HENKEL LOCTITE CORPORATION 02/02/03 ROCKY HILL, CONNECTICUT EMERGENCY PHONE: (860) MATERIAL SAFETY DATA SHEET Page 01 of 05

Similar documents
HENKEL LOCTITE CORPORATION 1001 TROUT BROOK CROSSING 01/07/03 ROCKY HILL, CONNECTICUT EMERGENCY PHONE: (860)

LOCTITE CORPORATION 10/28/01 ROCKY HILL, CONNECTICUT EMERGENCY PHONE: (860) MATERIAL SAFETY DATA SHEET Page 01 of 05

HENKEL LOCTITE CORPORATION 12/08/02 ROCKY HILL, CONNECTICUT EMERGENCY PHONE: (860) MATERIAL SAFETY DATA SHEET Page 01 of 06

LOCTITE CORPORATION 07/07/02 ROCKY HILL, CONNECTICUT EMERGENCY PHONE: (860) MATERIAL SAFETY DATA SHEET Page 01 of 05

MATERIAL SAFETY DATA SHEET

Product Name: Duro(R) Super Glue in the Gluematic(TM) Pen Page 1 of 6

Material Safety Data Sheet

Material Safety Data Sheet. 2. COMPOSITION/INFORMATION ON INGREDIENTS Ingredient Weight Percent ACGIH TLV: OSHA PEL: METHYL METHACRYLATE

Material Safety Data Sheet

Material Safety Data Sheet

LOCTITE CORPORATION 10/28/01 ROCKY HILL, CONNECTICUT EMERGENCY PHONE: (860) MATERIAL SAFETY DATA SHEET Page 01 of 07

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET General Finishes Corporation. SECTION 2: Composition/Information on Ingredients

Material Safety Data Sheet

Disposal: Place empty container in trash. Give partial or full container to safety officer.

Material Safety Data Sheet

SAFETY DATA SHEET Lead Stop

MATERIAL SAFETY DATA SHEET. Elecro Static Dissapative WATER EMULSION FINISH PART A

MATERIAL SAFETY DATA SHEET Artisan Intensive Stone Cleaner SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFTEY DATA SHEET

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet Product No Cresyl Violet Acetate, Certified. Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET. INGREDIENTS AND EXPOSURE LIMITS Ingredients: CAS Number: PEL: TLV: STEL: Epoxy resin NJTSRN: NE NE NE

7031 SW 22 Court, Davie, FL (866) 637-ROOF (7663) Fax: (941) Final Flat Roof MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Artisan Penetrating Stone Sealer & Oil Repellent SECTION 1 PRODUCT NAME AND COMPANY IDENTIFICATION

Material Safety Data Sheet

Safety Data Sheet. Product No Eponate 12 Resin Issue Date ( ) Review Date ( )

MATERIAL SAFETY DATA SHEET PAGE 1

Kardol Quality Products 285 S. West Street Lebanon, Ohio Fax:

SAFETY DATA SHEET (SDS)

MATERIAL SAFETY DATA SHEET Date Revised: 7/18/2013 Page: 1 Mold Release MSDS Number: SECTION 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

M A T E R I A L S A F E T Y D A T A S H E E T

Page1. Company Information. LashBox Los Angeles. 727 W7th, Los Angeles, California MATERIAL SAFETY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK OM125, Part A BILLERICA, MA 01821

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

OSHA regulated. NE NE No No No. NE NE No No No

MATERIAL SAFETY DATA SHEET

T2G. Atomic Top Coat SAFETY DATA SHEET. DATE OF PREPARATION July 12, 2014 SECTION 1- PRODUCT AND COMPANY INFORMATION PRODUCT NUMBER PRODUCT NAME

Health Flammability 2 Reactivity 0 PRODUCT NAME FORMBY S* Build-Up Remover

MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

SECURITY COAT. Section 1 : PRODUCT AND COMPANY IDENTIFICATION. Section 2 : INGREDIENT INFORMATION

Material Safety Data Sheet

Material Safety Data Sheet

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

TECH TIRE AND TUBE COMPOUND (INCL. LITE)

Material Safety Data Sheet

AST PENETRANT II SAFETY DATA SHEET Section 1- Product and Company Identification

SAFETY DATA SHEET SECTION 1 IDENTIFICATION. MB4908 Product Line

FIRST AID - SKIN CONTACT: IF ON SKIN: Gently wash with plenty of Soap and Water. If skin irritation occurs: Get medical advice/ attention.

