TW737book_E_fin.indd /11/09 13:12

TW737book_E_fin.indd 1 2016/11/09 13:12

Designed for the serious golfer, the TOU WOLD allow players of different levels to experience tour quality products The change between the TW717 & TW727 was the evolution of models in the same product lineup. The NEW TW737 has been re-examined, carefully selected and highly evaluated by professional golfers. DIVE - Out of the huge quantities of past TOU WOLD products and prototypes, the models in which professional golfers gave high evaluations and were carefully selected for this evolution. As a result, four variations were selected with differences in profile and center of gravity. ION - Based on the models in which professional golfers gave specially high evaluations among the past models, the head profile and the overall body shape were enhanced. We created three models of the V eries that satisfy the professional and serious golfers and the P model (pocket cavity) is the forgiving model of the series. HAFT - The shafts were produced having variations in profile, but were similar by utilizing TOAYCA T1100G graphite and the special rigidity adjustment method. TOAYCA is the registered trademark of Toray Industries, Inc. hared Development Technology Professionals and erious Golfers Created by uniting HONMA s TIPLE POWE In response to the needs of better golfers and using the know-how gained through prototype models, we are Capable of creating a great variation of clubs Because there are many professional golfers at Honma, we have created many prototypes. The most highly rated models selected by our professionals have become the TW737 model line. 1 TW737book_E_fin.indd 2 2016/11/09 13:12

Customized Production Capability Customized for every golfer With the creation of a large variety of parts, we are Capable of creating the best custom club suited for an individual At the tournaments, our craftsmen spend an entire day assembling clubs for pros. Every craftsman is capable of making an entire club from start to finish, with efficiency and precision. By fully utilizing the skills of these craftsmen, we are capable of assembling clubs swiftly. Fitting Capability The most optimum club for every golfer With a great variation of clubs, we have the ability to Choose the most suitable club for every skilled golfer From the great variation of clubs, to choosing the right club for every professional golfer takes the HONMA professional support team and their fitting skills to provide the upmost service. Choosing the most suitable club for skilled golfers is just the same. 2 TW737book_E_fin.indd 3 2016/11/09 13:12

Four heads having obvious differences, with varying Centroid design Head design Face structure Low spin and trajectory ensured by a shallow center of gravity design. A wide-face model to hit the ball without fearing a pulled shot. <Oval Pear haped> The traditional shape and mid center of gravity design that traditionalists love. A model that ensures carry distance and maneuverability. <Orthodox haped> A model with superb directional stability that gives assistance by featuring a deep center of gravity and a high MOI. <emi Pear haped> High trajectory and low spin are ensured by ultra-shallow and low center of gravity. A model for long carry distances and a high MOI. <Large haped> Depth to center of gravity: hallow Depth to center of gravity: Mid Depth to center of gravity: Deep Depth to center of gravity: hallow Head volume: 457cm 3 Head volume: 450cm 3 Head volume: 456cm 3 Head volume: 460cm 3 High-back Form emi High-back Form lightly hallow hallow 6-4Titanium Forged cup face 6-4Titanium High-density cup face 6-4Titanium High-density cup face Ti5N olled Open face 3 TW737book_E_fin.indd 4 2016/11/09 13:12

Players can select from a variety of tour driven head shapes Large profile model that provides confidence and carry distance performance as demanded by better professional golfers. The TW737FWc provides flexibility and shot control from the tee and turf with a compact profile that delivers slightly lower launch. Large, confidence inspiring profile for golfers that need enhanced launch. light face progression for golfers that prefer a fairway metal look. Compact profile for launch and trajectory control for more distance. Head volume:184cm 3 (3W/15 ) Head volume:164cm 3 (3W) Head volume:128cm 3 Head volume:112cm 3 Depth to center of gravity: 30.0mm(3W/15 ) Depth to center of gravity: 27.0mm(3W) Depth to center of gravity: 27.5mm(U22) Depth to center of gravity: 26.5mm(U22c) 4 TW737book_E_fin.indd 5 2016/11/09 13:12

Designed to meet the needs of professional golfers, form and function play a key role in design of each model A modern, compact cavity blade for shot making and W-forged feel. W-forged cavity model that features carry distance and maneuverability with forgiveness. W-forged model that gave shape to excellent ease of taking an address position, mild ball striking feeling, and carry distance performance. Precision cast pocket cavity model that ensures high trajectory and overwhelming carry distance performance achieved by low center of gravity and strong loft design. #5 #7 #5 #7 #5 #7 #5 #7 #7 (34 ) #7 (32 ) #7 (30 ) #7 (30 ) Mild steel / Casting 5 TW737book_E_fin.indd 6 2016/11/09 13:13

