Norma: HRN EN ISO/IEC 17025:2007 Standard:(ISO/IEC 17025:2005+Cor.1:2006; EN ISO/IEC 17025:2005+AC:2006)

Similar documents
LABORING d.o.o. za mjeriteljstvo i ispitivanje Virjanska 22, HR Zagreb

LABORING d.o.o. za mjeriteljstvo i ispitivanje Virjanska 22, HR Zagreb

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

Interlaboratory comparison in the pressure range from 0 to 2 MPa for accredited calibration laboratories

CALIBRATION SERVICES HUMIDITY DEW POINT AIR VELOCITY MASS FLOW TEMPERATURE CO 2 PRESSURE. (+34)

Performance Overview calibration Laboratory EP Instruments Messtechnik und Kalibrierung GmbH

MET-101 Introduction to Metrology

ISO Vacuum gauges Calibration by direct comparison with a reference gauge

Vaisala Pressure, RH & Temp. Transmitter. The instrument was operational upon receipt. The instrument was adjusted and calibrated.

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF PRESSURE METROLOGY

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

IDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05

Aluminium, white with black lettering. Bar. Option with unit bar/pa, bar/psi, kpa, MPa, psi

PRILOGA K AKREDITACIJSKI LISTINI Annex to the accreditation certificate K-003

tradition. knowledge. responsibility. CALIBRATION OF ELECTRICAL MEASUREMENT EQUIPMENT CALIBRATION LABORATORY

EN ISO/IEC Technical Requirements

DM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

THE INSIDE STORY OF THE F-SERIES:

Product Catalogue. P-SERIES Pressure Gauges

FPG8601 Force Balanced Piston Gauge

DM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05

Specific Accreditation Criteria Calibration ISO IEC Annex. Mass and related quantities

NMISA NEW GAS FLOW CALIBRATION FACILITY. Deona Jonker 7 October 2013

ISO 6570 INTERNATIONAL STANDARD. Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods

TEMPERATURE FIELD INSIDE THE DIAPHRAGM GAS METER

UKAS calibration laboratory 8809 Temperature, pressure and electrical signals calibration guide

GUIDANCE FOR THE APPLICATION OF EQUIPMENT CALIBRATION AND TRACEABILITY OF MEASUREMENTS ON INSPECTION BODIES

ETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05

Digital Pressure Gauge Main features: Data Sheet: BIT02B.417.R6.EN COVER on request

GMC-I Service GmbH Calibration Center

PPC4E Pressure Controller/Calibrator Superior rangeability and reliability

PRESSURE TRANSDUCERS WITH UNIFIED (4-20) ma OR (10-50) ma OUTPUT SIGNAL

MET 335W Fluid Mechanics Laboratory. Lab 1: Bourdon Tube Calibration. Nick Peak

Variable Area Flow Meters. VS Series

NMISA New Gas Flow Calibration Facility

Pressure calibration equipment

Guide on static dilution method for NO, NO 2 and SO 2 at limit values

CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)

P3000 Series. Pneumatic Deadweight Testers Model P3000. Technical Data. Features

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION

Additel 761 Automated Pressure Calibrators

CALIBRATION CERTIFICATE # 500

Hand-held pressure calibrator with integrated pump Model CPH6600

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

Environmental Gasket Company Ltd. 309 Hanzhongmen Ave. Nanjing, PR China. 13EGC-MPA /Hh/Mor/Scr Fishbone Gasket

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z

INTERNATIONAL EXPLANATION OF CONTACT FUNCTIONS. English. Deutsch. Français. Italiano. Español

SPD310/SPD360 Air Differential

Air Pressure Test to EN13829:2000

High-performance submersible pressure transmitter For level measurement Model LH-10

Pressure Metrology in Mexico

HUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0

ISO 2944 INTERNATIONAL STANDARD. Fluid power systems and components Nominal pressures. Transmissions hydrauliques et pneumatiques Pressions nominales

Pneumatic dead-weight tester Model CPB3500

Series Ruska Digital Pressure Indicator. GE Sensing & Inspection Technologies. Features

2014 Programme of Training Courses in Measurement & Calibration

PG7000 high line differential mode for defining differential pressure at line pressures above atmospheric pressure (PG7000 V2.

Service ISO17025 explained

Pressure Measurement

PRESSURE MONITORING ND SAFETY SYSTEMS. Davor ZVIZDIC, Lovorka GRGEC BERMANEC FSB-LPM, Zagreb, Croatia.

