. PRODUCT AND COMPANY IDENTIFICATION

Date Printed: 2/17/2019 Product: M UPHOLSTERY/FABRIC CLEANER. Surface Preparation or Protection

Safety Data Sheet. BOSS 139 Hi-Temp Mortar. Section 1. Identification. Section 2. Hazards Identification. Synonyms Manufacturer Stock Numbers

SDS. GHS Safety Data Sheet. Wechem, Inc. D-Rust PRODUCT AND COMPANY IDENTIFICATION. Manufacturer HAZARDS IDENTIFICATION

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION. Product name: Starch Solution Product Number:

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Natural Solv-CE MATERIAL SAFETY DATA SHEET MATERIAL IDENTIFICATION. Product Name: Natrual Solv-CE Lyn Distributing

MATERIAL SAFETY DATA SHEET

04/21/2015 EN (English US) 1/5

24 hr. Emergency Contact (CHEMTREC) US Tel: Int l. Tel CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

SUPPLIER: PRODUITS CHIMIQUES ACP CHEMICALS INC

Material Safety Data Sheet

Material Safety Data Sheet Brij 35, 30% w/v. Section 1 - Chemical Product and Company Identification

PRODUCT AND COMPANY IDENTIFICATION

1. Product And Company Identification

1. Product And Company Identification

MATERIAL SAFETY DATA SHEET

MATERIAL SAFTEY DATA SHEET

1. Product And Company Identification

Material Safety Data Sheet SeaKlear: Phosphate Remover

CAS-No. EC-No. Index-No. Concentration Cellulose May be harmful if inhaled. May cause respiratory tract irritation.

SAFETY DATA SHEET Earth Juice Elements Grow. 1. Product And Company Identification

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

HMIS Rating. Material Safety Data Sheet Bomanite Surface Deactivator. Revision Date: Version: 1

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H61LV BILLERICA, MA 01821

Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

1 CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2 COMPOSITION / INFORMATION ON INGREDIENTS

Revision Date: March 5, 2014 Page 1 of 6 SECTION 1: IDENTIFICATION SECTION 2: HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET Certis USA 9145 Guilford Road, Suite 175 Columbia, Maryland 21046

Material Safety Data Sheet SeaKlear: Free & Klear

LUMINOX. Section 1 : PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET PAGE 1

Material Safety Data Sheet

SAFETY DATA SHEET. TRD Revision 01/30/ PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDOUS IDENTIFICATION

: Red Caries Indicator

Material Safety Data Sheet

Safety Data Sheet. (Theobromine) Theobromine DATE PREPARED: 11/18/2015. Section 1. Product and Company Identification. Product Name CAS Number

Material Safety Data Sheet

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Safety Data Sheet REMEDY OLIVAMINE CALAZIME SKIN PROTECTANT PASTE

Safety Data Sheet. Section 2. Hazards Identification. Not classified. Caution - substance not yet fully tested.

MATERIAL SAFETY DATA SHEET MSDS DATE: 8/14/12

Transcription:

Material Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION Product Identification Product Name: Product Use: ICE Minus 9 (RL-9) Freeze-Thaw Resistance Amendment Company Identification Edison Coatings, Inc. 3 Northwest Drive Plainville, CT 06062 Edison Coatings Tech Info Phone: 1-860-747-2220 Emergency Phone: 1-800-535-5053 2. HAZARDS IDENTIFICATION Primary Routes of Exposure: Eye contact Ingestion Skin Contact Eye Contact: May cause irritation Skin Contact: May cause drying irritation Ingestion: May be harmful if swallowed Inhalation: May cause irritation of throat or lungs Target Organ and Other Health Effects: No information is known on relative effects on target organs.

