ASME BPE 2014 DT Range of Bioprocessing Fittings

SME PE 2014 DT Range of ioprocessing Fittings lchem Process Ltd offer the full range of SME PE ioprocessing Fittings in both SF1 and SF4 surface finishes. The standard provides a good manufacturing guide to the common installation problems and offers solutions and examples of what is considered to be acceptable and unacceptable for the design of modern io-pharmaceutical installations. The standard also covers process vessel design, pump and valve selection and installation. The DT fittings are designed for orbital and automatic welding procedures and include, clamp ferrules, bends, tees, reducers, instrument tees and end caps. The DT fittings are offered in accordance with the range listed in the current 2014 standard, although for continuity we have chosen to keep to the original DT references specified in the original PE standard, namely DT-7 to DT-30 as the industry is already familiar with these items. Standard DT fittings are offered to SF-1 surface finish at 0.51µM Ra Max for both tube and fittings, with SF-4 (0.38µM Ra Max) being available on special order. The welding tangents of all DT the fittings have a controlled sulphur content of between 0.005 and 0.017%. This range is meant to balance with the sulphur content usually found in tube and should leads to a more even welding process. Material certification is offered to EN10204 3.1 for all fittings and tube supplied to SME PE. Valves: range of Diaphragm Valve, Sample Valves, Radial Seat Tank ottom valves, utterfly Valves, Non-Return Valves, all Valves and Piston Valves are also available to match the surface finishes offered in the standard. Features & options: Surface finish - SF-1 (0.5µM Ra Max) & SF-4 (0.25µM Ra Max) Sizes - ¼ to 6 with specials sizes made to order Fittings - ends, Tees, Reducers and End Caps Sulphur - Controlled sulphur range between 0.005 to 0.017% daptors - daptors available for special instrument pump applications Gaskets - FD 177.2600 & 177.1550, USP Class V1, 3 and CE 1935/2004 Metric - Orbital weld fittings available to DIN32676 & DIN11865 DS SME PE Clamp Weld End Page No: 1

Related Standards: DIN32676 Table, and C, Clamp Ferrules DIN11866 and DIN11865, Tube and Orbital Weld Fittings DIN11864 and DIN11853 FD 177.2600 and 177.1550 Clamp Gaskets 3 standard 18-03 class 111 Clamp Gaskets USP Class V1 section 88 with section 87 available to order EN102043.1 Material Certification Materials: 316L SS 1.4404 and 1.44435 low sulphur N-2 lloy400, C22 & C276 Duplex alloys UNS32750 & SF 2205 and 2507 6Mo products and 904L, 254SMO and L6-N Titanium and plastics such as S, Polypropylene and Nylon luminium Compatibility: Where the environment is deemed aggressive to either the seal or the pipework system, please provide details of the product media and operating conditions the pressure and temperature conditions. Our technical staff will assist you with the selection of the most appropriate material for your particular application. Related Products: Clamp Ferrules, lanks and daptors Diaphragm Valves septic Sample Valves Radial Seat Tank ottom Valves Non-Return Valves utterfly Valves all Valves DS SME PE Clamp Weld End Page No: 2

utomatic Weld Clamp end 90º - DT-12 (PE 2009) DT-4.1.1-2 (PE 2014) Part No ¼ 41.3 66.7 3167-0064 ⅜ 41.3 66.7 3167-0095 ½ 41.3 76.2 3167-013 ¾ 41.3 76.2 3167-019 1 50.8 76.2 3167-026 1.½ 69.9 95.3 3167-038 2 88.9 120.7 3167-051 2.½ 108.0 139.7 3167-064 3 127.0 158.8 3167-076 4 168.3 203.2 3167-102 6 266.7 292.1 3167-152 utomatic Weld Clamp end 45º - DT-13 (PE 2009) DT-4.1.1-5 (PE 2014) Part No ¼ 50.8 25.4 3168-0064 ⅜ 50.8 25.4 3168-0095 ½ 57.2 25.4 3168-013 ¾ 57.2 25.4 3168-019 1 57.2 28.6 3168-026 1.½ 63.5 36.5 3168-038 2 76.2 44.5 3168-051 2.½ 85.7 52.4 3168-064 3 92.1 60.3 3168-076 4 114.3 79.4 3168-102 6 158.8 133.4 3168-152 DS SME PE Clamp Weld End Page No: 3