K V A L I F I K. Our accreditation number: NAH /2015. Valid to:

How to specify a product. Process Sensors and Mechanical Instruments

Additel 761 Automated Pressure Calibrators Selection Guide

Additel 761 Automated Pressure Calibrators

Unique mounting features for Thermal Mass Flow Meters. By Martin Raab in cooperation with CaTeC b.v.

D e s c r i p t i o n

ISO INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using high viscosity fluid

2600T Series Pressure Transmitter Models 264DC Differential and 264HC Gage Level Transmitters. Kent-Taylor

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z TROXLER ELECTRONICS LABORATORIES, INC. James Pratt Phone:

Pressure is our Business

Additel 761 Automated Pressure Calibrators Selection Guide

Certificate of Accreditation

Programmable pressure and temperature transmitters PTM/RS485

Model NDA Differential pressure transmitter. Deltapi N Series A complete range of pneumatic pressure transmitters

Pneumatic High-Speed Pressure Controller Model CPC3000

Pressure Measurements

ISO 3724 INTERNATIONAL STANDARD. Hydraulic fluid power Filter elements Determination of resistance to flow fatigue using particulate contaminant

BDT20 Safety process pressure gauge 100 & 160mm

Customer Responsibilities

Digital pressure gauge Model CPG500

Calibration Technology

ISO INTERNATIONAL STANDARD. Flow-metering devices for connection to terminal units of medical gas pipeline systems

56 LESLIE HOUGH WAY SALFORD GREATER MANCHESTER M6 6AJ UNITED KINGDOM. Tel: +44 (0) Fax: +44 (0)

P3000 Series. Pneumatic Deadweight Testers Model P3000. Technical Data. Features

High-performance submersible pressure transmitter For level measurement Model LH-10

EAL-G26 EA EAEuropean

Gas flow calibrations performed at the National Metrology Institute of South Africa (NMISA)

Guide No. 2/2009. Design, training and equipment Martin Firlus. Physikalisch Technische Bundesanstalt Braunschweig und Berlin

Heading 10 NEW. Calibration Technology Pressure. ARMATURENBAU GmbH MANOTHERM Beierfeld GmbH

Technical Datasheet. Oxygen Generator Systems

Orifice Plate Flow Meter

ISC40G(S) with external

High-speed pressure sensor Model CPT6140

ED 701 Hygenic Pressure Transmitter

VT900A + VAPOR. Technical data. One Solution. Auto-detection to Ensure Patient Safety. Key benefits and features

CERTIFICATE on measurement instruments type approval

Transcription:

PRILOG POTVRDI O AKREDITACIJI br.: No.: Klasa/Ref. No.: 383-02/07-80/013 Urbroj/Id. No.: 569-02/4-10-30 Datum izdanja riloga /Annex Issued on: 2010-12-29 Zamjenjuje rilog/relaces Annex: Klasa/Ref. No.: 383-02/07-80/013 Urbroj/Id. No.: 569-02/4-08-33 Datum/Date: 2008-07-21 Norma: HRN EN ISO/IEC 17025:2007 Standard:(ISO/IEC 17025:2005+Cor.1:2006; EN ISO/IEC 17025:2005+AC:2006) Akreditacija istječe: 2013-07-20 Accreditation exiry: Prva akreditacija: 2008-07-21 Initial accreditation: Akreditirani laboratorij Accredited laboratory STSI INTEGRIRANI TEHNIČKI SERVISI d.o.o. Lovinčićeva bb, HR-10000 Zagreb LABORATORIJ SLUŽBE TEHNIČKE KONTROLE SEKTORA INDUSTRIJSKIH SERVISA LAB-SIS 10313 Ivanićko Graberje Područje akreditacije: Scoe of accreditation: Umjeravanje mjerila tlaka i mjerila temerature of ressure gauges and temerature gauges Važeće izdanje Priloga dostuno je na web adresi: www.akreditacija.hr / Valid issue of the Annex is available at the web address: www.akreditacija.hr Ravnateljica: Director General: mr. sc. Biserka Bajzek Brezak, dil. ing. HAA-Ob-7/7-2/2 /Izdanje 6/Issue 6 stranica/age 1 od/of 4

