Products compatibility information

20082009 Products compatibility information Compatibilities are subject to change without prior notice. Issued on February 11, 2008 SHIMANO INC.

Drivetrain Interchangeability Rear drivetrain for Comfort & MTB Components When using components of different series together, be aware of the points given below. 9speed Drivetrain CSM970 CSM970 CSM770 CSHG809 CSHG619 CSHG509 CSM970 CSM770 CSHG809 CSHG619 CSHG509 CSHG809 * : Close ratio setting 8Speed LinkGlide CS6500 CSLG50 bd be as au au au ba aq ar ar ar bg CS CS LinkGlide cassette sprocket 8speed 1234 T 1134 T 1132 T 1128 T 1225 T 1123 T RDM972 RDM971 RDM970 RDM772 RDM771 RDM770 RDM662 RDM531 RDM530 RDT661 RDM810 CN7701 CNHG93 CNHG73 CNHG53 RDC810 8speed rear derailleur * * RD CNHG73 CNHG53 CN Mega9 chain Super Narrow HG The full performance of LinkGlide will not be realized in combinations other than these. Also, HG performance will be reduced if RDC810 is used with HG gears other than LinkGlide gears. LinkGlide shifting performance is achieved when combined with STC503A(R) as the shifting lever. RD CN Drivetrain Interchangeability 85

Drivetrain Interchangeability 8Speed HG 7speed HG 7speed HG/ZH 6speed HG/ZH CSHG508I 1128T/ 1130T/1132T CSHG30I7 1128T CSHG30I MFHG37 MFTZ07 MFTZ21 MFHG407 MFTZ37 MFTZ31 MFTZ06 MFTZ20 MFTZ36 MFTZ30 CS CSHG408I 1130T/1132T/1134T CSHG308I 1130T/1132T/ 1134T * The rear derailleur for 8speed can also be used for 7speed drivetrain. CS 8speed HG cassette sprocket 7speed HG cassette sprocket MF /CS MF 1128T 1428T 1434T 1428T 1334T RDM410 (SGS) RDM360 (SGS) RDM310 RDM360 RDM310 RDFT30 RDT300 RDT71 RDT51 RDT31 RDFT30 RDTY18 RDTZ50 RDT71 RDT51 RDT31 RD RD 8speed 7speed rear derailleur RD Smart Cage (Front single) 7speed/MGS Low normal 7/6speed/ "SMARTCAGE" Top normal (Front single) 6speed GS/SS 7/6speed/ "SMARTCAGE" Top normal CNHG50 CNHG40 CNHG50 CNHG40 CNHG50 CNHG40 CNUG51 RD CN HG chain CN CN HG chain HG/UG chain 86

Rear drivetrain for Road bike components DURAACE ULTEGRA 105 10Speed TIAGRA SORA 9Speed 2200 series 8Speed ST7900 ST7801 ST6600G ST6600 ST5600 ST5600L STR700 STR600 ST4500 ST3400 STR500 ST2200 ST RD CS CN FH RD7900 RD7800 RD6600G RD6600 RD5600 RD5600L RD4500 RD3400 RD2200 CS7900 (1128T) 10speed CS7900 (1121, 1123, 1125, 1225, 1227T) CS7800 CS6600 CS5600 (11, 12T TOP) CS6600 (13, 14, 15, 16T TOP) 9speed CSHG509 8speed CSHG508 CN7900 CN7801 CN6600 CN5600 CN7701 CNHG93 CNHG73 CNHG53 CNHG50 Note: CS6600; Do not use front triple chainwheel with 14, 15, 16 top sprockets combination. FH7900 FH7850 FH6600 FH5600 FH4500 FH3300 FH2200 FHR505 Drivetrain Interchangeability 87

Drivetrain Interchangeability Interchangeability for flat handlebar Rear system DURAACE ULTEGRA 105 10Speed DURAACE ULTEGRA 105 TIAGRA 9Speed SORA 2200 8Speed Front system DURAACE ULTEGRA 105 10Speed DURAACE ULTEGRA 105 TIAGRA SORA 9Speed SLR770 ST / SL SLR660 SLR440 SLR4408 STR221 SLR770 SLR661 SLR441 RD7900 RD7800 RD6600G RD6600 RD5600 RD5600L RD7900 RD7800 RD6600G RD6600 RD5600 RD5600L RD4500 RD3400 RD2200 FDR770 FDR7732 FDR7730 FDR440 CS7900 CS7800 CS6600 CS5600 CS7700 CS6500 CSHG709 CSHG509 CSHG508 FC7800 FC7800C FC6601G FC6650 FC6650G FC6600 FC5650 FC5650L FC5600 FC5600L FCR700 FCR600 FCR550 CN7900 CN7801 CN6600 CN5600 CN7701 CNHG93 CNHG73 CNHG53 CNHG50 CNHG40 SMFC7801 SMFC7800 SMFC6601 SMFC6600 SMFC5600 SMFC4500 BBES25 BBES25 FH7900 FH6600 FH5600 FH4500 FH2200 FHR505 Note: CS6600; Do not use front triple chainwheel with 14, 15, 16 top sprockets combination. Note: FHR505 O.L.D. 135 mm for disc brake frame. FDR453 RD CS CN FH ST / SL FD FC BB CN FC7803 FC6604G FC6603 FC4503 FC3403 SMFC4500 CN7801 CN6600 CN5600 FC5603 FCR553 FCR450 FC4500 FC4550 FC3450 FCR453 SMFC4500 CN7701 CNHG93 CNHG73 CNHG53 FDR443 for 524230T FCW (524230T) SORA 2200 8Speed STR221 SLR441 STR225 FDR440A FDR443A FCA050 BBUN26 CNHG50 88

