MATERIAL SAFETY DATA SHEET

Similar documents
MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Activated Carbon %

N,N-Dimethyl-p-phenylenediamine Sulfate

Tween-20 - ULTRA PURE

1. Product Identification

MATERIAL SAFETY DATA SHEET

LIQUID ICE CORPORATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET C-MUL SUN DRILLING PRODUCTS CORP.

STARCH SOLUBLE. 2. Composition/Information on Ingredients

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

SAFETY DATA SHEET (SDS) Stick-It! Rear View Mirror Adhesive

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Version 3.0 Print Date 07/08/2012 REVISION DATE: 07/07/2012 SECTION 1 - PRODUCT IDENTIFICATION / PREPARATION INFORMATION

Safety Data Sheet 1533BR

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MSDS Number: M0140 * * * * * Effective Date: 08/02/07 * * * * * Supercedes: 11/16/04 MAGNESIUM CARBONATE

Version /28/2006

SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY

Issuing Date: April 27, 2015 Revision Date: April 7, 2016 Revision Number: 2 1. IDENTIFICATION OF THE SUBSTANCE OR PREPARATION AND OF THE COMPANY

Safety Data Sheet EX - RAY

Safety Data Sheet 1818BR

Material Safety Data Sheet CoolingCare 8141

04/20/2015 EN (English US) 1/5

Version /28/2006

Material Safety Data Sheet

Safety Data Sheet 1432BR

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet Magnesium EDTA, 0.02% w/v. Section 1 - Chemical Product and Company Identification

05/21/2015 EN (English US) 1/5

MATERIAL SAFETY DATA SHEET

Emergency Overview The product contains no substances which at their given concentration are considered to be hazardous to health.

Safety Data Sheet 1421

Material Safety Data Sheet Sodium Ammonium Phosphate Solutions. Section 1 - Chemical Product and Company Identification

Material Safety Data Sheet

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

M A T E R I A L S A F E T Y D A T A S H E E T

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET A Colorant

GLENIUM 3000 (FORMERLY: RHEOBUILD 3000FC; PS1140 ADMIXTURE)

SAFETY DATA SHEET 1. PRODUCT AND COMPANY INFORMATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

BT-701. Advanced Chemical Technology, Inc. SAFETY DATA SHEET Version 1.0 Effective Date: 06/01/15 1. PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet SANTOLUBES LLC SANTOTRAC, SANTOVAC, SANTOLUBES, AND SYNERGY P.O. Box 960 St. Charles, MO

SAFETY DATA SHEET SECTION 1 PRODUCT AND COMPANY INFORMATION SECTION 2 COMPOSITION INFORMATION ON INGREDIENTS SECTION 3 HAZARDS IDENTIFICATION

SAFETY DATA SHEET FOAMING NO ALCOHOL HAND SANITIZER

Safety Data Sheet 1797SYM

Safety Data Sheet 1225BR

SAFETY DATA SHEET Reinders No More Ice 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet EDTA Titrant, 0.005M M, 5% w/v. Section 1 - Chemical Product and Company Identification

Safety Data Sheet. Trade Name: RNase A. Revision Date: 12/30/2016 SECTION 1. IDENTIFICATION OF PRODUCT AND COMPANY: RNase A

Material Safety Data Sheet Magnesium stearate

SAFETY DATA SHEET Isopropyl Alcohol 70% Product Number: 32

Version /20/2006

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

1. IDENTIFICATION OF THE SUBSTANCE OR PREPARATION AND OF THE COMPANY. Concrete Stain Away. Date: September 1, 2015

LIQUINOX MSDS. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION. Ingredient Name T.L.V.

SECTION 1. Product and Company Identification TRAP N'TOSS ATTRACTANT. SECTION 2. Composition/Information on Ingredients TRAP N'TOSS ATTRACTANT

Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.

