Press Felt Optimization System
... continuously monitoring felt condition improves the quality and performance of your press section long term Press felt analysis system is a system for continuous online measurement of felt moisture and permeability for the clothing in the press. It is a one-sided measurement system with the highest positioning accuracy. The pneumatic contact pressure of the measuring head ensures optimal accuracy and reproducibility of the measurements. Benefits n Reliable, continuous and reproducible measurement of various felt characteristics n Clear visualization of press and felt characteristics n Quick diagnosis of moisture streaks and felt damage n Effective instrument for optimizing the press n Optimized felt conditioning leads to reduced energy consumption in the press and dryer section and to less felt wear n Fewer breaks, prevention of sheet stealing n No dependence on felt suppliers for measurements n Prevention of safety risks with manual measurements by the personnel, especially on fast-running machines n Improved operator decisions when changing the press settings n Integrated OnView information system facilitates high-performance data analyses of historical and current felt data
: installation position in the press section : installation position in a tissue machine (upper filt) F (lower felt) Description supports the paper maker during routine operation and in optimizing the press section settings. The measurements supply profile and trend information about felt moisture and permeability of the individual felts. They support improvement of felt performance and paper quality. The industry-wide communication standard OPC guarantees the system can be connected to any PCS, QCS or other IT systems. Moisture measurement The moisture sensor is based on microwave technology. It determines the felt moisture on the basis of the change in the dielectric constant. This change is brought about by the quantity of water present in the felt. The contact surface of the sensor consists of wear-free ceramic. The sensor is suitable for all types of press felts with a moisture content of 200 1,800 g/m². Permeability measurement In order to determine the permeability, the pressure difference between a water jet penetrating the felt and a reference pressure is measured. The machine speed has no influence on the measurement process. The contact surface of the sensor likewise consists of wear-free ceramic.
Scanner Moisture Permeability n Traversing unit n Mounting elements n Measuring head with sensors Water permeability: Supply cabinet Consumption 3 l/min Pressure min. 4 bar Max. temp. 50º C Control cabinet n Measuring head supply n Electrical supply Output: 1.1 kw n Scanner and sensor control n Data collection Max. 5.0 kw PC Scanner n Maximum felt width: 12 m n Scanner & end carriage material: stainless steel n Measuring head installation angle: +/ 180 n Maximum ambient temperature: 120 C n Scanner drive motor: 3-phase alternating current Water weight sensor n Measurement range: 200 1,800 g/m² n Measurement point size: 75 mm n Measurement rate: 20 readings/sec n Microwave measurement frequency: 433 MHz n Maximum ambient temperature: 50 C n Protection category: IP 68 n Measurement reproducibility: 1.3 g/m² (2-sigma) n Measurement accuracy: 20 g/m² (2-sigma) Permeability sensor n Measurement range: 0 100%, convertible to ml/min n Water pressure: 4 20 bar, depending on the available water pressure n Water flow rate through the nozzle: 1.5 l/min n Water consumption: 30 l/h n Maximum water temperature: 50 C n Measurement rate: 1,000 Hz
More safety with Operational and plant safety play a big role at the paper machine. The space within the press section of the paper machine is for the most part slippery, wet and inaccessible. There is thus a real danger of falling for the operator, since he has no free hand and it is difficult for him to maintain balance while doing overhead work. With, measurements with hand-held units are no longer necessary. This means an increase in safety for the operating personnel. Felt requirements at tissue facilities The change in permeability over the service life of the felts used is also an important characteristic for the cleaning and replacement of felts in the manufacture of tissue. The felts used in tissue production are finer and thus denser than for other paper grades. Therefore they cannot be so easily penetrated by water. This has an impact on the measurement of permeability: if the measured pressure is too high, important changes on the felt surface would not be visible. In addition, a nozzle diameter that is too small produces a very fine water jet that does not cover enough felt surface to ensure sufficient drainage with low pressure. Due to these special requirements, for tissue felts was optimized: the water pressure for permeability measurement is now 4 bar (instead of 23 bar) and the nozzle diameter was made larger, to 1.6 mm instead of 0.6 mm.
Voith Paper Ltd. Voith Paper Kompetenzzentren Manchester/Great Britain Máquinas e Equipamentos Ltda. Tel. +44 161 643 9273 São Paulo (SP)/Brazil Competence Centers Fax +44 161 653 3114 Tel. +55 11 3944 4000 Fax +55 11 3941 3979 Voith Paper SAS Orsay/France Voith IHI Paper Technology Co., Ltd St. Pöltener Straße 43 Tel. +33 164 86 5570 Tokyo/ Japan 89522 Heidenheim/Germany Fax +33 164 46 6549 Tel. +81 3 3277 4100 Tel. +49 7321 37-6115 Fax +81 3 3277 4130 Fax +49 7321 37-7838 Voith Paper S.A. Ibarra (Guipúzcoa)/Spain Tel. +34 943 67 37 99 Office: Kunshan/China Fax +34 943 67 28 48 Tel. +86 21 520 80388 Ravensburg/Germany Fax +86 21 520 80355 Tel. +49 751 83-2991 Voith Paper S.r.L. Fax +49 751 83-2982 Schio (Vicenza)/Italy PT. Voith Paper Tel. +39 0445 690 500 Jakarta/Indonesia Fax +39 0445 690 510 Tel. +62 21 78845922 Fax +62 21 78845985 Krefeld/Germany Tel. +49 2151 896-0 Office St. Petersburg/Russia Fax +49 2151 896-253 Tel. +7 812 325 82 03 Office Korea Fax +7 812 326 22 49 Tel. +82 11 345 7700 Fax +82 31 302 2787 St. Pölten/Austria Tel. +43 2742 806-2280 Fax +43 2742 806-42218 Voith Paper AB Spånga-Stockholm Sweden Tel. +46 8 622 07 40 Fax +46 54 15 32 43 Voith Paper Oy Vantaa/Finland Tel. +358 102184400 Fax +358 102184411 Voith Paper Inc. Appleton (WI)/USA Tel. +1 920 731 7724 Fax +1 920 731 0240 Office Mexico Tel. +52 427 2268 428 Fax +52 427 2723 308 www.voithpaper.com voithpaper.automation@voith.com vp aut 1014 d kalteny dm 500 2011/02 v.1 500 Technical data and illustrations subject to change!