Grain-Flow Forged Cup Face Conventional Manufacturing Method Fast ball release is the best feature New Manufacturing Method The 445 s cup face was designed to minimize golfers who have the tendency to hit their drives left. This technology may greatly benefit professional golfers who swing with an inside out swing path. By setting the grain flow in the vertical direction creates a high density and enhances rigidity. Grain Flow = Horizontal Grain Flow = Vertical High-Density Cup Face The feel of the ball catching by the club face is the best feature The 450 club face was designed for maneuverability, whereas the 4 is straight-line stability. The spin rate increased for both the 450 (2,163 rpm) and the 4 (2,241 rpm) compared to 445 (2,025 rpm). With the cup face the ball trajectory became more stable, had a more responsive feel and a comfortable hitting sound. The special high-density method is a multiple process. A two press process is added after hot-forming the face. It adds greater density to the metal texture of 6-4 titanium, thereby enhancing the rigidity of the material. 6-4 titanium board pecial high-denseness method Heated press forming Low density High density Body: 811 titanium Casting Face: 6-4 titanium Magnification 1000 New W-Forging Forging the soft-iron material (25C proprietary blend) that is specially formed enhances the strength. In particular, of the upper center part of the club face is where the grain flow is dense. This forging method has reduced the poor result of an off-center shot. 1 2 1 Previous model 4 3 TW737 2 3 4 6 TW737book_E_fin.indd 7 2016/11/09 13:13

DIVE FW When the butt section of shaft is thick, users often feel that the club is heavy and hard. Therefore, for the feel to remain unchanged even when the butt section is made thinner, a new carbon fiber material, TOAY- CA T1100G was introduced and the shaft was designed with HONMA s unique special rigidity adjustment method (Pat. Pend.). As a result, features of the A, C and Z series are emerged, while keeping the outer diameter at the butt section unchanged as much as possible. E-A The center section of the shaft and butt is firm and has a softer tip. We succeeded in making the grip portion thinner while retaining the features of past A-series shaft. The weight at the grip portion has been reduced, thereby ensuring a better feel at impact. E-C The mid high section of the shaft is firm with the butt and tip section softer. The ultimate C-series shaft is designed to the specifications of many professional golfers requesting the butt portion to be as thin as possible. E-Z The center section of the shaft and butt is softer with a firmer tip. An extremely persistent shaft where the feeling at the grip was created through a lot of tests by professional golfers. The characteristics of this shaft is to help the ball from going left and the strength to prevent poor performance of an off-center shot. UT ION / Lightweight Lightweight zone shaft in which the needs of females and golfers who need a lighter option. IN-U / IN This is a shaft that responds to the needs mainly to golfers who want to launch the ball high and take dead aim. By laminating the Nickel-Titanium alloy, a shape-memory alloy, at the leading end ensures the design will prevent poor performance of an off-center shot. UT ION / Heavyweight Heavyweight zone shaft contains amorphous metal fiber and is designed in consideration of the product flow of IB shafts and steel shafts for golfers who need a heavier shaft. IB-U / IB This is a highly maneuverable heavy weight shaft dedicated for utilities and irons where amorphous metal fiber is employed to respond to the strong requirements of professional golfers and better players who want to have the same feel. Patent applied for The IB tour professionals have wanted, characterized by tenaciousness By laminating the outermost layer of the shaft end with Amorphous metal fiber, an amorphous metal fiber characterized by its strength and toughness (tenacity), this iron, extra-weighted on the end, offers the strength of impact and excellent playability of a steel shaft, along with the ease of swing found in a carbon shaft. Amorphous metal fiber A strong, tough, heavy metal fiber developed by UNITIKA, Ltd., offering both strength and flexibility. TOAYCA is the registered trademark of Toray Industries, Inc. 7 TW737book_E_fin.indd 8 2016/11/09 13:13

E-A Flex Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point E-C Flex Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point 54.5 56.0 4.35 4.30 256 264 8.6/15.3 53.5.0 4.35 4.30 254 262 8.6/15.1 57.5 4.25 272 8.6/15.4 56.5 4.25 270 8.6/15.2 60.5 4.15 288 8.6/15.5 59.5 4.15 286 8.6/15.3 64.0 3.90 281 63.5 3.90 276.5 3.85 289 8.6/15.6 Mid.0 3.85 284 8.6/15.4 Mid 68.5 3. 305 8.6/15.7 68.0 3. 300 8.6/15.5 73.5 3.40 291 8.6/15.6 72.5 3.40 286 8.6/15.6 76.5 3.30 307 8.6/15.7.5 3.30 302 8.6/15.7 83.0 3.00 295 8.6/15.6 82.0 3.00 292 8.6/15.4 85 85 86.0 2.90 311 8.6/15.7 85.0 2.90 308 8.6/15.5 E-Z Flex Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point.5 57.0 4.30 4.25 253 261 8.6/15.1 58.5 4.20 269 8.6/15.2 61.5 4.10 285 8.6/15.3.5 3.85 2 67.0 3.80 283 8.6/15.5 High 70.0 3.70 299 8.6/15.6 74.5 3.35 285 8.6/15.7 77.5 3.25 301 8.6/15.8 84.0 2.95 291 8.6/15.4 85 87.0 2.85 307 8.6/15.5 IN-U Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point IN Flex Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point 54.0 3. 300 9.3/15.4 57.5 3.06 279 9.3/15.2 64.5 74.0 3.25 2.95 313 324 9.3/15.5 Mid 58.5 3.01 288 60.0 2.96 297 67.5 2.76 289 68.5 2.71 298 70.0 2.66 307 77.5 2.46 298 78.5 2.41 307 80.0 2.36 316 9.3/15.3 9.5/15.5 9.3/15.6 9.3/15.7 9.3/15.8 Mid IB-U Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point 85 84.0 2.70 335 9.3/15.5 95 105 93.5 103.0 2.40 2.10 348 348 9.3/15.6 High IB Flex Torque (deg.) Frequency (cpm) Butt diameter/tip diameter (mm) Kick-point 82.5 3.25 308 9.3/15.5 85 84.0 3.20 316 85.5 3.15 324 95 95.5 2.95 336 94.0 3.00 328 9.3/15.6 High 102.5 2.70 342 105 104.0 2. 350 *Please note that mean value measurement may differ from actual value measurement to some extent. *haft date is VIZAD E-A / E-C / E-Z (length 1,140 mm), VIZAD IN-U / IB-U (1,013 mm). *Data refers to the #5 (IN / IB). 8 TW737book_E_fin.indd 9 2016/11/09 13:13