utomatic Weld Short Red. Tee Clamp - DT-14 (PE 2009) DT-4.1.2-7 (PE 2014) Part No ⅜ ¼ 44.5 25.4 3169-0095-0064 ½ ¼ 47.6 25.4 3169-013-0064 ½ ⅜ 47.6 25.4 3169-013-0095 ¾ ¼ 50.8 25.4 3169-019-0064 ¾ ⅜ 50.8 25.4 3169-019-0095 ¾ ½ 50.8 25.4 3169-019-013 1 ¼ 54.0 28.6 3169-026-0064 1 ⅜ 54.0 28.6 3169-026-0095 1 ½ 54.0 28.6 3169-026-013 1 ¾ 54.0 28.6 3169-026-019 1.½ ½ 60.3 34.9 3169-038-013 1.½ ¾ 60.3 34.9 3169-038-019 1.½ 1 60.3 34.9 3169-038-026 2 ½ 73.0 41.3 3169-051-013 2 ¾ 73.0 41.3 3169-051-019 2 1 73.0 41.3 3169-051-026 2 1.½ 73.0 41.3 3169-051-038 2.½ ½ 79.4 47.6 3169-064-013 2.½ ¾ 79.4 47.6 3169-064-019 2.½ 1 79.4 47.6 3169-064-026 2.½ 1.½ 79.4 47.6 3169-064-038 2.½ 2 79.4 47.6 3169-064-051 3 ½ 85.7 54.0 3169-076-013 3 ¾ 85.7 54.0 3169-076-019 3 1 85.7 54.0 3169-076-026 3 1.½ 85.7 54.0 3169-076-038 3 2 85.7 54.0 3169-076-051 3 2.½ 85.7 54.0 3169-076-064 4 ½ 104.8 66.7 3169-102-013 4 ¾ 104.8 66.7 3169-102-019 4 1 104.8 66.7 3169-102-026 4 1.½ 104.8 66.7 3169-102-038 4 2 104.8 66.7 3169-102-051 4 2.½ 104.8 66.7 3169-102-064 4 3 104.8 66.7 3169-102-076 6 4 142.9 95.3 3169-152-102 DS SME PE Clamp Weld End Page No: 4

utomatic Weld - Short Tee Clamp - DT-15 (PE 2009) DT-4.1.2-2 (PE 2014) Part No ¼ 44.5 25.4 316-0064 ⅜ 44.5 25.4 316-0095 ½ 47.6 25.4 316-013 ¾ 50.8 28.6 316-019 1 54.0 28.6 316-026 1.½ 60.3 34.9 316-038 2 73.0 41.3 316-051 2.½ 79.4 47.6 316-064 3 85.7 54.0 316-076 4 104.8 69.9 316-102 6 142.9 117.5 316-152 Clamp end 90 - DT-16 (PE 2009) DT-4.1.1-3 (PE 2014) R R Part No ¼ 41.3 41.3-316-0064 ⅜ 41.3 41.3-316-0095 ½ 41.3 41.3-316-013 ¾ 41.3 41.3-316-019 1 50.8 50.8-316-026 1.½ 69.9 69.9-316-038 2 88.9 88.9-316-051 2.½ 108.0 108.0-316-064 3 127.0 127.0-316-076 4 168.3 168.3-316-102 6 266.7 266.7-316-152 DS SME PE Clamp Weld End Page No: 5

Clamp end 45 - DT-17 (PE 2009) DT-4.1.1-6 (PE 2014) R R Part No ¼ 25.4 25.4-316C-0064 ⅜ 25.4 25.4-316C-0095 ½ 25.4 25.4-316C-013 ¾ 25.4 25.4-316C-019 1 28.6 28.6-316C-026 1.½ 36.5 36.5-316C-038 2 44.5 44.5-316C-051 2.½ 52.4 52.4-316C-064 3 60.3 60.3-316C-076 4 79.4 79.4-316C-102 6 133.4 133.4-316C-152 DS SME PE Clamp Weld End Page No: 6

