BGW-insallaion insrucion for BGW-anchor wih daa head BGW- lifing eye wih swivel for axial and diagonal lif. Grease he hread well. Lifing loop for diagonal lifing unil 45. Screw he loop unil he ground of he socke. Grease he hread well. The connecion wih he shuering occurs by screws respecively plasic holding discs. To preven he hread from geing diry, plasic soppers have o be used. The load ables are for o concree cube pressure srenghs: 15 N/ mm² and 25 N/ mm². For fresh concree a 15 N/ mm² are for he diagonal lif, reinforcemen hangers are suiable (able). For already hard concree wih a leas 25 N/ mm² pressure srengh, he maximal load for diagonal lif, wih or wihou reinforcemen hanger, is given. BGW-lifing loop Goliah wih forged head Diagonal able hread load M/Rd axial pull 0 diagonal pull ill 45 wihou diagonal pull clip Minimum reinforcemen for all concree pars wih hread M/Rd12, M/Rd14 and M/Rd16: wo mas Q 131 (150 x 5 mm). Wih hread M/Rd18, M/Rd20, M/Rd24, M/Rd30, M/Rd36, M/Rd42, M/Rd52: wo mas Q 188 (150 x 6 mm). Addiional reinforcemen par a axialand diagonal lif. Before he insallaion ino he concree par, a view conrol has o be made. I has o be checked wheher: a) he hread works b) he cross-hole c) he reinforcemen bar d) he sopper is damaged. Lifing loops have o be changed a: a) if he rope is damaged b) if he hread par is damaged (be bend by diagonal lif, ec.) diagonal pull ill 90 wihou diagonal pull clip 12 0,5 0,5 0,50 0,250 16 1,2 1,2 0,65 0,325 20 2,0 2,0 0,80 0,400 24 2,5 2,5 0,85 0,425 30 4,0 4,0 2,10 1,050 36 6,3 6,3 3,00 1,500 42 8,0 8,0 4,60 2,300 52 12,5 12,5 6,60 3,300 The values always correspond o he appropriae lifing anchor sysem for concree elemens depending on he buil-in ranspor anchor. BGW-Bohr GmbH 97854 Seinfeld Tel. 09359/1650 Fax. 09359/1640 www.bgw-bohr.de 09/11 (03/14)
Special reinforcemen pars a axial and diagonal lif Saic evidence of diagonal lif for BGW double waved end anchors 1. Basis Calculaion basis: DIN 0145-1 Reinforced concree seel consrucion BGR 106 Safey rules for ransporanchor for concree componens Maerial: Reinforcing seel BST 500/550 Concree C12/15 Sysem: The double waved end anchors are used of elemen of fixure wih inboarded hread in a bearing concree elemen ou of C12/15. The insallaion is orhougonal o he concree surface. Double waved end anchors can be load wih cenric load, diagonal pull and axial. Insalling a diagonal load (ß[45 ) o design a 15 o surface inclined loop of reinforcemen. BGW-Bohr GmbH 97854 Seinfeld Tel. 09359/1650 Fax. 09359/1640 www.bgw-bohr.de 09/11 (01/00)
BGW-Insallaion insrucion for BGW-lifing socke and ranspor anchors All facs concerning he load are valid only in connecion wih he reinforcemen hangers of he able in he margin. maximal load in ( 1 = 10 N; 1000 = 1 = 10 kn ) > 15 N/ mm² > 25 N/ mm² concree pressure srengh concree pressure srengh ledge / cm border disance e/ cm axial lif diagonal lif wih sirrup ledge / cm border disance e/ cm Axial lif diagonal lif unil 45 wih wihou reinforcemen Rd 12 x 40 500 6 18 500 240 6 16 500 500 500 20 Rd 14 x 48 800 6 22 800 260 6 18 800 600 700 22 Rd 16 x 58 1200 8 25 1200 650 6,5 20 1200 650 1000 26 Rd 18 x 65 1600 10 30 1600 800 7 20 1600 700 1200 30 Rd 20 x 70 2000 10 30 2000 800 7 25 2000 800 1400 35 Rd 24 x 80 2500 10 32 2500 800 8 30 2500 850 2000 44 Rd 30 