Digitale manometers TYPE: ETD-0, klasse 0.5 KASTDIAMETER: 63 MM Bereiken: 0-.6 bar tot 0-250 bar Nauwkeurigheid: 0,5% Aansluiting: /4 BSP RVS 304 (EN837-) Drukeenheid: bar, mbar, PSI, mpa, mh 2 O Batterij: standaard, CR 2450, duur > 800 h Display: LC display, 4.5-digit 7-segment display Specificaties Min-Max functie met reset functie. Auto-zero. Automatic switch-off functie. Rotable housing and display. COMPLEET OVERZICHT TECHNISCHE INFORMATIE ZIE VOLGENDE BLADZIJDE 90002 90003 90004 90006 9000 9006 90025 90040 90060 9000 9060 90250 0 -.6 0-2.5 0-4 0-6 0-0 0-6 0-25 0-40 0-60 0-00 0-60 0-250
Digitale Manometer - Type ETD-0 / Bladzijde 2 Input Pressure Nominal pressure gauge [bar].6 2.5 4 6 0 6 25 40 60 00 60 250 Overpressure [bar] 4 4 0 0 20 40 40 00 00 200 400 400 Burst pressure [bar] 7 7 5 5 35 70 70 50 50 250 450 450 Vacuum resistance unlimited Performance Accuracy ± 0.5 % FSO BFSL Measuring rate /sec Long term stability ± 0.3 % FSO / year accuracy according to IEC 60770 minimum value setting (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Tolerance band ± 0.5 % FSO / 0 K (typ.) in compensated range 0... 50 C Permissible temperatures Permissible temperatures medium: -25... 85 C environment: 0... 70 C storage: 0... 70 C Materials Pressure port / housing stainless steel.430 (304) Display housing PA 6.6, Polycarbonate Seals (media wetted) FKM others on request Diaphragm ceramics Al 2O 3 96 % Media wetted parts pressure port, seals, diaphragm Miscellaneous Display LC-Display, visible range 36 x 5 mm; 4.5-digit 7-segment-display, digit size 8.5 mm, range of indication ±999 Electromagnetic compatibility emission and immunity according to EN 6326 Supply 3 V lithium battery (CR 2450) Data storage EEPROM (non-volatile) Ingress protection IP 65 Installation position any Weight plastic: approx. 50 g Operational life of battery min. 500 h with permanent operation Mech. operational life > 00 x 0 6 pressure cycles CE-conformity EMC directive 2004/08/EC pressure equipment directive: 97/23/EC (Modul A) 2 2 This directive is only valid for devices with maximum permissible overpressure > 200 bar. Dimensions (in mm) display housing plastic 0.0 G/4" DIN 3852 /4" NPT 2
Digitale manometers TYPE: ETD-02, klasse 0.25 KASTDIAMETER: 75,5 MM Bereiken: 0-400 mbar tot 0-600 bar * Nauwkeurigheid: 0,25% Aansluiting: /4 BSP RVS 36L (EN837-) Drukeenheid: bar, mbar, PSI, InHg, cmhg, mmhg, hpa, kpa, mpa, mh 2 O, InH 2 O Batterij: standby tijd +/- 5 jaar Display: 2-line display 4.5-digit 7 segment display 6-digit 4-segment additional display Specificaties Min-Max functie met reset functie. Auto-zero. Automatic switch-off functie. Rotable housing and display. COMPLEET OVERZICHT TECHNISCHE INFORMATIE ZIE VOLGENDE BLADZIJDE 90200 902002 902003 902004 902006 90200 90206 902025 902040 902060 90200 90260 902250 902400 902600 0-0 -.6 0-2.5 0-4 0-6 0-0 0-6 0-25 0-40 0-60 0-00 0-60 0-250 0-400 0-600 * Lage druk prijs op aanvraag 3
