MIDGETBOX Made in Italy product Patented stall protection pneumatic circuit Works with non-lubricated air Self priming Possibility of adjusting the pumping speed Versatility of use Wild range of materials compatible with the pumped fl uid Runs dry without damage Particularly suitable for heavy duty applications High performance High power and sturdiness Available with NPT connections (on request) Suitable for pumping high viscosity fl uids Can be set up in tight spaces Atex zone 1 (on request) - Atex zone 2 standard Can be ceiling-mounted Midgetbox - the smallest pneumatic pump for chemical industry on the market Continuos operation: YES Warranty: 1 year - according to our general conditions of sale Spare parts: to identify the spare parts check the illustrations at the end of the operation and maintenance manual Intake/delivery connections G 1/4 f (*) - fl ow rate 5 l/min Construction materials PP - PP+CF (*) NPT connections on request 1/4
MIDGETBOX Q (U.S. g.p.m.) 0 0,2 0,3 0,5 0,6 0,7 0,9 1,0 1,1 1,3 1,4 1,5 80 8 262,4 70 229,6 7 34 196,8 6 50 5 164,0 40 4 131,2 30 3 98,4 20 2 65,6 Head (m) 10 0 0 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 6 32,8 0 H (ft) Air supply pressure (bar) Air consumption (NI/min) Flow rate (litres/min) * The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20 C, and vary according to the construction material. ** Attention: average values refer to the various configurations of materials for balls, ball seats and diaphragms. Guaranteed head/flow rate according to ISO 9906 Intake/delivery connections G 1/4 f (*) Air connection Max. flow rate* Max. air supply pressure Max. head* Max. self-priming capacity** G 1/8 f 5 l/min 8 bar 80 m 3 m Max. stored neg. suction 9,5 Max. diameter of passing solids Noise** Displacement per cycle Max. viscosity 0 mm db 3,2 cc 800 cps (*) NPT connections on request Construction materials and net weight PP 0,5 Kg Temp. 3 C min. 65 C max. PP+CF 0,5 Kg Temp. 3 C min. 65 C max. 2/4
MIDGETBOX AVAILABLE MATERIALS PP PP+CF INSTALLATIONS SELF PRIMING POSITIVE SUCTION HEAD DRUM TRANSFER MID PP/PP+CF 1/8 G AIR CONNECTION 1/4 1/4" G GDELIVERY MID PP/PP+CF 25 (Dimensions in mm) 16 121 44 1/4 G INTAKE 75 Packaging: cardboard box - 18.5 x 13 x 18 cm - weight: 0.2 Kg (the weight only refers to the packaging without the pump inside). 3/4
MIDGETBOX CUBIC COMPOSITION CODE ex. IMID-P-NTGRT-- Internal Exchanger, MIDGETBOX, body PP, air side diaphragm NBR, fluid side diaphragm PTFE, balls Pyrex, ball seats PPS-V, O-Ring PTFE. I MID P - N T G R T - - INTERNAL EXCHANGER PUMP MODEL PUMP BODY AIR SIDE DIAPHRAGM FLUID SIDE DIAPHRAGM BALLS BALL SEATS O-RING TWIN MANIFOLD CONDUCT VERSION I MID - Midgetbox (available only PP/PP+CF) P - Polypropylene PC - PP+CF N - NBR T - PTFE G - Pyrex A - AISI 316 R - PPS-V K - PEEK T - PTFE X C APPLICATIONS 4/4
CUBIC 15 Made in Italy product Patented stall protection pneumatic circuit Works with non-lubricated air Self priming Possibility of adjusting the pumping speed Versatility of use Wild range of materials compatible with the pumped fl uid Runs dry without damage Particularly suitable for heavy duty applications High performance High power and sturdiness Available with NPT connections (on request) Suitable for pumping high viscosity fl uids Can be set up in tight spaces Atex zona 1 (on request) - Atex zona 2 standard Can be ceiling-mounted Continuos operation: YES Warranty: 1 year - according to our general conditions of sale Spare parts: to identify the spare parts check the illustrations at the end of the operation and maintenance manual Intake/delivery connections G 3/8 f (*) - fl ow rate 17 l/min Construction materials PP - PP+CF - ECTFE (*) NPT connections on request 1/4
CUBIC 15 0 0,5 1,0 1,5 2,1 80 Q (U.S. g.p.m.) 2,6 3,1 3,6 4,2 4,7 5,2 262,4 70 8 50 50 229,6 7 6 70 196,8 50 5 164,0 40 30 4 3,5 100 1 131,2 98,4 Head (m) 20 3 2 10 0 0 2 4 6 8 10 12 14 16 18 20 Air supply pressure (bar) Air consumption (NI/min) Flow rate (litres/min) 65,6 32,8 0 H (ft) H * The curves and performance values refer to pumps with submerged suction and a free delivery outlet with water at 20 C, and vary according to the construction material. ** Attention: average values refer to the various configurations of materials for balls, ball seats and diaphragms. Guaranteed head/flow rate according to ISO 9906 Intake/delivery connections Air connection Max. flow rate* Max. air supply pressure Max. head* Max. self-priming capacity** G 3/8 f G 3/8 f 17 l/min 8 bar 80 m 3 m Max. stored neg. suction 9,5 Max. diameter of passing solids Noise** Displacement per cycle Max. viscosity 0,5 mm 65 db 10,3 cc 15.000 cps (*) NPT connections on request Construction materials and net weight PP 1 Kg Temp. 3 C min. 65 C max. PP+CF 1 Kg Temp. 3 C min. 65 C max. ECTFE 1,5 Kg Temp. 3 C min. 95 C max. 2/4
CUBIC 15 AVAILABLE MATERIALS PP PP+CF ECTFE INSTALLATIONS SELF PRIMING TWIN SUCTION AND DELIVERY MANIFOLD TWIN SUCTION MANIFOLD POSITIVE SUCTION HEAD DRUM TRANSFER CU15 PP/PP+CF/ECTFE 78,5 3/8 G DELIVERY CU15 PP/PP+CF/ECTFE 194 105 78,5 (Dimensions in mm) 49 105 3/8 G INTAKE 3/8 G AIR CONNECTION 140 7 Packaging: cardboard box - 18.5 x 13 x 18 cm - weight: 0.2 Kg (the weight only refers to the packaging without the pump inside). 3/4
CUBIC 15 STANDARD: II 3/3 GD c IIB T135 C (zone (zona 2) CONDUCT: II 2/2 GD c IIB T135 C (zone (zona 1) CUBIC COMPOSITION CODE ex. ICU15P-NTTPV Internal exchanger, CUBIC 15, body PP, air side diaphragm NBR, fluid side diaphragm PTFE, balls PTFE, ball seats PP, O-Ring Viton. I CU15 P N T T P V - - INTERNAL EXCHANGER PUMP MODEL PUMP BODY I CU15 - Cubic 15 P - Polypropylene PC - PP+CF EC - ECTFE AIR SIDE DIAPHRAGM FLUID SIDE DIAPHRAGM N - NBR T - PTFE T - PTFE A - AISI 316 BALLS BALL SEATS O-RING TWIN MANIFOLD P - Polypropylene A - AISI 316 E - ECTFE I - Polizene T - PTFE* V - Viton E - EPDM N - NBR X C CONDUCT VERSION * Only with AISI 316 ball seats APPLICATIONS 4/4