EN Manual Kingpad mc-32 Edition Bus system control pad for installation in the Graupner mc-32 transmitter No. 3974.32 Copyright Graupner/SJ GmbH
2 / 16
Index Introduction... 5 Service Centre... 5 Intended use... 6 Package content... 6 Required accessories... 6 Technical data... 7 Characteristics... 7 Symbols explication... 8 Safety notes... 8 For your safety by handling the transmitter...9 Declaration of conformity... 10 Product description...10 Notes on environmental protection... 11 Care and maintenance... 11 Warranty... 11 Installation / Connection... 12 Setting the Kingpad... 14 Operation... 15 Functions 2nd level...15 3 / 16
4 / 16
Introduction Thank you very much for purchasing the Graupner Kingpad mc-32 Edition. This is extremely versatile. This manual is valid for all the modules listed on the cover sheet. Read this manual carefully to achieve the best results with your Kingpad mc-32 Edition and first of all to safely control your models. If you experience any trouble during operation, take the instructions to help or ask your dealer or Graupner Service Centre. Due to technical changes, the information may be changed in this manual without prior notice. Be always updated by checking periodically on our website, www.graupner.de to be always uptodate with the products and firmwares. This product complies with national and European legal requirements. To maintain this condition and to ensure safe operation, you must read and follow this user manual and the safety notes before using the product! Note This manual is part of that product. It contains important information concerning operation and handling. Keep these instructions for future reference and give it to third person in case you gave the product. Service centre Graupner Central Service Graupner GmbH Henriettenstraße 96 D-73230 Kirchheim / Teck Servicehotline (+49) (0)7021/722-130 Monday - Thursday: 9:15 am -4:00 pm Friday: 9:15 am - 1:00 pm service@graupner.de Graupner in Internet For the service centers outside Germany please refer to our web site www.graupner.de 5 / 16
Intended use The Kingpad mc-32 Edition regulates and controls the lighting and special functions in a vehicle model over only 1 channel of the transmitter. The Kingpad mc-32 Edition is designed exclusively to be used in battery-powered, radio controlled models, any other use is not allowed. For any improper use no guarantee or liability is assumed. Read through this entire manual before you attempt to install or use the Kingpad mc-32 Edition. Graupner/SJ constantly works on the development of all products; we reserve the right to change the item, its technology and equipment. Target group The item is not a toy. It is not suitable for children under 14. The installation and operation of the Kingpad mc-32 Edition must be performed by experienced modellers. If you do not have sufficient knowledge about dealing with radio-controlled models, please contact an experienced modeller or a model club. Package content Kingpad mc-32 Edition with connection cable 5 poles XH connector (single) Patch cable Manual Required accessories Graupner Central Module (No.3975) LEDs for model lightning. To use the 2nd function level the IRAM Module so as IR-TX are required. Please refer to www.pistenking.de 6 / 16
Technical data Kingpad mc-32 Edition Connection cable keys Dimensions Attachment to the transmitter Connector type 4 poles 12 on 2 levels 73.5 x 30 x 4 mm Glue pads 5 poles XH Note You will find the technical description of the required Kingbus central module on www.graupner.de directly at the product page (No.3975) Characteristics 11 keys for light control 1 key for level switch 11 keys for special functions A total of 22 control functions possible Requires only 1 transmitter channel 7 / 16
Symbol description! Always observe the information indicated by this warning sign. Particularly those which are additionally marked with the words CAU- TION or WARNING. The signal word WARNING indicates the potential for serious injury, the signal word CAUTION indicates possibility of lighter injuries. The signal word Note indicates potential malfunctions. Attention indicates potential damages to objects. Safety notes! General These safety instructions are intended not only to protect your own and other people s safety, but also to protect the product. Therefore please read this section very carefully before using the product!. Do not leave the packaging material lying around, this could be a dangerous toy for children. Persons, including children, with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, or not capable to use safely the transmitter must not use the transmitter without supervision or instruction by a responsible person. Operation and use of radio-controlled models needs to be learnt! If you have never driven such a model, then start extra carefully and make sure to be familiar with the reactions of the model to the remote control commands. Proceed always responsibly. This also means that you have for your own protection liability insurance. Protect all equipment from dust, dirt, moisture. All equipment must be protected from vibration as well as excessive heat or cold. The models may only be operated remotely in normal outside temperatures such as from -10 C to +55 C. 8 / 16
For your safety by handling the transmitter! WARNING Also while programming the transmitter, make sure that a connected motor cannot accidentally start. Disconnect the fuel supply or drive battery beforehand. 9 / 16