MATERIAL SAFETY DATA SHEET

SAFETY DATA SHEET. Page 1 of 5 1. PRODUCT AND COMPANY IDENTIFICATION

SAFETY DATA SHEET (SDS)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

T.J. RONAN PAINT CORP. SAFETY DATA SHEET FOR PROFESSIONAL GRAPHIC ARTS COATINGS SECTION I - PRODUCT IDENTIFICATION

Material Safety Data Sheet

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H74 UNF, Part A BILLERICA, MA 01821

BUDGET MOLDERS SUPPLY, INC CORPORATE PARK DRIVE MACEDONIA, OHIO MATERIAL SAFETY DATA SHEET MSDS NO.: DATE: May 22, 2007

Safety Data Sheet 1432BR

Item #: RS4601-B. Restrictions on Use: Any use other than specified. In Case of Emergency: Chemtrec US

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Material Safety Data Sheet. Product Name: Synlube 531 Bulk. Chemical Type: EHS. Non-Hazardous Release Blend 4-8

MATERIAL SAFTEY DATA SHEET

14 FORTUNE DRIVE PRODUCT NAME: EPO-TEK H20E, Part A BILLERICA, MA 01821

Material Safety Data Sheet

Carcinogen: NTP (No) IARC (No) OSHA (No) DATE REVISED: 09/23/2002 REV: B * HMIS CODE ratings are estimated by Epoxy Technology.

Safety Data Sheet 1533BR

EMERGENCY PHONE : DATE PRINTED : 9/28/2009 INFORMATION PHONE : NAME OF PREPARER : AARON NUTTER

MATERIAL SAFETY DATA SHEET Complies with OSHA Hazard Communication Standard 29 CFR

*********************** EMERGENCY PHONE #: ************************

BOSS LUBRICANTS: MATERIAL SAFETY DATA SHEET

Cyberbond SMA Activator Aerosol

Material Safety Data Sheet Product No M-Bond 610 Curing Agent, Kit Component: Issue Date ( ) Review Date ( )

SAFETY DATA SHEET B-415 VER 15-1 DATE: 3/31/15 24 HOUR TELEPHONE NUMBER (CHEMTREC)

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET

ISSUED 04/22/02 MATERIAL SAFETY DATA SHEET

=========================================================================== Section 1 PRODUCT AND COMPANY IDENTIFICATION

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET "W" TEST SOLUTION NFPA HAZARD RATINGS* 2 Moderate health hazard 3 Highly flammable SECTION 1: PRODUCT INFORMATION

Safety Data Sheet 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION. Product Identification Product Name: Everkote 300

Material Safety Data Sheet Product No PELCO CryO-Z-T Issue Date ( ) Review Date ( )

MSDS for Maintenance Solutions FLASH FLOOR Concrete Restoration Product (part A).

Material Safety Data Sheet

MATERIAL SAFETY DATA SHEET

Carolina Narrow Fabric Company

Transcription:

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATERIAL SAFETY DATA SHEET Page 01 of 05 Part of Kit: 94142 Product Type: Epoxy Resin 2. COMPOSITION, INFORMATION ON INGREDIENTS Ingredients CAS No. % Epoxy resin 25068 38 6 30 60 ETHER 107 98 2 5 10 Benzyl alcohol 100 51 6 1 5 Ingredients which have exposure limits Exposure Limits (TWA) ACGIH OSHA OTHER ETHER 100 ppm TWA 100 ppm TWA 360 mg/m3 Exposure Limits (STEL) ACGIH OSHA ETHER 150 ppm 150 ppm 540 mg/m3 3. HAZARDS IDENTIFICATION Toxicity: Primary Routes of Entry: Signs and Symptoms of Exposure: Existing Conditions Aggravated by Exposure: Eye, skin and respiratory tract irritant. May cause allergic skin reaction and/ or dermatitis with prolonged exposure. Skin and eye contact, inhalation. Skin and eye irritant. May cause headaches, nausea, dizziness and respiratory tract irritation if inhaled. eczema and other skin conditions, allergies. MATERIAL SAFETY DATA SHEET Page 02 of 05 3. HAZARDS IDENTIFICATION (continued) Literature Referenced Carcinogen Ingredients Target Organ and Other Health Effects NTP IARC OSHA Epoxy resin ALG IRR NO NO NO ETHER CNS IRR NO NO NO Benzyl alcohol ALG CNS COR IRR NO NO NO Abbreviations ALG Allergen COR Corrosive CNS Central nervous system IRR Irritant 4. FIRST AID MEASURES Ingestion: Inhalation: Skin Contact: Eye Contact: Do not induce vomiting. If conscious, give large amounts of water to dilute. Get medical attention Move to an area free from risk of further exposure. Give oxygen if breathing is difficult. Get medical attention. Remove contaminated clothing. Wash affected skin thoroughly with soap and water. Flush with large quantities of water for at least 15 minutes. Get medical attention. 5. FIRE FIGHTING MEASURES Flash Point: More than 200 F Method: Tag Closed Cup Recommended Extinguishing Agents: Caron dioxide, foam, dry chemical Special Firefighting 1

