Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R12MD R38MD Modular regulators, suitable for compressed air FEAURES Diaphragm pressure regulator, standard version inlet pressure up to 20 bar (290 psi). Inlet and outlet connections 1/2 - F and 3/8 - F in the body. Outlet pressure is controlled by a rubber diaphragm. The main valve is balanced. Modular design to couple with same series: filter and lubricator. Holes for wall mounting. Pressure regulation knob with lock system. Overpressure relieving function. Available the ATEX version. Brand II2GDcIICX. For use in potentially explosive atmospheres zones: 1, 21, 2, 22 (not for mines and zone 0). The product complies with the directive 97/23/CE PED. Available units composed of: Filter + Regulator + Lubricator.
SPECIFICATIONS Regulator weight: ~0.7 kg (~1.54 lb) Standard version operating temperature: -10 C +50 C (+14 F +122 F) Main valve leakage classification: VI (bubble tight) Flow coefficient: Kv= 1.5 Nm³/h (Cv=1.76 US gal/min) Degree of protection: IP25 G¼ port for outlet pressure gauge on both sides MATERIALS Body: aluminium casting Bonnet: PA 6 / POM Adjusting spring: C85 (not in contact with the fluid) Main valve spring: C85 Diaphragm: NBR O-Ring: NBR Main valve gasket: NBR ACCESSORIES Ring-nut for panel mounting: 0ND01 Bracket + ring-nut for wall mounting (10 pcs): M11201 Not relieving version for gas Gauge SPARE PARTS Complete kit: assembled diaphragm, main valve, o-ring, net filter Copyright ID Insert Deal S.r.l. - All rights reserved 2
Outlet pressure [bar] flow charts 9 R12MD-R38MD - PS=10 bar - Aria/Air 8 7 6 5 4 3 2 1 0 0 50 100 150 200 250 300 350 Flow rate [Nm3/h] Copyright ID Insert Deal S.r.l. - All rights reserved 3
available model types Regolatori di pressione Pressure regulators Regolatori di pressione per media pressione in lega leggera idonei per aria compressa Pressure regulators for medium pressure made of aluminium suitable for compressed air Corpo da fusione in alluminio / Cast aluminium body Campana in plastica / Bonnet made of plastic Struttura modulare / Modular execution TYPE PS bar P.Out bar CONNECTION IN/OUT RELIEVING GAUGE CODE MEDIUM R12 MD R12 MD 20 0,2-1,5 G 1/2-F S N 512#P Air R12 MD 20 0,3-3 G 1/2-F S N 512#P Air R12 MD 20 0,8-8 G 1/2-F S N 512#P Air R12 MD 20 1,5-15 G 1/2-F S N 512#P Air RP 12 MD ** 20 1,5-15 G 1/2-F S N 512#P Air R38 MD R38 MD 20 0,2-1,5 G 3/8-F S N 512#L Air R38 MD 20 0,3-3 G 3/8-F S N 512#L Air R38 MD 20 0,8-8 G 3/8-F S N 512#L Air R38 MD 20 1,5-15 G 3/8-F S N 512#L Air RP 38 MD ** 20 1,5-15 G 3/8-F S N 512#L Air ** Versione pilotata / Dome loaded execution ATTACCHI DIVERSI DA STANDARD / CONNECTION DIFFERENT FROM STANDARD Attacchi entrata/uscita NPT / Inlet/outlet connections NPT ESECUZIONI DIVERSE DA STANDARD / EXECUTIONS DIFFERENT FROM STANDARD Pressione uscita pretarata / Pre-set outlet pressure Pressione uscita tarata fissa, vite con dado cieco / Fixed outlet pressure, screw with cup nut Versione non Relieving / Non Relieving execution Sgrassato uso O2 / Degreased for O2 ACCESSORI / ACCESSORIES Ghiera 0ND01 / Ring nut 0ND01 Kit staffa metallica+ ghiera plastica M11201 - Confezione 10 pezz / Kit bracket +Ring nut of plastic M11201-10 pieces per b Copyright ID Insert Deal S.r.l. - All rights reserved 4
generating the product code R12MD - R38MD AA BB CC DD E F GG AA Attacchi / Connections H0 R12MD 1/2"NPT-F L0 R38MD G 3/8-F P0 R12MD G 1/2-F W0 R38MD 3/8"NPT-F BB Pressione ingresso / Inlet pressure C0 20 bar CC Intervallo uscita / Outlet range A0 0,2-1,5 bar B0 0,3-3 bar D0 0,8-8 bar E0 1,5-15 bar DD Tipologia di fluido / Fluid type 01 Relieving 98 EPDM 99 FPM 97 NBR E Pilotato / Pilot operated N Non pilotato P Pilotato F Marchiato / Marked I ID Z Dir ATEX 94/9 CE GG Accessori / Accessories 00 Nessun accessorio CODE COMPOSITION EXAMPLE 512# L0 C0 D0 01 N I 00 512#: Modular LL regulator L0: Connections G 3/8 F C0: Maximum inlet pressure 20 bar D0: Outlet pressure range 0,8 8 bar (11,6 116 psi) 01: Relieving version N: Not dome loaded I: Insert Deal 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 5
technical drawings (all dimensions in mm) 63 47 52 M50x1.5 Ring-Nut 0ND01 7 Bracket P36059 48 IN OUT ~151 Ø5,5 61,5 45,5 GAUGE OPTIONAL 17 G 1/4 GAUGE PORT 51 64 ~66 TYPE IN/OUT R38 MD 3/8" GF G 3/8" -F R12 MD 1/2" GF G 1/2" -F R38 MD 3/8" NPTF 3/8" NPT-F R12 MD 1/2" NPTF 1/2" NPT-F OUTLET PRESSURE [bar] GAUGE CODE GAUGE RANGE [bar] 0.2 1.5 0ABNAB19 0 2.5 0.3 3 0ABNAB20 0 6 0.8 8 0ABNAB22 0 16 1.5 15 0ABNAB23 0 25 Copyright ID Insert Deal S.r.l. - All rights reserved 6
ID Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Insert Deal non si assume alcuna responsabilità per la scelta, uso e manutenzione di qualsiasi prodotto. La responsabilità per l idonea scelta, uso e manutenzione di qualsiasi prodotto ID rimane interamente a carico dell acquirente. Insert Deal does not assume responsibility for selection, use and maintenance of any products. Responsibility for proper selection, use and maintenance of any ID products remains entirely to the purchaser. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. 2^S-512 - R12MD-R38MD_IT_00 Azienda con sistema di gestione qualità certificato. certificato N 50 100 9191 Company with certificated quality management system. certificate N 50 100 9191 Copyright ID Insert Deal S.r.l. - All rights reserved 7