Digitale Manometer - Type ETD-02 / Bladzijde 2 Input pressure range Nominal pressure gauge [bar] 0.4 0.6.6 2.5 4 6 0 6 25 40 60 00 60 250 400 600 Nominal pressure abs. [bar] - 0.6.6 2.5 4 6 0 6 25 40 60 00 60 250 400 600 Overpressure [bar] 2 2 4 4 0 0 20 40 40 00 00 200 400 400 600 800 Burst pressure [bar] 2 4 4 5 5 2 2 25 50 50 20 20 250 500 500 650 880 Vacuum pressure - 0 bar, overpressure: 4 bar, burst pressure: 7 bar Vacuum resistance P N bar: unlimited vacuum resistance P N < bar: on request Performance Accuracy ± 0.25 % FSO BFSL Measuring rate 5/sec accuracy according to IEC 60770 minimum value setting (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Thermal effects ± 0.2 % FSO / 0 K in compensated range -25... 85 C Permissible temperatures Permissible temperatures medium: -20... 85 C environment: -20... 70 C storage: -30... 80 C Mechanical stability Vibration 5 g RMS (25... 2000 Hz) according to DIN EN 60068-2-6 Shock 00 g / msec according to DIN EN 60068-2-27 Materials Pressure port / housing stainless steel.4404 (36L) Display housing PA 6.6, Polycarbonate Seals (media wetted) FKM Diaphragm ceramics Al 2O 3 96 % Media wetted parts pressure port, seals, diaphragm Miscellaneous Display LC-Display, visible range 40 x 30 mm; 4.5-digit 7-segment main display, digit height mm, range of indication ±9999; 6-digit 4-segment additional display, digit height 7.5 mm Electromagnetic compatibility emission and immunity according to EN 6326 Supply 3.6 V lithium battery; 2 piece (/2 AA) Data storage EEPROM (non-volatile) Ingress protection IP 65 Installation position any Weight approx. 300 g AD-converter solution 4 Bit Operational life of battery Standby-Modus: approx. 5 years Mechanical operational life > 00 x 0 6 pressure cycles CE-conformity EMC directive: 2004/08/EC pressure equipment directive: 97/23/EC (Modul A) 2 2 This directive is only valid for devices with maximum permissible overpressure > 200 bar. Dimensions (in mm) G/2" EN 837 G/4" EN 837 /4" NPT /2" NPT dimensioning value A: pressure port mm: G/2" EN 837 62.5 G/4" EN 837 54.5 /4" NPT 54.5 /2" NPT 60.5 The specifications given in this document represent the state of engineeringat the time of publishing. We reserve the right to make modifications to the specifications and materials. 4
Digitale manometers TYPE: ETD-03, klasse 0. KASTDIAMETER: 75,5 MM Bereiken: 0-400 mbar tot 0-600 bar * Nauwkeurigheid: 0,% Aansluiting: /4 BSP RVS 36L (EN837-) Drukeenheid: bar, mbar, PSI, InHg, cmhg, mmhg, hpa, kpa, mpa, mh 2 O, InH 2 O Batterij: standby tijd +/- 5 jaar Display: 2-line display 4.5-digit 7 segment display 6-digit 4-segment additional display Specificaties Min-Max functie met reset functie. Auto-zero. Automatic switch-off functie. Rotable housing and display. COMPLEET OVERZICHT TECHNISCHE INFORMATIE ZIE VOLGENDE BLADZIJDE 903002 903003 903004 903006 90300 90306 903025 903040 903060 90300 90360 903250 903400 903600 90360 426,00 0 -.6 0-2.5 0-4 0-6 0-0 0-6 0-25 0-40 0-60 0-00 0-60 0-250 0-400 0-600 0-000 * Lage druk prijs op aanvraag 5
Digitale Manometer - Type ETD-03 / Bladzijde 2 Input pressure ranges Nominal pressure gauge [bar] 0.0 0.6 0.25 0.40 0.60.6 2.5 4 6 Nominal pressure abs. [bar] - - - 0.40 0.60.6 2.5 4 6 Overpressure [bar] 0.5 2 5 5 0 0 20 40 Burst pressure [bar].5.5.5 3 7.5 7.5 5 5 25 50 Nominal pressure gauge / abs. [bar] 0 6 25 40 60 00 60 250 400 600 Overpressure [bar] 40 80 80 05 20 20 600 050 050 250 Burst pressure [bar] 50 20 20 20 420 420 000 250 250 250 Vacuum pressure - 0 bar, overpressure: 5 bar, burst pressure: 7.5 bar other vacuum ranges on request Vacuum resistance P N bar: unlimited vacuum resistance; P N < bar: on request Performance Accuracy ± 0.25 % FSO BFSL nominal pressure: < 0.4 bar: ± 0.25 % FSO BFSL Measuring rate 5/sec Long term stability ± 0. % FSO / year at reference conditions accuracy according to IEC 60770 minimum value setting (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) Nominal pressure P N [bar] - 0 0.40 > 0.40 Tolerance band [% FS] ± 0.75 ± ± 0.75 in compensated range [ C] -20... 