Front drivetrain interchangeability (MTB front SIS) SPCM (TRIPLE) 9speed drivetrain CNHG73 CNHG53 Mega9 chain (Super narrow HG) FCM970 FCM970 FCM770 FCM660 FCT661 FCM542 FCM543K FCM532 FCM533K FCM521 FCM4438 FCM4428 FCM442 FCM771K FCM660 FCT661 FCM543K FCM532 FCM533K FCM521 FCM4438 FCM4428 FCM442 443224T 443222T 483626T FCM815 3622T FCM810 FCM665 FCM545 CN FC 3622T FCC810 463424T Rear 8speed FDM970 FDM970E FDM971 FDM970 FDM970E FDM971 FDM770E FDM770 FDM771 FDM771D FDM772 FDM773 FC FDM770 FDM772 FDM773 FDM665E FDM815 FDM817 FDM665 FDM665E FDM667 FDM660 FDM660E FDM661 FDM661D FDT6606 FDT6603 FDT6616 FDT6613 FDM660 FDT6606 FDT6603 FDT6616 FDT6613 FDM5306 FDM5303 FD FDM5306 FDM5303 FDM5316 FDM5313 FDM5116 FDM5113 FDM5106 FDM5103 FDM5316 FDM5313 FDM5116 FDM5113 FDM5106 FDM5103 FD FDC810 Di2 SPCM3 Drivetrain Interchangeability 89

Drivetrain Interchangeability HG triple (8 /7/6speed) FCM191 FCM151 FCM411 FCM361 FCM311 FCM191 FCM151 FCM411 FCM4108 FCM3618 FCM3118 FCM410 FCM361 FCM311 FCM191 FCM151 FCM191 FCM151 FC Rear 8/7 speed Rear 8/7 speed Rear 8/7 speed Rear 7/6 speed Rear 7/6 speed 423424T 483828T 423222T 483828T 423424T FDM190 FDM4136 FDM4133 FDM4126 FDM4123 FDM4136 FDM4133 FDM4126 FDM4123 FDM410E FDC051 FDC050 FDTY10 FDM3606 FDM3603 FDM3116 FDM3113 FDM3106 FDM3103 FDC102 FDM3606 FDM3603 FDM3116 FDM3113 FDM3106 FDM3103 * When using the front derailleur designed for a 7speed system on an 8speed system, the front derailleur plate may interfere with the chain even if it's installed correctly. FD 90

Front drivetrain interchangeability (Road bike components) DURAACE 7900 series DURAACE 7800 series ULTEGRA 6600 series Double 10Speed 105 5600 series DURAACE 7803 series ULTEGRA 6603 series 105 5600 series Triple 10Speed TIAGRA SORA Double 9Speed TIAGRA SORA Triple 9Speed 2200 Double 8Speed 2200 Triple 8Speed ST7900 ST7801 ST6600 ST6600G ST5600 ST5600L STR700 ST7803 ST6603 ST6603G ST5600 STR700 ST4500 ST3400 STR500 ST2200 ST2203 ST FD FC BB CN FD7900 FD7800 FD6600 FD6600G FD5600 FD5600L FD7803 FD6603 FD6603G FD5603 FD5603L FD4500 FD3400 FD4503 FD3403 FD4403 for 524230T FD2200 FD2203 FC7900 FC7950 FC7800 FC7800C FC6600 FC6601G FC6650 FC6650G FC5600 FC5600L FCR700 FCR600 FCR550 FC7803 FC6603 FC6604G FC5603 FC5603L FCR553 503930T FC4500 FC4550 FC4550S FC3450 FCR450 FC4503 FC3403 503930T FCR453 503930T FCW (524230T) FCA050 SMFC7900 SMFC7801 SMFC7800 SMFC6600 SMFC6601 SMFC5600 SMFC4500 SMFC4500 BBES25 SMFC4500 BBES25 BBUN26 CN7900 CN7801 CN6600 CN5600 CN7701 CNHG93 CNHG73 CNHG53 CN7401 CNHG90 CNHG91 CNHG70 CNHG50 Drivetrain Interchangeability 91

Drivetrain Interchangeability Front derailleur and Crankset The allowable combinations of front derailleurs depend on the difference in the number of teeth of the gears and the shape of the front derailleur plate. If the conditions given below are not satisfied, then the desired shiftability may not be obtained. FC (top gear) (low gear) = < FD (top and low capacity) FC (top gear) (middle gear) = > FD (minimum difference in teeth number between top and middle) Front derailleurs and the number of teeth for corresponding cranksets are given in the chart below. 9speed Triple FCFD compatibility Chain line 50 mm 47.5 mm 47.5 + t mm BB model no./structure 2pc type FC BBES25 (please refer chart as below for detailed combination) BBES25 126 BBUN26 LL123 (K) BBES25 (E) 118 (E) BBUN26 (E) LL113 (E) BBES25 (please refer chart as below for detailed combination) BBES25 126 BBUN26 LL123 (K) BBES25 121 BBUN26 117.5 BBES25 113 BBUN26 MM110 BBES25 121 BBUN26 117.5 BBES25K 121 BBUN26K 117.5 BBES25K 121 BBUN26K 117.5 FC model no. FCM970 FCM970 FCM770 FCM660 FCT661 FCM542 FCM543K FCM532 FCM533K FCM771K FCM660 FCT661 FCM543K FCM532 FCM533K FCM521 FCM4438 FCM443 FCM4428 FCM442 FCM521 443224 443222 483626 443222 483626 443222 483626 443222 483626 FDM970 FDM971 FDM771 FDM771D FDM661 FDM661D Chain line 50 mm 47.5/50 mm Chain stay angle 6669 6366 6669 6366 Top swing FD FDM970E FDM770E FDM660E FDM770 FDM660 FDT6606 FDM5306 FDM772 FDT6603 FDM5303 FDM5106 FDM5103 Down swing FD FDT6616 FDM5316 FDM773 FDT6613 FDM5313 FDM5116 FDM5113 443222 FCM4438 FCM443 FCM4438 FCM443 FCM4428 FCM442 FCM4438 FCM443 FCM4438 FCM443 FCM4438 FCM443 BB shell width 68 mm 73 mm MTB (without chain case) Trekking (with chain case) Etype ABBES25AKB21W (use with 1.8mm spacer) / ABBES25AKB21W (use without 1.8mm spacer) / ABBES25EB21 ABBES25B21 ABBES25AKB21 ABBES25C21 ABBES25EC21 92