Clamp Equal Tee - DT-18 (PE 2009) DT-4.1.2-4 (PE 2014) Part No ¼ 57.2 57.2 316E-0064 ⅜ 57.2 57.2 316E-0095 ½ 57.2 57.2 316E-013 ¾ 60.3 60.3 316E-019 1 66.7 66.7 316E-026 1.½ 73.0 73.0 316E-038 2 85.7 85.7 316E-051 2.½ 92.1 92.1 316E-064 3 98.4 98.4 316E-076 4 120.7 120.7 316E-102 6 181.0 181.0 316E-152 Clamp Equal Cross - DT-18 (PE 2009) DT-4.1.2-4 (PE 2014) Part No ¼ 57.2 57.2 316D-0064 ⅜ 57.2 57.2 316D-0095 ½ 57.2 57.2 316D-013 ¾ 60.3 60.3 316D-019 1 66.7 66.7 316D-026 1.½ 73.0 73.0 316D-038 2 85.7 85.7 316D-051 2.½ 92.1 92.1 316D-064 3 98.4 98.4 316D-076 4 120.7 120.7 316D-102 6 181.0 181.0 316D-152 DS SME PE Clamp Weld End Page No: 7

Clamp Reducing Tee - DT-19 (PE 2009) DT-4.1.2-8 (PE 2014) Part No ⅜ ¼ 57.2 57.2 316F-0095-0064 ½ ¼ 60.3 60.3 316F-013-0064 ½ ⅜ 60.3 60.3 316F-013-0095 ¾ ¼ 63.5 63.5 316F-019-0064 ¾ ⅜ 63.5 63.5 316F-019-0095 ¾ ½ 63.5 63.5 316F-019-013 1 ¼ 66.7 66.7 316F-026-0064 1 ⅜ 66.7 66.7 316F-026-0095 1 ½ 66.7 66.7 316F-026-013 1 ¾ 66.7 66.7 316F-026-019 1.½ ½ 73.0 73.0 316F-038-013 1.½ ¾ 73.0 73.0 316F-038-019 1.½ 1 73.0 73.0 316F-038-026 2 ½ 85.7 79.4 316F-051-013 2 ¾ 85.7 79.4 316F-051-019 2 1 85.7 79.4 316F-051-026 2 1.½ 85.7 79.4 316F-051-038 2.½ ½ 92.1 85.7 316F-064-013 2.½ ¾ 92.1 85.7 316F-064-019 2.½ 1 92.1 85.7 316F-064-026 2.½ 1.½ 92.1 85.7 316F-064-038 2.½ 2 92.1 85.7 316F-064-051 3 ½ 98.4 92.1 316F-076-013 3 ¾ 98.4 92.1 316F-076-019 3 1 98.4 92.1 316F-076-026 3 1.½ 98.4 92.1 316F-076-038 3 2 98.4 98.4 316F-076-051 3 2.½ 98.4 98.4 316F-076-064 4 1 120.7 104.8 316F-102-026 4 1.½ 120.7 104.8 316F-102-038 4 2 120.7 111.1 316F-102-051 4 2.½ 120.7 111.1 316F-102-064 4 3 120.7 111.1 316F-102-076 6 3 181.0 136.5 316F-152-076 6 4 181.0 146.1 316F-152-102 DS SME PE Clamp Weld End Page No: 8

