Chassis & Trailers: Dry & Reefer Van / Flatbed / Auto 904.696.0010 www.buffersusa.com
Sand Shoes (Low- & High-Profile) Low-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides Base Add l notes Fleet Eng. # Holland # K/W # Penz # Toca # 1001-2432 10 x 10 None n/a 4 GA. 7 GA. Flared Hole n/a 50616008 730163 05-349 905-700-121 1001-1295 10 x 10 None 1/4 7 GA. 7 GA. 013-00073 n/a n/a 05-310 905-700-101A 1001-1537 10 x 10 None 1/4 1/4 1/4 n/a 50616034 n/a 05-311 905-700-108 1001-2368 10 x 10 Double 1/4 1/4 1/4 n/a 50644048 730472 05-334 905-700-107-DG 1001-6494 12 x 10 None 3/16 3/16 3/16 n/a n/a n/a 05-329 905-700-122 1001-6493 12 x 10 None 1/4 1/4 1/4 n/a n/a n/a 05-308 905-700-106 1001-6480 12 x 12 None 1/4 7 GA. 7 GA. 013-01604 n/a n/a 05-312 n/a 1001-6476 12 x 12 None n/a 1/4 3/16 n/a n/a n/a 05-321 n/a 1001-2026 12 x 12 None 1/4 1/4 1/4 n/a 50616035 & 50616009 73055 05-336 n/a 1295 10 x 10 Low-Profile 1537 10 x 10 Low-Profile High-Profile Sand Shoes Fab. Steel / Finish Buffers Part # Size Gusset Patch Sides Base Add l notes Fleet Eng. # Holland # Penz # Toca # 1001-1737 7 x 4.5 None n/a 1/4 1/4 Dolly Wheel Foot n/a LG2066 05-303 905-700-102 1001-7171 10 x 10 None n/a 5/16 3/16 n/a XA-V-796-WS n/a n/a 1001-1291 10 x 10 Single n/a 7 GA. 7 GA. Flared Hole 013-01192 LG0055 05-300 905-700-100AF 1001-2931 10 x 10 Single n/a 1/4 7 GA. n/a n/a 05-320 n/a 1001-1292 10 x 10 Single 1/4 1/4 7 GA. n/a LG0051-01 05-330 905-700-100A 1001-6495 10 x 10 Double n/a 1/4 1/4 Flared Hole n/a n/a 05-338 n/a 1001-2529 10 x 10 Double 1/4 1/4 7 GA. n/a n/a 05-328 n/a 1001-2035 10 x 10 Double 1/4 1/4 1/4 n/a 50616036 05-318 905-700-123 1001-8069 12 x 10 None 1/4 1/4 1/4 For Holland Mark V, n/a n/a n/a n/a 1001-6231 12 x 10 Single n/a 3/16 3/16 Flared Hole n/a LG0065-03 05-301 n/a 1001-7172 12 x 10 Single n/a 1/4 7/32 n/a LG0050 n/a 905-700-105 1001-7329 12 x 10 Single n/a 1/4 1/4 1291 10 x 10 High-Profile 1292 10 x 10 High-Profile Flared Hole, For Holland Mark V n/a n/a n/a n/a 1001-1851 12 x 10 Double 1/4 1/4 1/4 n/a 50616012 05-317 n/a 1001-2930 12 x 12 Single n/a 1/4 7 GA. Flared Hole 013-01196 n/a 05-319 n/a 1001-6492 12 x 12 Double n/a 3/16 3/16 Flared Hole n/a n/a 05-350 n/a 1001-6103 12 x 12 Double n/a 1/4 1/4 Flared Hole n/a 50616001 05-339 n/a 1001-1852 12 x 12 Double 1/4 1/4 1/4 n/a 50616013 05-342 n/a [ 2 ] Place your order now: 904.696.0010
Sand Shoe Kits (High-Profile) High-Profile Sand Shoe Kits Buffers Part # Includes Sand Shoe Includes Axle Includes Fastener(s) Add l notes Holland # 1001-7171-S-F 1001-7171 1002-6821 Solid Axle 1002-1460-A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a 1001-7171-H-F 1001-7171 1002-6862 Hollow Axle 1002-1460-A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a 1001-7172-S-F 1001-7172 1002-6821 Solid Axle 1002-1460-A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a 1001-7172-H-F 1001-7172 1002-6862 Hollow Axle 1002-1460-A Spring Pins (2 ea.) One roll pin fitted, one taped to axle n/a 1001-7329-KIT-P 1001-7329 1002-1305 Hollow Axle 1002-1360 Locking Clip RK-V-115 1001-8069-KIT-P 1001-8069 1002-2775 Solid Axle 1002-1660 Locking Kit RK-V-315 Sand Shoe Axles & Axle Housings 