Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection Any number of extension platforms can be screwed together Normally the base platform should be the finishing element by assembly Base Platform Extension Platform Base Platform Extension Platform 814050 + 814081 814050 + 814081 Height mm 800 x 800 1000 x 1000 Ca. weight in kg 40,0 46,0 814050 814067 Height mm 400 x 800 800 x 800 500 x 1000 1000 x 1000 Ca. weight in kg 16,0 34,5 21,0 47,5 814074 814081 814098 814104 Crossover Exit railing Exit Railing Steel-galvanized grating 800 mm deep Descending ladder 980 mm Cutting of to length Recommendation: Use wall anchors or foot plates at the end of the descend Length 500 mm With base angles Single stile extension Angled Ladder with exit rails and two pcs. 814159 Abb. Two pcs. Art.- No. 814197 with ladder Aluminum, anodized 814111 Aluminum, natural 814128 814135 814142 Aluminum, anodized 814159 Aluminum, natural 814166 814173 814180 Aluminum, anodized 814197 Aluminum, natural 814203 814210 814227
Accessories Exit Step Made of perforated plate The top rung may be enlarged to a convenient standing area measuring ca. 150 x 520 mm Platform, foldable Suitable for use as fall protection and rest platform 150 520 814234 814289 814241 Foot Plate Access Ladder For mounting the ladder to the floor 120 x 120 mm Bore hole diameter: Ø 14 mm 150 Rung ladder Can be hooked Can be locked Ladder length 2.50 m 814296 814302 90 120 8142 Security Door With access barrier on upper end Can be locked with padlock (not supplied, must be provided by customer) Emergency Exit Ladder Rung ladder Automatical ladder release from the top Length to floor 2.50 m 400 814272 814258 450
Accessories Wall Anchor, rigid Other sizes available on request 230 150 200 mm 150-200 813312 813381 630 814319 814326 0 275 375 mm 814357 814364 275-375 16 100 x 100 16 420 200 275 mm 814333 814340 200-275 0 Hand Rail With screwing plates Wall Anchor, Rigid Wall clearance 500 mm Length in mm 400 600 814388 814395 Length in mm 400 600 814401 814418 Safety Barrier Self-locking With red shrinking tube Can be screwed to ladder rails or to exit side rail Length 212542 Connecting Brace To be mounted between the railing of the base or the extension platform and the climbing ladder in order to close the gap Length 600 mm, brace must be cut on site 212849 Connecting Brace To strengthen the ladder parts if the distance of the wall anchors on site is less than the prescribed 2 meters 1000 mm length, two pieces per ladder are required 814371 212856
Access aids In accordance with DIN 19 572 (holding devices for shafts) and BGV C5 (waste water systems), step iron ladders must have a holding device at their exit point in order to ensure safe entry and exit, e.g. hand bars or hand rails. The products listed below are in compliance with the specifications of DIN 19 572. Holding Bar with two handles Made of stainless V4A (1.4571), pickled and passivated Highly economical due to mobile use: Only the sleeve remains fixed in the shaft. Insert Sleeve Made of stainless V4A (1.4571), pickled and passivated (round model) or galvanized (square model). Suitable for access aid, Art. No. 816405 Length in m 1,60 Weight kg 3,5 816405 Weight kg 1,1 1,1 816405 816412 816429 816412, 816429 Holding Bar with one handle Made of stainless V4A (1.4571), pickled and passivated or galvanized Can be lowered for wall attachment Complete with insert sleeve Holding Bar with one handle Made of stainless V4A (1.4571), pickled and passivated or galvanized Can be lowered for attachment to the ladder rails, sizes 50x20 to 60x25 mm (not suitable for glassfibre reinforced shaft ladders) Complete with insert sleeve 816450 Length in m 1,50 1,50 Weight kg 4,5 4,5 816436 816443 816443 Length in m 1,50 1,50 Weight kg 5,0 5,0 816450 816467 Holding Frame Made of stainless V4A (1.4571), pickled and passivated or galvanized Can be lowered, complete with fittings for ladder rail 50x20 mm, for ladder outer width of 340 mm and 440 mm Ladder width mm 340 340 Length m 1,10 1,10 816474 816481 Ladder width mm 440 440 Length m 1,10 1,10 816498 8104 816474 Accessories Express Anchor To attach the sleeves to the shaft wall, we recommend express anchors (approved by building authorities); minimum concrete thickness is 220 mm 8111 For current product information, please refer to the various country-specific websites under www.krause-systems.com
Fall Protection Systems Fall Protection Rail with connecting link Plug-In Rail Device 1,96 2,80 8128 8135 8142 1,96 2,80 8159 8166 8173 Länge m 1,40 1,96 2,80 Aluminium 8180 8197 816603 or ladder rungs For the attachment of fall protection rails to ladders Attachment distance 1.68 m; for shorter ladders, at least 4 attachment points are required Material Steel, galv. Stainl. V4A 816610 816627 for ladder rail For access aids, to be screwed to the top rail 816719 Rail Lock Execution Rigid Detachable 816726 816733 Rail Shunt For lateral exit and changing from horizontal to vertical position For lateral attachment Rail size mm 50 x 20 60 x 25 816634 816641 Rail size mm 50 x 20 60 x 25 Stainl. V4A 8168 8166 for stirrup For rung distances of more or less than 280 mm Material Steel, galv. Stainl. V4A 816740 816757 Safety Runner With snap hook Smooth operation without any sharp corners and edges Stainless- tongue Material Steel, galv. Stainl. V4A 816672 816689 816764 Access Aid Plug-in, can be rotated with handles and equipped with rotation lock Safety Belt In accordance with EN 361 Made of tear-resistant nylon straps 816696 Stainl. V4A 816702 816771