Clamp Short Reducing Tee - DT-20 (PE 2009) DT-4.1.2-9 (PE 2014) Part No ⅜ ¼ 57.2 25.4 316G-0095-0064 ½ ¼ 60.3 25.4 316G-013-0064 ½ ⅜ 60.3 25.4 316G-013-0095 ¾ ¼ 63.5 25.4 316G-019-0064 ¾ ⅜ 63.5 25.4 316G-019-0095 ¾ ½ 63.5 25.4 316G-019-013 1 ¼ 66.7 28.6 316G-026-0064 1 ⅜ 66.7 28.6 316G-026-0095 1 ½ 66.7 28.6 316G-026-013 1 ¾ 66.7 28.6 316G-026-019 1 ½ ½ 73.0 34.9 316G-038-013 1 ½ ¾ 73.0 34.9 316G-038-019 1 ½ 1 73.0 34.9 316G-038-026 2 ½ 85.7 41.3 316G-051-013 2 ¾ 85.7 41.3 316G-051-019 2 1 85.7 41.3 316G-051-026 2 1 ½ 85.7 41.3 316G-051-038 2 ½ ½ 92.1 47.6 316G-064-013 2 ½ ¾ 92.1 47.6 316G-064-019 2 ½ 1 92.1 47.6 316G-064-026 2 ½ 1 ½ 92.1 47.6 316G-064-038 2 ½ 2 92.1 47.6 316G-064-051 3 ½ 98.4 54.0 316G-076-013 3 ¾ 98.4 54.0 316G-076-019 3 1 98.4 54.0 316G-076-026 3 1 ½ 98.4 54.0 316G-076-038 3 2 98.4 54.0 316G-076-051 3 2 ½ 98.4 54.0 316G-076-064 4 1 120.7 66.7 316G-102-026 4 1 ½ 120.7 66.7 316G-102-038 4 2 120.7 66.7 316G-102-051 4 2 ½ 120.7 66.7 316G-102-064 4 3 120.7 66.7 316G-102-076 6 3 181.0 92.1 316G-152-076 6 4 181.0 95.3 316G-152-102 DS SME PE Clamp Weld End Page No: 9

Clamp Concentric Reducer - DT-21 (PE 2009) DT-4.1.3-3 (PE 2014) L1 L2 Part No ¾ ½ 79.4 50.8 316H-019-013 1 ½ 88.9 63.5 316H-026-013 1 ¾ 79.4 50.8 316H-026-019 1.½ ½ - 88.9 316H-038-013 1.½ ¾ 101.6 76.2 316H-038-019 1.½ 1 88.9 76.2 316H-038-026 2 ½ - 139.7 316H-051-013 2 ¾ - 127.0 316H-051-019 2 1 111.1 127.0 316H-051-026 2 1.½ 88.9 76.2 316H-051-038 2.½ 1-177.8 316H-064-026 2.½ 1.½ 111.1 127.0 316H-064-038 2.½ 2 88.9 76.2 316H-064-051 3 1-228.6 316H-076-026 3 1.½ 133.4 177.8 316H-076-038 3 2 111.1 127.0 316H-076-051 3 2.½ 92.1 76.2 316H-076-064 4 1-333.4 316H-102-026 4 1.½ - 282.6 316H-102-038 4 2 158.8 231.8 316H-102-051 4 2.½ 136.5 181.0 316H-102-064 4 3 127.0 130.2 316H-102-076 6 3 215.9 190.5 316H-152-076 6 4 177.8 193.7 316H-152-102 DS SME PE Clamp Weld End Page No: 10

Clamp Eccentric Reducer - DT-21 (PE 2009) DT-4.1.3-3 (PE 2014) L1 L2 Part No ¾ ½ 79.4 50.8 316J-019-013 1 ½ 88.9 63.5 316J-026-013 1 ¾ 79.4 50.8 316J-026-019 1 ½ ½ - 88.9 316J-038-013 1 ½ ¾ 101.6 76.2 316J-038-019 1 ½ 1 88.9 76.2 316J-038-026 2 ½ - 139.7 316J-051-013 2 ¾ - 127.0 316J-051-019 2 1 111.1 127.0 316J-051-026 2 1 ½ 88.9 76.2 316J-051-038 2 ½ 1-177.8 316J-064-026 2 ½ 1 ½ 111.1 127.0 316J-064-038 2 ½ 2 88.9 76.2 316J-064-051 3 1-228.6 316J-076-026 3 1 ½ 133.4 177.8 316J-076-038 3 2 111.1 127.0 316J-076-051 3 2 ½ 92.1 76.2 316J-076-064 4 1-333.4 316J-102-026 4 1 ½ - 282.6 316J-102-038 4 2 158.8 231.8 316J-102-051 4 2.½ 136.5 181.0 316J-102-064 4 3 127.0 130.2 316J-102-076 6 3 215.9 190.5 316J-152-076 6 4 177.8 193.7 316J-152-102 DS SME PE Clamp Weld End Page No: 11

