Revision date : 2013/12/17 Page: 1/6 1. Product and Company Identification Company BASF Canada Inc. 100 Milverton Drive Mississauga, ON L5R 4H1, CANADA 24 Hour Emergency Response Information CANUTEC (reverse charges): (613) 996-6666 BASF HOTLINE: (800) 454-COPE (2673) 2. Hazards Identification Emergency overview IRRITANT. MAY CAUSE EYE IRRITATION. MAY CAUSE SKIN IRRITATION. CONTAINS MATERIAL WHICH MAY CAUSE CANCER. State of matter: liquid Colour: dark brown Odour: odourless Potential health effects Acute toxicity: Ingestion may cause gastrointestinal disturbances. The product has not been tested. The statement has been derived from the properties of the individual components. Chronic toxicity: Carcinogenicity: Contains a suspect carcinogen. Repeated dose toxicity: The substance may cause damage to the upper respiratory tract after repeated inhalation, as shown in animal studies. Repeated oral exposure may affect certain organs. May affect the liver and kidneys as indicated in animal studies. The product has not been tested. The statement has been derived from the properties of the individual components. Reproductive toxicity: The chemical structure does not suggest a specific alert for such an effect. Based on available Data, the classification criteria are not met. Teratogenicity: The chemical structure does not suggest a specific alert for such an effect. Based on available Data, the classification criteria are not met.
Revision date : 2013/12/17 Page: 2/6 Genotoxicity: The chemical structure does not suggest a specific alert for such an effect. Based on available Data, the classification criteria are not met. Signs and symptoms of overexposure: The most important known symptoms and effects are described in the labelling (see section 2) and/or in section 11. Potential environmental effects Aquatic toxicity: Based on available Data, the classification criteria are not met. There is a high probability that the product is not acutely harmful to aquatic organisms. Bioaccumulation / bioconcentration: Discharge into the environment must be avoided. 3. Composition / Information on Ingredients CAS Number Content (W/W) Hazardous ingredients 102-71-6 >= 3.0 - <= 7.0 % 2,2',2"-nitrilotriethanol 111-42-2 >= 0.1 - <= 1.0 % 2,2'-iminodiethanol 4. First-Aid Measures General advice: First aid personnel should pay attention to their own safety. Remove contaminated clothing. If inhaled: If difficulties occur after vapour/aerosol has been inhaled, remove to fresh air and seek medical attention. If on skin: After contact with skin, wash immediately with plenty of water and soap. Under no circumstances should organic solvent be used. If irritation develops, seek medical attention. If in eyes: Wash affected eyes for at least 15 minutes under running water with eyelids held open, consult an eye specialist. If swallowed: Rinse mouth immediately with water. Seek medical attention if necessary. Do not induce vomiting unless told to by a poison control center or doctor. 5. Fire-Fighting Measures Flash point: Autoignition: Lower explosion limit: Non-flammable. not applicable not applicable Suitable extinguishing media: foam, water spray, dry powder, carbon dioxide Unsuitable extinguishing media for safety reasons: water jet Hazards during fire-fighting: carbon monoxide, carbon dioxide, harmful vapours, nitrogen oxides, fumes/smoke, carbon black
Revision date : 2013/12/17 Page: 3/6 Protective equipment for fire-fighting: Wear a self-contained breathing apparatus. Further information: The degree of risk is governed by the burning substance and the fire conditions. Contaminated extinguishing water must be disposed of in accordance with official regulations. 6. Accidental release measures Personal precautions: Use personal protective clothing. Do not breathe vapour/aerosol/spray mists. Handle in accordance with good building materials hygiene and safety practice. Environmental precautions: Contain contaminated water/firefighting water. Do not discharge into drains/surface waters/groundwater. Cleanup: For small amounts: Pick up with inert absorbent material (e.g. sand, earth etc.). Dispose of contaminated material as prescribed. For large amounts: Pump off product. 7. Handling and Storage Handling General advice: Avoid aerosol formation. Avoid inhalation of mists/vapours. Avoid skin contact. No special measures necessary provided product is used correctly. Protection against fire and explosion: The product does not contribute to the spreading of flames, nor is it self combustible, not explosive. Storage General advice: Keep only in the original container in a cool, well-ventilated place. Protect from direct sunlight. Store protected against freezing. Temperature tolerance Protect from temperatures below: 5 C The packed product must be protected from temperatures below the indicated one. 8. Exposure Controls and Personal Protection Components with occupational exposure limits 2,2'-iminodiethanol ACGIH TLV TWA value 1 mg/m3 Inhalable fraction and vapor ; Skin Designation Inhalable fraction and vapor ; The substance can be absorbed through the skin. Personal protective equipment Respiratory protection: When workers are facing concentrations above the occupational exposure limits they must use appropriate certified respirators. Hand protection: Wear chemical resistant protective gloves.