1304-KIT 2775-KIT 1303-KIT-F 1407-KIT-F Axle Kits Axles: Fab. Steel / Finish Buffers Part # Axle Description Length Material Kit Includes Locking Hardware: Holland # Penz # Other # 1002-1303-KIT-F HD w/ welded cap 8 1-1/2 SCH 80 1002-1360-KIT 50616040 06-411 1001-6821-KIT Solid 8-1/4 1-7/8 Solid Steel 1002-1460-A (x2) XA-V-1903-1 n/a n/a Fleet Eng. 13-00244 Toca 905-700-208 1001-6862-KIT HD 8-1/4 1-7/8 Seamless Steel 1002-1460-A (x2) XA-V-1901-1 n/a Toca 905-700-204 1002-2775-KIT Solid w/ welded cap 8-3/8 1-7/8 Solid Steel 1002-1360-KIT n/a 06-441 Toca 905-700-210 1002-1407-KIT-F Std. Duty w/ welded cap 8-1/2 1-1/2 SCH 40 1002-1360-KIT 50616043 06-410 Fleet Eng. 13-00232 Toca 905-700-201A 1002-6478-KIT-F Extra HD w/ welded cap 8-1/2 1-1/2 SCH 160 1002-1460-KIT 50616044 06-425 Toca 905-700-209 1002-1304-KIT Solid 8-13/16 1-7/8 Solid Steel 1002-1460-KIT LG0204-04 (axle) 50616041 1002-1305-KIT-F Std. Duty w/ flared end 8-7/8 1-1/2 SCH 40 1002-1360-KIT n/a 06-404 1002-2440-KIT-F HD w/ flared end 8-7/8 1-1/2 SCH 80 1002-1460-KIT 50616042 06-405 06-431 Toca 905-700-200 1002-6297-KIT Solid w/ welded sq. cap 8-7/8 1-7/8 Solid Steel 1002-1360-KIT n/a 06-445 n/a 1002-2896-KIT-F Std. Duty w/ welded cap 15-3/8 1-1/2 SCH 40 1002-1360-KIT n/a 06-420 n/a Toca 905-700-201 FLRTW-1 Fleet Eng. 13-00240 Toca 905-700-201 FLR-1 1002-6479-KIT-F HD w/ welded cap 15-3/8 1-1/2 SCH 80 1002-1360-KIT n/a 06-421 Fleet Eng. 13-00336 1002-1736-KIT Solid, for Dolly Wheel Ft. 15-7/8 1-7/8 Solid Steel 1002-1360-KIT LG0204-01 (axle) 06-430 n/a 1002-6491-KIT Solid 16-1/2 1-7/8 Solid Steel 1002-1360-KIT LG0204-05 (axle) 06-432 Toca 905-700-203 1294 4-1/2 x 5 Base Plate Axle Housings Fab. Steel / Finish Buffers Part # Base Plate / Tube Fleet Eng. # Holland # New Life / TrailCo # Penz # Toca # 1002-1294 4-1/2 x 5 / 2-3/8 O.D. 013-00198 50616027 1190043 06-345 905-700-202A 1002-7828 5-1/2 x 5-1/2 / 2-3/8 O.D. n/a n/a n/a n/a Place your order now: 904.696.0010 [ 3 ]
Crank Handles & Keepers»» Steel w/ primer finish»» Ø1-1/4 O.D.»» 14 gauge tubing 1003-1297 1003-1296 1003-1298 1003-1789 1003-1406 1003-1365 1003-1366 1003-1367 Buffers Part# Description Fleet Engineers # Holland # Jost # Penz # Toca # 1003-1695 7 Crank Handle, Horizontal n/a n/a n/a 03-207-H n/a 1003-1296 9 Crank Handle, Horizontal 013-00427 n/a n/a 03-211-H n/a 1003-6497 12-1/4 Crank Handle, Horizontal 013-00440 50644047 n/a 03-212-H n/a 1003-1297 15 Crank Handle, Horizontal 013-00429 50644048 n/a 03-215-H 905-700-500 1003-1298 21 Crank Handle, Horizontal 013-00430 50644049 n/a 03-221-H 905-700-501 1003-1664 7 Crank Handle, Vertical n/a n/a n/a 03-207-V 905-700-501 1003-1764 9 Crank Handle, Vertical n/a n/a n/a 03-209-V n/a 1003-1365 11 Crank Handle, Vertical 013-00437 50644050 n/a 03-211-V 905-700-510 1003-1366 15 Crank Handle, Vertical 013-00439 50644051 n/a 03-215-V 905-700-502 1003-1367 21 Crank Handle, Vertical 013-00440 50644052 n/a 03-221-V 905-700-503 1003-6857 9-7/8 Crank Handle, Vertical n/a XA-V-90-0 C10592.2 n/a 905-700-503 1003-6858 12-3/8 Crank Handle, Vertical n/a XA-V-90-2 C10592.3 n/a n/a 1003-6859 15-1/4 Crank Handle, Vertical n/a XA-V-90-5 C10592.5 n/a 905-700-500 1003-6863 17-3/4 Crank Handle, Vertical n/a XA-V-90-10 C10592.4 n/a 905-700-501 1003-6430 19-3/4 Crank Handle, Vertical n/a XA-V-90-11 n/a n/a n/a 1003-1406 Keeper for Crank Handle n/a 750812 n/a 03-403 n/a 1003-1789 Keeper for Crank Handle, Spring Steel n/a XB-LG0085, 50618000 n/a 03-400 905-700-550 Place your order now: 904.696.0010 [ 4 ]
