RMF @ Measured Temperature RMC @ Measured Temperature Source RMF RMC RM @ MRT RMF @ MRT Maximum Recorded Temperatures Circulation Stopped Time Logger On Bottom Time Unit Number Location Recorded By Witnessed By Kevin Stiles 346 Weston, WV Michael Winter 31 Aug 21 :53 @ 125 degf @ @ @ @ @ @ @ @ @ MUD Fluid Loss PH Source Of Sample RM @ Measured Temperature Density Viscosity Logging Date Run Number Depth Driller Schlumberger Depth Bottom Log Interval Top Log Interval Casing Driller Size @ Depth Casing Schlumberger Bit Size Type Fluid In Hole 2762 ft 8.75 in Air lbm/gal 2762 ft 9.625 in @ 2762 ft @ 31 Aug 21 1 734 ft 7346 ft 7338 ft County: Field: Location: Well: Company: API Serial No. 47 13 2558 District: Grant Watershed: Trib of Wyatt Run Quad: Pine Grove 7.5 Drilling Measured From: KELLY BUSHING Wetzel Heather LAT: 39.52758* Mills Wetzel #1H Stone Energy Corporation LOCATION Log Measured From: KELLY BUSHING 1. ft above Perm. Datum Permanent Datum: GROUND LEVEL Elev.: 1331. ft D.F. 1341. ft LONG: 8.67386* G.L. 1331. ft LAT: 39.52758* Elev.: K.B. 1341. ft GAMMA RAY / CALIPER ARRAY INDUCTION PLATFORM EXPRESS Well: Field: County: Mills Wetzel #1H Heather Wetzel State: West Virginia Company: Stone Energy Corporation RMF @ Measured Temperature RMC @ Measured Temperature Source RMF RMC RM @ MRT RMF @ MRT Maximum Recorded Temperatures Circulation Stopped Time Logger On Bottom Time Unit Number Location Recorded By Witnessed By MUD Fluid Loss PH Source Of Sample RM @ Measured Temperature Density Viscosity Logging Date Run Number Depth Driller Schlumberger Depth Bottom Log Interval Top Log Interval Casing Driller Size @ Depth Casing Schlumberger Bit Size Type Fluid In Hole Run 1 Run 2 Run @ @ @ @ @ @
3 Run 4 @ @ @ @ @ @ DEPTH SUMMARY LISTING Date Created: 31 AUG 21 3:48:51 Depth System Equipment Depth Measuring Device Type: IDW B Serial Number: 2844 Calibration Date: 3 MAR 21 Calibrator Serial Number: 33 Calibration Cable Type: 7 39P LXS Wheel Correction 1: 1 Wheel Correction 2: 9 Tension Device Logging Cable Type: CMTD B/A Type: 7 39P LXS Serial Number: 1883 Serial Number: 78271 Calibration Date: 11 AUG 21 Length: 157 FT Calibrator Serial Number: 78796 Conveyance Method: Wireline Number of Calibration Points: 1 Rig Type: LAND Calibration RMS: 14 Calibration Peak Error: 26 Depth Control Parameters Log Sequence: Rig Up Length At Surface: Rig Up Length At Bottom: Rig Up Length Correction: Stretch Correction: Tool Zero Check At Surface: First Log In the Well 176.2 FT 176.2 FT. FT. FT 33.1 FT 1. ALL SCHLUMBERGER DEPTH CONTROL POLICIES FOLLOWED 2. IDW IS PRIMARY DEPTH CONTROL 3. Z CHART IS SECONDARY DEPTH CONTROL 4. 5. 6. Depth Control Remarks DISCLAIMER THE USE OF AND RELIANCE UPON THIS RECORDED DATA BY THE HEREIN NAMED COMPANY (AND ANY OF ITS AFFILIATES, PARTNERS, REPRESENTATIVES, AGENTS, CONSULTANTS AND EMPLOYEES) IS SUBJECT TO THE TERMS AND CONDITIONS AGREED UPON BETWEEN SCHLUMBERGER AND THE COMPANY, INCLUDING: (a) RESTRICTIONS ON USE OF THE RECORDED DATA; (b) DISCLAIMERS AND WAIVERS OF WARRANTIES AND REPRESENTATIONS REGARDING COMPANY S USE OF AND RELIANCE UPON THE RECORDED DATA; AND (c) CUSTOMER S FULL AND SOLE RESPONSIBILITY FOR ANY INFERENCE DRAWN OR DECISION MADE IN CONNECTION WITH THE USE OF THIS RECORDED DATA. OTHER SERVICES1 OTHER SERVICES2 OS1: TLD OS1: OS2: CNTG OS2: OS3: TEMP/AUDIO OS3: OS4: ECS OS4: OS5: OS5: REMARKS: RUN NUMBER 1 REMARKS: RUN NUMBER 2 PRESENTATION AS PER CLIENT REQUEST TOOLS RUN AS PER TOOL SKETCH SCHLUMBERGER FIRST RUN DEPTH CONTROL POLICY FOLLOWED MATRIX = LIMESTONE MATRIX DENSITY = 2.68 g/cc