Liang Wen Chong 9 TW737book_E_fin.indd 10 2016/11/09 13:13

High Velocity Low pin educes pulls = You can hit the ball HAD hape Center of Gravity Design Face The pear profile contains a thick wall at the center of the crown. The shape provides long carry and produces a major deflection of the crown. The shallow center of gravity design fits the inside out swing, which is often seen with professional golfers, provides the adequate launch and spin rate. The grain flow forged cup face produces the maximum initial launch speed in conjunction with the head deflection. (efer to page 6.) hallow center of gravity (8g weight) edistribution of weight from the thin crown A thin crown with a partial wall thickness of 0.6mm and 0.mm allows redistribution of surplus weight to the sole TW737 445 High-back Form 6-4Titanium Forged cup face Head volume (cm 3 ) 9.5 10.5 58.5 457 VIZAD E-A VIZAD E-C VIZAD E-Z ize:60 / Weight:50.0g Head cover (HC-1623):Made in Vietnam 10 TW737book_E_fin.indd 11 2016/11/09 13:13

Bo-Mee Lee 11 TW737book_E_fin.indd 12 2016/11/09 13:13

High Maneuverability Adequate pin ate Traditional hape hape Center of Gravity Design Face The semi high-back shape has been achieved irrespective of the deep face driver, and superb maneuverability and adequate spin rate have been achieved while ensuring the high and strong trajectory. It is designed to ensure excellent stability for a little shorter center of gravity distance and is a little shorter with the middle center of gravity. The high density cup face, featuring pleasant hitting sound and response, allows the the user to feel the ball caught on the face (efer to page 6.) Weight 8g edistribution of weight from the thin crown The thickness of the crown aimed at lightening with partial wall thickness of 0.6mm and 0.mm and distributed the surplus weight into the sole part TW737 450 6-4Titanium High-density cup face Head volume (cm 3 ) 9.5 10.5 58.5 450 VIZAD E-A VIZAD E-C VIZAD E-Z ize:60 / Weight:50.0g Head cover (HC-1623):Made in Vietnam 12 TW737book_E_fin.indd 13 2016/11/09 13:13

Hiroshi Iwata 13 TW737book_E_fin.indd 14 2016/11/09 13:13

High Trajectory High traight-line tability High Moment Of Inertia hape Center of Gravity Design Face A comparatively shallower head with thick wall makes the face look longer, thereby adding the sense of confidence at address. With a deep center of gravity, the 4 delivers a higher trajectory and longer distance. The high density cup face, featuring pleasant hitting sound and response, allows the user to feel the ball caught on the face (efer to page 6.) Weight 8g edistribution of weight from the thin crown The thin crown with partial wall thickness of 0.6mm and 0.mm transfers the extra weight to the sole TW737 4 6-4Titanium High-density cup face Head volume (cm 3 ) 9.5 10.5 58.5 456 VIZAD E-A VIZAD E-C VIZAD E-Z ize:60 / Weight:50.0g Head cover (HC-1623):Made in Vietnam 14 TW737book_E_fin.indd 15 2016/11/09 13:14

han-shan Feng 15 TW737book_E_fin.indd 16 2016/11/09 13:14

High Trajectory Low pin ate Easy-to-use head with priority given to carry distance hape Center of Gravity Design Face The shape that makes it easy to hit the ball for the shallow center of gravity design with large-sized shallow back. Priority is given to carry distance with the shallow center of gravity. The face uses rolled 5N titanium, which is a high-strength material and features rapid ball release. edistribution of weight from the thin crown hallow center of gravity 8g TW737 460 hallow Ti5N olled Open face Head volume (cm 3 ) 9.5 10.5 59.0 460 VIZAD E-A VIZAD E-C VIZAD E-Z ize:60 / Weight:50.0g Head cover (HC-1623):Made in Vietnam 16 TW737book_E_fin.indd 17 2016/11/09 13:14

o Yeon yu 17 TW737book_E_fin.indd 18 2016/11/09 13:14

Fairway woods, unlike drivers and irons, the player could not choose clubs that fit his or her swing in the past. Now, you can choose models that fit your swing where the line of drivers is incorporated. FW FWc A larger profile model that provides confidence and carry distance performance as demanded by professional golfers. For the 3W, the head designs in response to a professional demand to want to increase a projection area wider. The TW737FWc provides flexibility and shot control from the tee and turf with a compact profile that delivers slightly lower launch. Head size comparison: FW Width 82.5mm FWc Width 76.0mm hallow Forward center of gravity 10.5g FWc FW FW 3W/15 Head volume: 184cm 3 Depth to center of gravity: 30.0mm FW FWc Load Position TW737 FW / FWc FWc 3W/15 Head volume: 164cm 3 Depth to center of gravity: 27.0mm Head volume (cm 3 ) FW 3W/13 3W/15 58.0 183 184 5W/18 58.5 162 3W/15 57.5 164 FWc 5W/18 58.0 150 7W/21 58.5 135 VIZAD E-A VIZAD E-C VIZAD E-Z ize:60 / Weight:50.0g Head cover (HE-1624):Made in Vietnam 18 TW737book_E_fin.indd 19 2016/11/09 13:14