x 101 4000 14 35 4000 1800 10 35 4000 2100 4000 60 Rd 36 x 125 6300 14 40 6300 2000 10 40 6300 3000 4200 65 Rd 42 x 140 8000 16 50 8000 2800 12 50 8000 4600 7100 70 Rd 52 x 170 12500 20 60 12500 3800 16 60 12500 6600 9000 80 Z Reinforcemen able for lifing sockes and ranspor anchors maximum axial load Measuremens for he reinforcemen hangers ou of sainless seel BS 500 S (1 = 10 N; 1000 = 1 = 10 kn) d x h k G B Rd 12 x 40 500 6 300 60 Rd 14 x 48 800 8 300 70 Rd 16 x 58 1200 10 350 70 Rd 18 x 65 1600 10 350 70 Rd 20 x 70 2000 12 400 80 Rd 24 x 80 2500 14 450 100 Rd 30 x 101 4000 16 600 130 Rd 36 x 125 6300 20 600 150 Rd 42 x 140 8000 25 650 200 Rd 52 x 170 12500 25 900 300 All facs are only valid in connecion wih he reinforcemen hangers in he able. BGW-Bohr GmbH - 97854 Seinfeld - Tel. 09359/1650 - Fax. 09359/1640 www.bgw-bohr.de (09/11) (12/13)
BGW-insallaion insrucion for DWL, DWK Typ lengh form Axial-/ diagonal lif maximal load in ( 1 = 10 N; 1000 = 1 = 10 kn ) >15 N/ mm² concree pressure srengh crosswise lif Z ledge wih hanger Minimal border disance commen Rd mm cm /cm e/cm 12 120 DWK 500 / 250 ---- 20 14 16 Special reinforcemen 14 150 800 / 400 ---- 22 16 20 16 180 1200 / 600 ---- 26 19 30 diagonal lif see able 18 200 1600 / 800 ---- 30 21 35 a caalogue side BGW- insallaion 20 200 2000 / 1000 ---- 35 21,5 40 insrucion for BGW- 24 260 2500 / 1250 ---- 45 27 45 anchor 30 380 4000 / 2000 ---- 55 33,5 55 diagonal lif is: 36 430 6300 / 3150 ---- 60 42 70 42 450 8000 / 4000 ---- 80 48 80 12 190 DWL 500 / 500 250 30 6 16 Special reinforcemen 14 230 800 / 800 400 40 7 20 16 250 1200 / 1200 600 40 8 30 diagonal lif see able 18 300 1600 / 1600 800 50 10 35 a caalogue side 20 350 2000 / 2000 1000 55 11 40 BGW- insallaion 24 400 2500 / 2500 1250 60 12 45 insrucion for BGW- 30 500 4000 / 4000 2000 65 14 55 anchor 36 650 6300 / 6300 3150 80 20 70 diagonal lif is: 42 800 8000 / 8000 4000 100 24 80 52 900 12500 / 12500 6250 120 28 90 48 1400 22000 / 22000 11000 280 22 140 BGW-Bohr GmbH - 97854 Seinfeld - Tel. 09359/1650 - Fax. 09359/1640 www.bgw-bohr.de (09/11) (12/13)
BGW-insallaion insrucion for Fixing Insers and Ripped Foo Anchors Typ lengh form Axial-/ diagonal lif maximal load in ( 1 = 10 N; 1000 = 1 = 10 kn ) >15 N/ mm² concree pressure srengh crosswise lif Z ledge wih hanger Minimal border disance Rd mm cm /cm e/cm 12 100 RFA 500 250 12 174 500 250 30 6 15 14 105 800 400 14 167 800 400 40 6 20 16 130 1200 600 16 195 1200 600 40 8 20 18 150 1600 800 18 275 1600 800 50 10 25 20 190 2000 1000 20 300 2000 1000 60 10 30 24 210 2500 1250 24 275 2500 1250 60 12 30 30 390 4000 2000 30 510 4000 2000 70 14 35 36 330 6300 3150 80 20 40 42 450 8000 4000 100 24 50 52 750 12500 6250 120 27,5 60 commen Special reinforcemen diagonal lif see able a caalogue side BGW- insallaion insrucion for BGWanchor diagonal lif is: 12 190 Fixing 500 250 30 6 16 Special reinforcemen 14 230 Inser 800 400 40 7 20 16 250 1200 600 40 8 30 diagonal lif see able 18 300 1600 800 50 10 35 a caalogue side 20 350 2000 1000 55 11 40 BGW- insallaion 24 400 2500 1250 60 12 45 insrucion for BGW- 30 500 4000 2000 65 14 55 anchor 36 650 6300 3150 80 20 70 diagonal lif is: 42 800 8000 4000 100 24 80 52 900 12500 6250 120 28 90 BGW-Bohr GmbH - 97854 Seinfeld - Tel. 09359/1650 - Fax. 09359/1640 www.bgw-bohr.de (12/13)