Declaration of conformity Kingpad mc-32 Edition Graupner/SJ declares that the product is conform to EU norms. WEEE-Reg.-Nr.: DE 42466037 Product description The Kingpad (KP) is made with the SMD technology. With this module, the Graupner / Kingbus lighting system can be controlled. This item has been tested in accordance with EU directives and complies with the legal requirements. 10 / 16
Notes on environmental protection Disposal notes If this symbol is on the product, instructions for use or packaging, it indicates that the product may not be disposed with normal household waste once it has reached the end of its service life. It must be turned over to a recycling collection point for electric and electronic apparatus. Individual markings indicate which materials can be recycled. You make an important contribution to protection of the environment by utilizing facilities for reuse, material recycling or other means of exploiting obsolete equipment. Batteries must be removed from the unit and disposed of separately at an appropriate collection point. Please inquire with local authorities about the responsible waste collection locations. Care and maintenance P Notes on care The product does not need any maintenance, it works so as it is without any special care. In your own interest please protect the model from dust, dirty and humidity! Warranty certificate The Graupner, Henriettenstrassee 96, 73230 Kirchheim/Teck grants from the date of purchase of this product for a period of 24 months. The warranty applies only to the material or operational defects already existing when you purchased the item. Damage due to misuse, wear, overloading, incorrect accessories or improper handling are excluded from the guarantee. The legal rights and claims are not affected by this guarantee. Please check exactly defects before a claim or send the product, because we have to ask you to pay shipping costs if the item is free from defects. The present construction or user manual is for informational purposes only and may be changed without prior notice. The current version can be found on the Internet at www.graupner.de on the relevant product page. In addition, the company Graupner has no responsibility or liability for any errors or inaccuracies that may appear in construction or operation manuals. Not liable for printing errors. 11 / 16
Installation / Connection Procedure: The Kingpad is connected to any proportional channel (5 pins). A switching channel (3 pins) is not suitable! The XH plug has a reverse polarity protection. In the model, this separate channel from the receiver must be connected to the "Kingpad" input on the Graupner central module. Driving and steering channel must continue to remain connected to the central module as well! First, remove the built-in switches and the aluminum trim board Drill a 4 mm hole in the center of the plastic housing Now the cables WITHOUT plugs are led through the hole. Now remove the protective adhesive and place the pad in the recess of the transmitter. Please push gently! Bundle the cables of the Kingpad with the existing switch cables 12 / 16
in the transmitter. Now the plugs are plugged into the white XH plug as shown below. The 5 pin XH connector can now be plugged into a free slot. The installation of the hardware is complete. The Kingpad is assigned to a receiver channel via the menu item "Switch assignation" in the transmitter menu. 13 / 16
Setting the Kingpad A co-ordination between the Graupner / Kingpad mc Edition and the Graupner central module must take place so that the perfect function is guaranteed. Proceed as follows: Make sure there is a connection between the remote control and the receiver. Connect the steering channel to the "Kingpad" input on the Graupner central module! Press the white Prog button on the Kingbus central module for more than 2 seconds until the yellow LED flashes in a second rhythm Push the upper left button. As confirmation for a detected key, the Prog-LED on the KBCM goes off and remains off when pressed! Release the button. The Prog-LED flashes again and the next key can be read. Press the individual keys one after the other; starting from top left to right and then bottom left to right! After the twelfth key (S), the flashing key must be pressed again. This will cause the Kingbus central module to automatically exit programming mode and return to normal mode. The Kingpad is now set and it can be used 14 / 16
Operation By pressing a key, the light or the function is switched on, it is switched off by pressing it again. The S key switches between the light level and the function level. Exceptions High beam: not fixed position switch when dipped beam is off. High beam only goes on as long as the button is pressed (flashing light) Turn signal right / left: turn signal is activated by pressing a button. Press again to switch it off again. But it can also be switched off by appropriate steering deflection and return to the middle position. In addition, an active turn signal is turned off by activating the other side. Fog light / tail light: When pressed for the first time, the front fog light will switch on. After pressing again, the rear fog light comes on. Press again to turn off both functions Functions 2nd level The 2nd function level (color-coded functions) is intended for the trailer module (IRAM). For the reference, connection and function, please visit the page of the company Pistenking: www.pistenking.de péáí ÉR 15 / 16