Clamp Ferrule utomatic Weld - DT-22 DT-4.1.4-1 (PE 2014) L Nominal Size (mm) (mm) C (mm) L1 L2 L3 C Part No L1 Part No L2 Part No L3 ¼ 25.0 4.57 6.35 44.50 28.70 12.70 316K-0064 316L-0064 316M-0064 ⅜ 25.0 7.74 9.52 44.50 28.70 12.70 316K-0095 316L-0095 316M-0095 ½ 25.0 9.40 12.70 44.50 28.70 12.70 316K-013 316L-013 316M-013 ¾ 25.0 15.75 19.05 44.50 28.70 12.70 316K-019 316L-019 316M-019 1 50.5 22.10 25.40 44.50 28.70 12.70 316K-026 316L-026 316M-026 1.½ 50.5 34.80 38.10 44.50 28.70 12.70 316K-038 316L-038 316M-038 2 64.0 47.50 50.80 57.20 28.70 12.70 316K-051 316L-051 316M-051 2.½ 77.5 60.20 63.50 57.20 28.70 12.70 316K-064 316L-064 316M-064 3 91.0 72.90 76.20 57.20 28.70 12.70 316K-076 316L-076 316M-076 4 119.0 97.38 101.60 57.20 28.70 15.90 316K-102 316L-102 316M-102 6 167.0 146.86 152.40 76.20 38.10 19.05 316K-152 316L-152 316M-152 DS SME PE Clamp Weld End Page No: 12

utomatic Weld 180 end ottom Outlet Clamp - DT-23.3 (PE 09) DT-4.1.1-7 (PE 2014) C D Part No C D ¾ ½ 114.30 57.15 95.25 25.40 317C-019-013 1 ½ 114.30 57.15 95.25 28.58 317C-026-013 1 ¾ 114.30 57.15 95.25 28.58 317C-026-019 1.½ ½ 152.40 76.20 114.30 34.93 317C-038-013 1.½ ¾ 152.40 76.20 114.30 34.93 317C-038-019 1.½ 1 152.40 76.20 114.30 34.93 317C-038-026 2 ½ 152.40 76.20 127.00 41.28 317C-051-013 2 ¾ 152.40 76.20 127.00 41.28 317C-051-019 2 1 152.40 76.20 127.00 41.28 317C-051-026 2 1.½ 152.40 76.20 127.00 41.28 317C-051-038 2.½ ½ 190.50 95.25 146.05 47.63 317C-064-013 2.½ ¾ 190.50 95.25 146.05 47.63 317C-064-019 2.½ 1 190.50 95.25 146.05 47.63 317C-064-026 2.½ 1.½ 190.50 95.25 146.05 47.63 317C-064-038 2.½ 2 190.50 95.25 146.05 47.63 317C-064-051 3 ½ 228.60 114.30 165.10 53.98 317C-076-013 3 ¾ 228.60 114.30 165.10 53.98 317C-076-019 3 1 228.60 114.30 165.10 53.98 317C-076-026 3 1.½ 228.60 114.30 165.10 53.98 317C-076-038 3 2 228.60 114.30 165.10 53.98 317C-076-051 3 2.½ 228.60 114.30 165.10 53.98 317C-076-064 4 ½ 304.80 152.40 215.90 66.68 317C-102-013 4 ¾ 304.80 152.40 215.90 66.68 317C-102-019 4 1 304.80 152.40 215.90 66.68 317C-102-026 4 1.½ 304.80 152.40 215.90 66.68 317C-102-038 4 2 304.80 152.40 215.90 66.68 317C-102-051 4 2.½ 304.80 152.40 215.90 66.68 317C-102-064 4 3 304.80 152.40 215.90 66.68 317C-102-076 Please Note: Special DT-23 s are usually made to order and are NON stock item Dimensions are guidelines and may be subject to change, please enquire to discuss your requirements before ordering. DS SME PE Clamp Weld End Page No: 13

