Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com R133 Brass high pressure regulator, suitable for compressed air, gas and liquid FEATURES High pressure regulator for cylinder or manifold; standard version inlet pressure up to 220 bar (3190 psi), higher pressure for special versions. Inlet cylinder connections according to UNI standard, other connections available on request. Outlet pressure up to 15 bar (218 psi) is controlled by a stainless steel diaphragm (AISI 316L); greater outlet pressures are controlled by a piston. The external chrome-plated finish and the stainless steel diaphragm make the R133 series suitable for laboratory and gas analysis applications, as well as for normal industrial applications. Available the EAC-EX TP TC 012/2011 versions for the Russian market. The product complies with the directive 2014/68/EU (PED).
SPECIFICATIONS Inlet and outlet pressure gauges: accuracy class 1.6, G 1/4 ports Diaphragm version regulator weight: ~2,4 kg (~5.29 lb) Piston version regulator weight: ~2,9 kg (~6.39 lb) Standard version operating temperature -20 C +60 C (-4 F 140 F) Main valve leakage classification: VI (bubble tight) Flow coefficient: Kv= 0.08 Nm3/h (Cv = 0.09 US gal/min) Degree of protection: IP25 MATERIALS Body and bonnet: brass, chrome-plated outside Internal parts: OT58 brass Main valve spring: stainless steel AISI 302 Adjusting spring: C85 (not in contact with the fluid) Diaphragm (for outlet pressure up to 15 bar): - standard: stainless steel AISI 316 - for liquid and air relieving: two coupled diaphragms NBR+PTFE, PTFE in contact with the fluid Piston (for greater outlet pressure): brass O-ring: EPDM or FPM according to the fluid (other compounds available on request) Main valve gasket: PA 6.6 (EPDM for maximum operating pressure Ps 15 bar) ACCESSORIES Panel mounting ring-nut Wall mounting bracket and ring-nut Not standard inlet and outlet connections G 1/4 connections to pipe bonnet and overpressure valve, in case of use of dangerous fluid Overpressure relieving function (for compressed only) SPARE PARTS Gauges Overpressure valve Complete kit: filter, complete main valve, o-rings, assembled diaphragm Copyright ID Insert Deal S.r.l. - All rights reserved 2
flow charts 25 R133 Pin=170 bar Pout 3 30 bar Azoto/Nitrogen Outlet pressure [bar] 20 15 10 5 0 0 20 40 60 80 100 120 140 160 Flow rate [Nm^3/h] Outlet pressure [bar] 14 12 10 8 6 4 2 0 R133 Pin=170 bar Pout 1,5 15 bar Azoto/Nitrogen 0 20 40 60 80 100 120 Flow rate [Nm^3/h] 10 R133 Pin=10 bar Pout 1,5 15 bar Aria/Air Outlet pressure [bar] 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 Flow rate [Nm^3/h] Copyright ID Insert Deal S.r.l. - All rights reserved 3
generating the product code REGOLATORE R133 in Ottone AA BB CC DD E FF AA Attacchi / Connections 00 Vedi tipo di fluido, tabella DD BB Pressione d'ingresso / Inlet pressure B0 PS 15 bar L J0 PS 220 bar H L0 PS 80 bar M CC Intervallo d'uscita/ Outlet range A0 Pout 0,2-1,5 bar D0 Pout 0,8-8 bar E0 Pout 1,5-15 bar F0 Pout 3-30 bar G0 Pout 5-50 bar V0 Pout 20-200 bar X0 Pout 10-100 bar DD Tipologia di fluido / Fluid type 15 O2 PED Classe III 98 EPDM 99 FPM U1 1H - UNI 11144 PED CLASSE III U2 2 -UNI 11144 U5 5 -UNI 11144 U6 6 -UNI 11144 U7 7S -UNI 11144 - C2H2 U8 8 -UNI 11144 U9 9 -UNI 11144 E Marchiato / Marked I ID FF Accessori/Accessories 00 Nessun accessorio CODE COMPOSITION EXAMPLE 133# 00 J0 E0 U1 I 00 133#:R133 brass regulator 00: Connection according to the fluid see table DD J0: Inlet pressure 220 bar (3191 psi) E0: Outlet pressure 1,5-15 bar (21,8 218 psi) U1: Inlet connection 1H-UNI 1114 I: Insert Deal 00: No accessories Copyright ID Insert Deal S.r.l. - All rights reserved 4
technical drawings (all dimensions in mm) TYPE ~H Diaphragm 138 Piston 156 34 G 1/4 H n30 n69 ~170 ~85 FLOW Connection L - 117 MAX Bracket and ring-nut to be ordered separately ~170 ~85 Ring-Nut M35x1,5 25 n69 FLOW G 1/4 76 L n8 BRACKET TYPE ~L Diaphragm 62 Piston 44 L - 117 MAX 26 = = ~165 Copyright ID Insert Deal S.r.l. - All rights reserved 5
ID Insert Deal Srl Strada dei Boschi, 40 20852 Villasanta (MB) Italia tel. +39 039 302035 info@idinsertdeal.com www.idinsertdeal.com ID Insert Deal si riserva il diritto di cambiare le specifiche del prodotto senza preavviso. ID Insert Deal reserves the right to change and/or modify product specifications without prior notice. Riproduzione vietata. Tutti i diritti riservati; nessuna parte del presente documento può essere riprodotta senza autorizzazione di ID Insert Deal Srl. Reproduction forbidden. All rights reserved; the hereby document can t be reproduced, also partially, without the authorization of ID Insert Deal Srl. PRESSURE REGULATOR_R133_EN_04 Azienda con sistema di gestione qualità certificato. certificato N 50 100 9191 Company with certificated quality management system. certificate N 50 100 9191 Copyright ID Insert Deal S.r.l. - All rights reserved 6