19 TW737book_E_fin.indd 20 2016/11/09 13:14

For UT clubs, unlike drivers and irons, the user could not choose clubs that fit his or her swing in the past. Now, you can choose models that fit your swing where the line of drivers is incorporated. UT UTc Large, confidence inspiring profile for golfers that need enhanced launch. light face progression for golfers that prefer a fairway metal look. Compact profile for launch and trajectory control for more distance. light offset for more aggressive players that engage the turf. Head size comparison: UT Width 60.5mm UTc Width 50.5mm Optimal center of gravity by UT load positioning UT U22/22 Head volume: 128cm 3 Depth to center of gravity: 27.5mm UTc UT UT UTc TW737 UT / UTc UTc U22c/22 Head volume: 112cm 3 Depth to center of gravity: 26.5mm Head volume (cm 3 ) UT UTc U19/19 U22/22 58.5 128 U25/25 U16c/16 U19c/19 57.5 112 U22c/22 VIZAD INU VIZAD IB85U N..PO 950GH ize:60 / Weight:50.0g Juvic Pagunsan Head cover (HE-1625):Made in Vietnam 28 20 TW737book_E_fin.indd 21 2016/11/09 13:14

Hiroshi Iwata 21 TW737book_E_fin.indd 22 2016/11/09 13:14

New W-Forging Center of gravity/shape design according to club-head loft without changing the face progression. Unique club-head loft setup without changing the face progression. #7 #7 #7 34 32 30 3.7mm 3.2mm 3.1mm # (No.) 3 21.0 59.5 4 24.0 60.0 5 27.0 60.5 6 30.0 61.0 7 34.0 61.5 8 38.0 62.0 9 42.0 62.5 10 46.0 63.0 TW737 Vn / V / Vs # (No.) 3 20.0 59.5 4 22.0 60.0 5 25.0 60.5 6 28.0 61.0 7 32.0 61.5 8 36.0 62.0 9 41.0 62.5 10 46.0 63.0 # (No.) 3 19.0 59.5 4 21.0 60.0 5 24.0 60.5 6 27.0 61.0 7 30.0 61.5 8 34.0 62.0 9 38.0 62.5 10 11 43.0 49.0 63.0 Dynamic Gold Dynamic Gold AMT N..PO MODU 3 TOU105 ize:58 / Weight:52.0g VIZAD IN VIZAD IB ize:60 / Weight:50.0g Conforming to 2010 New Groove ules ee page 34 for available steel shaft varieties. 22 TW737book_E_fin.indd 23 2016/11/09 13:14

23 TW737book_E_fin.indd 24 2016/11/09 13:14

For players seeking a Tour-proven design with distance, forgiveness and feel. 25C mild steel precision cast manufacturing method. Evolved as an easy-to-use model that can be offered to a wider range of golfers. 30 2.6mm 2.9mm #7 trength of the portion 1.5 mm from the surface has been improved The face strength has been enhanced by the special manufacturing method # (No.) 3 19.0 59.5 4 21.0 60.0 5 24.0 60.5 6 27.0 61.0 7 30.0 61.5 8 34.0 62.0 9 38.0 62.5 10 11 43.0 49.0 63.0 W 56.0 63.5 ize:62 / Weight:47.0g N.. PO 950GH TW737 P VIZAD IN VIZAD IB ize:60 / Weight:50.0g o Yeon yu Conforming to 2010 New Groove ules ee page 34 for available steel shaft varieties. 24 TW737book_E_fin.indd 25 2016/11/09 13:14

Liang Wen Chong 25 TW737book_E_fin.indd 26 2016/11/09 13:14

2 017 model Continuous polishing process to meet the demands of professional and serious golfers: Wedge, TW-W Bounce (deg.) 48 50 52 56 58 9 8 12 8 12 60 8 48 / 50 / 52 56 / 58 / 60 Triangular shape helps maintain flow from the iron sets to wedges. This sole shape provides excellent turf interaction and distance control. A slightly larger head compared to previous wedge models, which gives golfers more confidence at address. The 58 degrees model, used by Pro Golfer HidetoTanihara, has 8 degrees of bounce designed into the sole. We worked one on one with Hideto, using a continous polishing process at a rate of 0.1mm, until he was fully satisfied with the performance of this wedge. TW-W 48 52 58 58 58 Dynamic Gold ize:58 (ound Models) / Weight:51.0g VIZAD IB W(85W 95W 105W)*85W and 105W is made to order. ize:60 (ound Models) / Weight:49.0g Conforming to 2010 New Groove ules ee page 34 for available steel shaft varieties. 26 TW737book_E_fin.indd 27 2016/11/09 13:15

