FA 10 202 00 3 FA 10 201 00 2 Model: FA 10 202 00 EN 358:2000 EN 813:2008 5 POINT LUXURY FULL BODY HARNESS Work positioning belt with 2 D rings. Waist level D ring for rope access. Quick connect buckles. Model: FA 10 201 00 EN 358:2000 4 POINT LUXURY FULL BODY HARNESS Front & rear attachment points. Work positioning belt with 2 D rings. Quick connect buckles. FA 10 101 00 1 FA 10 208 00 2 Model: FA 10 101 00 2 POINT LUXURY FULL BODY HARNESS Front & rear attachment points. Quick connect buckles. Model: FA 10 208 00 EN 358:2000 4 POINT ELASTICATED FULL BODY HARNESS Work positioning belt with 2 D rings. Special stainless steel fittings. Elastic webbing for comfort and impact resistance. www.kratossafety.co.uk 1
FA 10 107 00 1 FA 10 206 00 Model: FA 10 107 00 2 POINT ELASTICATED FULL BODY HARNESS Special stainless steel fittings. Elastic webbing for comfort and impact resistance. Model: FA 10 206 00 EN 358:2000 EN 813:2008 5 POINT COMFORT FULL BODY HARNESS Work positioning belt with 2 D rings. Waist level D ring for rope access. FA 10 205 00 FA 10 105 00 Model: FA 10 205 00 EN 358:2000 4 POINT FULL BODY HARNESS Work positioning belt with 2 D rings. Model: FA 10 105 00 2 POINT FULL BODY HARNESS 2 www.kratossafety.co.uk
FA 10 108 00 Model: FA 10 108 00 SINGLE POINT FULL BODY HARNESS Rear D ring. FA 10 302 00 FA 10 303 00 FA 10 106 00 Model: FA 10 106 00 EN 1497:1996 RESCUE FULL BODY HARNESS Extension rescue strap with top D ring. Model: FA 10 302 00 EN 471:2003 2 POINT HIGH-VISIBILITY FULL BODY HARNESS Front & rear attachment points. Yellow work vest. Adjustable zip system. Model: FA 10 303 00 EN 471:2003 2 POINT HIGH-VISIBILITY FULL BODY HARNESS Front & rear attachment points. Orange work vest. Adjustable zip system. www.kratossafety.co.uk 3
FA 20 102 20 FA 10 102 00 FA 20 100 00A Model: FA 10 102 00 SINGLE POINT FULL BODY HARNESS Rear D ring. Adjustable thigh and chest strap. Model: FA 20 100 00A EN 353-2:2002 FALL ARRESTER to suit 14-16mm polyamide twisted rope All ropes supplied separately. 10 mtr rope (Model: FA 20 100 10). 20 mtr rope (Model: FA 20 100 20). Longer lengths available. Unique non-inverting system to prevent installing the device upside down. FA 20 100 00B Model: FA 20 100 00B EN 353-2:2002 FALL ARRESTER to suit 14-16mm polyamide twisted rope with shock absorber All ropes supplied separately. 10 mtr rope (Model: FA 20 100 10). 20 mtr rope (Model: FA 20 100 20). Longer lengths available. Unique non-inverting system to prevent installing the device upside down. Model: FA 20 102 20 EN 353-2:2002 CAPTIVE FALL ARRESTER attached to 12mm x 20 mtr kernmantle rope with shock absorber 10 mtr rope (Model: FA 20 102 10). Rope lengths available from 5 mtrs to 100 mtrs. Rope ends protected by strong transparent sleeve which makes the stitching visible for easy inspection prior to use. 4 www.kratossafety.co.uk