THANK YOU FOR CHOOSING SCHLUMBERGER WIRELINE! YOUR CREW TODAY: J. MOORE AND J. BUSH RUN 1 RUN 2 SERVICE ORDER #: BEUA 14 SERVICE ORDER #: PROGRAM VERSION: 17C 154 PROGRAM VERSION: FLUID LEVEL: FLUID LEVEL: LOGGED INTERVAL START STOP LOGGED INTERVAL START STOP GSR U/Y WITM (DTS) A EQUIPMENT DESCRIPTION RUN 1 RUN 2 SURFACE EQUIPMENT CNB AB NCT B NCS VB GSR U/Y SURFACE EQUIPMENT WITM (DTS) A DOWNHOLE EQUIPMENT DOWNHOLE EQUIPMENT LEH QT LEH QT 36.2 LEH QT LEH QT 42.2 DTC H ECH KC 6371 DTCH A 8461 DTCH1 A SGT N SGH K SGC TB SGD TAB CTEM TelStatus ToolStatu Gamma Ray 32.3 3.2 29.3 33.2 3.2 DTC H ECH KC 6371 DTCH A 8461 DTCH1 A SGT N SGH K SGC TB SGD TAB CTEM TelStatus ToolStatu Gamma Ray 38.4 36.3 35.4 39.3 36.3 AGDT2 AA AGDT2 AA 25 AGDT2 Tem AGDT2 Aud 24.3 24.1 24.7 DTA A ECH KE 8226 DTA A 8226 3.8 AGDT AA AGDT AA 26 AGDT Temp AGDT Audi 19.9 19.7 2.4 CNT G CND NA NLS KL NSR F 3116 CNC GA 5 CNH G 468 BOW SPR NPV N 26.8 CFTC CNTC 2.2 19.7 CNEC CFEC 18.5 18. AIT M 16.
AMIS A 275 AMRM A 275 1.5 IN Standoff Induction Temperatu Power Sup 7.9 1.5 IN Standoff HILTH FTB HTBCD H 3779 HMCA H HRCC H 4317 HRMS H 489 HRGD H 4882 GLS VJ 543 MCFL Device H HILT Nucl. LS H 13 HILT Nucl. SS H 42137 HILT Nucl. BS H 4117 HMCA HRCC cart 12.7 8.7 14.7 MCFL HILT cali HRDD LS HRDD SS HRDD BS 3.3 2.8 2.4 SP SENSOR DF Mud Resis HV Tension TOOL ZERO.1. BNS CCS HMAS HV DF Tension HTEN TOOL ZERO..5 MAXIMUM STRING DIAMETER 6.88 IN MEASUREMENTS RELATIVE TO TOOL ZERO ALL LENGTHS IN FEET MAXIMUM STRING DIAMETER 4.63 IN MEASUREMENTS RELATIVE TO TOOL ZERO ALL LENGTHS IN FEET MAIN PASS 2 INCHES = 1 FEET MAXIS Field Log Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5:57 7358. FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5:58 7358. FT 19.5 FT Integrated Hole/Cement Volume Summary Hole Volume = 1975.57 F3 Cement Volume = 1219.29 F3 (assuming 5.5 IN casing O.D.) Computed from 7346. FT to 2762. FT using data channel(s) HCAL OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3
Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 GR > 2 From LHT1 to GR1 Tension (TENS) 1 (LBF) HILT Caliper (HCAL) 6 (IN) 16 Gamma Ray (GR) (GAPI) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 1 2 3 4
5 6 7 8 9 1
11 12 13 14 15
16 17 18 19 2 21
22 23 24 25 26
27 CSG 28 TENS 29 HCAL GR 3 AT9 AT6 31 32
33 34 35 36 TENS 37 HCAL GR
38 AT9 AT6 39 4 41 42 43
TENS HCAL 44 AT9 AT6 45 46 47 48
49 TENS HCAL 5 AT9 AT6 51 52 53 54
55 56 57 TENS HCAL 58 GR AT9 AT6 59
6 61 62 63 64 TENS HCAL 65
AT9 AT6 66 67 68 69 7
