Twin layered composite organic needlefelt with a dark green Panox/Aramid working surface and a light green integral lining of FR Rayon.

Cleaning Storage / Lifetime Standard / Tests Specification Aluminised Neck Cap Technical Data Sheet S36 Aluminised Neck Cape Can be fitted to Centurion Safety Helmets to provide additional neck protection - especially suitable in high temperature environments. Twin layered composite organic needlefelt with a dark green Panox/Aramid working surface and a light green integral lining of FR Rayon. Aluminised on one side with a highly reflective film. Negative reaction to flame in EN 532, 1994 flammability test (test method: 10 second flame applied to face of vertical fabric sample). Thickness of material 3.50mm Weight 650g/m2 Flammability EN 532, 1994 Thermal tests (EN 407:1994) Performance level Contact heat EN 702 2 Convective heat EN 367 3 Radiant heat EN 366 4 Molten Metal Splash Small splashes EN 348 4 Large quantities EN 373 4 Abrasion resistance EN 388 1 Tear resistance EN 388 4 Storage: - Can be stored and transported in their original cartons - May be stored in the dark for up to 5 years - Do not store in direct/high heat or sunlight Lifetime: - Excessive wear and tear can considerably reduce the lifespan of the product - Wipe clean only - do NOT launder - Do not use solvents or abrasives 09/13 UK Centurion Safety s Ltd, Howlett Way, Thetford, Norfolk, IP24 1HZ, England. Tel: +44 (0) 1842 754266 Fax: + 44 (0) 1842 765590, www.centurionsafety.co.uk, email- sales@centurionsafety.co.uk

TECHNICAL DATA SHEET HELMET ACCESSORIES DESCRIPTION A range of helmet accessories are available including sweatbands, chinstraps, cradle/headband assemblies and neck capes. SWEATBANDS Description Colour Material Fitted in For use with Dry-Tech Sweatband Grey Polyester Brushed Nylon Sweatband Black Nylon PVC Sweatband White PVC - Vabon Sweatband Yellow Vabon - Spectrum, Vision Plus Nexus and Concept Vulcan, Reflex, 1125 and 1100 S31D S31N S31P S31W CRADLE/HEADBANDS Terylene Cradle with Premium Wheel Ratchet and Dry-Tech Sweatband Terylene Cradle with Slip Ratchet and Dry-Tech Sweatband Terylene Cradle with Premium Wheel Ratchet and Brushed Nylon Sweatband Terylene Cradle with Slip Ratchet and Brushed Nylon Sweatband For use with except Vulcan S33/35 except Vulcan S33/34 Vulcan helmet S33/11 Vulcan helmet S33/7 CHINSTRAPS Description Colour Material Number of attachment points Standard For use with Nexus Heightmaster Chinstrap Blue Polyester 4 EN 12492 Nexus Heightmaster S30NY SecurePlus Chinstrap Black Polyester 4 EN 397 S30LY SecurePlus Chinstrap Black Nylon 4 EN 397 S30Y SecurePlus Chinstrap Adjustable Elasticated Chinstrap Black White (Grey/Black strips) Elasticated Polyester Elasticated Polyester/Nylon/ Spandex Mix 4 EN 397 2 EN 397 Non Adjustable Chinstrap White Cotton 2 EN 397 Leather Chinstrap Black Leather 2 EN 397 Vulcan S30V S30YE S30E S30C Customer Service Hotline +44 (0)1842 855045 sales@centurionsafety.co.uk www.centurionsafety.eu 01-18 UK

NECK CAPE Colour Material For use with Weight Foul Weather Neck Cape Yellow Nylon except Reflex and Vulcan Width (widest point) Depth (centre point) 49g 570mm 245mm S35 MAINTENANCE Storage Lifetime Cleaning Disposal Can be stored and transported in their original cartons at ambient temperature (0 C to 30 C). May be stored in the dark for up to 5 years. Do not store in direct/high heat or sunlight as this may effect the product. Excessive wear and tear can considerably reduct the lifespan of the product. Clean using warm soapy water and soft cloth, do not use solvents or abrasives. Recycling is preferred when possible. Customer Service Hotline +44 (0)1842 855045 sales@centurionsafety.co.uk www.centurionsafety.eu 01-18 UK

