DOUGLAS BARRELS, INC.

Turned, Threaded Barrel No. or Type Rough Turned to Finished Turned Chambered, Cut to (See Reverse Side for Approx. Size & Polished Length, Crowned & Further Detail Information) (PRET) (FT) Polished (FTC) 1.200 BREECH 1.200 BREECH FEATHERWEIGHT 188.00 198.00 258.00 NO. #1 166.00 176.00 236.00 NO. #2 THRU #3 148.00 158.00 218.00 NO. #4 THRU #7 157.00 167.00 227.00 #5 Super Mag. for 458's 157.00 167.00 227.00 Silhouette 148.00 158.00 218.00 NO. #8 175.00 185.00 242.00 BENCHRESTER & #9 215.00 225.00 285.00 BASIC SHORT 129.00 N.A. NA BASIC MEDIUM 137.00 N.A. NA BASIC LONG 149.00 N.A. NA N.A.= Not Available DOUGLAS BARRELS, INC. 5504 BIG TYLER ROAD CHARLESTON, WEST VIRGINIA 25313-1398 RETAIL PRICE LIST May 1, 2003 PHONE 304-776-1341 FAX 304-776-8560 WEB http://benchrest.com/douglas NOTE: UNLESS SPECIFIED BY CUSTOMER, PRET AND FT BARRELS ARE 1.200 BREECH O.D. All prices above are for DOUGLAS ULTRARIFLED barrels made of electric furnace, gun barrel quality, double heat-treated chrome moly steel that has been melted to DOUGLAS specifications. _ NOTE... For each barrel wanted in Premium Grade (XX) add.$10.00 For each barrel wanted in Prem. Air-Gaged Tolerance..$35.00 AIR GAGE BARRELS AVAILABLE IN 22LR THRU 30 CAL. ONLY For each barrel wanted in.17 caliber add.$20.00 Stainless in most popular calibers add. $68.00 Additional charges for BASIC, PRET, or FT barrels Chamber only.... $45.00 Thread only.... $35.00 Crown only.... $35.00 BARREL DUPLICATION duplicate your existing barrel add. $50.00 On duplications, you must supply the old barrel or a round pattern to fit between centers of our duplicator. THE ABOVE PRICES ARE SUBJECT TO A GUNSMITHS DISCOUNT AS SHOWN ON GOLDENROD DISCOUNT SHEET. BARREL FITTING See separate sheet for details. TERMS are Cash, COD or Notify before shipping. Customers with previously established credit or a satisfactory D&B rating will be shipped open account 1% 10 days, 30 DAYS net. All shipments are F.O.B. Charleston. Visa, MasterCard and Discover accepted. Dear Customer - Please be aware that our hours are from 7:00 A.M. till 3: 15 P.M. in the Eastern time zone. We do not answer the phone after hours as the person who may have the answer to your question has gone home and you will have wasted your phone call. PRICES SUBJECT TO CHANGE WITHOUT NOTICE INVOICING WILL BE AT PRICE PREVAILING.

BBL. SPORTER BARRELS TYPE APPROX. NO. A B C D E F WEIGHT 1 22".700".560" 1.200" 1-1/4" 3" LT. SPT. 2-1/4 LBS. 2 24".750".600" 1.200" 1-1/4" 2-5/8" STD. SPT. 2-3/4 LBS. 3 24".780".625" 1.200" 1-1/4" 2-3/8" MED. SPT. 3 LBS. 4 26".875".650" 1.200" 1-1/4" 2-1/8" HVY. SPT. 3-1/2 LBS. 5 26".900".700" 1.200" 1-3/4" 2 MAG. SPT. 4 LBS. 5A 22"-26" 1.015".750" 1.200 1.750" 2 458 SPT. ** SILHOUETTE 24" Only.950.750" 1.200" Only 1.750" 2" SIL. 4-1/2 LBS. FEATHERWEIGHT 22" - 560" 1.200" 1/4" - FWT. 2 LBS. TARGET BARRELS 6 26" -.750" 1.200" 3 LIGHT TARGET 5-1/2 LBS. 7 26" -.875" 1.200" 3 STAND TARGET 6-1/4 LBS. 8 28" - 1.000" 1.200" 3 HEAVY TARGET 8-1/2 LBS. 9 30" - 1.125 1.250" 3 MAGNUM TARGET 9-3/4 LBS. 7-W 28" -.937" 1.060" 3 FOR WIN SS ETC. 6 LBS. BENCHRESTER 1-1/4" STRAIGHT CYLINDER ROUGH OR FINISHED TURN 9-11 LBS. BASIC 25-1/2" 1.200" PLUS OD ROUGH TURNED BLANK BARREL - BASIC 27-1/2" 1.200 PLUS OD ROUGH TURNED BLANK BARREL - BASIC 29-1/2" 1.200 PLUS OD ROUGH TURNED BLANK BARREL - NOTE: The featherweight barrel is approximately the same size and shape as the Winchester barrel used on the featherweight rifle. Dimension "x" is.960. "y" is.635" and "z" is 11". WE DO NOT GUARANTEE THESE DIMENSIONS BUT RESERVE THE RIGHT TO CHANGE THEM AT ANY TIME. NOTE: You must cut 1 ½ off of the muzzle of all BASIC, PRET and FT barrels.