71 72 73 TD Gamma Ray (GR) (GAPI) 2 HILT Caliper (HCAL) 6 (IN) 16 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 Tension (TENS) 1 (LBF) GR > 2 From LHT1 to GR1 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 Parameters DLIS Name Description Value AIT M: Array Induction Tool M ABHM Array Induction Borehole Correction Mode 2_ComputeStandoff ABHV Array Induction Borehole Correction Code Version Number 9 ABLM Array Induction Basic Logs Mode 6_One_Two_and_Four ABLV Array Induction Basic Logs Code Version Number 223 ACDE Array Induction Casing Detection Enable No ACEN Array Induction Tool Centering Flag (in Borehole) Eccentered ACSED Array Induction Casing Shoe Estimated Depth 5 FT AETP Array Induction Enable Sonde Error Temp&Pres Corr Yes AFRSV Array Induction Response Set Version for Four ft Resolution 41.7.24.2 AIGS Array Induction Select Akima Interpolation Gating On
AMRF AORSV Array Induction Mud Resistivity Factor Array Induction Response Set Version for One ft Resolution 1 41.7.24.2 ARFV Array Induction Radial Profiling Code Version Number 71 ARPV Array Induction Radial Parametrization Code Version Number 232 ASTA Array Induction Tool Standoff 1.5 IN ATRSV Array Induction Response Set Version for Two ft Resolution 41.7.24.2 ATSE Array Induction Temperature Selection(Sonde Error Correction) Internal AULV Array Induction User Level Control Normal AZRSV Array Induction Response Set Version for Z Resolution.1.25. BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HILTH FTB: High resolution Integrated Logging Tool DTS BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF CNT G: Compensated Neutron G BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF SGT N: Scintillation Gamma Ray Tool N BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HOLEV: Integrated Hole/Cement Volume BHT Bottom Hole Temperature (used in calculations) 125 DEGF FCD Future Casing (Outer) Diameter 5.5 IN GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE HVCS Integrated Hole Volume Caliper Selection AUTOMATIC SHT Surface Hole Temperature 8 DEGF System and Miscellaneous BS Bit Size 8.75 IN DFD Drilling Fluid Density. LB/G DO Depth Offset for Playback. FT FLEV Fluid Level 5. FT MST Mud Sample Temperature 5. DEGF PP Playback Processing RECOMPUTE TD Total Depth 7346 FT Format: AIT_MAIN_2 Vertical Scale: 2" per 1 Graphics File Created: 31 Aug 21 5:58 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5:57 7358. FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5:58
MAIN PASS 5 INCHES = 1 FEET MAXIS Field Log Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5:57 7358. FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5:58 7358. FT 19.5 FT Integrated Hole/Cement Volume Summary Hole Volume = 1975.57 F3 Cement Volume = 1219.29 F3 (assuming 5.5 IN casing O.D.) Computed from 7346. FT to 2762. FT using data channel(s) HCAL OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 GR > 2 From LHT1 to GR1 Tension (TENS) 1 (LBF) PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 HILT Caliper (HCAL) 6 (IN) 16 Gamma Ray (GR) (GAPI) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 AIT 6 Inch Investigation (AT6).2 (OHMM) 2
1 2
3 4 5
6 7
8 9
1 11
12 13
14 15 16
17 18
19 2
21 22
23 24
25 26 27
CSG 28 29
TENS 3 HCAL GR AT9 AT6 31
32 33
34 35
36 37 TENS 38
HCAL GR AT9 AT6 39 4
41 42
43 44 TENS HCAL
AT9 AT6 45 46
47 48 49
5 TENS HCAL GR 51 AT9 AT6
52 53
54 55
56 57
58 TENS HCAL GR 59 AT9 AT6 6