Carcinogens: This product does not have any carcinogenic effects. 3. COMPOSITION/INFORMATION ON HAZARDOUS INGREDIENTS Ingredient Name CAS-No. Ammonia 7664-41-7 Approx. Chemical Name Weight% <0.2% Ammonia 4. First Aid Measures Eye Contact: Flush eyes with plenty of water for 15 min. while holding eyelids open. Get medical attention. Skin Contact: Wash affected areas with cool water. Ingestion: May be harmful if swallowed. Consult a physician. Inhalation: Remove victim to fresh air. Medical Conditions Aggravated by Exposure: There are no known pre-existing medical conditions aggravated by this product. 5. FIRE FIGHTING MEASURES Extinguishing Media: Foam, carbon dioxide, dry chemical, water fog Unusual fire and explosion hazards: None Fire Fighting Procedures: A face shield should be worn. Firefighters should wear butyl rubber boots, gloves, and body suit and a self-contained breathing apparatus.

6. ACCIDENTAL RELEASE MEASURES Action to be taken if material is released or spilled: If the material is spilled, remove with an inert absorbent. 7. HANDLING AND STORAGE Precautions to be taken in handling and storage: Normal temperatures do not affect the material. Avoid breakage of packaged material or spills of bulk material. Avoid opening drums in unventilated areas to avoid concentrated ammonia vapors. 8. PERSONAL PROTECTIVE EQUIPMENT AND EXPOSURE CONTROLS Personal Protective Equipment Eye and Face Protection: Safety goggles. Skin Protection: Industrial work clothes should be worn. Gloves should be worn when handling this product. Other Personal Protection Data: Eye wash fountains and safety showers should be available for emergency use. No other special requirements are necessary. Respiratory Protection: If spray mists are generated, wear NIOSH approved particulate respirator. Ventilation: Use local exhaust or general dilution ventilation to control exposure within applicable limits. Exposure Guidelines There is no data available on either OSHA Permissible Exposure Limits (PEL s) or ACGIH Threshold Limit Value (TLV s) for components of product.

9. PHYSICAL PROPERTIES Odor: Slight Ammonia odor Physical State: Liquid ph: Vapor Pressure (mmhg): >760 at 20 C Vapor Density (Air=1): Lighter than air Boiling Point: 212 F Solubility in Water: Miscible Coefficient of water/oil distribution: Density (grams per milliliter): 1.05 Evaporation Rate (Ether=1): Slower Flash Point (Fahrenheit): >200 Flash Point (Celsius): >93 Lower Explosive Limit (%): Upper Explosive Limit (%): Autoignition temperature: 10. STABILITY AND REACTIVITY Stability: Conditions to Avoid: Incompatibility: Hazardous Polymerization: Hazardous Decomposition Products: Sensitivity to static discharge: All components are stable. Sub-freezing temperatures Strong oxidizing agents None anticipated. Normal decomposition products include carbon dioxide, carbon monoxide, and oxides of nitrogen. Not determined. 11. TOXICOLOGICAL INFORMATION Toxicity Ammonia is toxic by ingestion. LD50, Oral-rat: 350 mg/kg. LCLo, inhalation-rat: 2000 ppm/4h Although the concentration in this product is low, the high vapor pressure of ammonia makes it possible to exceed the TLV or PEL in the drum head space of confined areas. The liberation of ammonia may be retarded because of chemical neutralization in the product. Mutagens/Teratogens/Carcinogens: This product is not listed as a carcinogen by NTP, OSHA, or IARC. No constituents of this product are listed as carcinogens by NTP, OSHA, or IARC.

12. ECOLOGICAL DATA No information on ecology is available. 13. DISPOSAL CONSIDERATIONS Dispose in accordance with local, state, and federal regulations. This product is not a hazardous waste under RCRA Regulations (40 CFR 261), but may be regulated by other jurisdictions. 14. TRANSPORTATION INFORMATION DOT Non-Bulk : Not Regulated IATA : Not Regulated IMDG : Not Regulated 15. REGULATORY INFORMATION TSCA All components of this material are included on the Toxic Substances Control Act Inventory of Chemical Substances. 16. OTHER INFORMATION Effective Date: Revision Date: 06/Jan/2014 06/Jan/2014