Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com VSF3114 VSF3138 VSF3121 VSF3121/34 Stainless steel AISI 316L relief valves, suitable for compressed air, gas and liquid FEATURES Relief valve for pressure up to 50 bar (725 psi). Inlet and outlet connections 1/4 F, 3/8 F, 1/2 F and 3/4 F. Welded flange connections EN or ASME available on request. The relief valve opens when the inlet pressure increases above the set point initially regulated by the adjusting screw and it closes when the pressure goes down under the set point. Upstream pressure set point is controlled by a rubber diaphragm up to 15 bar (217 psi), by a piston for greater pressure. Available the ATEX version Brand II2GDcIICX. For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not in mines and zone 0). The product complies with the directive 97/23/CE PED.
SPECIFICATIONS Diaphragm relief valve weight: ~1,4 kg / ~3,09 lb (VSF3114 and VSF 3138), ~2,1 kg / ~4,63 lb (VSF3121 and VSF 3121/34) Piston relief valve weight: ~1.6 kg / ~3,53 lb (VSF3114 and VSF 3138), ~2.4 kg / ~5,29 lb (VSF3121 and VSF 3121/34) Working temperature: -20 C +60 C (-4 F +140 F) for standard version Degree of protection: IP25 MATERIALS Body and bonnet: stainless steel AISI 316L Internal parts: stainless steel AISI 316L Adjusting spring: AISI 302 or AISI316, not in contact with the fluid O-Ring: FPM (other compounds available on request) Main valve gasket: FPM (for inlet pressure up to 30 bar / 435 psi) PUR (for inlet pressure greater than 30 bar / 435 psi) Other compounds available on request Diaphragm: NBR + PTFE (PTFE in contact with the fluid) Stainless steel AISI 316L diaphragm available on request Piston: stainless steel AISI 316L ACCESSORIES Panel mounting ring-nut: P35017030304 (VSF3114 e VSF3138), P35018030304 (VSF3121 e VSF3121/34) Wall mounting bracket and ring-nut: M13302 (VSF3114 e VSF3138), M13304 (VSF3121 e VSF3121/34) Pre-set version: factory set relief pressure Dome loaded version: relief pressure to be controlled by a pilot pressure Fixed relief pressure: adjusting screw locked by a cap nut SPARE PARTS Complete kit: main valve, diaphragm and o-rings Copyright ID Insert Deal S.r.l. - All rights reserved 2
inlet pressure [bar] inlet pressure [bar] inlet pressure [bar] flow charts 4 3,5 3 2,5 2 1,5 1 0,5 0 VSF3121-VSF3121/34 - Pout 0,2 1,5 bar - Aria/Air 0 20 40 60 80 100 Flow rate [Nm^3/h] 6 5 4 3 2 1 0 VSF3121-VSF3121/34 - Pout 0,3 3 bar - Aria/Air 0 20 40 60 80 100 120 140 Flow rate [Nm^3/h] 10 8 6 4 2 VSF3121-VSF3121/34 - Pout 0,8 8 bar - Aria/Air 0 0 20 40 60 80 100 120 140 Flow rate [Nm^3/h] Copyright ID Insert Deal S.r.l. - All rights reserved 3
available model types Valvole di sfioro per media pressione Relief valves for medium pressure Valvole di sfioro per media pressione in acciaio inox 316L idonee per aria compressa e gas tecnici Relief valves for medium pressure made of stainless steel suitable for compressed air and technical gases Corpo e campana da lavorazione di barra/ Body by machining bar TYPE P. SFIORO Set pressure bar CONNECTION IN CONNECTION OUT Copyright ID Insert Deal S.r.l. - All rights reserved 4 CODE MEDIUM VSF3114 VSF 3114 A 0,2-1,5 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 B 0,3-3 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 C 0,8-8 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 E 1,5-15 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 G 3-30 G 1/4-F G 1/4-F S33#N Liquid VSF 3114 L 5-50 G 1/4-F G 1/4-F S33#N Liquid VSF3138 VSF 3138 A 0,2-1,5 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 B 0,3-3 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 C 0,8-8 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 E 1,5-15 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 G 3-30 G 3/8-F G 3/8-F S33#L Liquid VSF 3138 L 5-50 G 3/8-F G 3/8-F S33#L Liquid Aria - N2 - He - Ar - H2 - C3H8 - CH4 C ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD Attacchi entrata/uscita NPT / Inlet/outlet connections NPT Attacchi flangiati / Connections with flanges ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD Pressione di sfioro pretarata, sopra 1 bar / Pre-set relieving pressure, set point greater than 1 bar Pressione di sfioro tarata fissa, sopra 1 bar / Fixed relieving pressure, set point greater than 1 bar O-ring diversi da standard - EPDM / O-ring different from standard - EPDM O-ring secondo FDA / O-ring according to FDA Stampigliatura su specifica del cliente / Not standard branding Versione ATEX / ATEX version Temperature diverse da standard / Special temperature range Sgrassato uso / Degreased for ACCESSORI / ACCESSORIES Ghiera P35017030304 / Ring nut P35017030304 Kit staffa + ghiera M13302 / Kit bracket + Ring nut M13302