utomatic Weld 180 end Side Outlet Clamp - DT-23.4 (PE 09) DT-4.1.1-7 (PE 2014) C D Part No C ¾ ½ 114.30 57.15 95.25 25.40 317D-019-013 1 ½ 114.30 57.15 95.25 28.58 317D-026-013 1 ¾ 114.30 57.15 95.25 28.58 317D-026-019 1.½ ½ 152.40 76.20 114.30 34.93 317D-038-013 1.½ ¾ 152.40 76.20 114.30 34.93 317D-038-019 1.½ 1 152.40 76.20 114.30 34.93 317D-038-026 2 ½ 152.40 76.20 127.00 41.28 317D-051-013 2 ¾ 152.40 76.20 127.00 41.28 317D-051-019 2 1 152.40 76.20 127.00 41.28 317D-051-026 2 1.½ 152.40 76.20 127.00 41.28 317D-051-038 2.½ ½ 190.50 95.25 146.05 47.63 317D-064-013 2.½ ¾ 190.50 95.25 146.05 47.63 317D-064-019 2.½ 1 190.50 95.25 146.05 47.63 317D-064-026 2.½ 1.½ 190.50 95.25 146.05 47.63 317D-064-038 2.½ 2 190.50 95.25 146.05 47.63 317D-064-051 3 ½ 228.60 114.30 165.10 53.98 317D-076-013 3 ¾ 228.60 114.30 165.10 53.98 317D-076-019 3 1 228.60 114.30 165.10 53.98 317D-076-026 3 1.½ 228.60 114.30 165.10 53.98 317D-076-038 3 2 228.60 114.30 165.10 53.98 317D-076-051 3 2.½ 228.60 114.30 165.10 53.98 317D-076-064 4 ½ 304.80 152.40 215.90 66.68 317D-102-013 4 ¾ 304.80 152.40 215.90 66.68 317D-102-019 4 1 304.80 152.40 215.90 66.68 317D-102-026 4 1.½ 304.80 152.40 215.90 66.68 317D-102-038 4 2 304.80 152.40 215.90 66.68 317D-102-051 4 2.½ 304.80 152.40 215.90 66.68 317D-102-064 4 3 304.80 152.40 215.90 66.68 317D-102-076 Please Note: Special DT-23 s are usually made to order and are a NON stock item Dimensions are guidelines and may be subject to change, please enquire to discuss your requirements before ordering. DS SME PE Clamp Weld End Page No: 14

Clamp Return end 180 - DT-24 (PE 2009) DT-4.1.1-8 (PE 2014) R R Part No ¼ 114.30 79.40 57.2 316P-0064 ½ 114.30 88.90 57.2 316P-013 ¾ 114.30 88.90 57.2 316P-019 1 76.20 88.90 57.2 316P-026 1.½ 114.30 127.00 76.2 316P-038 2 152.40 139.70 76.2 316P-051 2.½ 190.50 158.80 95.3 316P-064 3 228.60 177.80 114.3 316P-076 4 304.80 231.80 152.4 316P-102 6 457.20 330.20 228.6 316P-152 Clamp Short Outlet Tee - DT-25 (PE 2009) DT-4.1.2-3 (PE 2014) C C Part No ¼ 22.2 44.5 44.5 316Q-0064 ⅜ 22.2 44.5 44.5 316Q-0095 ½ 22.2 47.5 47.6 316Q-013 ¾ 25.4 50.8 50.8 316Q-019 1 28.6 54.0 54.0 316Q-026 1.½ 34.9 60.3 60.3 316Q-038 2 41.3 73.0 73.0 316Q-051 2.½ 47.6 79.4 79.4 316Q-064 3 54.0 85.7 85.7 316Q-076 4 69.9 104.8 104.8 316Q-102 6 117.5 142.9 142.9 316Q-152 DS SME PE Clamp Weld End Page No: 15

Clamp Weld Concentric Reducer - DT-26 (PE 2009) DT-4.1.3-2 (PE 2014) L1 L2 Part No ¾ ½ 66.7 76.2 316R-019-013 1 ½ 76.2 88.9 316R-026-013 1 ¾ 66.7 76.2 316R-026-019 1.½ ½ - 114.3 316R-038-013 1.½ ¾ 88.9 101.6 316R-038-019 1.½ 1 76.2 101.6 316R-038-026 2 ½ - 165.1 316R-051-013 2 ¾ - 152.4 316R-051-019 2 1 98.4 152.4 316R-051-026 2 1.½ 76.2 101.6 316R-051-038 2.½ 1-203.2 316R-064-026 2.½ 1.½ 98.4 152.4 316R-064-038 2.½ 2 76.2 108.0 316R-064-051 3 1-254.0 316R-076-026 3 1.½ 120.7 203.2 316R-076-038 3 2 98.4 158.8 316R-076-051 3 2.½ 79.4 108.0 316R-076-064 4 1-358.8 316R-102-026 4 1.½ - 308.0 316R-102-038 4 2 146.0 263.5 316R-102-051 4 2.½ 123.8 212.7 316R-102-064 4 3 114.3 161.9 316R-102-076 6 3 203.2 222.3 316R-152-076 6 4 161.9 228.6 316R-152-102 DS SME PE Clamp Weld End Page No: 16