FA 20 301 02 FA 20 400 06 FA 20 500 03 Model: FA 20 400 06 EN 360:2002 RETRACTABLE FALL ARREST BLOCK 6 mtr (Model: FA 20 400 06). 10 mtr (Model: FA 20 400 10). 15 mtr (Model: FA 20 400 15). 20 mtr (Model: FA 20 400 20). 30 mtr (Model: FA 20 400 30). Outer casing made from high impact resistant polymer. Minimum breaking strength 15 kn. Fitted with karabiner at top. Swivel snap hook with load indicator at bottom. Galvanised steel wire rope 4.8mm. Model: FA 20 500 03 EN 360:2002 RETRACTABLE FALL ARREST BLOCK 3.5 mtr (Model: FA 20 500 03). 25mm webbing. Outer casing made from high impact resistant polymer. Minimum breaking strength 15 kn. Fitted with karabiner at top. Swivel snap hook with load indicator at bottom. FA 40 304 15 Model: FA 20 301 02 EN 360:2002 Model: FA 40 304 15 POLYAMIDE LANYARD FOR HORIZONTAL USE Model: FA 40 304 15 For use only with Kratos safety Olympe fall arrest block with polymer casing and steel wire rope which are approved for horizontal use when used with polyamide lanyard connected to the cable self retracting lifeline. FA 60 004 15 RETRACTABLE FALL ARREST BLOCK 2.5 mtr (Model: FA 20 301 02). 50mm webbing. Protective casing. Incorporates a shock absorber. Swivel eye load indicator at top. Snap hook at bottom. Also available with karabiner at bottom. (Model: FA 20 300 02). Minimum breaking strength 15 kn. Model: FA 60 004 15 EN 795:1996 Class B ANCHORAGE WEBBING SLING 1.5 mtr (Model: FA 60 004 15) 44mm wide webbing with stainless steel D ring at each end. Minimum breaking strength 15 kn. www.kratossafety.co.uk 5
FA 30 500 15 FA 30 502 15 Model: FA 30 500 15 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC. SHOCK ABSORBING KERNMANTLE ROPE LANYARD 1.5 mtr (Model: FA 30 500 15) 12mm kernmantle rope with thimble eyes and fitted with 35mm webbing shock absorber at one end only. Loops protected by abrasion resistant thimble. Also available in 1.8 mtrs (Model: FA 30 500 20). FA 30 503 15 Model: FA 30 502 15 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC. SHOCK ABSORBING KERNMANTLE ROPE LANYARD 1.5 mtr (Model: FA 30 502 15) 12mm kernmantle rope with thimble eyes fitted with 35mm webbing shock absorber at one end and scaffold hook at the other end. Loops protected by abrasion resistant thimble. Also available in 1.8 mtrs (Model: FA 30 502 20). FA 30 304 18 Model: FA 30 503 15 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC SHOCK ABSORBING KERNMANTLE ROPE LANYARD 1.5 mtr (Model: FA 30 503 15) 12mm kernmantle rope with thimble eyes fitted with 44mm webbing shock absorber and snap hook at one end and scaffold hook at the other end. Loops protected by abrasion resistant thimble. Also available in 1.8 mtrs (Model: FA 30 503 20). Model: FA 30 304 18 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC SHOCK ABSORBING WEBBING LANYARD 1.8 mtr (Model: FA 30 304 18) 30mm wide webbing lanyard with 35mm webbing shock absorber and karabiner at one end and scaffold hook at the other end. Loops protected by abrasion resistant tubular webbing. FA 30 303 15 FA 30 702 20 Model: FA 30 303 15 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC SHOCK ABSORBING WEBBING LANYARD 1.5 mtr (Model: FA 30 303 15) 44mm wide webbing lanyard with 44mm wide webbing shock absorber and snap hook at one end and scaffold hook at the other end. Loops protected by abrasion resistant tubular webbing. Also available in 2.0 mtrs (Model: FA 30 303 20). Model: FA 30 702 20 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC SHOCK ABSORBING EXPANDABLE LANYARD 1.8 mtr (Model: FA 30 702 20) 44mm wide elasticated webbing lanyard with 35mm wide webbing shock absorber at one end and scaffold hook at the other end. Loops protected by abrasion resistant tubular webbing. 6 www.kratossafety.co.uk