Crank Handle Shafts, Shift Shafts & Jack Shafts 1004-1368 Crank Handle Shaft Binkley, 1 x 19-1/4 1004-1753-KIT Shift Shaft Gear Assembly Jost A-400 / 401 / 440 Leg 1004-2631 Crank Handle Shift Shaft Axle for Austin Constant Mesh Round Leg 1004-7213 Crank Handle Shift Shaft Axle for Holland Mark V Heavy Duty Landing Leg Buffers Part# Description Austin # Binkley # Holland # Jost # 1004-1368 Shift Shaft, Universal Mount, 1" x 19-1/4" n/a LG0261-01 Series 50000, 51000, 4700 Kysor Westran # Penz # n/a n/a 03-509 1004-1379 Shaft, 1 x 19-5/8 6943-2 n/a n/a n/a 750003 03-501 1004-2631 Shift Shaft, 1 x 19-9/16 Constant Mesh, Round n/a 751175 n/a 751175 03-512 1004-1383 Shaft, 1 x 15-1/2 6948-1 n/a n/a 750002 03-500 1004-1790 Shaft, 1 x 10-5/8 6943-5 n/a n/a n/a n/a 03-502 1004-2427 Shift Shaft, No Gear, 1 x 10 6956-1 n/a n/a n/a 750004 03-511 1004-1729 Shift Shaft for Holland 150 Leg n/a n/a XA-06226-A n/a n/a 03-514 1004-6525 Shift Shaft for Holland 150 Leg n/a n/a XA-06226-C-402 n/a n/a 03-517 1004-7213 Shift Shaft Axle for Holland Mark V Leg n/a n/a XA-V-06625-A n/a n/a n/a 1004-7214 Jack Shaft Axle for Holland Mark V Leg n/a n/a XA-V-06624-A n/a n/a n/a 1004-1753-KIT Shift Shaft Geared Assembly for Jost Leg n/a n/a n/a B10285 SER n/a n/a [ 5 ] Place your order now: 904.696.0010
Turning Shafts & Assemblies 1005-1299 Adjustable Turning Shaft Assembly 37 56 Adjustable Turning Shaft Assemblies & Components 1005-1478 Adjustable Turning Shaft Assembly 53 72 Buffers Part# Description Fleet Engineers # Holland # Penz # Toca # 1005-1299 1005-1478 Adjustable Turning Shaft Assembly (37 56 ): 1 Center Tube 1299-A + 2 End Tubes 1299-B Adjustable Turning Shaft Assembly (53 72 ): 1 Center Tube 1478-A + 2 End Tubes 1299-B 012-00002 50618004 04-536 905-700-343 012-00003 50618005 04-552 905-700-344 1005-1299-A Center Tube (36 ) 1.5 O.D. x 14 GA, 1.25 I.D. 012-00005 n/a 04-536-2 n/a 1005-1478-A Center Tube (52 ) 1.5 O.D. x 14 GA, 1.25 I.D. 012-00006 n/a 04-552-2 n/a 1005-1299-B End Tube (12 ) 1.25 O.D. x 14 GA w/ 7/16 x 3/4 slot 012-00011 n/a 04-552-1 n/a 1005-1385 Turning Shaft 65, One-piece type One-piece Turning Shafts 1005-2388 Turning Shaft 69, One-piece type Buffers Part# Length Fleet Engineers # Holland # Jost # Penz # Toca # 1005-6499 42-1/2 (1-1/4 O.D. x 14 GA) n/a n/a n/a 04-652-42 n/a 1005-7607 55-7/8 (1 SCH 40 / Heavy Duty) n/a n/a 10363.55.87 04-653-55 n/a 1005-1385 65 (1-1/4 O.D. x 14 GA) n/a LG0094-6500 n/a 04-652-65 905-700-352 1005-2387 66-3/4 (1-1/4 O.D. x 14 GA) n/a 50618046 n/a n/a n/a 1005-2388 69 (1-1/4 O.D. x 14 GA) 012-00008 LG0094-6900 n/a 04-652-69 905-700-353 1005-7725 69 (1 SCH 40 / Heavy Duty) n/a n/a n/a 04-653-69 n/a Place your order now: 904.696.0010 [ 6 ]