Clamp Weld Eccentric Reducer - DT-26 (PE 2009) DT-4.1.3-2 (PE 2014) L1 L2 Part No ¾ ½ 66.7 76.2 316S-019-013 1 ½ 76.2 88.9 316S-026-013 1 ¾ 66.7 76.2 316S-026-019 1.½ ½ 114.3 316S-038-013 1.½ ¾ 88.9 101.6 316S-038-019 1.½ 1 76.2 101.6 316S-038-026 2 ½ 165.1 316S-051-013 2 ¾ 152.4 316S-051-019 2 1 98.4 152.4 316S-051-026 2 1.½ 76.2 101.6 316S-051-038 2.½ 1 203.2 316S-064-026 2.½ 1.½ 98.4 152.4 316S-064-038 2.½ 2 76.2 108.0 316S-064-051 3 1 254.0 316S-076-026 3 1.½ 120.7 203.2 316S-076-038 3 2 98.4 158.8 316S-076-051 3 2.½ 79.4 108.0 316S-076-064 4 1 358.8 316S-102-026 4 1.½ 308.0 316S-102-038 4 2 146.0 263.5 316S-102-051 4 2.½ 123.8 212.7 316S-102-064 4 3 114.3 161.9 316S-102-076 6 3 203.2 222.3 316S-152-076 6 4 161.9 228.6 316S-152-102 DS SME PE Clamp Weld End Page No: 17

Clamp Tee Short - DT-27 (PE 2009) DT-4.1.2-5 (PE 2014) Part No ¼ 57.2 25.4 316T-0064 ½ 57.2 25.4 316T-013 ¾ 60.3 28.6 316T-019 1 66.7 28.6 316T-026 1.½ 73.0 34.9 316T-038 2 85.7 41.3 316T-051 2.½ 92.1 47.6 316T-064 3 98.4 54.0 316T-076 4 120.7 69.9 316T-102 6 181.0 117.5 316T-152 utomatic Instrument Tee - DT-28 (PE 2009) DT-4.1.2-10 (PE 2014) Part No ½ 1.½ 63.5 22.2 316V-013-038 ¾ 1.½ 63.5 25.4 316V-019-038 1 1.½ 63.5 28.6 316V-026-038 ½ 2 69.9 25.4 316V-013-051 ¾ 2 69.9 28.6 316V-019-051 1 2 69.9 31.6 316V-026-051 1.½ 2 69.9 38.1 316V-038-051 DS SME PE Clamp Weld End Page No: 18

Clamp Instrument Tee DT-29 (PE 2009) DT-4.1.2-11 (PE 2014) Part No ½ 1.½ 76.2 22.2 316W-013-038 ¾ 1.½ 76.2 25.4 316W-019-038 1 1.½ 76.2 28.6 316W-026-038 ½ 2 82.6 25.4 316W-013-051 ¾ 2 82.6 28.6 316W-019-051 1 2 82.6 31.8 316W-026-051 1.½ 2 82.6 38.1 316W-038-051 Clamp lank End Cap - DT-31 (PE 2009) DT-4.1.5-2 (PE 2014) Part No ½ 25.40 4.71 316-013 ¾ 25.40 4.72 316-019 1 50.50 6.40 316-026 1.½ 50.50 6.40 316-038 2 64.00 6.40 316-051 2.½ 77.50 6.40 316-064 3 91.00 6.40 316-076 4 119.00 7.90 316-102 6 167.00 11.10 316-152 DS SME PE Clamp Weld End Page No: 19