Cleaning Storage / Lifetime Inside of Neck Cradle/Headbands Sweatbands/Chinstraps/ Helmet Accessories Capes Reflective Strips Technical Data Sheet Helmet Accessories Sweatbands Chinstraps Reflective strips Cradle/Headband Assemblies Neck Capes Sweatbands: : Dry-Tech S31D Brushed Nylon with 2mm foam S31N PVC S31P Vabon S31W Chinstraps*: (for all except Vulcan) 2 Point Nylon Adjustable Chinstrap S30C Elasticated 2 point Chinstrap with chincup S30E Leather Chinstrap (for Vulcan helmet) S30V 4 point Linesman Polyester webbing harness with LDPE clips (for fitting to Concept or Spectrum helmet) S30Y 4 point Linesman Polyester Elasticated webbing harness (for fitting to Concept or Spectrum helmet) S30YE Reflective Strips: 3M Reflective Scotchlite strips (2 of 19mm x 220mm) S30RS High Intensity Reflective Strips# S30HIRS #See seperate datasheet for further info *Chinstrap test designed to release between a force of 150-250 Newtons Cradle/Headband Assemblies: Helmet: : Terylene Cradle with Brushed Nylon Sweatband Large 1125 Large size S33/3 Terylene Cradle with Brushed Nylon Sweatband Small 1125 Small size S33/4 Terylene Cradle with Dry-Tech Sweatband Helmets S33/34 Terylene Cradle, Premium Ratchet, Dry-Tech Sweatband Helmets S33/35 Terylene Cradle, Premium Ratchet, Vabon Sweatband Concept Roofer S33/10 Terylene Cradle with Brushed Nylon Sweatband Vulcan S33/7 LDPE Cradle (no sweatband) 1100 S33/1 Terylene Cradle, Premium Twist 2 Fit Ratchet, Brushed Nylon Sweatband 1125 and Concept S33/13 Neck Capes: Helmet: : Foul Weather Neck Cape (PVC Coated Woven Nylon) All (except Vulcan & Reflex) S35 Aluminised Neck Cape (See separate data sheet for more info) All (except Reflex) S36 Storage: - Can be stored and transported in their original cartons at ambient temperature (0ºC to + 30ºC) - May be stored in the dark for up to 5 years - Do not store in direct/high heat or sunlight as this may distort the shell Lifetime: - The Centurion helmet has an in-use life of up to 5 years - Excessive wear and tear can considerably reduce the lifespan of the product - Clean using warm soapy water and soft cloth - Do not use solvents or abrasives Centurion Safety s Ltd, Howlett Way, Thetford, Norfolk, IP24 1HZ, England. Tel: +44 (0) 1842 754266 Fax: + 44 (0) 1842 765590, www.centurionsafety.co.uk, email- sales@centurionsafety.co.uk 07/16 UK

TECHNICAL DATA SHEET RETRACTABLE EYESHIELDS DESCRIPTION S589 and S589SE Stylish fast fitting replaceable moulded eye shields with anti scratch/anti fog coating and easy to use pull down tabs. S579 Functional replaceable general purpose eye shield. S589 SPECIFICATION s and Options Colour For use with S589 Clear Concept and Nexus S589SE Smoke Grey Concept and Nexus S589 S579 Clear 1100 Classic,1125 Classic and Reflex S589SE MATERIALS s and Specification S589 S589SE S579 Material Polycarbonate Polycarbonate Polycarbonate S579 EUROPEAN AND INTERNATIONAL STANDARDS WITH OPTIONS EN 166:2001: Personal Eye Protection EN 169: 2002 EN 170: 2002 EN 171: 2002 EN 172: 1995 GS-ET-29 Rev 1 Supplementary requirements for the testing and certification of face shields for electrical works ANSI/ISEA Z87.1 2015 American National Standard for Occupational and Educational Personal Eye and Face Protection Devices F - Low Energy Impact B - Medium Energy Impact A - High Energy Impact 1 - Optical Class 3 - Liquid droplets 9 - Molten Metal Splash T - High Speed Particles at extremes of temperature 8 - Electric Arc Scale Number 3 Scale Number 5 2C-1,2 2-1,2 4-5 5-2,5 5-3,1 Class 1 4 ka (3.2 cal/cm 2 ) Class 2 7 ka (10.1 cal/cm 2 ) Z87.1 S589 P P P P S589SE P P P P S579 P P Customer Service Hotline +44 (0)1842 855045 sales@centurionsafety.co.uk www.centurionsafety.eu 04-18 UK