Safety Data Sheet Cutting Board Oil. 1. Identification of the substance/mixture and of the company/undertaking

SAFETY DATA SHEET FOAMING INSTANT HAND SANITIZER ALCOHOL FREE. Product Name : FOAMING INSTANT HAND SANITIZER ALCOHOL FREE

SAFETY DATA SHEET Klean Strip Green Paint & Varnish Remover 1. PRODUCT AND COMPANY IDENTIFICATION

04/21/2015 EN (English US) 1/5

M A T E R I A L S A F E T Y D A T A S H E E T

Safety Data Sheet 1454

Material Safety Data Sheet This MSDS is prepared in accordance with OSHA 29 CFR

Material Safety Data-Sheet (ANSI Z ) Preparation Date: January 12, 201 Version: 1.0 RATIONAL CARE-TAB

MATERIAL SAFETY DATA SHEET

Safety Data Sheet Revised 16 November 2015

8728 Utica Avenue Rancho Cucamonga, CA Telephone: 24 Hours: or Daytime: Fax:

SAFETY DATA SHEET Kilfrost Windscreen Washing Fluid 3 (WWF MOD 3)

SAFETY DATA SHEET. 1. Product and company identification. 2. Hazards identification. Page 1 of 5 Pot & Pan Detergent. Product Name POT & PAN DETERGENT

NewLook International, Inc. ProtéShield. Safety Data Sheet. Section 1 Product and Company Identification: Section 2 Hazards Identification:

Material Safety Data Sheet Remel Prepared Culture Media Containing Vancomycin. Section 1 - Chemical Product and Company Identification

Safety Data Sheet. 503 Main Street Belle Chasse, LA 70037

Material Safety Data Sheet

Material Safety Data Sheet

Safety Data Sheet 1452SYM

ALTRO W157 WHITEROCK ADHESIVE

Safety Data Sheet 1565BR

Safety Data Sheet 1782SYM

Janssen Pharmaceuticalaan 3a 2440 Geel, Belgium Acros Organics Company Identification: (USA)

1 Easton Oval Poison Control Center Columbus, OH

Safety Data Sheet. Section 1 - Chemical Product and Company Identification

SECTION 1: PRODUCT AND COMPANY INFORMATION SECTION 2: HAZARD(S) IDENTIFICATION

KEYSTONE WATER BASED STAINLESS STEEL POLISH. Use only for the purpose on the product label.

MATERIAL SAFETY DATA SHEET WIZARDS METAL POLISH MSDS DATE: 7/31/2010

Material Safety Data Sheet Potassium Ferrocyanide, 10% w/v. Section 1 - Chemical Product and Company Identification

1. Product And Company Identification. ARMOR ALL Air Freshening Protectant Pure Linen

Rest Easy SECTION 1 - IDENTIFICATION SECTION 2 - INGREDIENTS. The remaining components of this product comprise proprietary information.

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

1. Product And Company Identification

Transcription:

MATERIAL SAFETY DATA SHEET 1. Chemical Product and Company Identification MANUFACTURER: ADDRESS: UNITECH LUBRICANTS AMERICA INC. 605 COLBY DRIVE WATERLOO, ON, N2V 1A1 EMERGENCY PHONE NUMBER: 519-884-9209 (Mon-Fri: 8am-5pm) PRODUCT NAME: HOSMAC-S ONS 2039 US PRODUCT TYPE: Metal working fluid concentrate PREPARED BY: OH&S Coordinator DATE OF ISSUE: DEC 10, 2011 SUPERCEDES: Rev 1 2. Composition/Information on Ingredients Mixture of specific additives in water 3. Hazards Identification Emergency Overview The product is slightly alkaline. Unnecessary exposure to the product should be avoided. In case of contact with skin, eyes and clothing, product has to be removed immediately. ---------------------------------------------------------------------------------------------------- Potential Health Effects Inhalation: Not expected to be a probable route of exposure to product concentrate. Inhalation of diluted mix can occur in applications where high mist levels are generated. Extended exposure to mist may cause upper respiratory irritation. Ingestion: Not orally toxic. Swallowing small quantities may cause nausea or diarrhea. Skin Contact: Product may be a primary skin irritant. Eye Contact: Product may be a primary eye irritant. Chronic Exposure: No information available.

