TECNODECK SHADE SAILS EN - Tecnodeck 04/2017 - Tecnodeck ALL RIGHTS RESERVED
TECNODECK SHADE SAILS TECNODECK SHADE SAILS allows the perfect combination with the Tecnodeck Pergola System or with the use of Architectural Profiles to create shading systems or sun protection. TECNODECK SHADE SAILS Tensioned Sail System Produced with a high quality fabric - Sunworker. A peripheral steel cable and a steel disc connection will ensure a long life of the system. TECNODECK SHADE SAILS Weave Sail Shade System The simple and economic shade system for solar protection, produced with high quality fabric - Sunworker. TECNODECK www.tecnodeck.net
TECNODECK SHADE SAILS HIGH QUALITY FABRICS FOR OUTDOOR USE TECNODECK SHADE SAILS are produced with fabrics of the european manufacturer Dickson - Constant, suported with a 5 or 10 years warranty. SUNWORKER FABRIC - Characteristics Composition: 100% High performance polyester. Weight: 320 g/m2 Warranty: 5 years (information at www.dickson-constant.com) SUNWORKER COLORS * SWK M719 - TAUPE SWK M006 - PEARL SWK M654 - GREY SWK M652 - SILVER SWK M391 - BLACK * Other colors avaible under request USE, MANTENANCE AND CLEANNING The fabrics have the resistance to withstand outdoor weather conditions. In the possibility of stormy weather it is advisable to dismount the sails.. In dry conditions, use a vacuum cleaner or an air blower, shake or use a soft brush.. To clean stains use a soapy water solution.. To remove water stains use a soft humide cloth. Never use abrasive detergents, cleaning chemical produts and abrasive tools. Complete information at www.dickson-constant.com TECNODECK www.tecnodeck.net
TECNODECK SHADE SAILS SUNWORKER Solar protection TECHNICAL SHEET This product s values may vary with a tolerance of ± 5% CHARACTERISTICS VALUES WARP WEFT UNITS STANDARDS GENERAL CHARACTERISTICS Openess factor 6 Thickness Weave Finish 0,42 Rachel Trameur Enduction PVC double face Composition 100% polyester haute ténacité Angular deviation Weight Width 2 320 150 300 Cut length 60 30 FABRIC RESISTANCE % mm % g/m cm ml 2 EN 14500 ISO 2286-3 ISO 7211-1 NFG 07-163 ISO 3801 EN 1773 Tear strength C1 43 22 dan UNI 9176 DIN 53.363 Tensile strength Euroclasse 220 B s2 d0 150 dan ISO 13934-1 EN 13501-1 Acoustic absorption Class E ISO 354 M1 NF P 92 503 B1 DIN 4102 Class 1 UNE-EN 1377 COLOUR - FASTNESS Colour fastness UV - outdoor Colour fastness UV - indoor 3-4 6 class /5 class /8 ISO 105 B04 ISO 105 B02 USES Temperature of use Guarantee Recommended use -30 >> +70 5 Cº years Drop arm awning, Folding arm awning, Exterior velum, Conservatory blind, Sail shade, Separation panel, Vertical blind, Pergola, Screen pergola Update 07-05-2015 Version 8.1 WARRANTY YEARS F I R E RETARDANT
www.tecnodeck.net SHADE SAILS V.01/2017 Weave Sail System 3x3 Code: PC300 Solid Aluminium Profile (20x5mm). Ø 5mm holes. 10 un. Solid Aluminium Profiles. 5 un. Fabric 50 Roll the bar to tension the fabric. Fabric. Aluminium Bar. Pre-drill the WPC, with a diameter 3mm bigger than the screw diameter. 595 297,5 Weave Sail System 4x4 Code: PC400 Solid Aluminium Profile (20x5mm). Ø 5mm holes. 14 un. Solid Aluminium Profiles. 7 un. Fabric. 50 Roll the bar to tension the fabric. Fabric. Aluminium Bar. Pre-drill the WPC, with a diameter 3mm bigger than the screw diameter. 565 282,5 IMPORTANT INSTALLATION NOTICE: The holes in the Composite profile must always be pre-drilled with a diameter 3mm bigger than the screw diameter.
www.tecnodeck.net SHADE SAILS V.01/2017 Tensioned Sail System 3x3 Code: TSS300 4 un. Stainless Steel Corner for fixing to the pergola 4 un. Stretchers. 1 un. Fabric. Remove Screw M8X12 1 from Orthogonal Union. 2 Insert Tecnodeck Tensioning Eye Union. Insert Screw M8X12 3 4 in Orthogonal Union. Insert and tensioning the Sail Tensor. Tensioned Sail System 4x4 Code: TSS400 4 un. Stainless Steel Corner for fixing to the pergola 4 un. Stretchers. 1 un. Fabric. Remove Screw M8X12 1 from Orthogonal Union. 2 Insert Tecnodeck Tensioning Eye Union. Insert Screw M8X12 3 4 in Orthogonal Union. Insert and tensioning the Sail Tensor.