CALIBERS OF BARRELS WE MAKE AND CARTRIDGES WE CHAMBER FOR CAL. TWIST CARTRIDGES 17 6,9,10 & 12 17 Ackley Bee, 17-222, 17-222Mag., 17-223, 17 Rem., 17MK IV, 17 HMR (rimfire) 20 10 & 12 20 PPC (.230)*, 20 BR (.230)*, 20 TNT (.227)* NOTE: 20 TNT is the same as the 20-17 Rem 20 VT (.230), 20 VTT (.230), 20 Tactical 22LR 14, 16 & 17 No Chambering 22CF 7,8,9,10,12, 219 Lovell Imp., 222 Rem., 219 Don, 22-250 Std. & Imp., 220 Swift, 222 Mag., 222 Rimmed, 225 Win., 223 Rem. or 14 & 16 5.56mm, 219 Zipper, 218 Bee, 221 Rem., 22 Rem. BR, 22 Cheetah Mark I 40 shoulder, 22 Cheetah Mark II 27 shoulder. 22 PPC Sporter, 22 Hornet, 22 Jet, 22K Hornet. 6mm 8,9,10,12 & 14 243 Win., 244 Rem., 6mm Rem. Std. & Imp., 6mm-222Mag., 6mm Rem. International, 243 Rock Chucker, 243 Super Rock Chucker, 6mm-284, 240 Wby. Mag., 6mm-22-250, 6mm Rem. BR, 6mm-223, 6mm PPC Sporter, 6mm-06. NOTE: 6mm-222Mag. is the same as the 6X47mm. The 243 Super Rock Chucker is a version of the 30-06 necked to 6mm. Dies are available from RCBS. 25 10, 12 & 14 257 Roberts Std. & Imp., 25-06, Std. & Imp., 257 Wby., 25 Krag Std. & Imp., 250-3000 Sav. Std. & Imp., 256 Mag., 25-284 6.5mm 8,9,10 & 12 6.5 x 55mm, 6.5 x 257,6.5 x 61 S&H, 264 Win., 6.5 x 54 Mann. Sch., 6.5 x 06,6.5 x 284,6.5-300 Wby., 6.5 Rem. Mag., 6.5 x 7.62, 260 Bobcat (.292)*, 6.5 Panther (.296)*, 260 Rem. 270 10 & 12 270 WCF Std. & Imp., 270 Wby., 270 WSM 7mm 9,10 & 12 7x57,7mm Ackley Imp., 7mm Wby., 284 Win., 280 Rem. Std. & Imp., 7x61 S&H, 7mm Rem. Mag., 7mm-308. 7mm-300 Wby., 7mm Rem. Exp., 7mm-06, 7mmTCU, 7mm-08, 7mm BR, 7mm STW, 7mm WSM, 7mm-30 Waters, 7mm Rem. Ultra, 7mm/300 WSM 30 10,12 & 14 308 Win., 7.62 NATO, 30-06 Std. & Imp., 300 Win., 30-30, 30-40 Krag, 300 Wby., 308 Norma Mag., 30-338, 30-378 Wby., 300 Sav., 300 H&H Std. & Imp., 300 Rem Ultra, 300WSM. 32 S&W Long 12, 14 & 16 No Chambering 32-40 14,16,18&20 32-40 Win. 8mm 10 & 12 8 x 57 mm, 8mm-06, 8mm Rem. Mag. 338 10 & 12 338 Win., 340 Wby., 338-06, 338 Rem Ultra, 338 WSM. 348 10,12 & 14 348 Win. 35 10,12 & 14 358 Win., 350 Rem. Mag., 358 Norma Mag., 35 Whelan Std. & Imp., 35 Rem. 9mm 10,12,14, & 16 No Chambering 38 Spec. 10, 12, 14 & 16 No Chambering 9.3mm 10 & 12 No Chambering 375 12,14,16 & 18 375 H&H, Std. & Imp., 375 Wby., 38-55 WCF, 375 Win, 378 Wby. Mag. 10mm 14 & 16 No Chambering 405 14 405 Win. 416 12 & 14 416 Taylor, 416 Rem. 40 16, 18 No Chambering 41 Mag 14, 16 & 18 No Chambering 44 Mag 14, 16 & 36 No Chambering 45 ACP 14, & 16 No Chambering 458 14,16,18,20 & 22 458 Win., 458-2 American, 45-70, 458 Lott, 450 Marlin 50 36 No Chambering - intended for 50 Sharps cartridge only * Tight neck NOTE: Our twists are at the whole inch (i.e. 9,10,11, etc.) and tolerance is plus or minus 1/2". WE WILL NOT GUARANTEE PERFORMANCE OF ANY WEATHERBY, 264 Win., 300 Win., Sharpe & Hart, or other belted wildcat cartridges.