Adjustable Braces Standard Duty End Tube: Ø 21/32 / 16.5 MM Hole, Reinforced End Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca # 1006-1308 22 30 1-3/4 O.D. x 15 GA 1-1/2 O.D. x 14 GA n/a n/a 04-10-22-30 n/a 1006-1309 26 41 1-3/4 O.D. x 15 GA 1-1/2 O.D. x 14 GA 013-01601 50618006 04-10-26-41 905-700-301 1006-1310 42 57 1-3/4 O.D. x 15 GA 1-1/2 O.D. x 14 GA 013-01602 50618007 04-10-42-57 905-700-303 1006-1311 56 72 1-3/4 O.D. x 15 GA 1-1/2 O.D. x 14 GA 013-01603 50618008 04-10-56-72 905-700-302 1006-1312 72 88 1-3/4 O.D. x 15 GA 1-1/2 O.D. x 14 GA 013-01655 n/a 04-10-72-78 n/a 1308 22 30 1310 42 57 1312 72 88 Medium Duty End Tube: Ø 21/32 / 16.5 MM Hole, Reinforced End Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca # 1006-1613 26 41 1-7/8 O.D. x 13 GA 1-5/8 O.D. x 13 GA n/a 50618012 04-15-26-41 n/a 1006-1614 42 57 1-7/8 O.D. x 13 GA 1-5/8 O.D. x 13 GA n/a 50618013 04-15-42-57 n/a 1006-1615 56 72 1-7/8 O.D. x 13 GA 1-5/8 O.D. x 13 GA n/a 50618014 04-15-56-72 n/a 1613 26 41 1614 42 57 1615 56 72 Heavy Duty Buffers Part# Length Center Tube End Tube (1) Fleet Eng. # Holland # Penz # Toca # 1006-1766 26 41 2 O.D. x 10 GA 1-5/8 O.D. x 11 GA 013-00991 n/a 04-40-26-41 n/a 1006-1767 42 57 2 O.D. x 10 GA 1-5/8 O.D. x 11 GA 013-00992 n/a 04-40-42-57 n/a 1006-1768 56 72 2 O.D. x 10 GA 1-5/8 O.D. x 11 GA 013-00993 n/a 04-40-56-72 n/a End Tube: Ø 21/32 / 16.5 MM Hole, Reinforced End 1766 26 41 1767 42 57 1768 56 72 Extra Heavy Duty for SeaLand End Tubes: Ø 21/32 / 16.5 MM Hole, Reinforced Ends Buffers Part# Length Center Tube End Tubes (2) Fleet Eng. # Holland # Penz # Toca # 1006-1527 20 24 SCH 40 Pipe 2 O.D. x 7 GA n/a n/a 04-80-20-24 n/a 1006-1528 25 34 SCH 40 Pipe 2 O.D. x 7 GA n/a n/a 04-80-25-34 n/a 1006-1529 26 41 SCH 40 Pipe 2 O.D. x 7 GA n/a 50618009 04-80-26-41 905-700-300 1006-2470 26 41 SCH 40 Pipe 2 O.D. x 7 GA w/ chamfered ends n/a 50618009 04-80-26-41 905-700-300 1006-1530 35 54 SCH 40 Pipe 2 O.D. x 7 GA n/a 50618010 04-80-35-54 905-700-350 1006-1531 56 72 SCH 40 Pipe 2 O.D. x 7 GA n/a 50618011 04-80-56-72 905-700-305 1527 20 24 2470 26 41 1531 56 72 [ 7 ] Place your order now: 904.696.0010
Fixed Braces Medium Duty w/ Chamfered Ends Buffers Part# Length (CL-CL) Tube Specs Holland # Penz # 1006-1966 21 1-7/8 O.D. x 13 GA LG0646-2100-P n/a 1006-1967 24 1-7/8 O.D. x 13 GA LG0646-2400-P 04-30-24 1006-1968 27 1-7/8 O.D. x 13 GA LG0646-2700-P n/a 1006-1969 32-7/8 1-7/8 O.D. x 13 GA LG0646-3288-P n/a 1006-1970 42-1/4 1-7/8 O.D. x 13 GA LG0646-4225-P n/a 1006-1960 42-1/2 1-7/8 O.D. x 13 GA LG0646-4250-P n/a 1006-1971 48-1/4 1-7/8 O.D. x 13 GA LG0646-4825-P n/a 1006-1961 48-1/2 1-7/8 O.D. x 13 GA LG0646-4850-P n/a 1006-1972 55-3/16 1-7/8 O.D. x 13 GA LG0646-5518-P n/a 1006-1996 60-1/4 1-7/8 O.D. x 13 GA LG0646-6025-P n/a 1967 24 Ø 21/32 / 16.5 MM Holes, Reinforced End Heavy Duty w/ Chamfered Ends 1973 24 Buffers Part# Length (CL-CL) Tube Specs Holland # Penz # 1006-1973 24 1006-6496 40 2 O.D. x 7 GA, chamfered ends 1.9 O.D., x 7 GA, SCH 80 pipe, primer LG0091-2400 04-30-24 LG0091-4000 04-20-40 Ø 21/32 / 16.5 MM Holes, Reinforced End Angled Braces 3/16 -thick Steel Buffers Part# Length (CL-CL) Dimensions Finish Trailmobile # Wabash # 1006-7601 22-1/2 L-Channel 1006-6533 1006-6532 25-5/16 L-Channel w/ 2 chamfered corners 31-1/2 L-Channel w/ 2 chamfered corners 24-1/2 x 1-13/16 x 1-13/16 Black n/a 13S00542 27-1/16 x 2 x 1-1/2 HDG 6004-8-100L n/a 33-1/4 x 2 x 1-1/2 HDG 6004-8-100A n/a Ø 11/16 / 17.5 MM drilled holes Ø 5/8 / 16 MM drilled holes Cross Brace 3/16 -thick Steel Buffers Part# Length (CL-CL) Dimensions Finish Wabash # 1006-7602 60 C-Channel 62-1/2 x 2-5/8 x 1-13/16 Black Weldable 13S00544 Ø 3/4 / 19 MM Holes Place your order now: 904.696.0010 [ 8 ]