pecification Head material / manufacturing process: 811 titanium / Casting Face material / manufacturing process: 6-4 titanium / Forged Head material / manufacturing process: 811 titanium / Casting Face material / manufacturing process: 6-4 titanium / Forged Head volume (cm 3 ) Distance to center of gravity (mm) Depth to center of gravity (mm) Length (inches) 9.5 40.0 35.5 58.5 457 45.5 10.5 40.5 36.0 Head volume (cm 3 ) Distance to center of gravity (mm) Depth to center of gravity (mm) Length (inches) 9.5 38.0 38.0 58.5 450 45.5 10.5 38.5 38.5 wing weight VIZAD E-A E-C E-Z D1 306 D1 305 D1 306 D2 309 D2 315 D2 308 D2 314 D2 309 D2 315 D2 310 D2 316 D2 323 D2 309 D2 315 D2 321 D2 310 D2 316 D2 322 D3 320 D3 327 D3 319 D3 325 D3 320 D3 326 wing weight VIZAD E-A E-C E-Z D1 306 D1 305 D1 306 D2 309 D2 315 D2 308 D2 314 D2 309 D2 315 D2 310 D2 316 D2 323 D2 309 D2 315 D2 321 D2 310 D2 316 D2 322 D3 320 D3 327 D3 319 D3 325 D3 320 D3 326 Head material / manufacturing process: 811 titanium / Casting Face material / manufacturing process: 6-4 titanium / Forged Head volume (cm 3 ) Distance to center of gravity (mm) Depth to center of gravity (mm) Length (inches) 9.5 39.5 40.0 58.5 456 45.5 10.5 40.0 40.5 Head material / manufacturing process: 811 titanium / Casting Face material / manufacturing process: 5N titanium / olled Head volume (cm 3 ) Distance to center of gravity (mm) Depth to center of gravity (mm) Length (inches) 9.5 41.0 36.0 59.0 460 45.5 10.5 41.5 36.5 wing weight VIZAD E-A E-C E-Z D1 306 D1 305 D1 306 D2 309 D2 315 D2 308 D2 314 D2 309 D2 315 D2 310 D2 316 D2 323 D2 309 D2 315 D2 321 D2 310 D2 316 D2 322 D3 320 D3 327 D3 319 D3 325 D3 320 D3 326 wing weight VIZAD E-A E-C E-Z D1 306 D1 305 D1 306 D2 309 D2 315 D2 308 D2 314 D2 309 D2 315 D2 310 D2 316 D2 323 D2 309 D2 315 D2 321 D2 310 D2 316 D2 322 D3 320 D3 327 D3 319 D3 325 D3 320 D3 326 Head material / manufacturing process: U630 / Casting Face material / manufacturing process: High-strength custom steel / Forged 3W/13 3W/15 58.0 Head volume (cm 3 ) 183 184 Length (inches) 42. Head material / manufacturing process: U630 / Casting Face material / manufacturing process: High-strength custom steel / Forged Head volume (cm 3 ) Length (inches) 3W/15 57.5 164 42. 5W/18 58.0 150 42.25 5W/18 58.5 162 42.25 7W/21 58.5 135 41. wing weight E-A VIZAD E-C E-Z D1 323 D1 322 D1 323 3W/13 15 5W/18 7W/21 D2 326 D2 332 D2 325 D2 331 D2 326 D2 332 D2 327 D2 333 D2 340 D2 326 D2 332 D2 338 D2 327 D2 333 D2 339 D1 327 D1 326 D1 327 D2 330 D2 336 D2 329 D2 335 D2 330 D2 336 D2 331 D2 337 D2 344 D2 330 D2 336 D2 342 D2 331 D2 337 D2 343 D1 331 D1 330 D1 331 D2 334 D2 340 D2 333 D2 339 D2 334 D2 340 D2 335 D2 341 D2 348 D2 334 D2 340 D2 346 D2 335 D2 341 D2 347 27 TW737book_E_fin.indd 28 2016/11/09 13:15