61 62
63 64
65 TENS HCAL 66 AT9 AT6
67 68
69 7 71
72 73 < FR GR
FR RES > TD Gamma Ray (GR) (GAPI) 2 HILT Caliper (HCAL) 6 (IN) 16 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 Tension (TENS) 1 (LBF) GR > 2 From LHT1 to GR1 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 Parameters DLIS Name Description Value AIT M: Array Induction Tool M ABHM Array Induction Borehole Correction Mode 2_ComputeStandoff ABHV Array Induction Borehole Correction Code Version Number 9 ABLM Array Induction Basic Logs Mode 6_One_Two_and_Four ABLV Array Induction Basic Logs Code Version Number 223 ACDE Array Induction Casing Detection Enable No ACEN Array Induction Tool Centering Flag (in Borehole) Eccentered ACSED Array Induction Casing Shoe Estimated Depth 5 FT AETP Array Induction Enable Sonde Error Temp&Pres Corr Yes AFRSV Array Induction Response Set Version for Four ft Resolution 41.7.24.2 AIGS Array Induction Select Akima Interpolation Gating On AMRF Array Induction Mud Resistivity Factor 1 AORSV Array Induction Response Set Version for One ft Resolution 41.7.24.2 ARFV Array Induction Radial Profiling Code Version Number 71 ARPV Array Induction Radial Parametrization Code Version Number 232 ASTA Array Induction Tool Standoff 1.5 IN ATRSV Array Induction Response Set Version for Two ft Resolution 41.7.24.2 ATSE Array Induction Temperature Selection(Sonde Error Correction) Internal AULV Array Induction User Level Control Normal AZRSV Array Induction Response Set Version for Z Resolution.1.25. BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HILTH FTB: High resolution Integrated Logging Tool DTS BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF CNT G: Compensated Neutron G BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE
SHT Surface Hole Temperature 8 DEGF SGT N: Scintillation Gamma Ray Tool N BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HOLEV: Integrated Hole/Cement Volume BHT Bottom Hole Temperature (used in calculations) 125 DEGF FCD Future Casing (Outer) Diameter 5.5 IN GCSE Generalized Caliper Selection BS GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE HVCS Integrated Hole Volume Caliper Selection AUTOMATIC SHT Surface Hole Temperature 8 DEGF System and Miscellaneous BS Bit Size 8.75 IN DFD Drilling Fluid Density. LB/G DO Depth Offset for Playback. FT FLEV Fluid Level 5. FT MST Mud Sample Temperature 5. DEGF PP Playback Processing RECOMPUTE TD Total Depth 7346 FT Format: AIT_MAIN_5 Vertical Scale: 5" per 1 Graphics File Created: 31 Aug 21 5:58 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 Input DLIS Files DEFAULT MERGE_AIT_AGDT_TLD_2GUP FN:1 PRODUCER 31 Aug 21 5:57 7358. FT 19. FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_21PUP FN:17 PRODUCER 31 Aug 21 5:58 REPEAT PASS 5 INCHES = 1 FEET MAXIS Field Log Input DLIS Files DEFAULT MERGE_AIT_AGDT_14 FN:1 PRODUCER 31 Aug 21 5:46 736.5 FT 786.5 FT Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_18PUP FN:15 PRODUCER 31 Aug 21 5:51 736.5 FT 787. FT Integrated Hole/Cement Volume Summary Hole Volume = 126.74 F3 Cement Volume = 84.1 F3 (assuming 5.5 IN casing O.D.) Computed from 7346. FT to 787.5 FT using data channel(s) HCAL
OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 GR > 2 From LHT1 to GR1 Tension (TENS) 1 (LBF) PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 HILT Caliper (HCAL) 6 (IN) 16 Gamma Ray (GR) (GAPI) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 71 72
73 TD Gamma Ray (GR) (GAPI) 2 HILT Caliper (HCAL) 6 (IN) 16 AIT 6 Inch Investigation (AT6).2 (OHMM) 2 AIT 9 Inch Investigation (AT9).2 (OHMM) 2 Tension (TENS) 1 (LBF) GR > 2 From LHT1 to GR1 PIP SUMMARY Integrated Hole Volume Minor Pip Every 1 F3 Integrated Hole Volume Major Pip Every 1 F3 Integrated Cement Volume Minor Pip Every 1 F3 Integrated Cement Volume Major Pip Every 1 F3 Parameters DLIS Name Description Value AIT M: Array Induction Tool M ABHM Array Induction Borehole Correction Mode 2_ComputeStandoff ABHV Array Induction Borehole Correction Code Version Number 9 ABLM Array Induction Basic Logs Mode 6_One_Two_and_Four ABLV Array Induction Basic Logs Code Version Number 223
ACDE ACEN Array Induction Casing Detection Enable Array Induction Tool Centering Flag (in Borehole) No Eccentered ACSED Array Induction Casing Shoe Estimated Depth 5 FT AETP Array Induction Enable Sonde Error Temp&Pres Corr Yes AFRSV Array Induction Response Set Version for Four ft Resolution 41.7.24.2 AIGS Array Induction Select Akima Interpolation Gating On AMRF Array Induction Mud Resistivity Factor 1 AORSV Array Induction Response Set Version for One ft Resolution 41.7.24.2 ARFV Array Induction Radial Profiling Code Version Number 71 ARPV Array Induction Radial Parametrization Code Version Number 232 ASTA Array Induction Tool Standoff 1.5 IN ATRSV Array Induction Response Set Version for Two ft Resolution 41.7.24.2 ATSE Array Induction Temperature Selection(Sonde Error Correction) Internal AULV Array Induction User Level Control Normal AZRSV Array Induction Response Set Version for Z Resolution.1.25. BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HILTH FTB: High resolution Integrated Logging Tool DTS BHT Bottom Hole Temperature (used in calculations) 125 DEGF FEXP Form Factor Exponent 2 FNUM Form Factor Numerator 1 GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF CNT G: Compensated Neutron G BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF SGT N: Scintillation Gamma Ray Tool N BHT Bottom Hole Temperature (used in calculations) 125 DEGF GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE SHT Surface Hole Temperature 8 DEGF HOLEV: Integrated Hole/Cement Volume BHT Bottom Hole Temperature (used in calculations) 125 DEGF FCD Future Casing (Outer) Diameter 5.5 IN GCSE Generalized Caliper Selection HCAL GDEV Average Angular Deviation of Borehole from Normal DEG GGRD Geothermal Gradient.1 DF/F GRSE Generalized Mud Resistivity Selection CHART_GEN_9 GTSE Generalized Temperature Selection LINEAR_ESTIMATE HVCS Integrated Hole Volume Caliper Selection AUTOMATIC SHT Surface Hole Temperature 8 DEGF System and Miscellaneous BS Bit Size 8.75 IN DFD Drilling Fluid Density. LB/G DO Depth Offset for Playback. FT FLEV Fluid Level 5. FT MST Mud Sample Temperature 5. DEGF PP Playback Processing RECOMPUTE TD Total Depth 7346 FT Format: AIT_REPEAT Vertical Scale: 5" per 1 Graphics File Created: 31 Aug 21 5:51 OP System Version: 17C 154 AIT M 17C 154 HILTH FTB 17C 154 CNT G SPC 3867 NUCL DTA A SKK 3882 EDTCB AGDT AA 17C 154 AGDT2 AA 17C 154 SGT N 17C 154 DTC H 17C 154 Input DLIS Files DEFAULT MERGE_AIT_AGDT_14 FN:1 PRODUCER 31 Aug 21 5:46 736.5 FT 786.5 FT