FA 40 502 15 FA 40 503 10 Model: FA 40 502 15 Breaking strength is 22 kn as per EN 354:2002 RESTRAINT KERNMANTLE ROPE LANYARD 1.5 mtr (Model: FA 40 502 15) 1.0 mtr (Model: FA 40 502 10). 1.8 mtr (Model: FA 40 502 20). 12mm kernmantle rope with thimble eye at one end and scaffold hook at the other end. Loops protected by abrasion resistant thimbles. FA 40 500 15 Model: FA 40 503 10 Breaking strength is 22 kn as per EN 354:2002 RESTRAINT KERNMANTLE ROPE LANYARD 1.0 mtr (Model: FA 40 503 10) 12mm kernmantle rope with scaffold hook at one end and snap hook at the other end. Loops protected by abrasion resistant thimbles. 1.5 mtr (Model: FA 40 503 15). 2.0 mtr (Model: FA 40 503 20). FA 40 302 15 Model: FA 40 500 15 Breaking strength is 22 kn as per EN 354:2002 RESTRAINT KERNMANTLE ROPE LANYARD 1.5 mtr (Model: FA 40 500 15) 1.0 mtr (Model: FA 40 500 10). 1.8 mtr (Model: FA 40 500 20). 12mm kernmantle rope with thimble eye each end. Loops protected by abrasion resistant thimbles. FA 40 702 20 Model: FA 40 302 15 Breaking strength is 22 kn as per EN 354:2002 RESTRAINT WEBBING LANYARD 1.5 mtr (Model: FA 40 302 15) 1.0 mtr (Model: FA 40 302 10). 1.8 mtr (Model: FA 40 302 20). 30mm wide webbing with loop at one end and scaffold hook at the other end. Loops protected by abrasion resistant tubular webbing. FA 40 703 20 Model: FA 40 702 20 Breaking strength is 22 kn as per EN 354:2002 RESTRAINT EXPANDABLE LANYARD 1.8 mtr (Model: FA 40 702 20) 44mm wide elastic webbing with loop at one end and scaffold hook at the other end. Loop protected by abrasion resistant tubular webbing. Model: FA 40 703 20 Breaking strength is 22 kn as per EN 354:2002 RESTRAINT EXPANDABLE LANYARD 2.0 mtr (Model: FA 40 703 20) 44mm wide elastic webbing with snap hook at one end and scaffold hook at the other end. Loop protected by abrasion resistant tubular webbing. www.kratossafety.co.uk 7
FA 30 800 15 FA 40 600 15 Model: 30 800 15 EN 355:2002 and tested as per VG 11 of PPE Directive 89/686/EEC Y FORKED SHOCK ABSORBING EXPANDABLE LANYARD 1.5 mtr (Model: FA 30 800 15) 44mm wide elastic webbing with 35mm wide shock absorber & karabiner at one end and scaffold hook at the other ends. Loops protected by an abrasion resistant tubular webbing. FA 30 600 15 Model: 40 60 15 Breaking Strength is 22 kn as per EN 354:2002 Y FORKED KERNMANTLE ROPE LANYARD 1.5 mtr (Model: FA 40 600 15) 12mm kernmantle rope with snap hook at one end and scaffold hooks at the other ends. Loops protected by abrasion resistant thimbles. Stitching protected by strong transparent sleeve. FA 30 400 18 Model: FA 30 600 15 EN 355:2002 and tested as per VG11 of PPE directive 89/686/EEC Y FORKED KERNMANTLE SHOCK ABSORBING LANYARD 1.5 mtr (Model: FA 30 600 15) 12mm kernmatle rope with 44m wide webbing shock absorber & karabiner at one end and scaffold hooks at the other ends. Loops protected by an abrasion resistant thimble. Stitching protected with a strong transparent sleeve. Model: FA 30 400 18 EN 355:2002 and tested as per VG11 of PPE directive 89/686/EEC Y FORKED SHOCK ABSORBING WEBBING LANYARD 