K-Braces & Skirts/Supports (Wing-Type) K-Braces w/o Brackets Fab. Steel / Finish Buffers Part# Width Holland # Wabash # 1006-7600 65 Universal 50618015 13000065 1006-7599 71 Universal n/a 13000042 K-Braces w/ End Brackets Fab. Steel / Finish Buffers Part# Width Holland # Penz # Trailmobile # 1006-2015 63-5/8 n/a 02-501-96 n/a 1006-2016 69-5/8 50618015 02-501-102 4-A8-9-1 K-Braces w/ Wing Brackets 3/16 Fab. Steel / Finish Buffers Part# Width Great Dane # Penz # 1006-2317-US-KIT 64-1/8, U.S.-made 31721 02-500-102 1006-2318 70-1/8 31720 02-500-096 Wing-Type Skirts & Supports (listed in alpha order by OEM) Buffers Part# OEM Item / Material / Finish Dimensions Molded Knockouts Cross Reference # 1007-6380-CS 1007-6380-RS Cheetah 76232-CS / 76231-RS Wing Skirt 3/16 Fab. Steel / W 27-5/8 x H 13-1/8 x 2-5/8 side lips N/A New Life 1011237 (CS) / 1011236 (RS) Penz 02-62-XX, Strick AD-14C-0009-01-00 (CS) / AD-14C-0010-01-00 (RS) 1007-2788 Hyundai 20000735 Lower Wing Support 3/16 Fab. Steel / W 23-5/8 x H 17-17/32 x 2-1/4 side lips 1 large Ø3-21/32 hole N/A 6380-CS Cheetah-style 2788 Hyundai-style [ 9 ] Place your order now: 904.696.0010
Mounting Brackets (Wing-Type) 1606 Miller-style 2998-CS/-RS Utility-style 1607-CS/-RS Trailmobile-style Wing-Type Mounting Brackets listed in alpha order by OEM Buffers Part# OEM Material / Finish Dimensions Mounting Holes Cross Reference # 1007-2666 1007-1779-CS 1007-1779-RS 1007-2680-CS 1007-2680-RS 1007-8845-CS 1007-8845-RS 1007-1606 1007-2665-CS 1007-2665-RS 1007-1793-CS 1007-1793-RS 1007-1781-CS 1007-1781-RS 1007-6465-CS 1007-6465-RS 1007-2668-CS 1007-2668-RS 1007-2669 1007-2667-CS 1007-2667-RS 1007-1607-CS 1007-1607-RS 1007-1590 1007-2998-CS 1007-2998-RS 1007-1780-CS 1007-1780-RS 1007-7598-CS 1007-7598-RS Fruehauf FCF 001671 001 Great Dane 136-46 (CS) 136-46 (RS) Hyundai 20002893 (CS) 20000492 (RS) Hyundai 20014038 (CS) 20037741 (RS) Miller 700-4-481 Monon V09-189B-CS V09-189A-RS Pines PINES PILGB 1314R (CS) PINES PILGB 1314L (RS) Pines PINES PILGB 1315R (CS) PINES PILGB 1315L (RS) Pines GB4382R (CS) GB4382L (RS) Strick 03691 (CS), 03691 (RS) Strick AA13D-0506-01-00 Strick AA14D-0606-01-00 (CS) AA14D-0607-01-00 (RS) Trailmobile 1190544-CS / -RS Trailmobile 1190545 Utility 02-03-1103-0-078 (CS) 02-03-1103-0-077 (RS) Wabash WAB13S00047 (CS) WAB13S00048 (RS) Wabash 13S01022-CS / -RS 5/32 Fab. Steel / 3/16 Fab. Steel / HDG 10 GA Fab. Steel / 10 GA Fab. Steel / 1/8 Fab. Steel / 1/8 Fab. Steel / 3/16 Fab. Steel / W 47 x H 9-5/8 x 2 top/side lips W 48 x H 13 x 1-3/4 top lip W 60 x H 24 x 2 side lips W 48 x H 24 x 1-3/4 side lips W 48 x H 11-3/4 x 2-1/2 top lip W 48 x H 11-3/8 x 2 top lip W 39-1/8 x H 26 x 1-7/8 side lips W 50-1/2 x H 