REMINGTON CONTOURS Turned, Threaded Remington Contours Rough Turned to Finished Turned Chambered, Cut to Approx. Size & Polished Length, Crowned & (PRET) (FT) Polished (FTC) Rem Mtn. BBL 001 166.00 176.00 236.00 Rem Sporter 002 148.00 158.00 218.00 Rem Sporter 003 148.00 158.00 218.00 Rem Sporter 004 157.00 167.00 227.00 Rem Mag Sporter 005 148.00 158.00 218.00 Rem Mag Sporter 006 157.00 167.00 227.00 Rem Varmint 007 157.00 167.00 227.00 Remington Contours A B C D E Rem Mtn. Bbl 001 20.690.550 1.200 13 Rem Sporter 002 22.760.660 1.200 15 Rem Sporter 003 24.760.660 1.200 17 Rem Sporter 004 26.760.660 1.200 19 Rem Mag Sporter 005 24.830.660 1.200 17.5 Rem Mag Sporter 006 26.830.660 1.200 19.5 Rem Varmint 007 26.965.830 1.200 22 BARRELS FOR SINGLE-SHOT RIFLES SCHUETZEN OR CREEDMORE STYLE We are now making a basic-type blank from chrome-moly steel suitable for rebarreling or building new Schuetzen or Creedmore style rifles. These blanks are 35 ½ rough length to be finished at 34". Cut the 1 ½ at the muzzle as the chamber will clean up the breech end. This blank comes in random, rough-turned outside diameters of 1.200" up. Calibers available are 32, 38, 40, 45 and 50 Sharps. These are rifle calibers. Price is $214. each with a discount to dealers. DOUGLAS 4 GROOVE 30 CALIBER BARRELS We are now making 4 groove 30 caliber barrels. These barrels are available in any of our standard shapes. Price will be the same as 6 groove barrels. We are also making available 4 or 6 groove match grade military M-1 Garand Barrels chambered in 30-06 or 7.62 Nato. These barrels are chambered.025 short so the gunsmith can headspace to each action. These barrels will be 10 twist and will fit Government Issue Military M-1 Garands Only. Price is $228. each with a 20% discount to dealers. DELIVERY: We have never been fortunate enough to get ahead of our orders. Deliveries are slow at times. Special twists, shapes and other specifications that depart from the norm slow deliveries much more. Approximate delivery on basics is 2-4 weeks, preturned 3-5 weeks, finished turned is 4-6 weeks, and finished, threaded, and chambered 6-8 weeks. Barrel fitting service is approximately 6-8 weeks PRICES SUBJECT TO CHANGE WITHOUT NOTICE. INVOICING WILL BE AT PRICE PREVAILING.

PALMA BARRELS Price for this service is $395.00 plus postage. We will Rockwell check your action and if found not suitable, advise you before starting work. We will supply you with a barrel of your choice of size from our standard shapes FWT through Benchrester. The barrel will be of our chrome moly air gaged, premium quality. Barrel will be fit, headspaced and proof tested in those calibers where proof cartridges are available. If proof cartridge is not available, we will fire a new factory cartridge or hand load assembled into new brass to maximum loads. Every effort will be made to assure highest quality material and workmanship. Barrels will be supplied in the white - NO BLUING. All barrels fit in our shop will be branded with caliber, G. R. DOUGLAS and XX premium grade stamp. For.17 caliber, add $20.00. PALMA Rough Turned to Approx. Size (PRET) Finished Turned & Polished (FT) Turned, Threaded Chambered, Cut to Length, Crowned & Polished (FTC) 215.00 225.00 285.00 We will fit barrels to SUITABLE bolt actions. ADD $68.00 FOR STAINLESS BARREL FITTING SERVICES Should your action require that the bolt face be opened to accept magnum head diameter cartridges, there will be an additional $15.00 charge. WE DO NOT INSTALL SIGHTS OR MAKE ALTERATIONS TO THE MAGAZINE to insure the cartridge feeding. This is your responsibility. Should you wish an old barrel to be duplicated, we can probably do this for you, depending on barrel shape wished. Price is $50.00 additional. We cannot guarantee we will not scratch the blue on your action. Every effort is made to prevent this, but it sometimes happens. CLEANING INSTRUCTIONS Run 2 or 3 wet patches with a good bore cleaner through the barrel. Then use a brass brush and wet patch again. When sighting in, clean every 10-15 shots. Always leave cleaner in bore when you are finished shooting. This will dissolve fouling left in barrel. The barrel should be thoroughly dried before shooting. If Sweets is used, do not leave in barrel more than 5 minutes. Do not mix Sweets with any other cleaner. Do not use stainless steel brushes or abrasive cleaners in barrel.

