www.kaleta.pl PLASTERING UNITS Branded manufacturer of equipment for construction
SPRAY APPLIED PLASTERS Plastering units used for spray applied plasters (cement-lime, lime-gypsum and special plasters as well as self-levelling compounds). Type KALETA 5 Basket motor 900 mm 720 mm 1500 mm 900 mm 250 kg 135 kg 1,1 kw/45 rpm Cooperates with a silo Type KALETA 5S Basket motor Compressor Kaleta 900 mm 720 mm 1500 mm 900 mm 250 kg 135 kg 1,1 kw/45 rpm 250 l/min Worm pump Cooperates with a silo 2
Type KALETA 4 Type KALETA 4S * Compressor Kaleta 1580 mm 670 mm 950 mm 160 kg 75 kg up to 20 m 250 l/min Compressor Kaleta for unit type Kaleta 4S No cooperation with a silo Type KALETA 3 Type KALETA 3S Basket motor Compressor Kaleta 750 mm 1550 mm 1025 mm 220 kg 145 kg /min 1,1 kw/36 rpm 250 l/min Compressor Kaleta for unit type Kaleta 3S Cooperates with a silo Typ. KALETA 2 Basket motor 720 mm 1570 mm 980 mm 220 kg 100 kg 1,1 kw/36 rpm Cooperates with a silo. 1 szt. 3
Type KALETA 1 960 mm 700 mm 1300 mm 1050 mm 160 kg 45 kg up to 20 m No cooperation with a silo UNIT WITH POWER SUPPLY 230 V FOR SPRAY APPLIED PLASTER Plastering unit with single-phase power supply used for spray applied plasters (cement-lime, lime-gypsum, special plaster and self-levelling compounds). Type KALETA 4/230 Type KALETA 4/230S Max output P Compressor Kaleta Voltage 1580 mm 670 mm 950 mm 160 kg 75 kg 25 l/min up to 20 m 3,5 kw/230 V 250 l/min 230 V 230 V 50 Hz FIT Compressor Kaleta for unit type Kaleta 4/230S *Output and supply distance depends on the plastering mix and pump type D No cooperation with a silo 4
UNIT FOR SPRAYING GYPSUM FINISH Unit used for application of mineral and acryl putties, structural plasters, adhesives, finishing surfaces, insulation systems, fire protections. Type KALETA 151 Voltage Fuses Connection cable Motor power (variable rev.) *max output Max pressure Max grain size *max distance Dimensions Tank capacity Compressor 230V/50 Hz 25 A 3x1,5 mm² 2,2 kw 20 l/min 30 bar 4 mm up to 20 m 1190x540x670 60 litres 110 kg 1,5 kw 390 l/min Tank 60 L of stainless steel Trolley set Compressor Control Panel Mortal hose 25 12,5 Spray nozzle 4,6,8,10, flat Worm jacket D4-3 Super Klucz płaski 1 set 1 set *Capacity and supply distance depends on the type of pump and revolutions 5
TRADITIONAL PLASTERS Plastering unit used for mixes prepared on the grounds of a bases of graining up to 6 mm (cement-lime, lime-gypsum and special plasters as well as self-levelling compounds and cement-lime compounds). Type KALETA 150 Volume Max delivery heigh Voltage Graining 2100 mm 750 mm 930 mm 530 mm 100 l 200 kg 20-80 l/min 10 m 350 l/min /50 Hz 5,5 kw 6 mm 35 12,5 Worm pump 2L6 *Output and supply distance depends on the plastering mix and smooth regulation of revolutions as well as on pump type R or 2L6 6 30 m 30 m
SILO KALETA 140 Silo (pneumatic conveyor system) is an automated device to apply dry plastering material from silo to plastering unit Type KALETA 140 Total weight Compressor power Pressure Motor power Voltage 560 mm 650 mm 345 kg 140 m3/h 2,5 bar 7,5 kw /50 Hz Claw (type) compressor Conveyor receiver (silomat bell) Probe (sensor) 70 l 3m 42 V Additional equipment optional 50 m 50 m 2x25 m Duct probe 3x1,5 complete Power cable 5x2,5 complete Hose for dry material Cover of silomat for plastering unit Vibrator BASIC COLOUR: SILVER EXAMPLES OF COLOUR AVAILABLE ON SPECIAL REQUEST WHITE ORANGE NAVY BLUE RED GREEN 7
www.kaleta.pl www.kaleta.pl Construction Devices Production Plant - KALETA Z.P.U.B Kaleta Aleksandrowice 153 32-084 Aleksandrowice k/krakowa Polska NIP: PL 945 125 19 09 tel./fax: +48 12 415 21 34 e-mail: biuro@kaleta.pl Skype: kaleta-poland Orders: kaletaexport@kaleta.pl zamowienia@kaleta.pl Service: +48 602 639 600 Customer service office - e-mail: bok@kaleta.pl tel./fax: +48 12 415 21 34 +48 12 665 40 19 Internet shop: www.kaletasklep.pl SALES SHOPS KALETA Service branch in Cracow ul. 29 Listopada 193 31-241 Kraków phone/fax: +48 12 418 15 25 e-mail: kaletaserwis.kr@kaleta.pl skype: kaleta_serwis_krakow nr konta: 94 1020 2906 0000 1402 0207 2064 KALETA Service branch in Lublin ul. Pogodna 50A 20-337 Lublin phone/fax: +48 81 444 24 00 e-mail: kaletaserwis@kaleta.pl skype: kaleta_serwis_lublin nr konta: 72 1020 2906 0000 1102 0207 2122 KALETA Service branch in Warsaw ul. Jana Kazimierza 30/lok. 3 01-248 Warszawa phone/fax: +48 22 408 78 70 e-mail: kaletaserwis.war@kaleta.pl skype: kaleta_serwis_warszawa nr konta: 39 1020 2906 0000 1502 0252 0757 KALETA Service branch in Wrocław ul. Przyjaźni 34D 53-030 Wrocław phone/fax: +48 71 339 47 36 e-mail: kaletaserwis.wro@kaleta.pl skype: kaleta_serwis_wroclaw nr konta: 02 1020 2906 0000 1202 0207 2072