26 x 1-7/8 top lip W 50-1/2 x H 23-1/2 x 2 side lips W 48 x H 10-11/16 x 1-1/2 top lip & 2 side lips W 48 x H 12-21/32 x 2-1/4 top lip & 1-5/8 side lips W 50 x H 10-5/8 x 2-1/8 top lip & 1-1/2 side lips W 50-1/2 x H 11-1/2 x 3-1/2 top lip W 62-1/2 x H 25-1/2 x 3-1/2 top lip W 48-1/8 x H 23-3/8 x 1-3/32 top lip & 2-1/4 side lips W 48 x H 8-1/2 x 1-7/8 top lip W 48 x H 9-1/4 x 2 top & bottom lips 8 ea. Ø21/32 /16.5mm holes & 1 large rounded square hole 15 ea. Ø5/8 /16mm holes & 1 large pentagonal hole 18 ea. Ø11/16 /17.5mm holes & 1 large pentagonal hole 17 ea. Ø5/8 /16mm holes, 2 ea. Ø5/16 /8mm holes, 1 ea. large hexagonal & triangular holes 14 ea. Ø21/32 /16.5mm holes & 10 ea. Ø11/16 /17.5mm holes & 3 larger holes 11 ea. Ø17/32 /13.5mm holes & 14 ea. Ø17/32 /13.5mm holes & 17 ea. Ø17/32 /13.5mm holes & 10 ea. Ø11/16 /17.5mm holes & 12 ea. Ø11/16 /17.5mm holes & 10 ea. Ø11/16 /17.5mm holes & 14 ea. Ø21/32 /16.5mm holes & 14 ea. Ø21/32 /16.5mm holes & 8 ea. Ø17/32 /13.5mm holes & 5 larger 4-27/32 /123mm holes 10 ea. Ø21/32 /16.5mm holes & 3 larger holes 10 ea. Ø11/16 /17.5mm holes & large rounded square hole Penz 02-55 Holland 50618038 (CS) / 50618037 (RS), Penz 02-07-XX, New Life/TrailCo 1190540 (CS) / 1190541 (RS) N/A N/A Holland 50618016, Penz 02-30 Penz 02-41-XX, New Life 700-4-501-R (CS) / -L (RS) Penz 02-35-XX Penz 02-36-XX N/A Penz 02-59-XX Penz 02-60-XX Penz 02-58-XX Holland 50618034 (CS) / 50618035 (RS), Penz 02-02-XX, New Life 4-A1-224-R (CS) / 4-A1-224-L (RS), Toca 905-700-843 (CS) / 905-700-844 (RS) Holland 50618033, Penz 02-01 Vanguard UT02-03-1103-0-078 (CS) / UT02-03-1103-0-077 (RS) Penz 02-34-XX, New Life 700-4-420-R (CS) / 700-4-420-L (RS) N/A Place your order now: 904.696.0010 [ 10 ]
Mounting Brackets (U-Type) 2999-CS Utility style 2646 2033 Loadcraft style U-Type Mounting Brackets (Short) listed in order by width Buffers Part# Material / Finish Dimensions Mounting Holes Penz # 1007-2999-CS 1007-2999-RS 1007-2640 1007-2033 1/8 Fab. Steel / for Utility Chassis, # 03-1103-0-124 1/8 Fab. Steel / for Utility Chassis, # 03-1103-0-123 3/8 Fab. Steel / for Great Dane Trailers 3/8 Fab. Steel / for Loadcraft Chassis W 8-7/8 x L 12 x 5 flared tri. lip W 8-7/8 x L 12 x 5 flared tri. lip 8 ea. Ø9/16 /14mm holes & 1 large bell-shaped hole 02-71-CS 8 ea. Ø9/16 /14mm holes & 1 large bell-shaped hole 02-71-RS W 10 x L 10-1/2 x 6-3/4 lip 10 ea. Ø11/16 /17.5mm holes & 1 large pentagonal hole 02-43 W 10-1/4 x L 13-1/8 x 8-1/4 lip 10 ea. Ø21/32 /16.5mm holes, 1 large Ø3 hole & 2 large Ø3-1/2 holes on sides w/ notched corners 1007-2646 3/8 Fab. Steel / W 11-3/4 x L 12 x 3-1/2 lip 10 ea. Ø21/32 /16.5mm holes & 1 large Ø5 hole 02-51 1007-1476 3/8 Fab. Steel / for ACL Chassis, Holland #50618036, New Life #700-4-457 02-09 W 11-3/4 x L 12 x 5 lip 10 ea. Ø21/32 /16.5mm holes & 1 large Ø3 hole 02-03 1007-1477 1/4 Fab. Steel / W 11-3/4 x L 12 x 6 lip 10 ea. Ø21/32 /16.5mm holes 02-04 7327 Ajax / Hercules style 8254 Hyundai style 8045 Cheetah style U-Type Mounting Brackets (Long) listed in order by length Buffers Part# Material / Finish Dimensions Mounting Holes 1007-8254 1007-7327 1007-8045 1007-6379 1007-2787 1/4 