Head material / manufacturing process: U630 / Casting Face material / manufacturing process: High-strength custom steel / olled Head volume (cm 3 ) Length (inches) wing weight VIZAD IN-U / IB-U N..PO 950GH VIZAD IN-U IB-U N..PO 950GH 85 95 105 U19/19 40.0 39.5 D1 345 D2 356 D2 366 D2 3 D3 385 D3 393 D2 390 U22/22 58.5 128 39.5 39.0 D1 349 D2 360 D2 370 D2 379 D3 389 D3 397 D2 395 U25/25 39.0 38.5 D1 353 D2 364 D2 374 D2 383 D3 393 D3 401 D2 400 Head material / manufacturing process: U630 / Casting Face material / manufacturing process: High-strength custom steel / olled Head volume (cm 3 ) Length (inches) wing weight VIZAD IN-U / IB-U N..PO 950GH VIZAD IN-U IB-U N..PO 950GH 85 95 105 U16c/16 40.5 40.0 D1 342 D2 353 D2 363 D2 372 D3 382 D3 390 D2 386 U19c/19 57.5 112 40.0 39.5 D1 346 D2 357 D2 367 D2 376 D3 386 D3 394 D2 391 U22c/22 39.5 39.0 D1 350 D2 361 D2 371 D2 380 D3 390 D3 398 D2 396 Head material / manufacturing process: Mild steel / Forged Head plating: Half mirror + Mirror finish / Double-layer painting # (No.) Face progression (mm) Length (inches) Dynamic Gold VIZAD IB95 wing weight Dynamic Gold VIZAD IB95 200 3 21.0 59.5 38. 39.125 D2 420 D1 394 4 24.0 D2 425 D1 400 5 27.0 60.0 60.5 61.0 61.5 62.0 62.5 4.0 4.2 4.7 4.9 38.25 37. 37.25 36. 36.25 35. 38.625 38.125 37.625 37.125 36.625 36.125 D2 432 D1 406 6 30.0 D2 439 D1 412 7 34.0 D2 446 D1 419 8 38.0 D2 453 D1 426 9 42.0 D2 461 D1 434 10 46.0 63.0 35.25 35.625 D2 469 D1 441 Head material / manufacturing process: Mild steel / Forged Head plating: Half mirror + Mirror finish / Double-layer painting # (No.) Face progression (mm) Length (inches) Dynamic Gold AMT VIZAD IB95 wing weight Dynamic Gold AMT VIZAD IB95 200 3 20.0 59.5 38. 39.125 D2 403 D1 394 4 22.0 D2 411 D1 400 5 25.0 60.0 60.5 61.0 61.5 62.0 62.5 4.0 4.2 4.7 4.9 38.25 37. 37.25 36. 36.25 35. 38.625 38.125 37.625 37.125 36.625 36.125 D2 419 D1 406 6 28.0 D2 428 D1 412 7 32.0 D2 438 D1 419 8 36.0 D2 448 D1 426 9 41.0 D2 457 D1 434 10 46.0 63.0 35.25 35.625 D2 468 D1 441 Head material / manufacturing process: Mild steel / Forged Head plating: Half mirror + Mirror finish / Double-layer painting # (No.) Face progression (mm) Length N.. PO MODU 3 TOU105 (inches) VIZAD IB85 wing weight N.. PO MODU 3 TOU105 VIZAD IB85 3 19.0 59.5 38. 39.125 D2 400 D1 385 4.0 4 21.0 60.0 38.25 38.625 D2 407 D1 391 5 24.0 60.5 4.2 37. 38.125 D2 413 D1 397 6 27.0 61.0 37.25 37.625 D2 419 D1 404 7 30.0 61.5 4.7 36. 37.125 D2 425 D1 410 8 34.0 62.0 36.25 36.625 D2 432 D1 416 9 38.0 62.5 35. 36.125 D2 440 D1 423 10 43.0 63.0 4.9 35.25 35.00 35.625 35.000 D2 448 D1 429 11 49.0 D2 450 D1 437 Head material / manufacturing process: Mild steel / Casting Head plating: atin finish / Double-layer plating, polished and painted finish (silver) # (No.) Face progression (mm) Length (inches) wing weight N.. PO 950GH VIZAD IN VIZAD IB85 N.. PO 950GH VIZAD IN VIZAD IB85 3 19.0 59.5 39.0 39.25 39.125 D2 394 D1 362 D1 385 4 21.0 60.0 3.25 38.5 38. 38.625 D2 399 D1 368 D1 391 5 24.0 60.5 38.0 38.25 38.125 D2 405 D1 374 D1 397 6 27.0 61.0 37.5 37. 37.625 D2 412 D1 380 D1 404 7 30.0 61.5 3. 37.0 37.25 37.125 D2 419 D1 387 D1 410 8 34.0 62.0 36.5 36. 36.625 D2 426 D1 393 D1 416 9 10 11 W 38.0 43.0 49.0 56.0 62.5 63.0 63.5 4.25 4. 36.0 36.25 36.125 D2 433 D1 400 D1 423 35.5 35. 35.625 D2 440 D1 406 D1 429 D2 446 D1 416 D1 437 35.0 35.00 35.000 D3 449 D2 418 D2 439 Head material / manufacturing process: Mild steel / Forged Head plating: Backface:Half mirror + Mirror finish / Face:Blast finish Bounce (deg.) Face progression (mm) Length (inches) Dynamic Gold VIZAD IB 95W wing weight Dynamic Gold VIZAD IB 95W 200 48 50 52 56 58 9 8 12 8 12 63.5 5.5 35.0 35.125 D2 472 D1 447 D3 474 D2 449 60 8 Made in Japan 28 TW737book_E_fin.indd 29 2016/11/09 13:15

29 TW737book_E_fin.indd 30 2016/11/09 13:15

Good head stability and feel. This is what TEAM HONMA demands from this model. Extensive feedback from TEAM HONMA members has enabled Honma to develop a putter line that appeals to all professionals and serious golfers CNC Milled oft tainless U303 Mallet Center-haft Blade Crank-Neck An aluminum sole, lightenes the central portion TW-PT Loft angle (deg.) Total weight (g) TW-PT Two 14g tungste n weights in the sole with increased MOI. *Tungsten weight is not adjustable. By the request of Professional player Komei Oda (JGTO), a drilled hosel was engineered to make the toe side heavier and lighten the heel. This lowers the center of gravity and makes for a more stable stroke. Mallet 70.0 535 2.5 Blade 71.0 530 Head Material (Mallet) : oft tainless U303 (body) Aluminium (sole) Tungsten (weight) (Blade) : oft tainless U303 (body) Tungsten (weigh) Manufacturing Technique Forged CNC-milled (body) Finish Matt black haft teel Club Length (inch) 34 inches Grip IOMIC (ｇ) Made in Japan Megumi Kido 30 TW737book_E_fin.indd 31 2016/11/09 17:08