Output DLIS Files DEFAULT AIT_TLD_MCFL_CNL_18PUP FN:15 PRODUCER 31 Aug 21 5:51 CALIBRATIONS MAXIS Field Log Calibration and Check Summary Measurement Nominal Master Before After Change Limit Units Array Induction Tool M Wellsite Calibration Electronics Calibration Check Thru Cal Mag. & Phase Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4 Thru Cal Magnitude.6163.6165 N/A N/A N/A V Thru Cal Magnitude 1 1.263 1.263 N/A N/A N/A V Thru Cal Magnitude 2.6268.6268 N/A N/A N/A V Thru Cal Magnitude 3.771.771 N/A N/A N/A V Thru Cal Magnitude 4 1.324 1.324 N/A N/A N/A V Thru Cal Magnitude 5 1.926 1.927 N/A N/A N/A V Thru Cal Magnitude 6 1.925 1.925 N/A N/A N/A V Thru Cal Magnitude 7 1.386 1.387 N/A N/A N/A V Thru Cal Phase 189.3 189.3 N/A N/A N/A DEG Thru Cal Phase 1 188.2 188.2 N/A N/A N/A DEG Thru Cal Phase 2 184.7 184.6 N/A N/A N/A DEG Thru Cal Phase 3 183.9 183.9 N/A N/A N/A DEG Thru Cal Phase 4 177.7 177.7 N/A N/A N/A DEG Thru Cal Phase 5 176.1 176.1 N/A N/A N/A DEG Thru Cal Phase 6 176.1 176.1 N/A N/A N/A DEG Thru Cal Phase 7 175.4 175.3 N/A N/A N/A DEG Array Induction Tool M Wellsite Calibration Electronics Calibration Check Auxiliary Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4 Array Induction SPA Plus 991. 986.2 986.5 N/A N/A N/A MV Array Induction SPA Zero.1595.1361 N/A N/A N/A MV Array Induction Temperature Pl.917.9135.9138 N/A N/A N/A V Array Induction Temperature Ze.162.1281 N/A N/A N/A V Array Induction Tool M Wellsite Calibration Test Loop Gain Correction Master: Calibration out of date 28 Nov 29 22:22 Test Loop Gain Correctio 1.12 N/A N/A N/A N/A V Test Loop Gain Correctio 1 1.14 N/A N/A N/A N/A V Test Loop Gain Correctio 2 1.17 N/A N/A N/A N/A V Test Loop Gain Correctio 3 1.1 N/A N/A N/A N/A V Test Loop Gain Correctio 4.9939 N/A N/A N/A N/A V Test Loop Gain Correctio 5.9845 N/A N/A N/A N/A V Test Loop Gain Correctio 6.9949 N/A N/A N/A N/A V Test Loop Gain Correctio 7 1.9 N/A N/A N/A N/A V Test Loop Gain Correctio.712 N/A N/A N/A N/A DEG Test Loop Gain Correctio 1.6469 N/A N/A N/A N/A DEG Test Loop Gain Correctio 2.738 N/A N/A N/A N/A DEG Test Loop Gain Correctio 3.2158 N/A N/A N/A N/A DEG Test Loop Gain Correctio 4.1363 N/A N/A N/A N/A DEG Test Loop Gain Correctio 5.1396 N/A N/A N/A N/A DEG Test Loop Gain Correctio 6.4281 N/A N/A N/A N/A DEG Test Loop Gain Correctio 7.1689 N/A N/A N/A N/A DEG Array Induction Tool M Wellsite Calibration Sonde Error Correction Master: Calibration out of date 28 Nov 29 22:22 R Sonde Error Correction 75.39 N/A N/A N/A N/A MM/M R Sonde Error Correction 1 16.2 N/A N/A N/A N/A MM/M R Sonde Error Correction 2 18.5 N/A N/A N/A N/A MM/M R Sonde Error Correction 3 59.63 N/A N/A N/A N/A MM/M R Sonde Error Correction 4 27.89 N/A N/A N/A N/A MM/M