Fab. Steel / for Hyundai Chassis 1/4 Fab. Steel / for Ajax & Hercules Chassis 1/4 Fab. Steel / for Cheetah Chassis 1/4 Fab. Steel / for Cheetah Chassis Holland #50618017, New Life #1310562 1/4 Fab. Steel / for Hyundai Chassis, #20000497 L 23-5/8 x 10-1/2 x 8-13/32 lip L 24 x W 10-1/2 x 6-3/4 lip L 25-1/16 x W 10-15/32 x 7-7/8 lip L 25-3/4 x W 10-1/2 x 7-7/8 lip L 27 x W 10-15/32 x 6-7/8 lip 12 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4 side holes 10 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø4 side holes 10 ea. Ø11/16 /17.5mm holes, 1 large pentagonal hole & 2 large Ø4 side holes 12 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4 side holes 10 ea. Ø21/32 /16.5mm holes, 1 large pentagonal hole & 2 large Ø3-3/4 side holes [ 11 ] Place your order now: 904.696.0010
Brace Lugs 1306 for Square Leg 2642 for Great Dane 1631 1634 Buffers Part# Material / Finish Dimensions Description Holland # Penz # Other Cross-Ref. 1008-1306 3/8 Steel / 4-1/4 /4-1/4 x 1-5/8 /1-5/8 x 2 2-hole for Square Leg, 90+90 50618018 02-14-A 1008-1307 3/8 Steel / 5-1/8 /5-1/8 x R2-3/4 x 2 2-hole for Round Leg, Curved 50618020 02-15-A Fleet Engineers 011-00104, Kysor/Westran 730157, TrailCo T-L-J4890 Kysor/Westran 730005 TrailCo T-L-J4154 1008-1361 3/8 Steel / 5-1/2 x R2-3/4 x 2 1-hole, Curved N/A 02-16-A N/A 1008-1364 3/8 Steel / 2-5/8 x 2 1-hole, Short N/A 02-10-A Fleet Engineers 011-00098 1008-1378 3/8 Steel / 3-1/2 x 4 x 2 1-hole, T-shape N/A 02-38 N/A 1008-1381 3/8 Steel / 10 x 2 x 1 2-hole, 90+90, off-center 730052 02-25 TrailCo T-L-1011242 1008-1382 3/8 Steel / 10 x 2 x 1 2-hole, 90+90 50618047 02-32 N/A 1008-1467 3/8 Steel / 9-1/4 x 2 2-hole, Straight 730624 02-37 N/A 1008-1473 3/8 Steel / 6-7/8 x 2-3/4 x 2 2-hole, L-shape, 90 50618021 02-11-A N/A 1008-1630 3/8 Steel / 8-13/32 x 2 2-hole, Straight 50618022 02-12-A N/A 1008-1631 3/8 Steel / 2-3/4 x 2-3/4 x 2 1-hole, L-shape, 90 50618023 02-13-A Fleet Engineers 011-00100, Toca 905-700-322, TrailCo T-L-1011244 1008-1634 3/8 Steel / 3-1/4 x 2-1/4 x 2 2-hole, L-shape, 90 50618024 02-39 Toca 905-700-325 1008-1757 3/8 Steel / 9-1/2 x 2 3-hole, Straight 50618025 02-40 N/A 1008-1788 3/8 Steel / 4-7/8 /4-7/8 x 2 /2 x 2 2-hole, 90+90 N/A 02-21-A TrailCo T-L-1190554 1008-2007 3/8 Steel / 7-5/8 x 2 2-hole, Straight 50618025 02-22-A N/A 1008-2034 3/8 Steel / 9-3/4 x 2 x 1 2-hole, Universal 730051 02-20 N/A 1008-2101 3/8 Steel / 5-1/8 /5-1/8 x 2-1/4 /2-1/4 x 2 2-hole, 90+90, Universal N/A 02-24-A Cheetah 1008-2641 3/8 Steel / 8 x 3 1-hole Rectangle 50618041 02-40 Great Dane 09954 1008-2642 3/8 Steel / 9-1/2 x 3 1-hole Quadrilateral 50618042 02-45 Great Dane 09955 1008-2643 3/8 Steel / 13 x 4-1/2 2-hole Trapezoid 50618043 02-46 Great Dane 09758 1008-2644 3/8 Steel / 10-1/16 x 2 x 1 2-hole, 30+30 N/A 02-47 Austin 8910-5 1008-2645 1/4 Steel / 3-3/8 x 1-7/8 x 2 1-hole, L-shape, 90 N/A 02-50 N/A 1008-2647 5/16 Steel / 3 x 2 x 2 1-hole, L-shape, 90, beveled ends N/A 02-56 Kysor/Westran 1008-2648 3/8 Steel / 10-1/4 x 2 2-hole, Flat 50618027 02-57 Kysor/Westran, Jost JOSC10262 1008-2765 3/8 Steel / 4-3/8 /4-3/8 x R2 x 2 2-Hole for Round Leg (Curved) N/A N/A N/A 1008-2774 3/8 Steel / 