9speed Double FCFD compatibility Chain line 54.3 mm 2pc type FC 46.8 mm 2pc type FC Front derailleur specifications Top gear teeth number TopMiddle min. teeth difference Capacity SPCM (Triple) FDC810 SPCM (46/34/24T) FDM4126 FDM3106 FDM4123 FDM3103 FDM4136 FDM3116 FDM4133 FDM3113 FDM3606 FDM3603 8 /7S FDM410E FDM330 FDM330E for top gear 42T 42/48T 10T 20T Crankset specifications Top gear Middle gear Low gear BB model no./structure FCM411 FCM410 FCM4108 FCM361 FCM311 FCM3118 42T 32T 22T For HG Chain FCM191 FCM151 42T 34T 24T FCM411 FCM361 FCM311 FCM191 FCM151 48T 38T 28T FCM810 FCM665 FCM545 FC model no. FCM815 3622 FDT301 FDC102 8 /7S FDC051 FDTZ31 FDTZ21 7 /6S FDM1906 FDC101E 8 / 7S FDC050 FDTZ30 FDTZ20 7 / 6S NOTE: When using the front derailleur designed for a 7speed system on an 8speed system, the front derailleur plate may interfere with the chain even if its installed correctly. How to set position for FC with bigger top gear chain ring in the same series. 1) set A 2) Check if outer plate and bigger chainring have clearance 3) Reposition height of FD in case problem at process (2) 48T 10T 20T 3622 42T 8T 18T Chain line 54.3 mm 46.8 mm Chain stay angle 6571 Top swing FD FDM815 FDM665 FDM665E FDM665E Down swing FD FDM817 FDM667 Drivetrain Interchangeability Gear teeth should come within this range ProSet gauge A ProSet alignment block 1 mm 3 mm 93

Drivetrain Interchangeability Front derailleur and Chain line The Shimano lineup for front derailleurs and the chain lines they support are given in the chart below. Front derailleur and chain line (MTB) ALIVIO DEORE ALIVIO ALTUS ACERA NEAVE Cseries Shimano front derailleurs, with the exception of some of the Cseries and the Tourney class, support chain lines of 47.5 and 50 mm. The Tourney front derailleurs and corresponding chain lines are given in the chart below. FDTY10 FDTZ31 FDTZ30 FDTZ21 FDTZ20 FDM410E FDM511 /M510 FDM4136 /M4133 FDM4126 /M4123 FDM3116 /M3113 FDM3106 /M3103 FDM3606 / M3603 FDM330D6 /T6 FDM330E FDC810 / C505 FDT301 FDC101E FDC102 FDC050 FDC102 Ø 28.6 (S) Ø 31.8 (M) Ø 34.9 (L) 47.5/50 mm the chainstay angle should be between 66 and 69 For the Etype (BB mounting front derailleur): 47.5 mm (shell width of 68 mm) 50 mm (shell width of 73 mm) 50 mm (shell width of 68 mm) 47.5 mm (shell width 68 mm), 50 mm (shell width 73 mm) 47.5 mm 50 mm For the Etype (BB mounting front derailleur) 47.5 / 50 mm With seat tube of diameter 34.9 mm (L), the chainstay angle should be between 66 and 69 For the Etype (BB mounting front derailleur): 47.5 mm (shell width of 68 mm) 50 mm (shell width of 73 mm) For the Etype (BB mounting front derailleur): 47.5 mm (shell width of 68 mm) 50 mm (shell width of 73 mm) Front derailleur and chain line (Tourney) Ø 28.6 (S) Ø 31.8 (M) Ø 34.9 (L) 73 mm shell width /66 and 69 94

Crankset, Bottom bracket, and Chain line In order to use SIS to its full extent, the required correct chain line, along with the crankset and bottom bracket required to obtain that, are given in the chart below. Comfort bike and MTB Components (Separate type FC/BB) Crankset Bottom Bracket Chain line & Axle mark Speed Series Type of Crank Model No. Model NO. 47.5mm 50.0mm 52.5mm 47.5+tmm Spline Square Chaincase FCM521 * BBES25AK ** FCM4438 BBES25(K) 121 126 121K 9 NonSeries FCM443 BBUN26(K) 117.5 LL123(K) 117.5K FCM4428 BBES25(E) 113 118(E) FCM442 BBUN26(E) MM110 LL113(E) 8 NEAVE FCC810 * BBUN26 130 FCM411 (48T) * BBUN26(K) LL123(K) FCM4108 BBES25(E) 118(E) Alivio FCM411 * BBUN26(K) LL123(K) FCM410 BBUN26(E) LL113(E) 8 / 7 FCM3618 (42T) BBES25(E) 126 FCM361 (42T) Acera FCM361 (48T) * BBUN26(K) LL123(K) Altus FCM31142T FCM31148T FCM3118 * BBES25(K) 126(K) FCM191 8 / 7 /6 NonSeries BBUN26(K) DNL(122.5) DNL(122.5) FCM151 Note: If using a chain case, select a BB (K)/K bottom bracket. : Yes If using an Etype front derailleur, select a BB (E) bottom bracket. * : Chain case stay thickness should be 1.5 mm to 2.1 mm. ** : Please refer to page 88 for detailed combination. Note: FCC810: Use super narrow HG 9speed chain. FCM521: Use 121AK with 1.8 mm spacer if no chain case used. Capreo series components The combinations of the front chainwheel and the bottom bracket to obtain proper chain line, which are necessary for the SIS (= Shimano Indexed System) to function well, are presented in the following chart. Series Capreo Model No. FCF700 FC BB Chain Line & Axle mark type of Crank Model No. 46.0 48.5 50.0 Spline Square Chaincase mm mm mm BBUN26 MM110 LL113 YL117 BBUN26K Note: This specification can be used without the chain case as 52.5 mm chain line. In that case, a space is to be left between the shell and the adapter on the left side of the BB, but there is no problem in actual use. 52.5+t mm *117.5 : Yes Drivetrain Interchangeability 95