R Sonde Error Correction 5 14.12 N/A N/A N/A N/A MM/M R Sonde Error Correction 6 9.775 N/A N/A N/A N/A MM/M R Sonde Error Correction 7 1.953 N/A N/A N/A N/A MM/M X Sonde Error Correction 262.2 N/A N/A N/A N/A MM/M X Sonde Error Correction 1 37.53 N/A N/A N/A N/A MM/M X Sonde Error Correction 2 14.9 N/A N/A N/A N/A MM/M X Sonde Error Correction 3 56.89 N/A N/A N/A N/A MM/M X Sonde Error Correction 4.5164 N/A N/A N/A N/A MM/M X Sonde Error Correction 5 9.634 N/A N/A N/A N/A MM/M X Sonde Error Correction 6 4.25 N/A N/A N/A N/A MM/M X Sonde Error Correction 7 9.392 N/A N/A N/A N/A MM/M Array Induction Tool M Wellsite Calibration Mud Gain Correction Master: Calibration out of date 28 Nov 29 22:22 Coarse Mag, Real, Imag 1.112 N/A N/A N/A N/A Coarse Mag, Real, Imag 1 1.112 N/A N/A N/A N/A Coarse Mag, Real, Imag 2 1.112 N/A N/A N/A N/A Fine Mag, Real, Imag 1.113 N/A N/A N/A N/A Fine Mag, Real, Imag 1 1.113 N/A N/A N/A N/A Fine Mag, Real, Imag 2 1.113 N/A N/A N/A N/A Scintillation Gamma Ray Tool N Wellsite Calibration Detector Calibration Before: 29 Aug 21 12:38 Gamma Ray (Jig Bkg) 154.8 N/A 154.8 N/A N/A 14.8 GAPI Gamma Ray (Calibrated) 165. N/A 165. N/A N/A 15. GAPI Array Induction Tool M / Equipment Identification Primary Equipment: Rm/SP Bottom Nose AMRM A 275 Array Induction Sonde AMIS A 275 Auxiliary Equipment: Array Induction Tool M Wellsite Calibration Electronics Calibration Check Thru Cal Mag. & Phase Idx Phase Value Thru Cal Magnitude V Nominal Value Thru Cal Phase DEG Nominal Master Before.6163.6165.61 189.3 189.3 197. 1 Master Before 1.263 1.263 1.27 188.2 188.2 196. 2 Master Before.6268.6268.62 184.7 184.6 192. 3 Master Before.771.771.7 183.9 183.9 191. 4 Master Before 1.324 1.324 1.34 177.7 177.7 185. 5 Master Before 1.926 1.927 1.96 176.1 176.1 182. 6 Master Before 1.925 1.925 1.96 176.1 176.1 181. 7 Master Before 1.386 1.387 1.41 175.4 175.3 175. 6. % 14. % Nom 6. Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4 Nom + 6. Phase Array Induction Tool M Wellsite Calibration Electronics Calibration Check Auxiliary Array Induction SPA Plus MV Value Phase Array Induction SPA Zero MV Value Master 986.2 Master.1595
Before 986.5 Before.1361 941. 991. Phase Array Induction Temperature Plus V 14 Value 5. Phase Array Induction Temperature Zero V 5. Value Master.9135 Master.162 Before.9138 Before.1281.871.917.963.5 Master: Calibration out of date 28 Nov 29 22:22 Before: 29 Aug 21 12:4.5 Idx Value 1.12 Array Induction Tool M Wellsite Calibration Test Loop Gain Correction Test Loop Gain Correction Magnitude V Value Test Loop Gain Correction Phase DEG.712.95 1. 1.5 3. 3. 1 1.14.6469.95 1. 1.5 3. 3. 2 1.17.738.95 1. 1.5 3. 3. 3 1.1.2158.95 1. 1.5 3. 3. 4.9939.1363.95 1. 1.5 3. 3. 5.9845.1396.95 1. 1.5 3. 3. 6.9949.4281.95 1. 1.5 3. 3. 7 1.9.1689.95 1. 1.5 3. 3. Master: Calibration out of date 28 Nov 29 22:22 Idx Value 75.39 Array Induction Tool M Wellsite Calibration Sonde Error Correction R Sonde Error Correction MM/M Value X Sonde Error Correction MM/M 262.2 231. 56. 119. 225 225 1 16.2 37.53 114. 159. 24. 625. 625. 2 18.5 14.9 66. 111. 156. 35. 35. 3 59.63 56.89 39. 64. 89.3 25. 25. 4 27.89.5164 15. 25. 35. 63. 63. 5 14.12 9.634 4. 14. 24. 5. 5. 6 9.775 4.25 5. 1. 15. 3. 3. 7 1.953 9.392