Revision date : 2013/12/17 Page: 4/6 Eye protection: Safety glasses with side-shields. Body protection: depending upon conditions of use., Cover as much of the exposed skin as possible to prevent all skin contact., light protective clothing General safety and hygiene measures: Avoid contact with the skin, eyes and clothing. In order to prevent contamination while handling, closed working clothes and working gloves should be used. Handle in accordance with good building materials hygiene and safety practice. When using, do not eat, drink or smoke. Hands and/or face should be washed before breaks and at the end of the shift. At the end of the shift the skin should be cleaned and skin-care agents applied. Gloves must be inspected regularly and prior to each use. Replace if necessary (e.g. pinhole leaks). 9. Physical and Chemical Properties Form: liquid Odour: odourless Odour threshold: No data available. Colour: dark brown ph value: 6-11 Boiling point: 120 C Vapour pressure: The product has not been tested. Density: 1.125-1.155 ( 25 C) g/cm3 Solubility in water: soluble Miscibility with water: completely (e.g. >=90%) Solubility in other solvents: soluble 10. Stability and Reactivity Conditions to avoid: Avoid extreme temperatures. Substances to avoid: strong acids, strong bases, strong oxidizing agents Hazardous reactions: The product is stable if stored and handled as prescribed/indicated. Decomposition products: carbon oxides, nitrogen oxides Thermal decomposition: No decomposition if stored and handled as prescribed/indicated. Oxidizing properties: Based on its structural properties the product is not classified as oxidizing. 11. Toxicological information Acute toxicity Assessment of acute toxicity: Of moderate toxicity after single ingestion. Virtually nontoxic after a single skin contact. The substance can be absorbed through the skin. Inhalation-risk test (IRT): The inhalation of a highly saturated vapor-air-mixture represents no acute hazard (mortality after an hour or later).
Revision date : 2013/12/17 Page: 5/6 Irritation / corrosion Assessment of irritating effects: Skin contact causes irritation. May cause severe damage to the eyes. Repeated dose toxicity Assessment of repeated dose toxicity: Repeated oral exposure may affect certain organs. The substance may cause damage to the upper respiratory tract after repeated inhalation, as shown in animal studies. Carcinogenicity IARC (International Agency for Research on Cancer) has classified this substance as group 2B (The agent is possibly carcinogenic to humans). Other Information: Based on our experience and the information available, no adverse health effects are expected if handled as recommended with suitable precautions for designated uses. The product has not been tested. The statements on toxicology have been derived from the properties of the individual components. 12. Ecological Information Degradability / Persistence Biological / Abiological Degradation Evaluation: Inherently biodegradable. The insoluble fraction can be removed by mechanical means in suitable waste water treatment plants. Other adverse effects: Ecological data are not available. Do not allow to enter soil, waterways or waste water channels. 13. Disposal considerations Waste disposal of substance: Recommendations: Use excess product in an alternate beneficial application. Dispose of in accordance with local authority regulations. Do not discharge into drains/surface waters/groundwater. Container disposal: Contaminated packaging should be emptied as far as possible; then it can be passed on for recycling after being thoroughly cleaned. 14. Transport Information
Revision date : 2013/12/17 Page: 6/6 Land transport TDG Not classified as a dangerous good under transport regulations Sea transport IMDG Not classified as a dangerous good under transport regulations Air transport IATA/ICAO Not classified as a dangerous good under transport regulations 15. Regulatory Information Federal Regulations Registration status: Chemical DSL, CA released / listed WHMIS classification: D2A: Materials Causing Other Toxic Effects - Very toxic material THIS PRODUCT HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE HAZARD CRITERIA OF THE CPR AND THE MSDS CONTAINS ALL THE INFORMATION REQUIRED BY THE CPR. 16. Other Information We support worldwide Responsible Care initiatives. We value the health and safety of our employees, customers, suppliers and neighbors, and the protection of the environment. Our commitment to Responsible Care is integral to conducting our business and operating our facilities in a safe and environmentally responsible fashion, supporting our customers and suppliers in ensuring the safe and environmentally sound handling of our products, and minimizing the impact of our operations on society and the environment during production, storage, transport, use and disposal of our products. SDS Prepared by: BASF NA Product Regulations msds@basf.com BASF HOTLINE (800) 454 COPE (2673) SDS Prepared on: 2013/12/17 END OF DATA SHEET