Prilog otvrdi o akreditaciji Datum izdanja riloga/ Annex Issued on 2010-12-29 Zamjenjuje rilog od/relaces Annex dated: 2008-07-21 PODRUČJE AKREDITACIJE / SCOPE OF ACCREDITATION 1. veličina/ Temeratura/ Otornički termometri, termometri s direktnim okazivanjem, termometri s ugrađenim retvornikom temerature Temerature/ Resistance s, Thermometers with direct dislay, s with built-in temerature transmitter Mjerno odručje sosobnost* caability* 20 do/to + 100 0,15 K > 100 do/to + 400 > 400 do/to + 850 1,4 K 1,8 K DKD R 5-1:2003 Naomene Usoredba s otorničkim Comarison Usoredba s termoarom Comarison thermocoule 20 do/to + 100 0,3 K Usoredba s otorničkim Temeratura/ Termoelementi > 100 do/to + 400 2 K 08/ v.01:2007 Comarison 2. Temerature/ Thermocoules > 400 do/to + 850 2,4 K Usoredba s termoarom Comarison thermocoule 3. Temeratura/ Indikatori i simulatori za otorničke termometre Temerature/Indi cators and simulators for s -200 do/to 850 200 mk 11/ v.01:2007 HAA-Ob-7/7-2/2 / Izdanje 6/Issue 6 stranica/age 2 od/of 4

Prilog otvrdi o akreditaciji Datum izdanja riloga/ Annex Issued on 2010-12-29 Zamjenjuje rilog od/relaces Annex dated: 2008-07-21 veličina/ Mjerno odručje sosobnost* caability* Naomene 4. Temeratura/ Indikatori i simulatori za termoelemente Temerature/Indi cators and simulators for thermoelements -200 do/to 1600 400 mk 11/ v. 01:2007 5. 6. Temeratura/Blok kalibratori Temerature/ Block calibrators Tlak / Oružni manometri, digitalni manometri s okazivanjem i retvornici tlaka s električnim izlazom, Bourdon tube ressure gauges, electrical ressure gauges and ressure transmitters with electrical outut, differential ressure and overressure with negative and ositive values 20 do/to 100 0,4 K > 100 do/to 400 4 m K x t > 400 do/to 850 0 k Pa do/to 0,1 M Pa (0 bar do/to 1 bar ) 0,1 MPa do/to 0,5MPa (1 bar do/to 5 bar) 0,5 MPa do/to 2 MPa (5 bar do/to 20 bar) 0,2 MPa do/to 100 MPa (2 bar do/to 1000 bar) 3,5 K 0,5 mbar 2,5 mbar 5 10-4 5 mbar 2 10-4 20 mbar 13/ v. 01:2007 17/ v. 01:2007 DKD R 6-1:2003 Usoredba s otorničkim Comarison Usoredba s termoarom Comarison thermocoule lin (dušik, zrak) medium: gas (nitrogen, air) ulje medium: oil HAA-Ob-7/7-2/2 / Izdanje 6/Issue 6 stranica/age 3 od/of 4

Prilog otvrdi o akreditaciji Datum izdanja riloga/ Annex Issued on 2010-12-29 Zamjenjuje rilog od/relaces Annex dated: 2008-07-21 veličina/ Mjerno odručje sosobnost* caability* Naomene 7. Tlak / Oružni manometri, digitalni manometri s okazivanjem i retvornici tlaka s električnim izlazom, Bourdon tube ressure gauges, electrical ressure gauges and ressure transmitters with electrical outut, differential ressure and overressure with negative and ositive values 0 kpa do/to 0,5MPa (0 bar do/to 5 bar) 0,5 MPa do/to 2 MPa (5 bar do/to 20 bar) 2 MPa do/to 25 MPa (20 bar do/to 250 bar) 3 mbar 10 mbar 5 10-4 0,1 bar 17/ v. 01:2007 DKD R 6-1:2003** lin (dušik, zrak) medium: gas (nitrogen, air ulje, voda medium: oil, water 25 MPa do/to 70 MPa (250 bar do/to 700 bar) 5 10-4 0,2 bar * Iskazano kao roširena mjerna nesigurnost (k = 2) izračunata u skladu s EA-4/02:1999 Izražavanje mjerne nesigurnosti ri umjeravanju Exressed as an exanded uncertainty (k = 2) according to EA-4/02:1999 Exression of the uncertainty of in calibration ** Metoda se rovodi u laboratoriju i na terenu Method of calibration erformed in laboratory and on on-site. HAA-Ob-7/7-2/2 / Izdanje 6/Issue 6 stranica/age 4 od/of 4