5. Master: Calibration out of date 28 Nov 29 22:22 5. 3. 3. Array Induction Tool M Wellsite Calibration Mud Gain Correction Idx Value Coarse Mag, Real, Imag Value Fine Mag, Real, Imag 1.112 1.113.8 1. 1.2.8 1. 1.2 1 1.112 1.113.8 1. 1.2.8 1. 1.2 2 1.112 1.113.8 1. 1.2.8 1. 1.2 Master: Calibration out of date 28 Nov 29 22:22 Array Induction Tool M Master Calibration Electronics Calibration Check Thru Cal Mag. & Phase Idx Phase Value Thru Cal Magnitude V Nominal Value Thru Cal Phase DEG Nominal Master.6163.61 189.3 197. 1 Master 1.263 1.27 188.2 196. 2 Master.6268.62 184.7 192. 3 Master.771.7 183.9 191. 4 Master 1.324 1.34 177.7 185. 5 Master 1.926 1.96 176.1 182. 6 Master 1.925 1.96 176.1 181. 7 Master 1.386 1.41 175.4 175. 6. % 14. % Nom 6. Nom + 6. Master: Calibration out of date 28 Nov 29 22:22 Phase Array Induction Tool M Master Calibration Electronics Calibration Check Auxiliary Array Induction SPA Plus MV Value Phase Array Induction SPA Zero MV Value Master 986.2 Master.1595 941. 991. Phase Array Induction Temperature Plus V 14 Value 5. Phase Array Induction Temperature Zero V 5. Value Master.9135 Master.162.871.917.963.5.5 Master: Calibration out of date 28 Nov 29 22:22 Idx Value 1.12 Array Induction Tool M Master Calibration Test Loop Gain Correction Test Loop Gain Correction Magnitude V Value Test Loop Gain Correction Phase DEG.712.95 1. 1.5 3. 3. 1 1.14.6469.95 1. 1.5 3. 3. 2 1.17.738.95 1. 1.5 3. 3. 3 1.1.2158.95 1. 1.5 3. 3. 4.9939.1363.95 1. 1.5 3. 3.
5.9845.1396.95 1. 1.5 3. 3. 6.9949.4281.95 1. 1.5 3. 3. 7 1.9.1689.95 1. 1.5 3. 3. Master: Calibration out of date 28 Nov 29 22:22 Idx Value 75.39 Array Induction Tool M Master Calibration Sonde Error Correction R Sonde Error Correction MM/M Value X Sonde Error Correction MM/M 262.2 231. 56. 119. 225 225 1 16.2 37.53 114. 159. 24. 625. 625. 2 18.5 14.9 66. 111. 156. 35. 35. 3 59.63 56.89 39. 64. 89.3 25. 25. 4 27.89.5164 15. 25. 35. 63. 63. 5 14.12 9.634 4. 14. 24. 5. 5. 6 9.775 4.25 5. 1. 15. 3. 3. 7 1.953 9.392 5. 5. 3. 3. Master: Calibration out of date 28 Nov 29 22:22 Array Induction Tool M Master Calibration Mud Gain Correction Idx Value Coarse Mag, Real, Imag Value Fine Mag, Real, Imag 1.112 1.113.8 1. 1.2.8 1. 1.2 1 1.112 1.113.8 1. 1.2.8 1. 1.2 2 1.112 1.113.8 1. 1.2.8 1. 1.2 Master: Calibration out of date 28 Nov 29 22:22 Scintillation Gamma Ray Tool N / Equipment Identification Primary Equipment: Scintillation Gamma Cartridge Scintillation Gamma Detector Auxiliary Equipment: Scintillation Gamma Housing Gamma Source Radioactive SGC TB SGD TAB SGH K GSR U/Y Scintillation Gamma Ray Tool N Wellsite Calibration
Phase Gamma Ray Background GAPI Value Phase Before 3.64 Before Detector Calibration Gamma Ray (Jig Bkg) GAPI Value Phase Gamma Ray (Calibrated) GAPI Value 154.8 Before 165. 3. 12. 14.8 154.8 168.9 15. 165. 18. Before: 29 Aug 21 12:38 DTS Telemetry Tool / Equipment Identification Primary Equipment: DTC H Auxiliary Cartridge DTCH A DTC H Telemetry Cartridge DTCH A 8461 Auxiliary Equipment: DTCH Telemetry Cartridge Housing ECH KC 6371 Company: Well: Field: County: State: Stone Energy Corporation Mills Wetzel #1H Heather Wetzel West Virginia PLATFORM EXPRESS ARRAY INDUCTION GAMMA RAY / CALIPER