Drivetrain Interchangeability Chain, Chainring and Cassette sprocket The allowable combinations for the Shimano chain (CN), chainrings (FC), and cassette sprockets (CS) are given in the chart below. These chains are available in order to match the type of drivetrain. Select the combination you desire after checking the chart below. Chain FC/CS 622 15C 9speed Narrow chain CN7701 CNHG93 CNHG73 CNHG53 HG Chain CNHG50 CNHG40 Cassette sprocket 9speed HG CSM970 CSM770 CSHG809 CSHG619 CSHG509 Crankset FCM970 FCM810 FCM815 FCM770 FCM771K FCT661 FCM660 FCM665 FCM545 FCM542 FCM533K FCM532 FCM521 FCM443 FCM442 Cassette sprocket CSLG50 LG Crankset FCC810 Good Good Good Good Not good Not good Not good Not good Applicable Wheel Models WH7850C50CL /7850C24CL/7801/7800/ RS80 /6600G/ 6600S/5600/R580/R561/R560/R550/R500 / RS30 / RS20 / RS10/3N71Road Cassette sprocket CSHG408I CSHG508I CSHG30I CSHG308I Not good Good HG Crankset FCM410 FCM411 FCM361 FCM311 FCM191 FCM151 Not good Recommendation of the Rim Tape Sizes for Shimano Wheels Rim Sizes 622 13C WH7701/7700/6500/R540/R535 Good Recommended Rim Tape Size 16622 18622 571 15C WHR550650C 18571 622 17C WHS500 18622 622 19C WHS500V/8R25/T565/T560/3N71N/3N71T 20622 559 19C WHM565/M505 20559 559 18C WHM959/M575/M540/M535 20559 Road Tubeless WH7850C24TL /7850SL/7801SL/ RS60 Never use rim tapes 96 MTB UST WHM975/M970/M965/ MT75/ M778 /M776/ M775 / M770/M765 Never use rim tapes

Spoke protector Select the spoke protector after checking the chart below. It is decided by hole number of hub and number of the gear teeth, other than multiple freewheel. Speed 9 8 7 6 9 8 7 Model No. Road gear CSHG619 CSM970 CSHG509 CSM770 CSHG809 CS6500 CSHG608I CSHG508I CSHG408I CSHG308I CSHG50I CSHG30I MFHG407 MFHG37 MFTZ37 MFTZ31 MFTZ07 MFTZ21 MFZH06 METZ30 MFTZ06 MFTZ20 CSM970 CSHG509 CSM770 CSHG608I CSHG508I CSHG408I CSHG308I CSHG30I7 For Shimano Wheel Low gear number Spoke hole number Rigth hand 21 23 24 25 26 27 28 30 32 34 flange (mm) 24 28 32 CPWH71 CPWH10/11 CPWH12/13 CPWH14/15 CPWH23 CPWH20A CPFH02/35 53.8 70.6 CPFH06 CPFH06 CPFH31 CPFH76 CPFH75 CPFH76 CPFH76 CPFH76 CPFH76 CPFH76 CPFH08 CPFH08 CPFH08 CPWH12 CPWH13 CPWH12 CPFH40 CPWH12 CPFH40 CPWH12 CPFH40 CPWH12 CPWH12 CPFH40 CPWH12 CPFH05 CPFH05 CPFH35 CPFH56 CP32H2 CPFH35 CPFH56 CPFH05 CPFH56 CPFH35 CPFH56 CPFH35 CPFH56 CPFH35 CPFH56 CPFH56 CPFH35 CPFH56 CPFH76 CPFH75 CPFH76 CPFH76 CPFH76 CPFH76 CPFH76 36 CPFH06 CPFH06 CPFH31 CPFH53 CP36H2 CPFH50 CPFH53 CPFH06 CPFH53 CPFH31 CPFH53 CPFH31 CPFH53 CPFH31 CPFH53 CPFH53 CPFH50 CPFH53 CPHG22 CPHG22 CPHG22 CPHG22 CPHG22 CPFH76 CPFH75 CPFH76 CPFH76 for WH7701carbon /7701/R540 * for WHM965 /M765/M565 /M540 /T565 /T560 * for WHM505 * for WHM975 /M970/MT75 /M776 /M775/M770 CPFH76 CPFH76 CPFH76 for WH7850C50TU /7850C24TU /7850C50CL /7850C24TL /7850C24CL /7850SL /RS80 /RS60 /RS30 /RS20 /RS10 for WH7801carbon50 /7801carbon /7801SL /7801 /7800 /6600G /6600S /5600 /R601 /R600 /R580 /R561 /R560 /R550 for WHR500A /R500 Drivetrain Interchangeability * Compatible cassette sprocket CPWH11 /WH13/ WH15: for CSM770 (1132T/1134T) CPWH10 /WH12/ WH14: for CSM970 (1132T/1134T/ 1234T) CSHG809 (1132T/1134T) CSHG619 (1132T/1134T) CSHG509 (1132T) 97