NEXUS ANTI STATIC SYSTEM The Retractable Eyeshield in conjunction with the Nexus safety helmet can be used in explosive atmospheres as it provides anti static protection according to IEC 60079-32-2:2015 Electrostatics hazards tests. Nexus Core, Nexus SecurePlus and Nexus Heightmaster with S589 Retractable Eyeshield Clear and/or S589SE Retractable Eyeshield Smoke Grey and/ or S30*NHIRS High Intensity Reflective Stickers Gas Zone 0 Gas Zone 1 Gas Zone 2 Dust Zone 20 Dust Zone 21 Dust Zone 22 IIA IIB IIC IIA IIB IIC IIIA IIIB IIIC IIIA IIIB IIIC IIIA IIIB IIIC IIIA IIIB IIIC P P P P P P P P P P P P P P P P P PACKAGING AND MAINTENANCE Packaging Storage Lifetime Cleaning Disposal S589 and S589SE: 10 per product, box size 21.5 x 16 x 10cm, weight 350gm S579: 10 per product, packaging size 23 x 21 x 10cm, weight 400gm Can be stored and transported in original packaging at ambient temperature (0 ⁰ C to + 30 ⁰ C). They may be stored in the dark for up to 5 years. Storage in direct sunlight, extremes of temperature and in a fashion that is liable to distort is not recommended. These products have been designed to have an in-use life of up to 5 years. It is recommended that after 5 years the product is destroyed. Excessive wear and tear can considerably reduce the lifespan of the product. Clean using warm soapy water and soft cloth. Care must be taken to avoid scratching. Recycling is preferred when possible. Look out for the recycling symbol for material category. Customer Service Hotline +44 (0)1842 855045 sales@centurionsafety.co.uk www.centurionsafety.eu 04-18 UK

TM Technical Data Sheet Maintenance Shelf Life Standard Materials Specification Reflective Stickers / Cleaning High Intensity Reflective Stickers (S30HIRS) Designed specifically for applying to Centurion Reflex, Reflex Plus, Concept, Vision, Vision Plus and Spectrum safety for improving wearer visibility and safety. Material approved to EN 12899-1 Ra2. Sticker set provides coverage on the front, sides, rear and top of the helmet. Colours: White Reflective Pack Quantity: 5 sets of High Intensity Reflective Stickers : S30HIRS Helmet Compatibility: Suitable for use on our HDPE and ABS industrial safety Chemical Resistance: Resists mild acids, mild alkalis and salts. Excellent water resistance. Resists occasional fuel spills. Operation Temperature Range: 20-28ºC Working Temperature Range: -20-63ºC Thickness (film plus adhesive): 0.405mm Tensile Strength: 44N/25mm at 23ºC Retroreflection: Surface Film: Release Paper: Adhesive: Standard: The shelf life of the film is 1 year * We have tested the material s adhesive in our laboratory to confirm that it causes no detrimental reaction to the helmet shell material. At a -4º entrance angle and a 0.2º observation angle the typical co-efficiency of retroreflection is 250. (The entrance angle is formed by a light beam striking the surface at a point and at a line that is perpendicular to the surface at the same point. An observation angle is formed by the light beam striking the reflective surface and returning to the observer). PMMA Silicon film Acrylic adhesive Ensure helmet is clean and dry prior to applying the reflective materials Use water only to clean EN 12899-1 Ra2 (Reflectivity) and Material specification Material meets specification requirements of EN 12899-Ra2 Front - Reflex & Reflex Plus * Front - Concept, Vision & Spectrum * Back (Shown on Concept)* Top (Shown on Concept)* * for Guide to applying Centurion High Intensity Reflective Stickers, refer to information on packaging Centurion Safety s Ltd, Howlett Way, Thetford, Norfolk, IP24 1HZ, England. Tel: +44 (0) 1842 754266 Fax: + 44 (0) 1842 765590, www.centurionsafety.co.uk, email- sales@centurionsafety.co.uk 12/12