Procedures: Hazardous Products formed by Fire or Thermal Decomp Carbon Monoxide, Carbon Dioxide, and oxides of Nitrogen. Unusual Fire or Explosion Hazards: Explosive Limits: (% by volume in air)lower (% by volume in air)upper Closed containers may rupture when exposed to extreme heat, due to build up of pressure. Decomposition and combustion products may be toxic. MATERIAL SAFETY DATA SHEET Page 03 of 05 6. ACCIDENTAL RELEASE MEASURES Steps to be taken in case of spill or leak: Soak up as much as possible with an inert absorbent and store in a closed container until disposal. Flush contaminated area with water; prevent washings from entering waterways. 7. HANDLING AND STORAGE Safe Storage: Store in closed containers in a cool, well ventilated area. Do not exceed teperatures above 110 F. (Contact Loctite Customer Service 1 800 243 4874 for shelf life information) Handling: Avoid contact with skin and eyes. Avoid inhaling or swallowing. 8. EXPOSURE CONTROLS, PERSONAL PROTECTION Eyes: Skin: Ventilation: Respiratory Safety glasses or goggles. Impervious gloves Local exhaust recommended to maintain levels below the TLV. Mechanical exhaust is not recommended as the sole means of controlling employee exposure. 9. PHYSICAL AND CHEMICAL PROPERTIES See Section 2 for Exposure Limits. Appearance: Clear liquid Odor: Mild sweet Boiling Point: 212 F ph: Does not apply Solubility in Water: Specific Gravity 1.0607 Volatile Organic Compound (EPA Method 24) 50 60% volatile by volume Vapor Pressure: 2 mm Hg Vapor Density: Heavier than air Evaporation Rate (Ether = 1) 1.0 (Butyl Acetate = 1) 10. STABILITY AND REACTIVITY Stability: Stable Hazardous Polymerization: Will not occur Incompatibility: Strong oxidizing agents, acids. Conditions to Avoid: MATERIAL SAFETY DATA SHEET Page 04 of 05 10. STABILITY AND REACTIVITY (continued) Hazardous Decomposition Products (non thermal): 11. TOXICOLOGICAL INFORMATION See Section 3. 12. ECOLOGICAL INFORMATION No data available 13. DISPOSAL CONSIDERATIONS 2

Recommended methods of disposal: EPA Hazardous Waste Number Incinerate following EPA and local regulations. 14. TRANSPORTATION INFORMATION DOT (49 CFR 172) Domestic Ground Transport Proper Shipping Name: Hazard Class or Division: Identification Number: Marine Pollutant: IATA Proper Shipping Name: Class or Division: UN or ID Number: Paint 15. REGULATORY INFORMATION CA Proposition 65: No California Proposition 65 chemicals are known to be present. 16. OTHER INFORMATION Estimated NFPA(R) Code: Fire Hazard: 1 Reactivity Hazard: 0 Specific Hazard: Does not apply Estimated HMIS(R) Code: Flammability Hazard: 1 MATERIAL SAFETY DATA SHEET Page 05 of 05 16. OTHER INFORMATION (continued) Reactivity Hazards: 0 Personal Protection: See Section 8. NFPA is a registered trademark of the National Fire Protection Assn. HMIS is a registered trademark of the National Paint and Coatings Assn. Prepared By: Rajal Dhruva Title: Health and Regulatory Affairs Specialist Company: Henkel Loctite Corporation, Rocky Hill CT 06067 (24hr.) Phone: (860) 571 5100 Revision Date: February 13, 2002 Revision: First Issue 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION MATERIAL SAFETY DATA SHEET Page 01 of 05 Part of Kit: 94142 Product Type: Epoxy Hardener 2. COMPOSITION, INFORMATION ON INGREDIENTS Ingredients CAS No. % Polyamide Polymer Proprietary 15 40 ETHER 107 98 2 15 40 TETRAETHYLENEPENTAMINE 112 57 2 1 5 Ingredients which have exposure limits Exposure Limits (TWA) ACGIH OSHA OTHER ETHER 100 ppm TWA 100 ppm TWA 360 mg/m3 Exposure Limits (STEL) ACGIH OSHA 3

