A high flying simplicity DUAL SOFT BAG INJECTION SYSTEM

A high flying simplicity DUAL SOFT BAG INJECTION SYSTEM

THE INNOVATIVE SOLUTION for contrast media and saline injection in CT medical imaging Designed for MULTI-USE Dual soft bag injector for MONO & BI-LIQUID injections COMPATIBILITY with all contrast media and saline products COMPLETE RANGE OF DISPOSABLES COMPLETE RANGE OF SERVICES With its unique soft bag technology, FlowSens promotes a "high flying simplicity"

INTUITIVE DESIGN TO IMPROVE YOUR WORKFLOW SIMPLE INSTALLATION FOR 12H OF USE - Quick and easy loading in the chambers - 3 easy steps with PREFILLED BAG configuration 1 2 3 Load Prime Inject - Pre connected disposables with BAG TO FILL configuration - Up to 5-7 patients with 500mL bag only the secufill /secufill XL to change between patients ERGONOMIC INTERFACE - 2 wide screens: injector & console AUTOMATIC OPERATIONS - Bag and volume auto detection - Semi-auto priming EASY CLEANING - Wide opening doors Time saving, enhancing patient throughput

* CHOICE FOR FREEDOM WIDE RANGE OF DISPOSABLES FOR 12H OF USE - Use a new secufill /secufill XL patient line for each patient - Use with prefilled bag, bag to fill or both - Use with vials or bags - Mono or bi-liquid manyflow S softbag manyflow S ScanBag manyflow S vial O F FOR H U S E secufill Transfer line for soft bag filling with CM* in ScanBag Injection line for CM* in ScanBag Transfer line for CM* in vial manyflow D CM softbag / NaCl vial manyflow D CM ScanBag / NaCl vial manyflow D 2 vial Single use safety patient line with double-level valve - 23cm secufill XL Transfer line for soft bag filling with CM* in ScanBag and NaCl in vial Transfer line for CM* in ScanBag and NaCl in vial Transfer line for CM* in vial and NaCl in vial Single use safety patient line with double-level valve - 100cm *CM = contrast media

* ENHANCED SAFETY HARMONIOUS DESIGN FOR THE PATIENT - Smooth shapes, no syringe, friendly colours RISK REDUCTION OF AIR INJECTION - 4 auto-air detectors - Bag to fill - Automatic pre-priming - Compulsory priming BETTER ASEPSIS - Soft prefilled bag with luer connection - 1 unique pre connected set IMPROVED SAFETY - Check-valve: no backflow towards filling tubes ACCURATE PRESSURE MONITORING 2 pressure limit detection CLEAR WORKPLACE - No cables in ceiling mount version

* COST-EFFICIENCY QUICK WORKFLOW 1 UNIQUE PRE CONNECTED SET FOR 12 HOURS OF USE only the secufill /secufill XL safety patient line to change TIME SAVING with PREFILLED BAG configuration 1 2 3 Intuitive Time optimized Cost optimized CONTRAST MEDIA SAVING with BAG TO FILL configuration SOFT BAGS simplifie and reduce transport, storage and waste management Soft bag for soft bag injection system Syringe for syringe injection system ACCURATE HYDRAULIC TECHNOLOGY FLOW-RATE GUARANTEED thanks to a proprietary controlling software OWN PROVEN SOFT BAG TECHNOLOGY more than 10 YEARS of experience

* SERVICES RANGE Installation Customer Support Customization Upgrades Updates User training Curative maintenance Preventive maintenance

Your customer support These medical devices are intended for use by medical imaging and diagnostic health professionals, for injection of contrast media and saline solutions during a CT exam. CE certificated. Certifying organization: LNE G-Med (CE 0459). For complete information about precautions and optimal usage conditions for these medical devices, we recommend consulting the instructions notices/user s manuals. FlowSens Class: II b. Technical data: Use with prefilled bags, bags and vials. Installation: ceiling-mount/pedestal. Flow rate: 0.3 to 10mL/s. Maximum pressure: 21bar / 2100kPa / 305PSI. Limit of pressure: programmable. Pressure monitoring: graphical & numerical. Bag maximum capacity: 500mL. Number of phases: 6. Volume per phase: 1 to 220mL. Air detection: automatic. Number of filling speeds: 3. Filling: manual / automatic. Priming: manual / automatic. Delay between phases: 0 to 900s. Vein test: flow rate & volume: same limits as for the injection. Scan Delay: 0 to 300s, with or without dry contact. Injection Delay: 0 to 300s, with or without dry contact. Temperature maintaining: yes. Patient time clock: yes. Countdown timer: yes. Same Patient: yes. Simultaneous Injection: 20<=>80%. Memory capacity (protocols): 20 libraries, 4000 protocols. Memory capacity (historical & statistics): 24000 injections, 300000 events. Voltage: 230V AC. Power frequency: 50-60Hz. Power consumption: 1000VA. Injector pedestal dimensions / weight (H x W x D): 1422 x 750 x 750mm / 75kg. Injector ceiling mount dimensions / weight (H x W x D): 1016 x 358 x 503mm / 60kg. Remote console dimensions / weight (H x W x D): 355 x 300 x 249mm / 3,5kg. Power unit dimensions / weight (H x W x D): 654 x 668 x 356mm / 70kg. Complying with European Directive ROHS 2011/65/UE. monoflow S ScanBag ; manyflow S ScanBag ; monoflow S vial; manyflow S vial; manyflow S softbag; monoflow D CM ScanBag / NaCl vial; manyflow D CM ScanBag / NaCl vial; monoflow D 2 vial; manyflow D 2 vial; manyflow D CM softbag / NaCl vial Class: II a. Technical data: Maximum Pressure: 325 PSI (2240kPa). Injection line useful length: 1.75m. Maximum priming volume: 10mL. Inner diameter: 2.3mm. Outer diameter: 4.1mm. Soft bag A volume: 500mL. Soft bag B volume: 500mL. The multiple use of manyflow disposables is intended for multi-patients markets. secufill /secufill XL single use patient lines for CT Class: II a. Technical data: Length: 23cm / 100cm. Maximum Pressure: 305 PSI (2100kPa). Residual volume: 1,2mL / 4,1mL. Inner diameter: 2.3mm. Outer diameter: 4.1mm. Use a new secufill or secufill XL patient line for each patient. Ensure that injection from multi-dose containers and to more than one patient respects the valid rules of good practice and the marketing authorisation (MA) of the contrast agent and local regulatory requirements. Manufacturer: MEDEX - 240 Allée Jacques Monod - 69800 Saint-Priest - France Document revision date: February 2016. FlowSens, monoflow, manyflow and secufill are trademarks of Guerbet. Patents requests on-going. Copyright 2016 Guerbet - All rights reserved. M-Z002656-04 - February 2016 - Conception : Annapurna 8000 - Photos : Guerbet, Shutterstock. www.flowsens.com