Drivetrain Interchangeability Spoke protector for Capreo Choose an appropriate spoke protector in the chart below. FHF700 FH 24H 32H 36H Spoke Protector CPFH35 /FH31 CPFH35 CPFH31 Cassette sprocket, Rear freehub and Wheel Cassette sprocket compatibility will differ depending on the freehub (FH) and wheel (WH) used. Type 10speed standard 10speed JUNIOR 9speed Model no. CS7900 CS7900 CS7800 CS7800 CS7900 CS7800 CS6600 CS5600 CS6600 CSHG509 Tooth 11 25T 11 27T 11 28T 11 21T 12 21T 11 23T 12 23T 12 25T 12 27T 11 23T 11 25T 12 25T 12 27T 13 25T 14 25T 15 25T 16 27T 11 25T 12 23T 12 25T 13 25T 14 25T WH7850 Series FH7900 FH7850 FH6600 WH5600 8/9speed freehub WHRS80C24CL WHRS60C24CL WHRS30C24CL WHRS20 WHRS10 WHR500 Be aware that freehub (FH) and wheel (WH) compatibility with CS6600 might differ depending on the tooth combination. A 1 mm spacer is required when combining CS7800 and CS6600 (except junior types) with a 8 /9 speed freehub (FH) and FH7850 /6600. = Yes Deep serration WH6600G WH6600 WHR601 = No Spacer 8/9 speed freehub and FH6600 /5600/4500 CS7800 and CS6600 (all) FH7850 CS7800 (all) CS6600 (Standard 11T and 12T top gear combinations) CS5600 (all) Deep serration WH6600/R601 Shallow serration No! Shallow serration CS6600 (13, 14, 15, 16 top gear combinations for JUNIOR type) *The serration depth is the same as for the 8 and 9 speed cassette sprocket. FH7850/6600/5600 8/9 speed FH/WH 98 Note: CS6600 (14 25, 15 25, 16 27) cannot work with tripple front drive system. If combine, bad shifting performance could be happend.

Disc brake Combination Chart (Hydraulic Disc) Shimano Hydraulic Disc Brake combination chart In order to realize the best performance, we recommend that the following combination be used. Series Caliper Mount type Brake Lever Roter PAD (option) Hose TR BRM975 BRM975P International standard Post mount*2 SAINT BRM810 Post mount*2 BLM810 SMRT75 SMRT78 D02S Metal Deore T STM775 SMRT78M BRM775 BLM775 SMRT78L A01S Resin Post mount*2 SMRT79 (M06S Metal) STM776 SMRT79M BRM776 *1 BLM776 SMRT79L SL BRM665 Post mount*2 BLM665 SMRT62 A01S Resin SMRT62M SMRT62L (M06S Metal) SMRT64 Deore BRM535 Post mount*2 STM535 SMRT64M M07S Resin BLM535 SMRT64L (M06 Metal) SMRT75 ALFINE BRS501 Post mount*2 BLS500 BLS502 SMRT64 A01S Resin BRM575 Post mount*2 BLM575 SMRT61 B01S Resin SMRT62 (E01S Metal) SMRT64 Nonseries SMRT53 SMRT53M BRM486 Post mount*2 BLM486 SMRT53L B01S Resin SMRT51 SMRT51M *1: For banjo type joint *2: Available for international standard with mount adapter *3: Rear only Rotor Specification STM975 BLM975 SMRT97SS*3 SMRT97 SMRT97M SMRT97L SMRT75 M07Ti Resin (M06Ti Metal) Series Model No. Outside Diameter CENTERLOCK System Oversized PCD CENTERLOCK System 44 mm SMRT97SS*3 140 mm TR SMRT97 160 mm SMRT97M 180 mm SMRT97L 203 mm SAINT Deore T SL Deore L Deore Deore MC MC SMRT78 / RT79 160 mm SMRT78M/ RT79M 180 mm SMRT78L/ SMRT61 160 mm 203 mm SMRT62/ RT64 160 mm SMRT62M / RT64M 180 mm MC SMRT62L / RT64L 203 mm RT79L SMRT53 160 mm SMRT53M 180 mm SMRT53L 203 mm SMBH59 SMBH80SB SMBH59 SMBH63 SMBH59 SMBH59 SMBH59 SMBH59 SMBH59 Disc brake Nonseries SMRT75S 160 mm SMRT75MA 180 mm SMRT75DH 203 mm SMRT51 160 mm SMRT51M 180 mm : Yes 99

Hose material & length Disc brake Series SAINT TR Deore T SL Combination Chart (Mechanical Disc) Shimano Mechanical Disc Brake combination chart In order to realize the best performance, we recommend that the following combination be used. Series Nonseries Mechanical Disc brake and Brake lever interchangeability Model No. Caliper Mount type Brake Lever Rotor PAD BRM495 * BRR505 2 finger * ** BL type BL type 4 finger Vbrake BL (1.52.5 finger) Road lever SMRT53 SMRT53M /RT53L SMRT51 /RT51M For resin pad only SMRT62 * Front mount: International standard /Post mount Rear mount: International standard ** Front & Rear mount: International standard Deore BRM495 BRM416 Model No. BRR505 Model No. SMBH80 SMBH59 SMBH59 BRM416 Good MC MC Compatible brake lever & caliper BLM810 BRM810 STM975/BRM975 BLM975A STM775/BLM775 BRM775 BLM665/BRM665 BLM575/BRM575 BLM486/BRM486 BLT605/BRT605 BLS500/ BRS501 MC STM535/BRM535 BLM535 Not good Material Resin Road ST/BLR770/BLR550/STR221 / STR225 for Front Hose length (mm) 8501000 (evely 50 mm) 4 finger w/modulator w/smpm50 Good for Rear 14001700 (evely 50 mm) 900, 1300, 1700 mm 900, 1300, 1700 mm Cutable Cutable Cutable M08 Resin M06 Metal 100

