Integrated System ust Shield Type IS www.intelligentactuator.de
M L S protective stainless steel sheet prevents particles from getting inside the actuator, and restrict grease from migrating outside the actuator ll of the components used including the servo motor, ballscrew, guide and frame, were developed by our company : ±0.0 maximum : maximum Speed: /sec maximum Payload: 80 Operating nvironment IP 0 ISS60HP Size S small M (X) medium (with mid support) L (X) large (with mid support) Screw Lead, 8, 6 Lead for SType, 0, 0 Lead for MType 0, 0 Lead for LType attage 60 60 00 00 minimum stroke maximum stroke (depends on axis size) Options rake Type Rated Power Screw Lead Maximum Speed /sec maximum Payload Moment S 60 0 8. 0. 6.7 8 00 6 M 0 80 69.6 99.0 6.7 0 0 0 0 0 80 0 0 MX 0 0 69.6 99.0 6.7 L 0 80 0.9 9.9 8.9 0 0 00 0 80 LX 0 0 0.9 9.9 8.9 00 0 80 m Ma Mb Mc (in steps of )
ISS 60 [Small 60 Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m 00 60 Specifications in ( ) are for 8 lead. Specifications in < > are for 6 lead. (00) <>.8 (7.) <6.7> ±0.0.0.6..9 6. 7. Servo ttached to ø, Lead, (8), <6>, Rolled Thread 0, acklash 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 09.6 (.8) <7.> Horizontal Use: 0 () <>, Vertical Use: (6) <> Ma: 8. Mb: 0. Mc: 6.7 Ma: 0 Mb, Mc: 0 90 (80) <760> ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0. (0.) <0.> g and (00) <> /sec speed. The centre of gravity exists at the halfway Optional rake Specification Model Screw Lead () Holding force ttachment Position Volt. Single ry isc Type Magnetic rake M690 8 6..7 6.8 Shaft approx. 80 V 0 0 6 6 00 7 7 00 8 8 9 9
ISM [Medium Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m Specifications in ( ) are for 0 lead. Specifications in < > are for 0 lead. 00 0 () <> () <9> 80 (6) <7> 0 () <> (0) <> 0. (69.) <8.> ±0.0 7.8 8.9 0.....6.7 6.9 8 Servo ttached to ø6, Lead, (0), <0>, Rolled Thread 0, acklash 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 680. (9.0) <68.6> Horizontal Use: 80 (0) <0>, Vertical Use: 9 (9) <> Ma: 69.6 Mb: 99.0 Mc: 6.7 Ma: Mb, Mc: ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0. (0.) <0.> g and 0 () <> /sec speed. The centre of gravity exists at the halfway Optional rake Specification Model Screw Lead () Holding force ttachment Position Volt. Single ry isc Type Magnetic rake M0 0 0 9.6 6.. Shaft approx. 80 V 0 78 0 60 78 0 70 678 00 80 778 00 90 878 978 0 078 6 0 78 6 0 78 8 0 78 8
ISM [Medium Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m Specifications in ( ) are for 0 lead 00 () (9) 0. (69.) ±0.0 7.8 8.9 0.....6.7 6.9 8 Servo ttached to ø6, Lead 0, (0), Rolled Thread 0, acklash 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 680. (9.0) Horizontal Use: 80 (0); Vertikal Use: 9 (9) Ma: 69.6 Mb: 99.0 Mc: 6.7 Ma: Mb, Mc: 6 (7) () 0 () ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0. g and () /sec speed. The centre of gravity exists at the halfway Optional rake Specification Model Screw Lead () Holding force ttachment Position Volt. Single ry isc Type Magnetic rake M0 0 0 6.. Shaft approx. 80 V 0 78 0 60 78 0 70 678 00 80 778 00 90 878 978 0 078 6 0 78 6 0 78 8 0 78 8 6
ISMX [Medium Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m 90 7.8 8.9 0.. 69. ±0.0...6.8 6.9 Servo ttached to ø6, Lead 0, Rolled Thread 0, acklash 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 9.0 Horizontale Use: 0 Ma: 69.6 Mb: 99.0 Mc: 6.7 Ma: Mb, Mc: ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0. g and /sec speed. The centre of gravity exists at the halfway 9 6 9 6 9 8 6 9 8 7 69 0 8 79 0 9 89 6 0 99 6 09 7 7
ISL [Large Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m Specifications in ( ) are for 0 lead. 00 () 6 (90) 0. (69.) ±0.0..8 6. 8 9.6..8. 6 7.6 9. 0.8 Servo ttached to ø0, Lead 0, (0), Rolled Thread 0, aklsh 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 680. (9.0) Horizontal Use: 80 (0), Vertical Use: 9 (9) Ma: 0.9 Mb: 9.9 Mc: 8.9 Ma: 70 Mb, Mc: 70 80 (76) 0 (60) 70 () 0 (6) ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0. g and () /sec speed. The centre of gravity exists at the halfway Optional rake Specification Model Screw Lead () Holding force ttachment Position Volt. Single ry isc Type Magnetic rake M0 0 0 6.. Shaft approx. 80 V 76 6 676 66 776 76 00 876 86 00 976 96 6 076 06 6 76 6 8 76 6 8 76 6 0 76 6 0 76 6 676 66 8
ISL00 [Large 00 Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m 00 00 90 76 60 6 0. ±0.0..8 6. 8 9.6..8. 6 7.6 9. 0.8 Servo ttached to ø0, Lead 0, Rolled Thread 0, acklash 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 680. Horizontal Use: 80, Vertical Use: 9 Ma: 0.9 Mb: 9.9 Mc: 8.9 Ma: 70 Mb, Mc: 70 ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0.g and /sec speed. The centre of gravity exists at the halfway Optional rake Specification Model Screw Lead () Holding force ttachment Position Volt. Single ry isc Type Magnetic rake M8 0. Shaft approx. 80 V 76 6 676 66 776 76 00 876 86 00 976 96 6 076 06 6 76 6 8 76 6 8 76 6 0 76 6 0 76 6 676 66 9
ISLX / 00 [Large / 00 Type] Unit eight (note ) Payload (note, ) Moment (note, ) (note ) /sec m (00) 90 80 0.8 (.). (.8).0 (.) 0. ±0.0.6 (6.0) 7. (7.6) 8.9 (9.) 0. (0.8) Servo ttached to ø0, Lead 0, Rolled Thread 0, acklash 0.0 or less Unique to IS, Integrated into Shaft Integrated xtruded luminium (60ST) hite lumited Treatment Stainless Steel Sheet (SUS0), Thickness 0. 680. Horizontale Use: 0 (80) Ma: 0.9 Mb: 9.9 Mc: 8.9 Ma: 70 Mb, Mc: 70 Specifications in ( ) are for 00 Type ote ) ote ) ote ) ote ) ote ) t a speed of 0/sec for seconds affixed to a flat, strong frame. t an acceleration of 0. g and /sec speed. The centre of gravity exists at the halfway 0 88 8 0 688 68 788 78 888 88 6 988 98 6 088 08 7 6 88 8 7 6
IS Series atalogue o. 099 The information contained in this catalog is subject to change without notice for the pupose of product inprovement Providing quality products since 986 II Industrieroboter GmbH Ober der Röth 68 Schwalbach am Taunus Germany Tel.:+96968890 ax:+9696889 Mail: info@iigmbh.de Internet: http://www.iigmbh.de II merica Inc. 690. 7th Street, Torrance, 900, U.S. Tel.: +08960 ax: +08908 II ORPORTIO 6 Shimizu Hirose, Shizuoka 00, Japan Tel.: +860 ax: +868