ETHER 150 ppm 150 ppm 540 mg/m3 3. HAZARDS IDENTIFICATION Toxicity: Primary Routes of Entry: Signs and Symptoms of Exposure: Existing Conditions Aggravated by Exposure: May cause sever eye and skin irritation. May cause allergic skin reaction and/or dermatitis with prolonged exposure. May cause respiratory tract irritation. Skin and eye contact, inhalation. Skin and eye irritation. May cause nose and throat irritation, headaches, dizziness and nausea if inhaled. eczema and other skin conditions, allergies. MATERIAL SAFETY DATA SHEET Page 02 of 05 3. HAZARDS IDENTIFICATION (continued) Literature Referenced Carcinogen Ingredients Target Organ and Other Health Effects NTP IARC OSHA Polyamide Polymer No Data NO NO NO ETHER CNS IRR NO NO NO TETRAETHYLENEPENTAMINE ALG IRR MUT NO NO NO Abbreviations ALG Allergen IRR Irritant CNS Central nervous system MUT Mutagen 4. FIRST AID MEASURES Ingestion: Inhalation: Skin Contact: Eye Contact: Do not induce vomiting. Drink 1 2 glasses of water. Get medical attention. Move to an area free from risk of further exposure. Give oxygen if breathing is difficult. Get medical attention. Remove contaminated clothing. Wash affected skin thoroughly with soap and water. Flush with large quantities of water for at least 15 minutes. Get medical attention. 5. FIRE FIGHTING MEASURES Flash Point: More than 200 F Method: Tag Closed Cup Recommended Extinguishing Agents: Carbon dioxide, foam, dry chemical. Special Firefighting Procedures: Hazardous Products formed by Fire or Thermal Decomp Carbon Monoxide, Carbon Dioxide, and Oxides of Nitrogen. Unusual Fire or Explosion Hazards: Explosive Limits: (% by volume in air)lower (% by volume in air)upper Closed containers may rupture when exposed to extreme heat. Decomposition and combustion products may be toxic. MATERIAL SAFETY DATA SHEET Page 03 of 05 6. ACCIDENTAL RELEASE MEASURES Steps to be taken in case of spill or leak: Remove all sources of ignition. Soak up as much as possible with an inert absorbent and store in a closed container until disposal. Flush contaminated area with water, prevent washings from entering the waterways. 7. HANDLING AND STORAGE Safe Storage: Store below 110 F. (Contact Loctite Customer Service 1 800 243 4874 for shelf life information) 4

Handling: Avoid contact with skin and eyes. Avoid inhaling or swallowing. 8. EXPOSURE CONTROLS, PERSONAL PROTECTION Eyes: Skin: Ventilation: Respiratory Safety glasses or goggles. Impervious gloves Explosion proof mechanical ventilation and local exhaust should be used to maintain levels below the TLV. Mechanical exhaust is not recommended as the sole means of controlling employee exposure. NIOSH approved respirtor with organic vapor cartridge if required. 9. PHYSICAL AND CHEMICAL PROPERTIES See Section 2 for Exposure Limits. Appearance: Clear liquid Odor: Mild sweet Boiling Point: 275 F ph: Does not apply Solubility in Water: Specific Gravity 1.08 Volatile Organic Compound (EPA Method 24) 75 100 % volatile by volume Vapor Pressure: 3.8 mm Hg Vapor Density: Heavier than air Evaporation Rate (Ether = 1) 1.0 (Butyl Acetate = 1) 10. STABILITY AND REACTIVITY Stability: Stable Hazardous Polymerization: Will not occur Incompatibility: Strong oxidizing agents, acids Conditions to Avoid: MATERIAL SAFETY DATA SHEET Page 04 of 05 10. STABILITY AND REACTIVITY (continued) Hazardous Decomposition Products (non thermal): 11. TOXICOLOGICAL INFORMATION See Section 3. 12. ECOLOGICAL INFORMATION No data available 13. DISPOSAL CONSIDERATIONS Recommended methods of disposal: EPA Hazardous Waste Number Incinerate following EPA and local regulations. 14. TRANSPORTATION INFORMATION DOT (49 CFR 172) Domestic Ground Transport Proper Shipping Name: Hazard Class or Division: Identification Number: Marine Pollutant: IATA Proper Shipping Name: Class or Division: UN or ID Number: 15. REGULATORY INFORMATION CA Proposition 65: No California Proposition 65 chemicals are known to be present. 16. OTHER INFORMATION Estimated NFPA(R) Code: Fire Hazard: 1 Reactivity Hazard: 0 Specific Hazard: Does not apply Estimated HMIS(R) Code: 5

Flammability Hazard: 1 MATERIAL SAFETY DATA SHEET Page 05 of 05 16. OTHER INFORMATION (continued) Reactivity Hazards: 0 Personal Protection: See Section 8. NFPA is a registered trademark of the National Fire Protection Assn. HMIS is a registered trademark of the National Paint and Coatings Assn. Prepared By: Rajal Dhruva Title: Health and Regulatory Affairs Specialist Company: Henkel Loctite Corporation, Rocky Hill CT 06067 (24hr.) Phone: (860) 571 5100 Revision Date: February 13, 2002 Revision: First Issue application assistance. browse catalog. troubleshooting. equipment datasheets. distributor locator.what's new. career opportunities about loctite. contact loctite. literature. loctite world wide. search. home copyright 1997 2000 Loctite 6