Hideto Tanihara 31 TW737book_E_fin.indd 32 2016/11/09 13:15

"I would like a big and forgiving muscle back", requested Pro Golfer Hideto Tanihara. HONMA's development team saw this as a great challenge because a muscle back is usually not very forgiving. The development team got a lot of feedback from our pros, and combined with Honma's advanced development capabilities, the evolution of this muscle back became a reality. A large muscleback head x amorphous metal fiber help us to more powerfully and easily obtain the kinds of results in terms of distance that we all dream of achieving An advanced CAD system has enabled Honma Golf to create an optimum center of gravity design, allowing the sweet spot of the club face to be enlarged to combine the exceptional playability of muscle back with increased confidence over the ball. A 2 degree strong loft in our muscle back irons perfectly aligned with the needs of our professional staffers seeking a high, strong trajectory with excellent carry. By enlarging the club head, any vibrations have been reduced significantly, and when compared to steel shafts, our specially designed iron carbon shaft, the "VIZAD IB", also dampens vibration by incorporating an amorphous metal fiber into the outermost layer of the shaft. TW-BM #5 #8 #5 #5 Head material / manufacturing process: Mild steel / Casting Head plating: Half mirror + Mirror Finish / Double-layer Painting Bounce (deg.) Face progression (mm) Length (inches) wing weight VIZAD IB95 4 22.0 60.5 38.625 D1 399 D1 400 D2 404 5 25.0 61.0 3. 38.125 D1 405 D1 406 D2 410 6 28.0 61.5 37.625 D1 411 D1 412 D2 416 7 32.0 62.0 37.125 D1 418 D1 419 D2 423 8 36.0 62.5 36.625 D1 426 D1 427 D2 431 4.25 9 41.0 63.0 36.125 D1 434 D1 435 D2 439 10 46.0 63.5 35.625 D1 441 D1 442 D2 446 Made in Japan VIZAD IB ize:60 / Weight:50.0g Conforming to 2010 New Groove ules ee page 34 for available steel shaft varieties. 32 TW737book_E_fin.indd 33 2016/11/09 13:15

Available selection For greater distance and directionality. Choose the perfect club for you from among our many options. Driver Head TW737 445 TW737 450 TW737 4 TW737 460 VIZAD haft E-A E-A E-A E-A 85 E-C E-C E-C E-C 85 E-Z E-Z E-Z E-Z 85 46.0 D4 (D4~D7) D4 (D4~D7) D5 (D5~D8) D5 (D5~D8) D5 (D5~D8) D5 (D5~D8) 45. D4 (D4~D7) D4 (D4~D7) D4 (D4~D7) D4 (D4~D7) Balance 45.5 D2 (D0~D3) D2 (D0~D3) 45.25 D2 (C9~D2) D2 (D0~D3) D2 (D0~D3) D2 (C9~D2) D2 (D0~D3) D2 (D0~D3) D2 (D0~D3) 45.0 D1 (C8~D1) D1 (C9~D2) D1 (C9~D2) D1 (D0~D3) D1 (C8~D1) D1 (C9~D2) D1 (D0~D3) D1 (D0~D3) D1 (C9~D2) D1 (C9~D2) D1 (D0~D3) D1 (D0~D3) Fairway Wood Head TW737 FW TW737 FWc VIZAD haft E-A E-A E-A E-A 85 E-C E-C E-C E-C 85 E-Z E-Z E-Z E-Z 85 +0.5 inches D4 (D4~D7) D4 (D4~D7) D5 (D5~D8) D4 (D4~D7) D5 (D5~D8) +0.25 inches D4 (D4~D7) D4 (D4~D7) Balance tandard D2 (D0~D3) D2 (D0~D3) 0.25 inches D2 (C9~D2) D2 (C9~D2) D2 (D0~D3) D2 (D0~D3) D2 (D0~D3) D2 (D0~D3) D2 (D0~D3) 0.5 inches D1 (C8~D1) D1 (C8~D1) D1 (C9~D2) D1 (D0~D3) D1 (C9~D2) D1 (C9~D2) D1 (D0~D3) D1 (D0~D3) D1 (C9~D2) D1 (C9~D2) D1 (D0~D3) D1 (D0~D3) tandard length #3/13 :42. (Only FW) #3/15 :42. #5/18 :42.25 #7/21 :41. (Only FWc) Utility Head TW737 UT TW737 UTc haft IN U IN U IN U VIZAD IB 85U IB 95U IB 105U N..PO95GH +0.5 inches D4 (D4~D7) D4 (D4~D7) D5 (D5~D8) +0.25 inches D1 (D1~D4) D4 (D4~D7) Balance tandard D1 (D0~D3) D2 (D0~D3) D3 (D2~D5) 0.25 inches D1 (C9~D2) D2 (C9~D2) D2 (D0~D3) D3 (D1~D4) D3 (D2~D5) D2 (D0~D3) 0.5 inches D0 (C8~D1) D1 (C8~D1) D1 (C9~D2) D1 (D0~D3) D2 (D0~D3) D1 (C9~D2) tandard length (Carbon/teel) 16 : 40.5/40.0 (Only UTc) 19 : 40.0/39.5 22 : 39.5/39.0 25 : 39.0/38.5 (Only UT) Iron Head TW737 Vn TW737 V TW737 Vs TW737 P haft MODU3 TOU105 Dynamic Gold Dynamic Gold AMT N..PO 950GH IN IN IN VIZAD IB85 IB95 IB105 +0.5 inches D5 D5 D5 D5 +0.25 inches D3 D3 D3 D3 D2 D2 D2 D2 D2 D2 Balance tandard D2 D2 D2 D2 D1 D1 D1 D1 D1 D1 0.25 inches D1 D1 D1 D1 D0 D0 D0 D0 D0 D0 0.5 inches D0 D0 D0 D0 C9 C9 C9 C9 C9 C9 tandard length #5:37. #5:38.0 #5:38.25 #5:38.125 Colored cells indicate standard length. Figures are for Flex. (For all clubs) Lengths can be ordered in increments of 0.25 inches, and balance in increments of one point. Club gross weight and shaft frequency cannot be specified. Additional fees may apply depending on specified range. 33 TW737book_E_fin.indd 34 2016/11/09 13:15