VBRAKE and Cantilever brake Interchangeability between brake systems Depending on the brake and brake lever combination to be used, the relationship between the input at the brake lever and the actual braking force output at the wheels is very easily affected. Be very careful when combining a brake and brake lever. Incorrect combinations can cause accidents or insufficient braking forces due to improper cable strokes. Be sure to carefully consult the chart below and select the brake and the matching brake lever. Brake levers VBrake Levers STM970 BLM970 STM770 BLM770 STM410 BLM740 STM405 BLM571 STM360 BLM511 STEF60 BLM421 STEF50 BLM70 STEF40 VBrake Levers BLM771 STT660 BLT660 Brakes Nexus/NEAVE (Trekking bike lever) STC503A BLC800 STT300S BLT400 STM405 (4finger) BLIM65 STM360 (4finger) BLIM60 STEF60 (4finger) STEF50 (4finger) SB8S20 ST8S20 Levers for Cantilever Brake and Roller Brake BRM970 BRM770 BRT660 No! No! No! BRM530 BRM432 BRM422 BRM70 VBRAKE With power modulator model BRT660 with SMPM70 BRM422 with SMPM40 No! Cantilever Brake Roller Brake Note 1 No! : Yes VBRAKE and Cantilever brake No! The NO! symbols indicate combinations that should not be used under any circumstances. Note 1: This combination will not provide the sufficient amount of braking force. 101

VBRAKE and Cantilever brake Brake component interchangeability Four finger brake levers such as STT300 /STEF60/STEF50/SB7S45/BLIM45/STR221/R225/R223 brake levers are equipped with a switch to change between the VBrake with modulator mode (BRT300 and BRM420 with SMPM40) and the caliper brake, cantilever brake or roller brake mode. For VBrake (with power modulator) mode Vposition V C R V VBrake with power modulator Vbrake + SMPM40 VBrake without power modulator Roller brake / Cantilever brake / Caliper brake For Caliper brake/cantilever brake/roller brake Caliper / Cantilever/Roller (C R) brakeposition V V C R C R VBrake with power modulator Vbrake + SMPM40 VBrake without power modulator Roller brake / Cantilever brake / Caliper brake Good Not good Not good Not good Not good Good WARNING: If the mode is not matched to the type of brake being used, this could result in inadequate or excessive braking power. Please proceed with caution when selecting the correct mode for the corresponding brake. 102

NOTE: SI37J0A001 NOTE: of shifting. approximately 2.1. SI37J0A001 Inter8 and Small parts Nexus Inter8/Alfine Small Parts Kit Specification Assembly requirement and order General Safety Information WARNING To avoid serious injuries: When installing the hub to the frame, be sure to install the correct nonturn washers to the left and right sides, and securely tighten the hub nuts to the specified torques. If the nonturn washers are installed to one side only, or if the hub nuts are not tightened sufficiently, the nonturn washer may fall out, which could cause the hub axle to rotate and the cassette Obtain and read the service instructions carefully prior to installing the parts. Loose, worn, or damaged parts may cause serious injury to the rider. We strongly recommend only using genuine Shimano replacement parts. Read these Technical Service Instructions carefully, and keep them in a safe place for later reference. You can shift gears while pedaling, but on rare occasions the pawls and ratchet inside the hub may produce some noise afterwards as part of normal gear shifting operation. The 8speed hub has a builtin mechanism to support shifting. When this support mechanism operates during shifting, noise or vibration may occur. The shifting feel may also change depending on the gear position at the time of shifting. Noise may also be generated if the crank arms are turned backward or if the bicycle is pushed backward when the gear position is 5, 6, 7 or 8. It is recommended that you set the chainrings so that the gear ratios are approximately 2.1. Example: F36T R16T, F38T R18T, F46T R22T SG8R31 SG8R36 CJ8S20 Technical Service Instructions Service instruction Recommended combination between hub and small parts kit Inter8 Hub Cassette joint Hub body SG8R31/36 SG8R56 Cap nut SG8R31/36"R" SG8C31 SG8C31"R" SGS501 SG8C56 SG8R20/25 SG8C20 NTW HRB Arm clip Service instruction General Safety Information WARNING To avoid serious injuries: When installing the hub to the frame, be sure to install the correct nonturn washers to the left and right sides, and securely tighten the hub nuts to the specified torques. If the nonturn washers are installed to one side only, or if the hub nuts are not tightened sufficiently, the nonturn washer may fall out, which could cause the hub axle to rotate and the cassette Obtain and read the service instructions carefully prior to installing the parts. Loose, worn, or damaged parts may cause serious injury to the rider. We strongly recommend only using genuine Shimano replacement parts. Read these Technical Service Instructions carefully, and keep them in a safe place for later reference. You can shift gears while pedaling, but on rare occasions the pawls and ratchet inside the hub may produce some noise afterwards as part of normal gear shifting operation. The 8speed hub has a builtin mechanism to support shifting. When this support mechanism operates during shifting, noise or vibration may occur. The shifting feel may also change depending on the gear position at the time Noise may also be generated if the crank arms are turned backward or if the bicycle is pushed backward when the gear position is 5, 6, 7 or 8. It is recommended that you set the chainrings so that the gear ratios are Example: F36T R16T, F38T R18T, F46T R22T SG8R31 SG8R36 CJ8S20 Technical Service Instructions Inter8 Hub Cassette joint C B C B B B B RH dust cap Hub body (HRB version) Hub body (Coaster BR version) Cap nut Snap ring RH dust cap Driver cap C J fixing ring Sprocket Cap nut C J Snap ring Driver cap NTW NTW CJ C J fixing ring NTW SM8S31 Cap nut CJ, NTW: Several variation available. SM8S56 B SM8R20 B SM8C20 Inter8 and Small parts SG8R22/27 SG8C22 C SM8R22 C SM8C22 SG8R30/35 SG8R30/35"R" SG8R45/55 SG8C45 C SM8S30 B SG8S30"R" B SM8R20 / 8C20"" SGS500 B * * SMS500 * : Only 8R /8L nonturn washer come with SMS500. 103