1.8 mtr (Model: FA 30 400 18) 30mm wide webbing with 35mm wide webbing shock absorber & karabiner at one end and scaffold hooks at the other ends. Loops protected by an abrasion resistant tubular webbing. FA 40 901 20 FA 40 902 20 Model: FA 40 901 20 EN 358:2000 ADJUSTABLE WORK POSITIONING WEBBING LANYARD 2.0 mtr (Model: FA 40 901 20) 33mm webbing with karabiner at each end. Alloy steel ring adjuster. Model: FA 40 902 20 EN 358:2000 ADJUSTABLE WORK POSITIONING KERNMANTLE ROPE LANYARD 2.0 mtr (Model: FA 40 902 20) 12mm kernmantle rope with karabiner at each end. Alloy steel ring adjuster. Loops protected by abrasion resistant thimbles. 8 www.kratossafety.co.uk
FA 60 001 00 7ft TRIPOD Telescopic legs adjustable height from 1.15 mtr to 2.15 mtr. Wheelbase: 1.5 mtr. Maximum load capacity: 200 kgs. Also available in 10 ft (Model: FA 60 002 00). FA 60 003 00 Model: FA 60 001 00 EN 795:1996 Class B Model: FA 60 003 00 EN 1496:2006 (Class A) To be used with a Retractable Fall Arrester (EN360) when deployed for raising or lowering a person. FA 90 001 00 FA 50 101 17 Steel Screw-locking Karabiner Material: Alloy steel. Gate opening: 17mm. Minimum breaking strength: 23 kn. : EN 362: 2004 Class B. FA 50 301 23 Steel Triple-locking Karabiner Material: Alloy steel. Minimum opening: 23mm. Minimum breaking strength: 23 kn. : EN 362: 2004 Class B and ANSI Z 359.1 Class B. FA 50 207 55 Steel Scaffold Hook Material: Forged alloy steel. Gate opening 55mm. Gate breaking strength: 23 kn. : EN 362: 2004 Class T. Other fittings available. Fittings also available in aluminium and stainless steel. FA 10 901 00 RESCUE & WORK WINCH 4.8 mm dia. x 20 mtr galvanised steel wire rope. Load capacity 125 kgs. FA 60 004 15 Model: FA 60 004 15 EN 795:1996 Class B TEMPORARY LIFELINE Secures an operator throughout travel. Horizontal lifeline in 30 mm webbing. Forked ends in order to: Either anchor to a structure without the need to add anchorage sling, or hang directly on adapted anchorage point. Steel ratchet to put the system into tension after adjusting the required length. Supplied with 2 steel snap hooks. Adjustable length from 2 mtrs to 20 mtrs. Minimum breaking strength 25 kn. TOOLS LANYARD Attaches to user or anchor point. FA 70 007 00 BOSUN S CHAIR Comfortable working chair. For vertical ascent and descent. Spreader bar available as an optional extra. Tested as per EN 1498. SUSPENSION TRAUMA RELIEF STRAP Extremely effective, specially designed to help relieve the negative effects of suspension trauma. Compact and light-weight. Does not hamper the activity of worker while at work. Allows the suspended worker to stand up in the harness to relieve pressure. Easy to attach to the harness with the help of the textile loop and Velcro provided. Easy deployment, operation is foolproof. www.kratossafety.co.uk 9
Kratos Safety Scaffolders Kit FA 10 108 00 FA 30 304 18 Restraint Kit FA 10 108 00 FA 40 902 20 Includes Environmentally Friendly Carry Bag Includes Environmentally Friendly Carry Bag Premium Kit FA 10 101 00 FA 30 502 20 FA 40 902 20 Standard Kit FA 10 102 20 FA 30 502 20 Includes Environmentally Friendly Carry Bag FA 50 101 17 Includes Premium Rucksack FA 10 901 00 10 www.kratossafety.co.uk FA 50 101 17