85 C 0... 70 C -20... 85 C Permissible temperatures Permissible temperatures medium: -20... 85 C environment: -20... 70 C storage: -30... 80 C Mechanical stability Vibration 5 g RMS (25 2000 Hz) according to DIN EN 60068-2-6 Shock 00 g / msec according to DIN EN 60068-2-27 Materials Pressure port / Housing stainless steel.4404 (36 L) Display housing PA 6.6, polycarbonate Seals (media wetted) FKM Diaphragm stainless steel.4435 (36 L) Media wetted parts pressure port, seals, diaphragm Miscellaneous Display LC display, visible range 40 x 30 mm; 4.5-digit 7-segment-display, digit height mm, range of indication ±9999; 6-digit 4-segment additional display, digit height 7.5 mm Electromagnetic compatibility emission and immunity according to EN 6326 Supply 3.6 V Lithium battery; 2 piece (type /2 AA) Data storage EEPROM (non-volatile) Ingress protection IP 65 Installation position any 2 Weight approx. 300 g AD-converter solution 4 Bit Operational life of battery standby mode: approx. 5 years mech. operational life > 00 x 0 6 pressure cycles CE-conformity EMC Directive: 2004/08/EG Pressure Equipment Directive: 97/23/EG (Modul A) 3 2 The digital pressure gauge is calibrated in a vertical position with the pressure connection down. If this position is changed on installation there can be slight deviations in the zero point for devices with stainless steel sensor and pressure range PN bar. 3 This directive is only valid for devices with maximum permissible overpressure > 200 bar. Dimensions (in mm) G/2" EN 837 G/4" EN 837 /2" NPT /4" NPT The specifications given in this document represent the state of engineeringat the time of publishing. We reserve the right to make modifications to the specifications and materials. 6
Digitale manometers TYPE: ETD-04, klasse 0.05 KASTDIAMETER: 00 MM Bereiken: 0-00 mbar tot 0-2200 bar Nauwkeurigheid: 0,05% Aansluiting: /2 BSP RVS 36L (EN837-) Drukeenheid: bar, mbar, PSI, InHg, mmhg, hpa, kpa, mpa, mh 2 O Batterij: > 2000 h (3x.5V, AA) Verwisselbare druksensoren tm 400 Bar Optie voor datalogger = software + USB 2.0 Optie: ATEX/EX uitvoering Zone Specificaties Min-Max functie met reset functie. Auto-zero. Automatic switch-off functie. COMPLEET OVERZICHT TECHNISCHE INFORMATIE ZIE VOLGENDE BLADZIJDE Bestelcode Prijs e Aanwijzing ETD-04 ETD-04/ Display vanaf 763,00 vanaf 520,00 - + 0 Bar tm 0-400 Bar ETD-04/ losse sensor vanaf 245,00 + 0 Bar tm 0-400 Bar ETD-04/HP* (hoge druk) vanaf 990,00 600 Bar tm 2200 Bar Met vaste druktransmitter *Details ETD-04/HP zie blz 9 90500 905050 54,75 50,00 Peli case koffer + foam Software + USB kabel 7