Inter8 and Small parts Inter8 and Small Parts interchangeability chart Service instruction Service instruction Right hand dust cap SM8S31 SM8S56 SM8R20 SM8C20 SM8R20 / 8C20"" SM8R22 SM8C22 SM8S30 SM8S30"R" SMS500 Right hand dust cap SM8S31 SM8S56 SM8R20 SM8C20 SM8R20 / 8C20"" SM8R22 SM8C22 SM8S30 SM8S30"R" SMS500 SI SI B B C C SG8R31/ 36 * 1 * 1 * 1 * 1 * 3 * 3 * 1 SG8R20 / 25 * 5 SG8R31/ 36 "R" * 1 * 1 * 1 * 1 * 3 * 3 * 1 Internal Hub Gear SG8C31 SG8C31 SG8R56 SG8C56 SGS501 "R" * 1 * 1 * 1 * 1 * 3 * 3 * 1 * 1 * 1 * 1 * 1 * 3 * 3 * 1 * 6 * 2 * 2 * 1 * 2 * 2 * 4 * 4 * 2 * 6 * 2 * 2 * 2 * 2 * 4 * 4 * 2 * 1 * 1 * 1 * 1 * 1 * 1 * 3 * 3 * 1 SG8C20 SG8R22 / 27 SG8C22 SG8R30 / 35 SG8R30 / 35 "R" SG8R45 / 55 SG8C45 SGS500 * 5 * 5 * 6 * 6 * 6 * 6 * 5 * 5 * 1: No need Right hand dust cap B or C and SI. * 2 : No need Right hand dust cap B or C, SI and Cassette Joint. * 3 : No need Right hand dust cap B or C. * 4 : No need Right hand dust cap B or C, Cassette Joint. * 5 : Need SI * 6 : No need Cassette Joint. SM8S31: w/o SI, and Right hand dust cap. SM8S56 : For Cyber Nexus specification. w/o SI, and Right hand dust cap and Cassette Joint set (Driver cap/cj fixing ring /CJ). SG8R30/35"R": For specifications with reverse assembly of sprocket (19T and smaller). SM8S30"R": For specifications with reverse assembly of sprocket (19T and smaller). SM8R20/8C20"": For Cyber Nexus specifications, not including SI, as SI is included in SC8C40. * 5 * 5 * 5 * 5 * 5 * 5 Internal Hub Gear * 6 * 6 * 6 * 6 * 5 104

Hub roller brake Interchangeability between hub and roller brake Hub roller brake and Front hub w/modulator Model No. Modulator Level Type BRIM75F BRIM70F BRIM50F BRIM41F HBIM70 Hyper QR not good not good Hub roller brake HBIM40 Normal NUT : Recommended combination : Usable Hub roller brake and Hub Dynamo w/modulator Model No. Modulator Level Type BRIM75F BRIM70F BRIM50F BRIM41F Hyper DH3R30 Normal DH2R30E Hyper Normal QR not good not good NUT not good not good QR NUT NUT NUT not good not good : Recommended combination : Usable 105

Brake shoe Brake shoe (for VBrake and Cantilever brake) Brake/Shoe Iineup M70R2 M70R2 (Severe Condition shoe) Shoe characteristics Ceramic M70T3 M70T4 M70CT4 (Severe Condition shoe) M65T3 M65T4 S70C S70C (Severe Condition shoe) BRM970 Standard Option BRM960 Standard Option BRM770 Standard Option Low noise Option Standard BRT660 Option Option Standard BRM530 Option Option Standard BRM432 Option Standard BRM422 Option Option Standard BRM70 Option Option Standard BRR550 Option Option Standard Cartridge shoe Msystem Length Threaded shoe post M70R2 70 mm M70R2 (Severe Condition shoe) Brake shoe characteristics A race shoe that performs well in dry and wet conditions, and is also highly resistant to wear. may give off noise. 70 mm +1mm thicker shoe with M70R2 Ceramic 70 mm Specific shoe for ceramic rims. M70T3 70 mm M65T3 65 mm M70T4 70 mm M65T4 65 mm M70CT4 (Severe Condition shoe) 70 mm Cartridge shoe with M70T4 S70C 70 mm S70T 70 mm S65T 65 mm S70C (Severe Condition shoe) Brake shoe (Capreo) 70 mm +1mm thicker shoe with S70C S70T Performs especially well in wet conditions and may pass DIN standards. Gives off less noise, but the pad is heavier, faster rim wear, and tends to fade. Only for side wall machined rims. Performs especially well in wet conditions and may pass DIN standard. Tend to be low noise, low rim wear and fade. Performs well in dry conditions and tends to be low noise. Wears in muddy conditions. : Yes S65T < Shoe characteristics > Shoe Cartridge shoe Msystem Length Thread Shoe Post Brake Shoe Charectristic R55C (for F700) 55 mm Performs well in wet conditions and may pass DIN standards. Tends to be low noise. But faster rim wear. : Yes 106