available model types Valvole di sfioro per media pressione Relief valves for medium pressure Valvole di sfioro per media pressione in acciaio inox 316L idonee per aria compressa e gas tecnici Relief valves for medium pressure made of stainless steel suitable for compressed air and technical gases Corpo e campana da lavorazione di barra/ Body by machining bar TYPE P. SFIORO Set pressure bar CONNECTION IN CONNECTION OUT CODE MEDIUM VSF3121 VSF 3121 A 0,2-1,5 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 B 0,3-3 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 C 0,8-8 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 E 1,5-15 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 G 3-30 G 1/2-F G 1/2-F S33#P Liquid VSF 3121 L 5-50 G 1/2-F G 1/2-F S33#P Liquid Aria - N2 - He - Ar - H2 - C3H8 - CH4 C ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD Attacchi entrata/uscita NPT / Inlet/outlet connections NPT Attacchi flangiati / Connections with flanges ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD Pressione di sfioro pretarata, sopra 1 bar / Pre-set relieving pressure, set point greater than 1 bar Pressione di sfioro tarata fissa, sopra 1 bar / Fixed relieving pressure, set point greater than 1 bar O-ring diversi da standard - EPDM / O-ring different from standard - EPDM O-ring secondo FDA / O-ring according to FDA Stampigliatura su specifica del cliente / Not standard branding Versione ATEX / ATEX version Temperature diverse da standard / Special temperature range Sgrassato uso / Degreased for ACCESSORI / ACCESSORIES Ghiera P35018030304 / Ring nut P35018030304 Kit staffa + ghiera M13304 / Kit bracket + Ring nut M13304 Copyright ID Insert Deal S.r.l. - All rights reserved 5
generating the product code Valvola di sfioro da barra Inox AA BB CC D E FF AA Attacchi / Connections H0 VSF3121 1/2"NPT-F L0 VSF3138 G 3/8-F N0 VSF3114 G 1/4-F P0 VSF3121 G 1/2-F Q0 VSF3121 G 3/4-F V0 VSF3114 1/4" NPT-F W0 VSF3138 3/8 NPT-F X0 VSF3121 3/4"NPT-F BB Intervallo uscita / Outlet range A0 0,2-1,5 bar B0 0,3-3 bar D0 0,8-8 bar E0 1,5-15 bar F0 3-30 bar G0 5-50 bar CC Tipologia di fluido / Fluid type 15 98 EPDM 99 FPM D Pilotato / Pilot operated N Non pilotato P Pilotato E Marchiato / Marked I ID Z Dir ATEX 94/9 CE FF Accessori / Accessories 00 Nessun accessorio CODE COMPOSITION EXAMPLE S33# N0 D0 98 N I 00 S33#: Standard stainless steel relief valves N0: Connections G 1/4 - F D0: Relief pressure range 0,8-8 bar (11,6 116 psi) 98: EPDM gaskets N: Not dome loaded I: Insert Deal 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 6
technical drawings (all dimensions in mm) Bracket and Ring-Nut to be ordered separately, Kit order number: M13302 MODEL H L1 L2 Diaphragm (0.2 1.5/0.3 3/0.8 8/1.5 15) ~161 27 43 Piston (3 30/5 50) ~175 42.5 58.5 63 M45x1.5 42 TYPE VSF3114 1/4" GF VSF3114 1/4" NPTF VSF3138 3/8" GF VSF3138 3/8" NPTF Ring-Nut P35017 IN/OUT G 1/4-F 1/4" NPT-F G 3/8-F 3/8" NPT-F Bracket P36057 IN OUT 37,5 L1 L2 H 6,5 64 52 42 Copyright ID Insert Deal S.r.l. - All rights reserved 7
technical drawings (all dimensions in mm) Bracket to be ordered separately, kit order number: M13304 TYPE IN/OUT VSF3121 1/2"GF G 1/2-F VSF3121 1/2"NPTF 1/2"NPT-F 63 VSF3121 3/4"GF G 3/4-F VSF3121 3/4"NPTF 3/4"NPT-F M50x1.5 43,5 Bracket P36061 Ring-Nut P35018 37 IN OUT 33 49 ~166 6,5 47 80 52 Copyright ID Insert Deal S.r.l. - All rights reserved 8
ID Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 30 2035 info@idinsertdeal.com www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. RELIEF VALVE_S33(VSF3114-VSF3138-VSF3121)_EN_00 Azienda con sistema di gestione qualità certificato. certificato N 50 100 9191 Company with certificated quality management system. certificate N 50 100 9191 Copyright ID Insert Deal S.r.l. - All rights reserved 9