A brief description of our barrels. BASIC BARREL This is a rifled bar of steel, cylindrical in shape, with a rough lathe turned finish. These barrels will vary in diameter but will always finish at least 1.200" O.D. This barrel is available in three lengths as noted on the price list and barrel shape chart. This blank is intended for those gunsmiths who wish to turn and shape their own barrels. THE PRETURNED BARREL This barrel is rough turned to approx. size and shape. Usually it will be.025" to.050" larger than the finished dimensions noted on the barrel size chart. It will be finish centered and will have a rough lathe finish. It is intended to be finish centered and final shaped by you. It comes to you 1-1/2" longer than chart dimension. THE FINISHED TURNED BARREL The finished turned barrel is to approx. chart dimensions within a few thousandths. It will have been finish centered accurately on a lathe and turned to dimension and then belt sanded with the final grit size being 180. It also comes to you 1-1/2" over length. THE FINISHED, THREADED AND CHAMBERED BARREL Here we use the finish turned barrel above and then cut the proper thread for the action involved, chamber for the cartridge ordered and crown the barrel. The chamber in this barrel is finished in the sense that a finishing reamer is not required. You must however make a slight cut on the breech with a lathe and have a method of gaging headspace. DO NOT FIRE this barrel without making this adjustment. A set of instructions will be enclosed in the package. Be sure that you do not throw it away with the wrapping material. GRADES OF BARRELS AVAILABLE Standard grade is a barrel that meets our dimension specifications but may have a minor amount of curvature. Truly, however, I see barrels in our scrap that are straighter than most factory barrels. A PREMIUM grade barrel is one that has been judged straight in checking. It will be marked with the symbol XX to designate this. AIR GAGED QUALITY In the process of checking our barrels all are checked with air gaging equipment. In so doing we find some that are more uniform than others. Those that measure.0001" or less variation from one end to the other are classed as air gaged. This does not mean that should you order a barrel of a lower quality grade that you might not receive a barrel that would have graded AIR GAGE but it does mean that if you specify AIR GAGE you will get a barrel with the tolerance indicated above. You will find that most of our basic barrels are marked for the muzzle end. In the process of air gaging we mark the tight end as being the muzzle. Some people feel that the taper should be to the muzzle, others say that it makes no difference. At any rate the barrel is marked so the choice is yours. PISTOL BARRELS Many handgun shooters are having great success with DOUGLAS barrels. We do NOT install these barrels. We do supply basic blanks in chrome moly only, to pistolsmiths and gunsmiths who do cut and fit these blanks to handguns. We do no pistolsmithing with the exception of some silhouette barrels (See below). SILHOUETTE BARRELS FOR HANDGUNS Silhouette shooting with handguns is becoming very popular. Most barrel makers are supplying a single shape for this purpose. We have been supplying our regular sporter shapes and the customers have been cutting to 15" or whatever the customer desires. This allows a choice of weights so as to match stock, action and sights to weight limits. We will fit barrels and supply FTC barrels in suitable calibers for the Remington XP100 action only. Price is the same as for a rifle barrel. SILHOUETTE and super magnum shape - This barrel shape was developed for silhouette shooting and high pressure 45 caliber cartridges. In the silhouette adaptation the breech diameter is always 1.200" muzzle diameter 750" and an O.A.L. of 24" to meet the weight requirements of this sport. The barrel used with the 458 cartridges will have an appropriate diameter for the action involved. This barrel is available in lengths from 22" thru 26". All these barrels have our sporter profile. Weight of the silhouette barrel is approx. 4 lbs. 7 ½ oz. NOTE: You must cut 1 ½ off of the muzzle of all BASIC, PRET and FT barrels.