Brake shoe (for road bikes) < Brake/Shoe Iineup > DURAACE BR7900 Standard Option Option Option BR7800 Standard Option Option ULTEGRA BR6600 / 6600G Standard Option Option 105 BR5600 / 5600L Standard Option Option TIAGRA BR4500 Standard SORA BR3400 Standard BR3300 / 3300A Option Standard Nonseries BRR650 BRR560 Standard Standard Option Option BRR450 Standard < Shoe characteristics > Cartridge shoe R55C2 55 mm R55C for Carbon rim R55C for Ceramic rim Msystem Length Brake shoe characteristics R55C3 55 mm Performs well in dry and wet conditions. 55 mm For Carbon rim 55 mm M50T 50 mm R50T R55C3 R50T2 R55C2 50 mm 50 mm R55C for Carbon rim R55C for Ceramic rim Performs well in dry conditions and tends to be low noise. Highly resistant to wear in rainy conditions. For Ceramic rim only M50T Performs well in wet conditions. But faster rim wear. R50T R50T2 Performs well in dry conditions and tends to be low noise. Wears in rainy conditions. Performs well in dry conditions and tends to be low noise. Wears in rainy conditions. Toein adjust design. : Yes Brake shoe 107

Brake pad Brake pad lineup (for disc brake) The number of * mark shows better performance. Model No. Type A01S Resin M06Ti M06 M07Ti M07S B01S M08 E01S D02S Metal Metal Resin Resin Resin Resin Metal Metal AType BType EType DType Characteristics MC MC Pad Shape Type Titanium Back plate BRM975 BRM975P Hydraulic BRM810 Hydraulic BRM775 BRM776 BRM665 BRM535 BRT605 BRS501 BRM575 BRM486 BRM416 BRM495 BRR505 Disc brake caliper and Rotor compatibility Caliper BRM975P BRM975 BRM776 BRM775 BRM665 BRM535 BRM810 BRT605 BRS501 MC MC BRM575 BRM575 BRM486 BRM495 BRM416 BRR505 Modulation Power Durability Antifading Silence Hydraulic Hydraulic Hydraulic Hydraulic Hydraulic Mechanical Mechanical Mechanical Pad material Metal /Resin Metal Resin Metal Resin Metal **** **** **** **** *** *** *** **** **** *** **** *** *** **** **** *** *** *** *** Standard Standard Option SMRT97 SMRT79 SMRT78 SMRT75S SMRT64 SMRT62 SMRT61 SMRT61 SMRT53 SMRT51 Option Option Standard Standard Standard Rotor 160 180 203 SMRT97M SMRT79M SMRT78M SMRT75MA SMRT64M SMRT62M SMRT53M SMRT51M Standard Standard Standard Standard SMRT97L SMRT79L SMRT78L SMRT75DH SMRT64L SMRT62L SMRT53L **** **** *** *** Option SMRT97 SMRT79 SMRT78 SMRT75S SMRT64 SMRT62 SMRT61 Standard 108 * Suitable mount adapter is necessary according to your frame mount style. * SMRT51/ RT51M /RT53/ RT53M /RT53L are compatible with Resin pad caliper specification only. If use with caliper with metal pads, rotor will be easily damaged. * When using 140mm rotor, braking power is less than 160 mm. Please confirm the power is enough for your purpose. * 140mm RT, SMRT97SS is recommended only for rear wheel with BRM975 F160/R140 caliper. * Durability of B/E type pad become shorter when the pad is used with narrow type rotor.

Disc brake mount adapter Disc brake mount adapter application How to read Model No. Mount adapter Small parts Rotor size SMMAF 203 S/P Caliper mounttype S = IntAstandard P = Post Front = F Rear = R Mount adapter / Model No. SMMAF203S/S SMMAF203S/P SMMAF203S/B SMMAF203S/Z SMMAF203P/S SMMAF203P/P SMMAF203P/B SMMAF203P/Z SMMAF180S/S SMMAF180S/P SMMAF180P/S SMMAF180P/P SMMAF170S/P SMMAF160P/S SMMAF160P/Z SMMAR203S/S SMMAR203P/S SMMAR180S/S SMMAR180P/S SMMAR160P/S Suspension /Frametype International Astandard = S Post = P Boxxer = B Marzocchi 20 mm Axle = Z (QR 20 PlusDH INTL STD) Disc brake mount adapter 109

Disc brake mount adapter Disc brake mount adapter application table < Postmount caliper > FRONT REAR Fork & Frame mount style Postmount Standard A MARZOCCHI 20 mm Thru ** BOER Standard A Fork & Frame mount style 140 SMMAF160P / S *: BRR505 is not available. **: Latest MARZOCCHI 20 mm thru axle forks are using postmount type disc mount. < TR caliper > FRONT REAR Postmount Standard A MARZOCCHI 20 mm Thru ** BOER Standard A Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Capliper Adaptor Rotor 160 180 203 No adapter needed * SMMAF160P / S SMMAF160P /Z * SMMAR160P / S SMMAF180P /P * SMMAF180P /S * SMMAR180P /S * SMMAF203P /P * SMMAF203P /S * SMMAF203P /Z * SMMAF203P /B * SMMAR203P /S * Rotor 140 160 180 203 BRM975P BRM975P BRM975P No adapter needed SMMAF180P / P SMMAF203P / P BRM975160F /140R BRM975160F /140R SMMAF180S / P SMMAF203S / P BRM975160F /140R BRM975160F /140R BRM975160F /140R No adapter needed SMMAF180S / S SMMAF203S / S BRM975P BRM975P BRM975P SMMAF160P / S SMMAF180P / S SMMAF203P / S BRM975180F No adapter needed BRM975160F /140R SMMAF203S / Z BRM975P BRM975P SMMAF160P / Z SMMAF203P / Z BRM975160F /140R SMMAF203S / B BRM975P SMMAF203P / B BRM975160F /140R * BRM975160R BRM975160R BRM975160R No adapter needed No adapter needed SMMAR180S / S SMMAR203S / S BRM975P * BRM975P BRM975P BRM975P SMMAF160P / S SMMAR160P / S SMMAR180P / S SMMAR203P / S *: When using 140 mm rotor, braking power is less than 160 mm. Please confirm the power is enough for your purpose. **: Latest MARZOCCHI 20 mm thru axle forks are using postmount type disc mount. 110