List of steel shafts for custom order irons Model Dynamic Gold CPT Dynamic Gold CPT TOU IUE DG PO Dynamic Gold AMT Dynamic Gold AMT TOU IUE Dynamic Gold Dynamic Gold TOU IUE Dynamic Gold L G 90 CPT G 95 G 85 DG PINNE P 95 P 105 P 115 ALLOY BLUE OA Flex 200 100 200 100 300 200 100 300 200 300 400 100 200 100 200 300 400 200 300 400 100 200 100 300 300 100 300 200 300 200 300 200 Wedge Wedge+ 300 200 300 200 300 200 300 200 120 125 120 125 114.0 109.0 123.0 118.0 130.0 125.0 103.0 127.0 105.0 129.0 106.0 130.0 108.0 132.0 106.0 130.0 105.0 129.0 106.0 130.0 125 127 129 129 130 132 130 129 130 104 106 109 95 98 101 103 93 94 124 131 100 102 106 108 114 117 90 94 Kick-point Mid Mid Flow (Mid to High) High High High High High High High Low-mid Low Low High Low-mid Low-mid Low-mid Low-mid Grip weight (g) TW-ubber M58 (52.0g) TW-ubber M58(51.0g) TW-ubber M60(50.0g) TW-ubber M58(52.0g) TW-ubber M60(50.0g) Model N..PO ZEL07 N..PO ZEL08 N..PO 950GH N..PO 950GH WF N..PO 950GH HT N..PO V90 N..PO 850GH N..PO 0GH Wrap Tech N..PO 1050GH N..PO 1150GH TOU N..PO MODU 3 TOU130 N..PO MODU 3 YTEM3 TOU125 N..PO MODU 3 TOU120 N..PO MODU 3 TOU105 N..PO MODU 3 WEDGE Flex 2 T 105 115 125 73.5 74.0 77.5 84.0 87.5 94.5 97.0 98.0 104.0 94.0 99.0 98.5 103.5 104.0 109.0 94.5 98.0 92.0 96.5 87.0 91.0 79.0 83.0 106.0 109.5 114.0 111.5 116.0 121.5 121.0 124.0 129.0 127.5 128.5 126.0 111.0 114.0 120.0 126.0 103.0 106.5 112.0 111.0 122.0 133.0 Kick-point Low Low Mid Mid Mid Mid Mid Low Mid Mid Mid High High-mid High Mid Grip weight (g) TW-ubber M60 (50.0g) TW-ubber M62 (47.5g) TW-ubber M60 (50.0g) TW-ubber M60 (49.0g) Model KB TOU KB TOU-FLT KB TOU 105 KB TOU 90 KB TOU C-TAPE KB TOU C-TAPE 95 KB HI-EV KB TOU -V KB WEDGE Flex + + + + + + 110 115 120 125 130 110 115 120 125 130 105 110 115 95 102 110 115 120 125 130 105 110 115 115 125 135 100 110 120 110 120 130 Kick-point Mid Low High-mid Low-mid Grip weight (g) TW-ubber M58 (52.0g) TW-ubber M58 (51.0g) TW-ubber M58 (52.0g) TW-ubber M58 (51.0g) Model POJECT POJECT Pxi POJECT LZ Flex 5.0(+) 5.5() 6.0(+) 6.5() 7.0(+) 5.0(+) 5.5() 6.0(+) 6.5() 7.0(+) 5.0(+) 5.5() 6.0(+) 6.5() 113.0 118.0 121.0 125.0 130.0 107.0 112.0 115.0 110 115 120 125 Kick-point High High-mid High-mid Grip weight (g) TW-ubber M58 (52.0g) Marked items will incur an additional charge when exchanging order-made shafts. * Delivery times vary by model and specification * Values shown are manufacturer published values * haft weights are weights prior to cutting 34 TW737book_E_fin.indd 35 2016/11/09 13:15

Products may differ slightly in color from those shown in the catalog. Product specifications are subject to change without notice, and manufacture of individual products may be terminated at any time. Because specifications shown in the catalog, such as product weight, are design specifications, actual specifications may differ slightly from those listed. Zxion is registered trademarks of the KBEIEN, LTD. TOAYCA and NANOALLOY are registered trademarks of the Toray Industry, Inc. The information in this catalog is valid as of October 2016. You may purchase our products at our direct stores and or authorized dealers that display above wooden certificate. HONMA GOLF CO.,LTD. www.honmagolf.co.jp TW737book_E_fin.indd 36 2016/11/09 13:15