Digitale Manometer - Type ETD-04 / Bladzijde 2 Input pressure Nominal pressure gauge [bar] - 0 0.0 0.6 0.25 0.40 0.60.6 2.5 4 6 Nominal pressure abs. [bar] - - - - 0.40 0.60.6 2.5 4 6 Overpressure [bar] 5 2 5 5 0 0 7.5 35 Burst pressure [bar] 7.5.5.5.5 3 7.5 7.5 5 5 25 50 Nominal pressure gauge / abs. [bar] [bar] 0 6 25 40 60 00 60 250 400 Overpressure [bar] 35 80 80 05 20 600 600 000 000 Burst pressure [bar] 50 20 20 20 420 000 000 250 250 Vacuum resistance P N bar: unlimited vacuum resistant; P N < bar: on request Input pressure Nominal pressure gauge [bar] 600 000 600 2000 2200 Overpressure [bar] 800 400 2200 2800 2800 Performance Accuracy standard for P N 0.4 bar: ± 0.05 % BFSL standard for P N < 0.4 bar: ± 0.25 % BFSL Long term stability ± 0. % FSO / year at reference conditions Measuring rate / Display or 2 measurements per second accuracy according to IEC 60770 minimum value setting (non-linearity, hysteresis, repeatability) Thermal effects (Offset and Span) for nominal pressure ranges P N 60 bar: included in the accuracy information Temperature error for nominal pressure ranges P N > 60 bar: tolerance band ± 0.75 % FSO (is valid for compensated range 0... 50 C) Permissible temperatures medium: -0... 55 C Permissible temperatures environment: -0... 55 C storage: -20... 70 C Materials ETd-04 ETd-04 HP Pressure port / housing stainless steel.4404 (36L) stainless steel.4542 (7-4 PH) /.4404 (36L) Display housing stainless steel.430 (304) stainless steel.430 (304) Seals (media wetted) FKM, without (welded version) without Diaphragm Stainless steel.4435 (36L) stainless steel.4542 (7-4 PH) Media wetted parts pressure port, seal, diaphragm pressure port, diaphragm Explosion protection AX6-DM0 IBExU2ATEX08 X zone : II 2G Ex ia IIC T4 Gb Miscellaneous Display graphic LC display: visible area 55 x 46 mm; (resolution 28x64) figure height 5.5 mm (displaying of pressure value) measured value display: max. 7 digits, depending on pressure range temperature display, time, 00-segment-bargraph, potential input value background illumination: illumination period and intensity adjustable accuracy: ± 2 K Temperature display range resolution: 0, K display: -0 55 C adjustable units [bar], [mbar], [psi], [inhg], [cmhg], [mmhg], [hpa], [kpa], [Mpa], [mh 2O], [mmh 2O], [inh 2O], [kg/cm²] recording pressure values and sensor temperature (min, hrs, daily at a defined time) Data logger max. 8500 values modes: cyclic, linear measuring value interval adjustable Current consumption without background illumination: approx.,3 ma with background illumination: approx. 6 ma (depending on adjusted intensity) standby mode: approx.,2 µa Supply 3x,5 V: Duracell Plus battery, DUR087033, AA (LR6) Ingress protection IP 67 Mounting position 2 any Weight approx. 680 g A / D-converter resolution 6 bit Battery life standard use: > 2.000 h standby mode: at least 5 years Load cycles > 00 x 0 6 CE-conformity EMC directive: 2004/08/EC pressure equipment directive: 97/23/EC (Module A) 3 electromagnetic compatibility: according to EN 6326 8
Digitale Manometer - Type ETD-04 en ETD-04/HP - Detailinformatie ETd-04 standard optional G/2" DIN 3852 G/4" DIN 3852 G/2" DIN 3852 with flush sensor 4 /2" NPT /4" NPT G /4" EN 837 G/2" EN 837 5 G/2" DIN 3852 G/4 EN 837 open pressure port internal thread, welded 4, 6 ETd-04 HP standard optional G/2 EN 837 5 9/6-8 UNF internal thread M20x,5 internal thread metrical threads and other variations on request 9