9-1/4 x 2 x 1 2-Hole, Universal N/A 02-25/MOD N/A 1008-2967 3/8 Steel / 5-1/4 /5-1/4 x 2-1/2 /2-1/2 x 2 2-Hole for Jost A400/A401 Square Leg N/A 02-66 Jost J0SC10108, Utility JOC10108 1008-2974 7/16 Steel / 10 x 2 2-Hole, Straight 50618028 N/A N/A 1008-2986 3/8 Steel 4-3/8 /4-3/8 x 1-7/8 /1-7/8 x 2 2-Hole for Square Leg XA-V-1938 N/A TrailCo T-L-XA-V-1938 1008-6338 3/8 Steel / 5-5/16 /5-5/16 x R2-1/2 x 2 2-Hole for Round Leg (Curved) 730005 02-42 1008-7124 3/8 Steel / 4-5/16 /4-5/16 x 1-1/2 /1-1/2 x 2 2-Hole, 75+75 LG0266 N/A N/A 1008-7332 1/4 Steel / 3-1/8 x 2-3/16 x 2 1-Hole, Curved N/A 02-16-B N/A 1008-7333 1/4 Steel / 4-7/8 /4-7/8 x 2 /2 x 2 2-Hole, 90+90 N/A 02-21-B N/A 1008-7334 3/8 Steel / 6 x 4 x 4 V-shape, Universal N/A 02-23-A N/A 1008-7605 3/8 Fab. Steel / Black Austin J-4154, Fleet Engineers 012-00545, Holland BL-4, Kysor/Westran 9-3/4 x 3 2-Hole, Rectangle for Square Leg N/A N/A Wabash 13S00018 [ 12 ] Place your order now: 904.696.0010
Other Braces & Brackets 2015-A Upper Angle Bracket 2015-B Lower C-Bracket K-Brace Brackets Buffers Part # Material / Finish Dimensions Description Fits 1008-2015-A 3/16 Steel / Red 9-1/4 x 4 x 2 Upper Angle Bracket, 4 holes Buffers 1006-2015, 1006-2016 & Penz 02-501-096, 02-501-102 1008-2015-B 3/16 Steel / Red 9-3/8 x 4-3/4 x 2 Lower C-Bracket, 4 holes Buffers 1006-2015, 1006-2016 & Penz 02-501-096, 02-501-102 Other Braces Buffers Part# Material / Finish Dimensions Description Cross-Ref. 2992 for Holland Mark V 7603 for Wabash 1008-2992 3/16 Steel / Red 3-1/2 x 3-1/2 Brace Lug Plate for Holland Mark V Leg Holland LG1829 1008-7603 1/4 Fab. Steel / Red 7 x 6 Upper Brace Connection, 1-hole Wabash 13S00397 1008-7604 1/4 Fab. Steel / Red 6-1/2 x 4 Lower Brace Connection, 1-hole Wabash 13S00398 1008-7606 3/8 Fab. Steel / Black 5-1/2 x 3-1/16 Brace Ear, 1-Hole, Diagonal Wabash 13S00547 Covers (Landing Leg & Gearbox) 2398 for Holland 150 2398 for Austin-K/W 6466 for Jost 2-speed Landing Leg Covers (Fab. Steel w/ finish) Buffers Part# Description Dimensions Cross-Ref. 1009-2398 Square, for Atlas 55 & Holland 150 Legs 4-5/8 x 4-5/8 x 5/8 Holland XA-06218 1009-2399 Round, for Austin-Kysor/Westran Lift Pak R5-1/8 x 1/2 Kysor/Westran 751568 1009-6466 Square, for all 2-speed Jost Gearbox Legs 5-1/2 x 5-1/2 x 1-1/16 Jost C10217 1008-6467 Square, for all 1-speed Jost Slave Legs 5-1/2 x 5-1/2 x 5/8 Jost C10259 6467 for Jost 1-speed 2758 for Holland 150 leg 6527 for Holland 4700, 4701, 51000 legs Gearbox Covers Buffers Part# Material / Finish Dimensions Description Cross-Ref. 1009-2758 Fab. Steel / 3-1/2 x 3-1/2 2 Holes, for Holland 150 Leg Holland XA-06224-A 1009-6527 Fab. Steel / Self-color 7 x 6 3 Holes, for Holland 4700, 4701 & 51000 Legs Holland XB-LG 0663 Place your order now: 904.696.0010 [ 13 ]
The Nation s Premier Intermodal Hardware Supplier Providing the Industry with Quality Products for Over 30 Years Detroit VA Los Angeles Houston Jacksonville Buffers USA is Known for: Quality Parts Competitive Pricing High Fill Rates National Distribution Network Jacksonville, FL Houston, TX Detroit, MI Los Angeles, CA 904-696-0010 Email: sales@buffersusa.com Web: www.buffersusa.com