4. First Aid Measures Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty. Ingestion: If concentrate or mix is swallowed, do not induce vomiting. Give large amounts of water. Get medical attention. Never give anything by mouth to an unconscious person. Skin Contact: In case of contact, immediately flush skin with plenty of water. Remove contaminated clothing and shoes. Wash clothing before reuse. Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention. 5. Fire Fighting Measures Fire: Product will not ignite except after evaporation of the watercontent. Explosion: Not considered to be an explosion hazard, except after evaporation of the watercontent. Fire Extinguishing Media: Extinguish surrounding fire with suitable means. Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full facepiece operated in the pressure demand or other positive pressure mode. Water spray may be used to keep fire exposed containers cool. 6. Accidental Release Measures Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Collect with absorbent material and discard according to Federal, State and Local regulations. 7. Handling and Storage Storage place should provide protection against frost and heat. Best stored between 50 and 85 F in a dry and ventilated area. Keep container tightly closed.. Avoid all contact of concentrate with eyes and skin.

8. Exposure Controls/Personal Protection Airborne Exposure Limits: Contents Metalworking fluid (mist) 0,5 mg/m³ (NIOSH, REL) 100% Triethanolamine 5 mg/m³ (ACGIH, TLV) < 25% Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures as low as possible. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details. Skin Protection: Wear protective gloves (nitrile) and clean body-covering clothing when handling the concentrate. Eye Protection: Wear safety goggles when handling the concentrate. Maintain eye wash fountain in work area. Work/Hygiene Practices: Good personal hygiene should always be practiced. 9. Physical and Chemical Properties Appearance: colorless reddish/brown liquid Odor: typical Solubility: Miscible in water. Density: 1120 kg/m³ ph @ 20 g/l in water, 20 C (68 F): 9.2 % Volatiles by volume @ 21 C (70 F): Boiling Point: app. 100 C (212 F) water content Vapor Pressure (mm Hg): Evaporation Rate:

10. Stability and Reactivity Stability: Stable under ordinary conditions of use and storage. Hazardous Decomposition Products: Hazardous combustion products: Smoke, fumes, COx, NOx, SOx Hazardous Polymerization: Will not occur. Incompatibilities: Avoid contact with strong oxidizers to product concentrate. Conditions to Avoid: Heat, incompatibles. 11. Toxicological Information Oral rat LD50: Skin Effects: Eye Effects: >2000 mg/kg (calculated) 5%- Emulsion: no effects Mild eye irritation expected 12. Ecological Information This product represents a hazard to water. Keep product out of sewage systems or water bodies. Avoid entering into the ground. 13. Disposal Considerations For Used Mix: If pre-treatment is necessary, ultrafiltration may be used. "EMPTY" Containers will contain a residue which is not considered a hazardous waste under RCRA regulations. Drums can be drained to a "drip dry" condition by inversion and can be offered for recycling or scrap. Disposal procedures must comply with Local, County, State and Federal regulations. 14. Transport Information Not regulated

15. Regulatory Information SARA Section 302: Not applicable SARA Hazard catagories, SARA Sections 311/312 Acute Chronic Fire Reactivity Pressure Yes No No No No SARA Sections 313: None Chemical Inventories The Ingredients of this product are on the following Chemical Substance Inventories: EINECS TSCA DSL Poison Schedule: No information found. WHMIS: This MSDS has been prepared according to the hazard criteria of the Controlled Products Regulations (CPR) and the MSDS contains all of the information required by the CPR. 16. Other Information Label Hazard Warning: As part of good industrial and personal hygiene and safety procedure, avoid all unnecessary exposure to the concentrate product and ensure prompt removal from skin, eyes and clothing. Label Precautions: Label First Aid: None. Not applicable. Product Use: Revision Information: No changes. Metal Working Fluid Concentrate ALL STATEMENTS, INFORMATION A DATA PROVIDED IN THIS MSDS ARE BELIEVED TO BE ACCURATE A RELIABLE. THIS INFORMATION IS PRESENTED WITHOUT GUARANTEE OR THE RESULTS TO BE OBTAINED FROM THE USE THEREOF. USERS SHOULD MAKE THEIR OWN INVESTIGATIONS TO DETERMINE THE SUITABILITY OF THE INFORMATION FOR THEIR PURPOSE. NOTHING IS INTEED AS PERMISSION IUCEMENT TO VIOLATE ANY LAWS. SELLER SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OR LIABILITY RESULTING FROM THE USE OF THE PRODUCT IN THE BUYER S MANUFACTURING PROCESS OR IN COMBINATION WITH OTHER SUBSTANCES.